When you use e.g. `git switch` to check out a conflicted commit,
you're going to end up with the `.jjconflicts-*` directories in your
working copy. It's probably not obvious what those mean. This patch
adds a README file to the root tree to try to explain to users what's
going on and how to recover.
The authoritative information about conflicts is stored in the
`jj:trees` commit header. The contents of conflicted commits is only
used for preventing GC. We can therefore add contents to the tree
without much consequence.
I will be updating `rebase -r` to avoid simplifying ancestor merges in a
subsequent commit, which will cause existing tests to fail for the Git
backend due to ancestor merges with the root commit.
I'm not sure if this was an intentional omission, but I think it would be
useful to have `-e` as a short flag for `--edit`. I don't usually edit commits,
but I do use `prev` and `next` with edit to navigate to a commit that I want to
squash. Often this is easier than typing `--from` and `--into` plus the change
IDs.
If people want to edit commits we shouldn't stand in their way.
This is following on the rewrite for `parallelize`.
- https://github.com/martinvonz/jj/pull/3521
Since rebase_descendants from rebase.rs is no longer used outside of that file,
it can be made private again.
In a future commit these tests will run with both `jj commit` and `jj new` since
both will have the same semantics for advancing the branch pointer.
Parameterizing the tests allows us to run both variants without duplicating the
test bodies. Since the commit IDs are different when `jj describe` + `jj new`
is used instead of `jj commit`, this commit also drops the commit IDs from the
test snapshots. This is fine because the commit IDs are not important for these
tests.
## Feature Description
If enabled in the user or repository settings, the local branches pointing to the
parents of the revision targeted by `jj commit` will be advanced to the newly
created commit. Support for `jj new` will be added in a future change.
This behavior can be enabled by default for all branches by setting
the following in the config.toml:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
```
Specific branches can also be disabled:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
disabled-branches = ["main"]
```
Branches that match a disabled pattern will not be advanced, even if they also
match an enabled pattern.
This implements feature request #2338.
Maybe it's personal preference, but the hash sign looks bigger compared to
the normal "o" nodes, and is slanted. This makes immutable commits stand out
too much. I think "+" is closer to the diamond character used in the unicode
template.
Since we have two separate "immutable" calls in the builtin node template, and
user might add a few more to their text template, it seems reasonable to cache
the containing_fn globally.
It's reasonable for a `WorkingCopy` implementation to want to return
an error. `LocalWorkingCopyFactory` doesn't because it loads all data
lazily. The VFS-based one at Google wants to be able to return an
error, however.
This one just tests with a larger value and a human-readable string (10KB).
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: If9e5d62146b369d3a1b7efe4e56a1b6b4338c720
For new users this results in a significantly better error output, that
actually shows them how to solve the problem, and why it happened.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ide0c86fdfb40d66f970ceaef7b60a71392d2cd4b
Previously, this command would work:
jj --config-toml='snapshot.max-new-file-size="1"' st
And is equivalent to this:
jj --config-toml='snapshot.max-new-file-size="1B"' st
But this would not work, despite looking like it should:
jj --config-toml='snapshot.max-new-file-size=1' st
This is extremely confusing for users.
This config value is deserialized via serde; and while the `HumanByteSize`
struct allegedly implemented Serde's `visit_u64` method, it was not called by
the deserialize visitor. Strangely, adding an `visit_i64` method *did* work, but
then requires handling of overflow, etc. This is likely because TOML integers
are naturally specified in `i64`.
Instead, just don't bother with any of that; implement a `TryFrom<String>`
instance for `HumanByteSize` that uses `u64::from_str` to try parsing the string
immediately; *then* fall back to `parse_human_byte_size` if that doesn't work.
This not only fixes the behavior but, IMO, is much simpler to reason about; we
get our `Deserialize` instance for free from the `TryFrom` instance.
Finally, this adjusts the test for `max-new-file-size` to now use a raw integer
literal, to ensure it doesn't regress. (There are already in-crate tests for
parsing the human readable strings.)
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I8dafa2358d039ad1c07e9a512c1d10fed5845738
This replaces `.map(|c| c.id().clone())` with `.ids().cloned()` to use nicer
syntax for getting `CommitId`s from an iterator of commits using the
`CommitIteratorExt` trait.
In one case we can actually call `.parent_ids()` directly. I also pluralized a
variable to make it clearer that it's a vec of IDs and not a single ID.
The rewritten code is already a no-op when there's a single input. I
don't think the case is common enough to warrant having a special case
for performance reasons either. Also, by not having the special case,
`jj parallelize <immutable commit>` fails consistently with the
non-singleton case.
I'm going to make some `jj parallelize` cases that currently error out
instead be successful. Some of the will result in ancestor merges with
the root commit. This patch updates those tests to avoid that.
`jj parallelize` was a good example of a command that can be
simplified by the new API, so I decided to rewrite it as an example.
The rewritten version is more flexible and doesn't actually need the
restrictions from the old version (such as checking that the commits
are connected). I still left the check for now to keep this patch
somewhat small. A subsequent commit will remove the restrictions.
`CommitRewriter` wraps 3 of the arguments, so I think it makes sense
to pass it instead. More importantly, I hope to continue refactoring
so many of the callers already have a `CommitRewriter`.
It was removed at 522025e091 "log: remove unused and inconsistent `log`
label", but obslog had the same inconsistency. Since it's now easy to label
the template output, let's re-add the "log" label.
The change in test_templater_upper_lower() is noop. Formatter no longer
emits reset sequence in the middle because the template is still labeled.
These labels could be renamed to "log_node"/"op_log_node" for consistency, but
I'm not sure if that's a good idea. A single "node" namespace is practically
more convenient.
It's not uncommon to label the whole template output with command or template
name. If the output doesn't have to be captured, we can simply push the label
to the formatter. cmd_config_list() is an example of such cases, but it's also
migrated for consistency.
Mercurial appears to resolve cwd-relative path first, so "glob:*.c" could be
parsed as "**/*.c" if cwd was literally "**". It wouldn't practically matter,
but isn't correct. Instead, jj's parser first splits glob into literal part
and pattern. That's mainly because we want to parse the user input texts into
type-safe objects, and (RepoPathBuf, glob::Pattern) pairs are the simplest
ones. The current parser can't handle patterns like "foo/*/.." (= "foo" ?),
and errors out. I believe this restriction is acceptable.
Unlike literal paths, the 'glob:' pattern anchors to the whole file path. I
don't think "prefix"-matching glob is useful, and making it the default would
be rather confusing.
It's cheap to look up commits again from the cache in `Store` but it
can be expensive to look up commits we didn't end up needing. This
will make it easier to refactor further and be able to cheaply set
preliminary parents for a rewritten commits and then let the caller
update them.
I'm going to add a helper struct to help with rewriting commits. I
want to make that struct own the old commit and the new parents to
simplify lifetimes. This patch prepares for that by passing the
commits by value to `rebase_commit()`.
Running `cargo publish` from a non-colocated repo (such as my usual
repo) is currently quite scary because it uploads all non-hidden
files, even if they're ignored by `.gitignore`
(https://github.com/rust-lang/cargo/issues/2063). I noticed this a
while ago and have always run the command from a fresh clone since
then. To avoid the need for that, let's use the workaround mentioned
on the bug, which is to explicitly list patterns we want to publish.
This fixes several issues that made working with empty files difficult using
the builtin diff editor.
1. The scm-record library used for the editor expects each file to have at
least one section. For new empty files this should be a file mode section. jj
wasn't rendering this mode section, which prevented empty files from being
selected at all.
2. The scm-record library returns `SelectedContents::Absent` if the file has no
contents after the diff editor is invoked. This can be because of several
reasons: 1) the file is new and empty; 2) the file was empty before and is
still empty; 3) the file has been deleted. Perhaps this is a bug in scm-record
and it should return `SelectedContents::Unchanged` or
`SelectedContents::Present` if the file hasn't been deleted. Until this is
patched upstream, we can work around it by disambiguating these cases.
See https://github.com/arxanas/scm-record/issues/26 for the upstream bug.
Fixes#3016
This is the last non-debug command that doesn't support file patterns. It
wouldn't make much sense to "cat" multiple files (despite the command name),
but doing that should be harmless.
Prepares for migrating to the matcher API. "Path exists but is not a file"
error is turned into a warning because the loop shouldn't terminate there.
"No such path" error message is also updated for consistency.
if `--use-destination-message/-u` is passed to `jj squash`, the resulting
revision will use the description of the destination revision and the
description(s) of the source revision(s) will be discarded.
If we ever implement some sort of ABI for dynamic extension loading, we'll need these underlying APIs to support multiple extensions, so we might as well do that first.
If this doesn't work out, maybe we can try one of these:
a. fall back to bare file name if expression doesn't contain any operator-like
characters (e.g. "f(x" is an error, but "f x" can be parsed as bare string)
b. introduce command-line flag to opt in (e.g. -e FILESET)
c. introduce pattern prefix to opt in (e.g. set:FILESET)
Closes#3239, #2915, #2286
This is the same as the `test_split_siblings_with_merge_child` added in
https://github.com/martinvonz/jj/pull/3485, but without the siblings flag. I
forgot to add the non-siblings version in that PR.
#3485
This command checks not only whether Watchman works, but also whether
it's enabled in the config. Also, the output is easier to understand
than that of the other `jj debug watchman` commands.
It would be nice if `jj debug watchman` called `jj debug watchman
status`, but it's not trivial in `clap` to have a default subcommand.
Ilya reported this in https://github.com/martinvonz/jj/issues/3483.
The bug was introduced in 976320726d.
Before this fix, `jj split` dropped any parents what weren't involved in the
split when it rebased the children of the commit being split. This meant that
any children which were merge commits lost their other parents unintentionally.
Fixes#3483
