cli and docs: replace "id" by more correct "ID"

This commit is contained in:
Martin von Zweigbergk 2021-10-27 14:17:57 -07:00
parent 3587d4ec7e
commit 6687f98d8a
5 changed files with 15 additions and 15 deletions

View file

@ -17,7 +17,7 @@ pause 2
run_command "# Now make some changes in the working copy:"
run_command "echo \"Goodbye World!\" > README"
run_command "echo stuff > new-file"
run_command "# Our working copy commit id changed because we made changes:"
run_command "# Our working copy'\''s commit ID changed because we made changes:"
run_command "jj status"
pause 5
run_command "# Add a branch so we can easily refer to this commit:"

View file

@ -136,8 +136,8 @@ commit), but that's left out of the table to keep it simple. For example,
</tr>
<tr>
<td>Reorder changes from A-B-C-D to A-C-B-D</td>
<td><code>jj rebase -r C -d A; rebase -s B -d C</code> (pass change ids,
not commit ids, to not have to look up commit id of rewritten C)</td>
<td><code>jj rebase -r C -d A; rebase -s B -d C</code> (pass change IDs,
not commit IDs, to not have to look up commit ID of rewritten C)</td>
<td><code>git rebase -i A</code></td>
</tr>
<tr>
@ -202,7 +202,7 @@ commit), but that's left out of the table to keep it simple. For example,
</tr>
<tr>
<td>Undo an earlier operation</td>
<td><code>jj op undo -o &lt;operation id&gt;</code></td>
<td><code>jj op undo -o &lt;operation ID&gt;</code></td>
<td>Not supported</td>
</tr>
</tbody>

View file

@ -27,7 +27,7 @@ Working copy : 265ecf5cab2d
The working copy is clean
```
We can see from the output above that our working copy has a commit id
We can see from the output above that our working copy has a commit ID
(`265ecf5cab2d` in the example).
Let's check out a particular commit, so we get more predicable output:
@ -96,7 +96,7 @@ Jujutsu's diff format currently only has inline coloring of the diff (like
`git diff --color-words`), which makes the diff impossible to see in the
un-colorized output above (the "not" in "not ready" is red).
As you may have noticed, the working copy commit's id changed both when we
As you may have noticed, the working copy commit's ID changed both when we
edited the description and when we edited the README. However, the parent commit
stayed the same. Each change to the working copy commit amends the previous
version. So how do we tell Jujutsu that we are done amending the working copy
@ -117,7 +117,7 @@ Working copy : 192b456b024b
The working copy is clean
```
Note that a commit id printed in green indicates an open commit and blue
Note that a commit ID printed in green indicates an open commit and blue
indicates a closed commit.
If we later realize that we want to make further changes, we can make them
@ -145,7 +145,7 @@ o dcfc888f50b3 7eddf8dfc70d martinvonz@google.com 2021-05-23 22:07:40.000 -07:00
```
The `@` indicates the working copy commit. The first hash on a line is the
commit id. The second hash is a "change id", which is an id that follows the
commit ID. The second hash is a "change ID", which is an ID that follows the
commit as it's rewritten (similar to Gerrit's Change-Id). You can give either
hash to commands that take revisions as arguments. We will generally prefer
change ids because they stay the same when the commit is rewritten.

View file

@ -518,14 +518,14 @@ fn resolve_single_op_from_store(
}
if matches.is_empty() {
Err(CommandError::UserError(format!(
"No operation id matching \"{}\"",
"No operation ID matching \"{}\"",
op_str
)))
} else if matches.len() == 1 {
Ok(matches.pop().unwrap())
} else {
Err(CommandError::UserError(format!(
"Operation id prefix \"{}\" is ambiguous",
"Operation ID prefix \"{}\" is ambiguous",
op_str
)))
}
@ -1184,7 +1184,7 @@ By default, all branches are pushed. Use `--branch` if you want to push only one
)
.subcommand(
SubCommand::with_name("resolveprefix")
.about("Resolve a commit id prefix")
.about("Resolve a commit ID prefix")
.arg(Arg::with_name("prefix").index(1).required(true)),
);
let debug_command = SubCommand::with_name("debug")
@ -1272,7 +1272,7 @@ To get started, see the tutorial at https://github.com/martinvonz/jj/blob/main/d
ID> st` will show you what `jj st` would have shown you when the given \
operation had just finished.
Use `jj op log` to find the operation ID you want. Any unambiguous prefix of the operation id is \
Use `jj op log` to find the operation ID you want. Any unambiguous prefix of the operation ID is \
enough.
When loading the repo at an earlier operation, the working copy will not be automatically \
@ -3795,7 +3795,7 @@ When you use `--at-op`, the automatic snapshotting of the working copy will not
As a top-level option, `--at-op`, it can be passed to any command. However, you will typically \
only want to run read-only commands. For example, `jj log`, `jj st`, and `jj diff` \
all make sense. It's still possible to run e.g. `jj --at-op=<some operation id> \
all make sense. It's still possible to run e.g. `jj --at-op=<some operation ID> \
describe`. That's equivalent to having started `jj describe` back when the specified \
operation was the most recent operation and then let it run until now (which can be \
done for that particular command by not closing the editor). There's practically no \

View file

@ -172,7 +172,7 @@ fn parse_commit_id_method<'a>(method: Pair<Rule>) -> Property<'a, CommitId> {
let this_function = match name.as_str() {
"short" => Property::String(Box::new(CommitIdShortest)),
name => panic!("no such commit id method: {}", name),
name => panic!("no such commit ID method: {}", name),
};
let chain_method = inner.last().unwrap();
parse_method_chain(chain_method, this_function)
@ -193,7 +193,7 @@ fn parse_signature_method<'a>(method: Pair<Rule>) -> Property<'a, Signature> {
"name" => Property::String(Box::new(SignatureName)),
"email" => Property::String(Box::new(SignatureEmail)),
"timestamp" => Property::String(Box::new(SignatureTimestamp)),
name => panic!("no such commit id method: {}", name),
name => panic!("no such commit ID method: {}", name),
};
let chain_method = inner.last().unwrap();
parse_method_chain(chain_method, this_function)