The layout of struct usbfs_conninfo_ex was changed in the final revision
of the patch, so the corresponding ioctl number needs to change to
match, since the parameter size is encoded in the ioctl.
The new size is 0x18 or 24, which matches the struct usbfs_conninfo_ex
layout with 7 ports.
BUG=chromium:977020
TEST=Attach Android device to Linux VM on nami
Change-Id: Iec60b4c04880d7d2c71fdea49cfdf7fb5a75f5c6
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1669530
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Commit-Queue: Dmitry Torokhov <dtor@chromium.org>
The updated version of libusb uses USBFS_CONNECTINFO and
USBFS_CONNINFO_EX ioctls, as well as readlink and lseek syscalls,
so let's enable them.
BUG=b:133773289
TEST=Try attaching a USB device to Crostini VM.
Change-Id: Ibdcab2da9abe1c0bb35c989d9d62b44ce403e268
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1650534
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Dmitry Torokhov <dtor@chromium.org>
This enables the full firmware update/reset/use device in application
mode sequence for Edge TPU USB Accelerator.
There is a bit of a UI hiccup: once the firmware update and reset is
complete, the device re-enumerates with a different VID/PID, and the
"Connect to Linux" prompt shows up again. The user must re-affirm that
the device should be connected to Linux to proceed with using the Edge
TPU. This may be unavoidable - I'm not sure if we can tell the
difference between a newly-inserted device and a reset one.
Allowing USBDEVFS_DISCONNECT_CLAIM should be safe, since it can only
operate on file descriptors passed into the xhci device jail.
BUG=chromium:831850
TEST=Run Edge TPU Accelerator demo and verify that it can update FW
Change-Id: I3d61c7bd914830ce25448b1ae4d60e1c16f10aed
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1599881
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
1. Removed for device slot reset and evaluate context. The verification was
unnecessary and may cause some guest kernel operations to fail.
2. The context was updated after dequeue pointer set
3. Reset device when it's attached.
4. Add seccomp rules to allow the above reset.
The verification was copied from another implementation which works for
adb, but does not work with serial devices. The verification is also not
part of the spec, so we removed it here.
BUG=b:131336977
TEST=local build and test
Change-Id: Ifd7994ff5512346d1bab27654e60c97a602da8a6
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Zach Reizner <zachr@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1558934
Tested-by: kokoro <noreply+kokoro@google.com>
There is no such syscall as fseek as far as I can tell. There is lseek,
which would be how fseek is implemented in libc, and it is already
included in the policy.
BUG=chromium:936633
TEST=parse_seccomp_policy seccomp/x86_64/tpm_device.policy
Change-Id: Ifb891395d7447d8b81cb1b17af18c49e5d5fc96f
Reviewed-on: https://chromium-review.googlesource.com/1518490
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Due to repeated syscall rules in gpu_device and common_device policies,
minijail fails to compile the gpu_device.policy. This change unrefactors
that policy so that it may compile properly.
BUG=chromium:936633,chromium:837073
TEST=vmc start --enable-gpu termina
Change-Id: I09ab9296247279c3a9ba6e3a6852e2a7ae2612ed
Reviewed-on: https://chromium-review.googlesource.com/1493424
Commit-Ready: Dylan Reid <dgreid@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Tested by running the following on a grunt board (Barla) in dev mode
together with CL:1496910:
sudo crosvm run \
--root rootfs.ext4 \
--socket crosvm.sock \
--seccomp-policy-dir seccomp \
--software-tpm \
-p init=/bin/bash \
-p panic=-1 \
vmlinux.bin
and confirming that /dev/tpm0 and /dev/tpmrm0 are present in the VM.
I needed to override the common device policy's `open` and `openat` and
was not able to get that working with the existing @include.
Note: untested on arm.
BUG=chromium:921841
TEST=manual testing on grunt
Change-Id: Ied7f18a631ce8c0ae280f8b6c01511ca20c3d1c8
Reviewed-on: https://chromium-review.googlesource.com/1496909
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
The advantage of seqpacket is that they are connection oriented. A
listener can be created that accepts new connections, useful for the
path based VM control sockets. Previously, the only bidirectional
sockets in crosvm were either stream based or made using socketpair.
This change also whitelists sendmsg and recvmsg for the common device
policy.
TEST=cargo test
BUG=chromium:848187
Change-Id: I83fd46f54bce105a7730632cd013b5e7047db22b
Reviewed-on: https://chromium-review.googlesource.com/1470917
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
The glibc realloc() implementation may call the mremap syscall in some
cases; we currently allow mremap in x86_64/common_device.policy but not
the arm equivalent, but this path appears to be reachable on any Linux
platform[1]. Add mremap to the arm policy as well for consistency.
mremap is no more powerful than the existing mmap and munmap syscalls,
so I believe this is safe to allow for all device processes.
Also reorder the mmap2 line in the arm policy so it is in alphabetical
order and can be more easily compared to the x86_64 policy.
BUG=chromium:927919
TEST=Boot crosvm on kevin
[1]: https://sourceware.org/git/?p=glibc.git;a=blob;f=malloc/malloc.c;h=6e766d11bc85b6480fa5c9f2a76559f8acf9deb5;hb=HEAD#l2854
Change-Id: Ie51a21baf30d3e37ce3adacf8e255f981613543d
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1459020
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
This allows decoupling input from the wayland socket while using a
standard virtio device for it. The proposed virtio input spec can be
found at
https://www.kraxel.org/virtio/virtio-v1.0-cs03-virtio-input.pdf, it
has already been implemented in qemu and (guest) kernel support exists
since version 4.1.
This change adds the following options to crosvm:
--evdev: Grabs a host device and passes it through to the guest
--<device>: Creates a default configuration for <device>,
receives the input events from a unix socket. <device> can be
'keyboard', 'mouse' or 'trackpad'.
Bug=chromium:921271
Test=booted on x86 linux and manually tried virtio-input devices
Change-Id: I8455b72c53ea2f431009ee8140799b0797775e76
Reviewed-on: https://chromium-review.googlesource.com/1412355
Commit-Ready: Jorge Moreira Broche <jemoreira@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
By default virglrenderer logs to stderr with VREND_DEBUG. dup stdout
which is logged via logger to stderr so that virglrenderer logs can be
seen.
BUG=chromium:925590
TEST=cat /var/log/messages
Change-Id: I3e1a5056dab9cfd895867b1835b421b144ee536b
Reviewed-on: https://chromium-review.googlesource.com/1441352
Commit-Ready: David Riley <davidriley@chromium.org>
Tested-by: David Riley <davidriley@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This CL adds a "tpm" Cargo cfg to crosvm which enables a TPM device
backed by libtpm2 simulator.
Tested by running the following inside cros_sdk:
LIBRARY_PATH=~/src/minijail LD_LIBRARY_PATH=~/src/minijail \
cargo run --release \
--features tpm \
-- \
run \
-r rootfs.ext4 \
--seccomp-policy-dir seccomp/x86_64/ \
-p init=/bin/bash \
-p panic=-1 \
--disable-sandbox \
vmlinux.bin
with a Linux image built from CL:1387655.
The TPM self test completes successfully with the following output:
https://paste.googleplex.com/5996075978588160?raw
Justin's TPM playground runs with the following trace output.
https://paste.googleplex.com/4909751007707136?raw
Design doc: go/vtpm-for-glinux
TEST=ran TPM playground program inside crosvm
TEST=local kokoro
BUG=chromium:911799
Change-Id: I2feb24a3e38cba91f62c6d2cd1f378de4dd03ecf
Reviewed-on: https://chromium-review.googlesource.com/1387624
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
It looks like free() will sometimes try to open
/proc/sys/vm/overcommit_memory in order to decide whether to return
freed heap memory to the kernel; change the seccomp filter to fail the
open syscalls with an error code (ENOENT) rather than killing the
process.
Also allow madvise to free memory for the same free() codepath.
BUG=chromium:888212
TEST=Run fio loop test on kevin
Change-Id: I1c27b265b822771f76b7d9572d9759476770000e
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1305756
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
This is needed to make sure seccomp work with glibc 2.27
BUG=chromium:897477
TEST=None
Change-Id: I101aa07bffd8db2b449be1a697dafcd7d6f1cb58
Reviewed-on: https://chromium-review.googlesource.com/1294729
Commit-Ready: Yunlian Jiang <yunlian@chromium.org>
Tested-by: Yunlian Jiang <yunlian@chromium.org>
Reviewed-by: Mike Frysinger <vapier@chromium.org>
This adds openat to a seccomp policy file if open is already there.
We need this because glibc 2.25 changed it system call for open().
BUG=chromium:894614
TEST=None
Change-Id: Ie5b45d858e8d9ea081fd7bfda81709bda048d965
Reviewed-on: https://chromium-review.googlesource.com/1292129
Commit-Ready: Yunlian Jiang <yunlian@chromium.org>
Tested-by: Yunlian Jiang <yunlian@chromium.org>
Reviewed-by: Manoj Gupta <manojgupta@chromium.org>
In deallocate_cluster(), we call set_cluster_refcount() to unref the
cluster that is being deallocated, but we never actually added the
deallocated cluster to the unref_clusters list. Add clusters whose
refcounts reach 0 to the unref_clusters list as well.
Also add mremap() to the seccomp whitelist for the block device, since
this is being triggered by libc realloc() and other devices already
include it in the whitelist.
BUG=chromium:850998
TEST=cargo test -p qcow; test crosvm on nami and verify that qcow file
size stays bounded when creating a 1 GB file and deleting it
repeatedly
Change-Id: I1bdd96b2176dc13069417e0ac77f0768f9f26012
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1259404
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Add newfstatat for x86 and fstatat64 for arm to the seccomp policy file
for the 9p device and server program.
BUG=chromium:886535
TEST=`vmc share termina foo` and then `ls /mnt/shared` inside the VM
works
Change-Id: I6871f54ae885e080dca0ea5751987d59c55a59d6
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1232556
Reviewed-by: Stephen Barber <smbarber@chromium.org>
The path to the wayland socket changed, so the previous whitelist based
on the connect() arg2 sockaddr_un size now fails.
BUG=None
TEST=Verify that release build of crosvm starts again on chromebook
Change-Id: I3c30977e7c1487b937d69e1dbce4b7fd87136978
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1234827
Reviewed-by: David Riley <davidriley@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
"devices: block: Flush a minute after a write" introduced new timerfd_
syscalls into the block device but did not add them to the seccomp
whitelist.
BUG=chromium:885238
TEST=Run crosvm in multiprocess mode and verify that it boots
Change-Id: I1568946c64d86ab7dba535a430a8cbe235f64454
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1231513
Commit-Ready: Dylan Reid <dgreid@chromium.org>
Tested-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Sandboxing only works when started as chronos via concierge client. If
started directly via crosvm as root, the jail will not have proper group
permissions to access the Wayland socket.
BUG=chromium:837073
TEST=build with --features=gpu; null_platform_test without --disable-sandbox
CQ-DEPEND=CL:1213779
Change-Id: I6331f7ae1f5b99d31ad44cf158f72337294771f0
Reviewed-on: https://chromium-review.googlesource.com/1181168
Commit-Ready: David Riley <davidriley@chromium.org>
Tested-by: David Riley <davidriley@chromium.org>
Reviewed-by: Jorge Lucangeli Obes <jorgelo@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Discard and Write Zeroes commands have been added to the virtio block
specification:
88c8553838
Implement both commands using the WriteZeroes trait.
BUG=chromium:850998
TEST=fstrim within termina on a writable qcow image
Change-Id: I33e54e303202328c10f7f2d6e69ab19f419f3998
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1188680
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Seccomp policy for ARM hosts was recently moved from aarch64 to arm to
accurately match the ABI used on the host. Move 9s policy to match this.
BUG=none
TEST=vm.Webserver on kevin succeeds
Change-Id: I97daa524edcd411618561ce07525738bc65457cb
Reviewed-on: https://chromium-review.googlesource.com/1180470
Commit-Ready: Stephen Barber <smbarber@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Sonny Rao <sonnyrao@chromium.org>
Implement a new virtio_9p device to be used for sharing directories with
the VM.
BUG=chromium:703939
TEST=mount inside a VM and run `bonnie++ -r 256`
Append the shared directory to the crosvm command line:
--shared-dir /path/to/dir:test_9p
Then mount in the guest:
mkdir /tmp/9p
mount -t 9p -o trans=virtio test_9p /tmp/9p -oversion=9p2000.L
Or for a 9p root:
run --shared-dir /mnt/vm_root:/dev/root -p 'root=/dev/root ro rootflags=ro,trans=virtio,version=9p2000.L,cache=loose rootfstype=9p' vmlinux.bin
CQ-DEPEND=CL:1065170
Change-Id: I41fc21306ab5fa318a271f172d7057b767b29f31
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1065173
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Add the 9s crate, which provides an executable that can serve the 9p
file system protocol. It initially only supports connections over vsock
but can easily be extended to support network and unix domain socket
based connections.
BUG=chromium:703939
TEST=Run the server, have maitred connect to it over vsock, mount the
9p file system in the guest kernel, share it with the penguin
container, and run `bonnie++ -r 256 -s 512`
CQ-DEPEND=CL:1121550, CL:1166446
Change-Id: Ia0c72bcf29188bba4c07b6c0a2dd5a83d02339b5
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1112870
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Implement a policy for the balloon device so that it starts taking
memory away from the VM when the system is under low memory conditions.
There are a few pieces here:
* Change the madvise call in MemoryMapping::dont_need_range to use
MADV_REMOVE instead of MADV_DONTNEED. The latter does nothing when
the memory mapping is shared across multiple processes while the
former immediately gives the pages in the specified range back to the
kernel. Subsequent accesses to memory in that range returns zero
pages.
* Change the protocol between the balloon device process and the main
crosvm process. Previously, the device process expected the main
process to send it increments in the amount of memory consumed by the
balloon device. Now, it instead just expects the absolute value of
the memory that should be consumed. To properly implement the policy
the main process needs to keep track of the total memory consumed by
the balloon device so this makes it easier to handle all the policy in
one place.
* Add a policy for dealing with low memory situations. When the VM
starts up, we determine the maximum amount of memory that the balloon
device should consume:
* If the VM has more than 1.5GB of memory, the balloon device max is
the size of the VM memory minus 1GB.
* Otherwise, if the VM has at least 500MB, the balloon device max is
50% of the size of the VM memory.
* Otherwise, the max is 0.
The increment used to change the size of the balloon is defined as
1/16 of the max memory that the balloon device will consume. When the
crosvm main process detects that the system is low on memory, it
immediately increases the balloon size by the increment (unless it has
already reached the max). It then starts 2 timers: one to check for
low memory conditions again in 1 seconds (+ jitter) and another to
check if the system is no longer low on memory in 1 minute (+ jitter)
with a subsequent interval of 30 seconds (+ jitter).
Under persistent low memory conditions the balloon device will consume
the maximum memory after 16 seconds. Once there is enough available
memory the balloon size will shrink back down to 0 after at most 9
minutes.
BUG=chromium:866193
TEST=manual
Start 2 VMs and write out a large file (size > system RAM) in each.
Observe /sys/kernel/mm/chromeos-low_mem/available and see that the
available memory steadily decreases until it goes under the low memory
margin at which point the available memory bounces back up as crosvm
frees up pages.
CQ-DEPEND=CL:1152214
Change-Id: I2046729683aa081c9d7ed039d902ad11737c1d52
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1149155
Reviewed-by: Sonny Rao <sonnyrao@chromium.org>
These policies are not for aarch64 but use the 32-bit system calls.
We call it aarch64 support because that's what we're targetting for
the guest kernel, but it doesn't really make any sense to call the
seccomp policies aarch64 when we're building a 32-bit binary.
We can add real aarch64 seccomp policies when we start building a
aarch64 crosvm binary.
BUG=chromium:866197
TEST=emerge-kevin crosvm, run vm_CrosVmStart
CQ-DEPEND=CL:1145903
Change-Id: I7c5e70fbc127e4209ed392cfcf10ea36a6dd4b2c
Reviewed-on: https://chromium-review.googlesource.com/1145909
Commit-Ready: Sonny Rao <sonnyrao@chromium.org>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
These syscalls were added to the x86 policy when vfd pipe support was
added, but they were never added to the arm version, for whatever
reason. This is needed to keep crosvm from getting killed by SIGSYS
whenver the user copies to or from guest applications.
BUG=chromium:864218
TEST=on kevin, copy/paste to/from gedit
Change-Id: Ibe385d50e367c362e911badd640bab2c98e07030
Reviewed-on: https://chromium-review.googlesource.com/1145876
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This provides proper synchronization for guest access to
DMABufs.
Virtio wayland device is given access to the DMA_BUF_SYNC ioctl
in order to implement this. Being able to use this directly in
the virtio wayland device process is important as these calls
can sometimes be relatively expensive and they are frequent
enough that avoiding another context switch is useful for good
performance.
TEST=cache-line artifacts no longer noticeable
BUG=chromium:837209
Change-Id: Ibb8d7c01f70ed5b74afd69288015a65186fec52a
Reviewed-on: https://chromium-review.googlesource.com/1076928
Commit-Ready: David Reveman <reveman@chromium.org>
Tested-by: David Reveman <reveman@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
It looks like on ARM we use the real gettimeofday system call when
we're outputting error messages, so we need to whitelist this to avoid
crashing instead of seeing the error messages.
BUG=chromium:843807
TEST=run vm_CrosVmStart and make sure there are no crashes for crosvm
Change-Id: I9f47da8dabe31f0677bcaa1d431e56545e20c9c9
Reviewed-on: https://chromium-review.googlesource.com/1081390
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Signal to the OS that we want these writes committed all the way to
disk. Replace an existing call to flush as that's not sufficient.
Change-Id: I9df9e55d2182e283e15eebc02a54c1ce08434f42
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1060696
Reviewed-by: Zach Reizner <zachr@chromium.org>
Like block_device, also needs to use ftruncate64 instead of ftruncate.
BUG=chromium:840048
TEST=manual test of graphics on kevin
Change-Id: Ib24b12fd681c96ecc2fec796fe480e94a96a0626
Reviewed-on: https://chromium-review.googlesource.com/1050916
Commit-Ready: Sonny Rao <sonnyrao@chromium.org>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Aarch64 seems to use ftruncate64 rather than ftruncate.
BUG=chromium:816692
TEST=run VM on kevin using concierge
Change-Id: I944f52d75fb9f5a3aaf5fe9e85708c48f249bb1a
Reviewed-on: https://chromium-review.googlesource.com/1031175
Commit-Ready: Sonny Rao <sonnyrao@chromium.org>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
The wl device was the last user of the old Poller.
BUG=chromium:816692
TEST=run wayland under crosvm
Change-Id: I6c1c1db2774a6e783b7bd1109288328d75ad2223
Reviewed-on: https://chromium-review.googlesource.com/1000102
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Add a seccomp policy for virtio wayland devices on aarch64.
BUG=chromium:797868
TEST=./build_test passes on all architectures
TEST=crosvm runs on kevin built with USE="kvm_host" with a
wayland socket passed in
Change-Id: I89e9904b48598d78be0721ba8b3242d1b43f7aa3
Reviewed-on: https://chromium-review.googlesource.com/999169
Commit-Ready: Sonny Rao <sonnyrao@chromium.org>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Pipe VFDs are used to send and recieve data offer bytes, often used for
copy/paste and drag/drop operations.
TEST=use copy/paste with wayland app
BUG=chromium:793688
Change-Id: Ifc3f231dcdf90ce6791a98039405c7c404cf6942
Reviewed-on: https://chromium-review.googlesource.com/983037
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Switching to PollContext so that there is one less user of Poller, which
will be removed.
TEST=run any vm with a block device
BUG=chromium:816692
Change-Id: I2e1301ea9d66012262f1fcb69eaeee9f7464f3b3
Reviewed-on: https://chromium-review.googlesource.com/983036
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
- removes old ARMv7a (32-bit) bindings as we're only supporting aarch64
guests right now
- switches both ARMv7 and aarch64 builds to use aarch64 kvm bindings
- adds support for ARMv8 Linux guest with dynamic flattened-device-tree
CQ-DEPEND=990894
BUG=chromium:797868
TEST=./build_test passes on all architectures
TEST=crosvm runs on caroline
TEST=crosvm runs on kevin built with USE="kvm_host"
Change-Id: I7fc4fc4017ed87fd23a1bc50e3ebb05377040006
Reviewed-on: https://chromium-review.googlesource.com/969987
Commit-Ready: Sonny Rao <sonnyrao@chromium.org>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
The mmaps made through the sys_util API are usually for guest memory or
other large shared memory chunks that will pollute the file system with
huge dumps on crash. By using MADV_DONTDUMP, we save the file system
from storing these useless data segments when crosvm crashes.
TEST=./build_test
BUG=None
Change-Id: I2041523648cd7c150bbdbfceef589f42d3f9c2b9
Reviewed-on: https://chromium-review.googlesource.com/890279
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
This really should have been added along with the poll timeout support,
which changed the syscalls used in every jailed device.
TEST=run crosvm with sandboxing enabled
BUG=None
Change-Id: I6129fa589640bb2b85fb4274775192bdd49db672
Reviewed-on: https://chromium-review.googlesource.com/890379
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Using qcow to allow for growable disk. These will be used for user data.
Change-Id: Iefb54eb4255db2ea7693db0020c5f1429acd73fd
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/862629
Reviewed-by: Stephen Barber <smbarber@chromium.org>
The memfd_create flags changed with "add memfd seal support", which
breaks the seccomp filter for the wayland device.
TEST=run a wayland app in crosvm
BUG=chromium:799523
Change-Id: I266e305bc3179a7b9fd105a684de92e944fe1fc6
Reviewed-on: https://chromium-review.googlesource.com/852937
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
The balloon device is used to take regions of unused memory from the
guest and allow other host processes to use that memory.
Change-Id: I06c821365a58672d605fc7555beaec599cae1b15
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/759306
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Suspend/resume can cause syscall restarts and will cause KVM_RUN ioctls
to return with EINTR. Handle these so the VM doesn't shut down.
BUG=none
TEST=vm survives suspend/resume
Change-Id: I1fab624cb8fe0949d341408f0c962c859a034205
Reviewed-on: https://chromium-review.googlesource.com/750054
Commit-Ready: Stephen Barber <smbarber@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
crosvm spawns a lot of processes/threads, and having these all use the same
name as the original process can be confusing. So at least in the instances
where Rust threads are spawned (vs. minijail_fork()), use a thread::Builder
to allow setting the thread name.
BUG=none
TEST=start crosvm, check thread names with top
Change-Id: I6e55ff5fd60f258880bda8e656ab7f9da82c656e
Reviewed-on: https://chromium-review.googlesource.com/742394
Commit-Ready: Stephen Barber <smbarber@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Implement the virtual sockets device using vhost subsystem of the host
kernel to handle data transfer.
BUG=chromium:708267
TEST=build and run maitred in guest VM without issue
Change-Id: I35b542c0fc7e0fd9296f7ba3e1dfce60bf524d15
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/638838
Reviewed-by: Stephen Barber <smbarber@chromium.org>
This adds the virtio wayland device which is activated by default. The wayland
device needs the XDG_RUNTIME_DIR env variable to be set and a running wayland
compositor to connect to in that directory.
TEST=crosvm run <other args>
BUG=chromium:738638
Change-Id: Iaa417c6bb74739896042318451b4befcac0c1d0e
Reviewed-on: https://chromium-review.googlesource.com/559860
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
By using libc's openlog, we can ensure that the internal state of the
libc syslogger is consistent with the syslog module. Minijail will be
able to print to stderr and the syslog in the same way the logging
macros in crosvm do. The FD the syslog module uses is shared with libc
and via `syslog::get_fds`, jailed processes can inherit the needed FDs
to continue logging.
Now that `sys_log::init()` must be called in single threaded process,
this moves its tests to the list of the serially run ones in
build_test.py.
TEST=./build_test
BUG=None
Change-Id: I8dbc8ebf9d97ef670185259eceac5f6d3d6824ea
Reviewed-on: https://chromium-review.googlesource.com/649951
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Jason Clinton <jclinton@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
We will almost certainly require different seccomp policy files for
different architectures. Move all the existing secommp policy files
into a common directory grouped by architecture.
This will make it easier to install them via the ebuild later.
BUG=none
TEST=none
Change-Id: I0495789cd4143dc374ee6ebe083dc20ce724edbb
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/630058
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
