While I like strict parsing, it's not uncommon that we have to deal with file
names containing spaces, and doubly-quoted strings such as '"Foo Bar"' look
ugly. So, this patch adds an exception that accepts top-level bare strings.
This parsing rule is specific to command arguments, and won't be enabled when
loading fileset aliases.
When you use e.g. `git switch` to check out a conflicted commit,
you're going to end up with the `.jjconflicts-*` directories in your
working copy. It's probably not obvious what those mean. This patch
adds a README file to the root tree to try to explain to users what's
going on and how to recover.
The authoritative information about conflicts is stored in the
`jj:trees` commit header. The contents of conflicted commits is only
used for preventing GC. We can therefore add contents to the tree
without much consequence.
I will be updating `rebase -r` to avoid simplifying ancestor merges in a
subsequent commit, which will cause existing tests to fail for the Git
backend due to ancestor merges with the root commit.
This addresses the test instability. The underlying problem still exists, but
it's unlikely to trigger user-facing issues because of that. A repo instance
won't be reused after gc() call.
Fixes#3537
Apparently, these gc() invocations rely on that the previous "git gc" packed
all refs so there are no loose refs to compare mtimes. If there were new (or
remaining) loose refs, mtime comparison could fail. I also added +1sec to
effectively turn off the keep_newer option, which isn't important in these
tests.
CommitIds are often manipulated by reference, so this makes the API more
flexible for cases where the caller doesn't already have a Vec or array of
owned CommitIds.
In many cases `rewrite_parents()` does not even need to clone the input
CommitIds. This refactor allows the clone to be avoided if it's unnecessary.
There might be other APIs that would benefit from a similar change. In general,
it seems like there are a lot of places where we're writing
`&[commit_x.id().clone, commit_y.id().clone()]` and similiar.
- [Rust API Guidelines](https://rust-lang.github.io/api-guidelines/flexibility.html#functions-minimize-assumptions-about-parameters-by-using-generics-c-generic)
I'm not sure if this was an intentional omission, but I think it would be
useful to have `-e` as a short flag for `--edit`. I don't usually edit commits,
but I do use `prev` and `next` with edit to navigate to a commit that I want to
squash. Often this is easier than typing `--from` and `--into` plus the change
IDs.
If people want to edit commits we shouldn't stand in their way.
This is following on the rewrite for `parallelize`.
- https://github.com/martinvonz/jj/pull/3521
Since rebase_descendants from rebase.rs is no longer used outside of that file,
it can be made private again.
In a future commit these tests will run with both `jj commit` and `jj new` since
both will have the same semantics for advancing the branch pointer.
Parameterizing the tests allows us to run both variants without duplicating the
test bodies. Since the commit IDs are different when `jj describe` + `jj new`
is used instead of `jj commit`, this commit also drops the commit IDs from the
test snapshots. This is fine because the commit IDs are not important for these
tests.
## Feature Description
If enabled in the user or repository settings, the local branches pointing to the
parents of the revision targeted by `jj commit` will be advanced to the newly
created commit. Support for `jj new` will be added in a future change.
This behavior can be enabled by default for all branches by setting
the following in the config.toml:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
```
Specific branches can also be disabled:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
disabled-branches = ["main"]
```
Branches that match a disabled pattern will not be advanced, even if they also
match an enabled pattern.
This implements feature request #2338.
Maybe it's personal preference, but the hash sign looks bigger compared to
the normal "o" nodes, and is slanted. This makes immutable commits stand out
too much. I think "+" is closer to the diamond character used in the unicode
template.
Since we have two separate "immutable" calls in the builtin node template, and
user might add a few more to their text template, it seems reasonable to cache
the containing_fn globally.
It's reasonable for a `WorkingCopy` implementation to want to return
an error. `LocalWorkingCopyFactory` doesn't because it loads all data
lazily. The VFS-based one at Google wants to be able to return an
error, however.
This one just tests with a larger value and a human-readable string (10KB).
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: If9e5d62146b369d3a1b7efe4e56a1b6b4338c720
For new users this results in a significantly better error output, that
actually shows them how to solve the problem, and why it happened.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ide0c86fdfb40d66f970ceaef7b60a71392d2cd4b
Previously, this command would work:
jj --config-toml='snapshot.max-new-file-size="1"' st
And is equivalent to this:
jj --config-toml='snapshot.max-new-file-size="1B"' st
But this would not work, despite looking like it should:
jj --config-toml='snapshot.max-new-file-size=1' st
This is extremely confusing for users.
This config value is deserialized via serde; and while the `HumanByteSize`
struct allegedly implemented Serde's `visit_u64` method, it was not called by
the deserialize visitor. Strangely, adding an `visit_i64` method *did* work, but
then requires handling of overflow, etc. This is likely because TOML integers
are naturally specified in `i64`.
Instead, just don't bother with any of that; implement a `TryFrom<String>`
instance for `HumanByteSize` that uses `u64::from_str` to try parsing the string
immediately; *then* fall back to `parse_human_byte_size` if that doesn't work.
This not only fixes the behavior but, IMO, is much simpler to reason about; we
get our `Deserialize` instance for free from the `TryFrom` instance.
Finally, this adjusts the test for `max-new-file-size` to now use a raw integer
literal, to ensure it doesn't regress. (There are already in-crate tests for
parsing the human readable strings.)
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I8dafa2358d039ad1c07e9a512c1d10fed5845738
This replaces `.map(|c| c.id().clone())` with `.ids().cloned()` to use nicer
syntax for getting `CommitId`s from an iterator of commits using the
`CommitIteratorExt` trait.
In one case we can actually call `.parent_ids()` directly. I also pluralized a
variable to make it clearer that it's a vec of IDs and not a single ID.
The rewritten code is already a no-op when there's a single input. I
don't think the case is common enough to warrant having a special case
for performance reasons either. Also, by not having the special case,
`jj parallelize <immutable commit>` fails consistently with the
non-singleton case.
I'm going to make some `jj parallelize` cases that currently error out
instead be successful. Some of the will result in ancestor merges with
the root commit. This patch updates those tests to avoid that.
`jj parallelize` was a good example of a command that can be
simplified by the new API, so I decided to rewrite it as an example.
The rewritten version is more flexible and doesn't actually need the
restrictions from the old version (such as checking that the commits
are connected). I still left the check for now to keep this patch
somewhat small. A subsequent commit will remove the restrictions.
There are several existing commands that would benefit from an API
that makes it easier to rewrite a whole graph of commits while
transforming them in some way.
`jj squash` is one example. When squashing into an ancestor, that
command currently rewrites the ancestor, then rebases descendants, and
then rewrites the rewritten source commit. It would be better to
rewrite the source commit (and any descendants) only once.
Another example is the future `jj fix`. That command will want to
rewrite a graph while updating the trees. There's currently no good
API for that; you have to manually iterate over descendants and
rewrite them.
This patch adds a new `MutableRepo::transform_descendants()` method
that takes a callback which gets a `CommitRewriter` passed to it. The
callback can then decide to change the parents, the tree, etc. The
callback is also free to leave the commit in place or to abandon it.
I updated the regular `rebase_descendants()` to use the new function
in order to exercise it. I hope we can replace all of the
`rebase_descendant_*()` flavors later.
I added a `replace_parent()` method that was a bit useful for the test
case. It could easily be hard-coded in the test case instead, but I
think the method will be useful for `jj git sync` and similar in the
future.
`CommitRewriter` wraps 3 of the arguments, so I think it makes sense
to pass it instead. More importantly, I hope to continue refactoring
so many of the callers already have a `CommitRewriter`.
The new `rebase()` method is meant to be called after deciding on the
new parents (typically by leaving them unchanged). It returns a
`CommitBuilder` for setting any additional values.
There will probably be a `reparent()` method in the future.
