previously, `jj diff` would show the full contents of binary files such as images.
after this change, it instead shows "(binary)". it still shows the filename and metadata so that
users can open the file in the viewer of their choce.
future work could involve showing binary files as Sixel or similar; finding a way to compare large
non-binary files without filling up the screen; or extending the data backends to avoid having to
read the whole file contents into memory.
Previously, `jj git push; jj git push` would tell the user that "No
branches point to the specified revisions.". I found this confusing,
even though strictly speaking it is correct (as the default revset only
considers revisions that haven't been pushed to the remote).
Closes#2241
The error output gets more verbose because all gix error sources are printed.
Maybe we'll need a better formatting, but changing to multi-line output doesn't
look nice either.
These error types are special because the message is embedded in ASCII art. I
think it would be a source of bugs if some error types had ": {source}" but
others don't. So I'm going to remove all ": {source}"s, and let the callers
concatenate them when needed.
Summary: As discussed in Discord, on GitHub, and elsewhere, this change
deprecates the use of `jj merge` and suggests users use `jj new` exclusively
instead. `merge` isn't completely unfit as a name; but we think it obscures
the generality of `new` and we want people to use it instead.
To further drive the bit home, by default, `jj merge` is now hidden. This will
hopefully stop new users from running into it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I94938aca9d3e2aa12d1394a5fbc58acce3185b56
Summary: As discussed in Discord, on GitHub, and elsewhere, this change
deprecates the use of `jj checkout` and suggests users use `jj new` exclusively
instead. The verb `checkout` is a relic of a bygone era the — days of RCS
file locking, before 3-way merge — and is not a good, fitting name for the
functionality it provides.
To further drive the bit home, by default, `jj checkout` (and `jj co`) is now
hidden. This will hopefully stop new users from running into it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I7a1adfc9168fce1f25cf5d4c4c313304769e41a1
These didn't really need to use `jj checkout`, and it will be deprecated in a
future change anyway. Move them out of there and into `new`.
Ideally this would go into `test_conflicts.rs`, but that exists in `jj-lib`, so
it doesn't have `TestEnvironment` available to it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: If0173b27ab4d1f6036a4ec632ec77b6824f310c3
* Move git_init() to cli/src/commands/git.rs and call it from there.
* Move print_trackable_remote_branches into cli_util since it's not git specific,
but would apply to any backend that supports remote branches.
* A no-op change. A follow up PR will make use of this.
* Create a git_init() function in cli/src/commands/init.rs where all git related work is done.
This function will be moved to cli/src/commands/git.rs in a subsequent PR.
I'm going to rewrite the error output to print source chain one by one.
The "{message}: {err}" pattern is wrapped in an error struct. InternalError
variant could be a { message, source } pair, but not all errors need an
additional message. This will also apply to UserError.
This prevents rust doctests from trying to compile the code blocks.
I don't think we use doctests much or at all, but I'd like
`cargo insta test --test-runner nextest --accept --workspace`
to pass.
Unfortunately, this affects the output of `jj help` as well, but I
can't think of a workaround for that.
I am using a very hacky approach, using `insta` to generate the markdown help.
This is based on a lucky coincidence that `insta` chose to use a header
format for snapshot files that MkDocs interprets as a Markdown header (and
ignores).
I considered several other approaches, but I couldn't resist the facts that:
- This doesn't require new developers to install any extra tools or run any
extra commands.
- There is no need for a new CI check.
- There is no need to compile `jj` in the "Make HTML docs" GitHub action,
which is currently very fast and cheap.
Downside: I'm not sure how well MkDocs will work on Windows, unless the
developer explicitly enables symbolic links (which IIUC is not trivial).
### Possible alternatives
My next favorite approaches (which we could switch to later) would be:
#### `xtask`
Set up a CI check and a [Cargo `xtask`] so that `cargo xtask cli-help-to-md`
essentially runs `cargo run -- util markdown-help > docs/cli-reference.md` from
the project root.
Every developer would have to know to run `cargo xtask cli-help-to-md` if
they change the help text.
Eventually, we could have `cargo xtask preflight` that runs `cargo +nightly
fmt; cargo xtask cli-help-to-md; cargo nextest run`, or `cargo insta`.
#### Only generate markdown for CLI help when building the website, don't track it in Git.
I think that having the file in the repo will be nice to preview changes to
docs, and it'll allow people to consult the file on GitHub or in their repo.
The (currently) very fast job of building the website would now require
installing Rust and building `jj`.
#### Same as the `xtask`, but use a shell script instead of an `xtask`
An `xtask` might seem like overkill, since it's Rust instead of a shell script.
However, I don't want this to be a shell script so that new contributors on
Windows can still easily run it ( since this will be necessary for the CI to
pass) without us having to support a batch file.
#### Cargo Alias
My first attempt was to set up a [cargo alias] to run this, but that doesn't
support redirection (so I had to change the `jj util` command to output to a
file) and, worse, is incapable of executing the command *in the project root*
regardless of where in the project the current directory is. Again, this seems
to be too inconvenient for a command that every new PR author would have to run
to pass CI.
Overall, this just seems a bit ugly. I did file
https://github.com/rust-lang/cargo/issues/13348, I'm not really sure that was
worthwhile, though.
**Aside:** For reference, the alias was:
```toml
# .cargo/config.toml
alias.gen-cli-reference = "run -p jj-cli -- util markdown-help docs/cli-reference.md"
```
### Non-alternatives
#### Clap's new feature
`clap` recently obtained a similarly-sounding feature in
https://github.com/clap-rs/clap/pull/5206. However, it only prints short help
for subcommands and can't be triggered by an option AFAICT, so it won't help us
too much.
[Cargo `xtask`]: https://github.com/matklad/cargo-xtask
[cargo alias]: https://doc.rust-lang.org/cargo/reference/config.html#alias
This uses the [`clap-markdown`] library. It's not very flexible, but seems to
work. Its implementation is not difficult. If needed, we could later
reimplement the part that iterates over all subcommands and have a different
output (e.g., the boring version of each help text inside its own code block,
or a different file per subcommand, or some fancy template in handlebars or
another rust-supported templating language). I don't want to do it right now,
though.
The library does turn out to have some annoying bugs, e.g.
https://github.com/ConnorGray/clap-markdown/pull/18, but I think that's not a
deal-braker. The fix seems to be 3 lines; if the fix doesn't get merged soon, we
could vendor the library maybe?
[`clap-markdown`]: https://docs.rs/clap-markdown/latest/clap_markdown/
GitBackend::gc() will need to check if a commit is reachable from any
historical operations. This could be calculated from the view and commit
objects, but the Index will do a better job.
The "::HEAD" set is usually smaller than "::git_refs". If these sets were
imported in that order, "HEAD..git_refs" commits would be indexed on top of
the "::HEAD" commits. It's not a problem, but undesirable.
I'm going to make WorkspaceCommandHelper::maybe_snapshot() snapshot the working
copy before importing refs. git::import_some_refs() can rebase the working copy
branch and therefore @ can be moved. git::import_head() doesn't, and it should
be invoked before snapshotting.
git::import_head() is inserted to some of the git:import_refs() callers where
HEAD seems to matter. I feel it's a bit odd that the HEAD ref is imported to
non-colocated repo, but "jj init --git-repo" relies on that, and I think the
existence of HEAD@git is harmless. It's merely a ref to the revision checked
out somewhere else.
This is a convenient command, for scripting things like `cd $(jj root)
&& do something`, and it seems better to allow people to find it
before they learn about workspaces.
This goes with `c`, `s`, `f`. I feel like it's a relatively
common command now that `auto-local-branch` defaults to
`false`.
I didn't add `u` for `untrack` because it seems a little
ambiguous (un-what?); there may be other `branch` commands that undo
something in the future.
The count() function in this trait is used by "jj branch" to determine
(and then report) how many commits a certain branch is ahead/behind
another branch. This is currently implemented by walking all commits
in the revset, counting how many were encountered. But this could be
improved: if the number is large, it is probably sufficient to report
"at least N" (instead of walking all the way), and this does not scale
well to jj backends that may not have all commits present locally (which
may prefer to return an estimate, rather than access the network).
Therefore, add a function that is explicitly documented to be O(1)
and that can return a range of values if the backend so chooses.
Also remove count(), as it is not immediately obvious that it is an
expensive call, and callers that are willing to pay the cost can obtain
the exact same functionality through iter().count() anyway. (In this
commit, all users of count() are migrated to iter().count() to preserve
all existing functionality; they will be migrated to count_estimate() in
a subsequent commit.)
"branch" needed to be updated due to this change. Although jj
is currently only available in English, I have attempted to keep
user-visible text from being assembled piece by piece, so that if we
later decide to translate jj into other languages, things will be easier
for translators.
A subsequent commit will teach more variants of ahead/behind messages,
so refactor the existing code to avoid code duplication and a future
combinatorial explosion.
