Suppose a squash node in obslog is analogous to a merge in revisions log, it
makes sense to show diffs from auto-merge (or auto-squash) parents. This
basically means a non-partial squash node no longer shows diffs.
This also fixes missing diffs at the root predecessors if there were.
Currently, when there is a commit with two predecessors, the graph
splits into two branches, and all of the predecessors on the first
branch are printed before all of the predecessors on the second branch.
This causes the graph to grow wider with each squashed commit, since the
second branch must always get indented one level farther each time a
commit is squashed. I have some commits where the graph is indented more
than 10 levels due to squashing more than 10 times, making it very
difficult to read.
Reversing the order and printing the second branch before the first
branch prevents this unnecessary indentation and makes the graph easier
to read. This does not change the order of the edges in the graph (i.e.
the first predecessor is still the first edge and the second predecessor
is still the second edge in the graph).
Patience diff starts by lining up unique elements (e.g. lines) to find
matching segments of the inputs. After that, it refines the
non-matching segments by repeating the process. Histogram expands on
that by not just considering unique elements but by continuing with
elements of count 2, then 3, etc.
Before this commit, when diffing "a b a b b" against "a b a b a b", we
would match the two "a"s in the first input against the first two "a"s
in the second input. After this patch, we ignore the "a"s because
their counts differ, so we try to align the "b"s instead.
I have had this commit lying around since I wrote the histogram diff
implementation in 1e657c5331. I vaguely remember thinking that the
way I had implemented it (without this commit) was a bit weird, but I
wasn't sure if this commit would be an improvement or not. The bug
report from @chooglen today of a case where we behave differently from
Git is enough to make me think that we make this change after all.
#761
It's common to create empty working-copy commits while using jj, and
currently the author timestamp for a commit is only set when it is first
created. If you create an empty commit, then don't work on a repo for a
few days, and then start working on a new feature without abandoning the
working-copy commit, the author timestamp will remain as the time the
commit was created rather than being updated to the time that work began
or finished.
This commit changes the behavior so that discardable commits (empty
commits with no description) by the current user have their author
timestamps reset when they are rewritten, meaning that the author
timestamp will become finalized whenever a commit is given a description
or becomes non-empty.
This follows up on https://github.com/martinvonz/jj/pull/3459 and adds a
label to the closing delimeter of each conflict, e.g. "Conflict 1 of 3
ends".
I didn't initially put any label at the ending delimeter since the
starting delimeter is already marked with "Conflict 1 of 3". However,
I'm now realizing that when I resolve conflicts, I usually go from top
to bottom. The first thing I do is delete the starting conflict
delimeter. It is when I get to the *end* of the conflict that I wonder
whether there are any more conflicts left in the file.
For example,
```
<<<<<<< Conflict 1 of 3
+++++++ Contents of side #1
left 3.1
left 3.2
left 3.3
%%%%%%% Changes from base to side #2
-line 3
+right 3.1
>>>>>>>
```
or
```
<<<<<<< Conflict 1 of 1
%%%%%%% Changes from base to side #1
-line 3
+right 3.1
+++++++ Contents of side #2
left 3.1
left 3.2
left 3.3
>>>>>>>
```
Currently, there is no way to disable these, this is TODO for a future
PR. Other TODOs for future PRs: make these labels configurable. After
that, we could support a `diff3/git`-like conflict format as well, in
principle.
Counting conflicts helps with knowing whether you fixed all the
conflicts while you are in the editor.
While labeling "side #1", etc, does not tell you the commit id or
description as requested in #1176, I still think it's an improvement.
Most importantly, I hope this will make `jj`'s conflict format less
scary-looking for new users.
I've used this for a bit, and I like it. Without the labels, I would see
that the two conflicts have a different order of conflict markers, but I
wouldn't be able to remember what that means. For longer diffs, it can
be tricky for me to quickly tell that it's a diff as opposed to one of
the sides. This also creates some hope of being able to navigate a
conflict with more than 2 sides.
Another not-so-secret goal for this is explained in
https://github.com/martinvonz/jj/pull/3109#issuecomment-2014140627. The
idea is a little weird, but I *think* it could be helpful, and I'd like
to experiment with it.
When you use e.g. `git switch` to check out a conflicted commit,
you're going to end up with the `.jjconflicts-*` directories in your
working copy. It's probably not obvious what those mean. This patch
adds a README file to the root tree to try to explain to users what's
going on and how to recover.
The authoritative information about conflicts is stored in the
`jj:trees` commit header. The contents of conflicted commits is only
used for preventing GC. We can therefore add contents to the tree
without much consequence.
As discussed in #2900, the milliseconds are rarely useful, and it can
be confusing with different timezones because it makes harder to
compare timestamps.
I added an environment variable to control the timestamp in a
cross-platform way. I didn't document because it exists only for tests
(like `JJ_RANDOMNESS_SEED`).
Closes#2900
We haven't used custom Git commit headers for two main reasons:
1. I don't want commits created by jj to be different from any other
commits. I don't want Git projects to get annoyed by such commit
and reject them.
2. I've been concerned that tools don't know how to handle such
headers, perhaps even resulting in crashes.
The first argument doesn't apply to commits with conflicts because
such commits would never be accepted by a project whether or not they
use custom commit headers. The second argument is less relevant for
conflicted commits because most tools will be confused by such commits
anyway.
Storing conflict information in commit headers means that we can
transfer them via the regular Git wire protocol. We already include
the tree objects nested inside the root-level tree, so they will also
be transferred.
So, let's start by writing the information redundantly to the commit
header and to the existing storage. That way we can roll it back if we
realize there's a problem with using commit headers.
this greatly speeds up the time to run all tests, at the cost of slightly larger recompile times for individual tests.
this unfortunately adds the requirement that all tests are listed in `runner.rs` for the crate.
to avoid forgetting, i've added a new test that ensures the directory is in sync with the file.
## benchmarks
before this change, recompiling all tests took 32-50 seconds and running a single test took 3.5 seconds:
```
; hyperfine 'touch lib/src/lib.rs && cargo t --test test_working_copy'
Time (mean ± σ): 3.543 s ± 0.168 s [User: 2.597 s, System: 1.262 s]
Range (min … max): 3.400 s … 3.847 s 10 runs
```
after this change, recompiling all tests take 4 seconds:
```
; hyperfine 'touch lib/src/lib.rs ; cargo t --test runner --no-run'
Time (mean ± σ): 4.055 s ± 0.123 s [User: 3.591 s, System: 1.593 s]
Range (min … max): 3.804 s … 4.159 s 10 runs
```
and running a single test takes about the same:
```
; hyperfine 'touch lib/src/lib.rs && cargo t --test runner -- test_working_copy'
Time (mean ± σ): 4.129 s ± 0.120 s [User: 3.636 s, System: 1.593 s]
Range (min … max): 3.933 s … 4.346 s 10 runs
```
about 1.4 seconds of that is the time for the runner, of which .4 is the time for the linker. so
there may be room for further improving the times.
I have used the tree-level conflict format for several weeks without
problem (after the fix in 51b5d168ae). Now - right after the 0.10.0
release - seems like a good time to enable the config by default.
I enabled the config in our default configs in the CLI crate to reduce
impact on tests (compared to changing the default in `settings.rs`).
This switches the whole `diff_util` module to working with
`MergedTree`, `Merge<Option<TreeValue>>` etc., so it can support
tree-level conflicts.
Since we want to avoid using `ConflictId`s, I switched the hash we use
for conflicts in `--git` style diffs to use an all-'0' id instead of
using the conflict id.
