I'm not sure if this was an intentional omission, but I think it would be
useful to have `-e` as a short flag for `--edit`. I don't usually edit commits,
but I do use `prev` and `next` with edit to navigate to a commit that I want to
squash. Often this is easier than typing `--from` and `--into` plus the change
IDs.
If people want to edit commits we shouldn't stand in their way.
This is following on the rewrite for `parallelize`.
- https://github.com/martinvonz/jj/pull/3521
Since rebase_descendants from rebase.rs is no longer used outside of that file,
it can be made private again.
In a future commit these tests will run with both `jj commit` and `jj new` since
both will have the same semantics for advancing the branch pointer.
Parameterizing the tests allows us to run both variants without duplicating the
test bodies. Since the commit IDs are different when `jj describe` + `jj new`
is used instead of `jj commit`, this commit also drops the commit IDs from the
test snapshots. This is fine because the commit IDs are not important for these
tests.
## Feature Description
If enabled in the user or repository settings, the local branches pointing to the
parents of the revision targeted by `jj commit` will be advanced to the newly
created commit. Support for `jj new` will be added in a future change.
This behavior can be enabled by default for all branches by setting
the following in the config.toml:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
```
Specific branches can also be disabled:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
disabled-branches = ["main"]
```
Branches that match a disabled pattern will not be advanced, even if they also
match an enabled pattern.
This implements feature request #2338.
This one just tests with a larger value and a human-readable string (10KB).
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: If9e5d62146b369d3a1b7efe4e56a1b6b4338c720
For new users this results in a significantly better error output, that
actually shows them how to solve the problem, and why it happened.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ide0c86fdfb40d66f970ceaef7b60a71392d2cd4b
Previously, this command would work:
jj --config-toml='snapshot.max-new-file-size="1"' st
And is equivalent to this:
jj --config-toml='snapshot.max-new-file-size="1B"' st
But this would not work, despite looking like it should:
jj --config-toml='snapshot.max-new-file-size=1' st
This is extremely confusing for users.
This config value is deserialized via serde; and while the `HumanByteSize`
struct allegedly implemented Serde's `visit_u64` method, it was not called by
the deserialize visitor. Strangely, adding an `visit_i64` method *did* work, but
then requires handling of overflow, etc. This is likely because TOML integers
are naturally specified in `i64`.
Instead, just don't bother with any of that; implement a `TryFrom<String>`
instance for `HumanByteSize` that uses `u64::from_str` to try parsing the string
immediately; *then* fall back to `parse_human_byte_size` if that doesn't work.
This not only fixes the behavior but, IMO, is much simpler to reason about; we
get our `Deserialize` instance for free from the `TryFrom` instance.
Finally, this adjusts the test for `max-new-file-size` to now use a raw integer
literal, to ensure it doesn't regress. (There are already in-crate tests for
parsing the human readable strings.)
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I8dafa2358d039ad1c07e9a512c1d10fed5845738
I'm going to make some `jj parallelize` cases that currently error out
instead be successful. Some of the will result in ancestor merges with
the root commit. This patch updates those tests to avoid that.
`jj parallelize` was a good example of a command that can be
simplified by the new API, so I decided to rewrite it as an example.
The rewritten version is more flexible and doesn't actually need the
restrictions from the old version (such as checking that the commits
are connected). I still left the check for now to keep this patch
somewhat small. A subsequent commit will remove the restrictions.
It was removed at 522025e091 "log: remove unused and inconsistent `log`
label", but obslog had the same inconsistency. Since it's now easy to label
the template output, let's re-add the "log" label.
The change in test_templater_upper_lower() is noop. Formatter no longer
emits reset sequence in the middle because the template is still labeled.
Mercurial appears to resolve cwd-relative path first, so "glob:*.c" could be
parsed as "**/*.c" if cwd was literally "**". It wouldn't practically matter,
but isn't correct. Instead, jj's parser first splits glob into literal part
and pattern. That's mainly because we want to parse the user input texts into
type-safe objects, and (RepoPathBuf, glob::Pattern) pairs are the simplest
ones. The current parser can't handle patterns like "foo/*/.." (= "foo" ?),
and errors out. I believe this restriction is acceptable.
Unlike literal paths, the 'glob:' pattern anchors to the whole file path. I
don't think "prefix"-matching glob is useful, and making it the default would
be rather confusing.
This is the last non-debug command that doesn't support file patterns. It
wouldn't make much sense to "cat" multiple files (despite the command name),
but doing that should be harmless.
Prepares for migrating to the matcher API. "Path exists but is not a file"
error is turned into a warning because the loop shouldn't terminate there.
"No such path" error message is also updated for consistency.
if `--use-destination-message/-u` is passed to `jj squash`, the resulting
revision will use the description of the destination revision and the
description(s) of the source revision(s) will be discarded.
If this doesn't work out, maybe we can try one of these:
a. fall back to bare file name if expression doesn't contain any operator-like
characters (e.g. "f(x" is an error, but "f x" can be parsed as bare string)
b. introduce command-line flag to opt in (e.g. -e FILESET)
c. introduce pattern prefix to opt in (e.g. set:FILESET)
Closes#3239, #2915, #2286
This is the same as the `test_split_siblings_with_merge_child` added in
https://github.com/martinvonz/jj/pull/3485, but without the siblings flag. I
forgot to add the non-siblings version in that PR.
#3485
Ilya reported this in https://github.com/martinvonz/jj/issues/3483.
The bug was introduced in 976320726d.
Before this fix, `jj split` dropped any parents what weren't involved in the
split when it rebased the children of the commit being split. This meant that
any children which were merge commits lost their other parents unintentionally.
Fixes#3483
Maybe we can optimize it to check paths during diffing, but I think it's okay
to add extra lookup cost at the end. The size of the path arguments is usually
small.
Closes#505
Path parsing will be migrated to parse_union_filesets(), but I haven't decided
how we'll go forward:
a. migrate everything to fileset
b. require flag like "-e FILESET" (note -p conflicts with log -p)
c. require flag like "-e FILESET" and deprecate positional PATHs #2554
d. require prefix like "set:FILESET" (not consistent with -r REVSET)
I'm currently dogfooding (a). It works for me, but I don't use exotic file
names that would require quoting in zsh.
#3239
Before this commit `jj prev` fails if the current working copy commit is a
merge commit. After this commit it will prompt the user to choose the ancestor
they want to select.
#2126
This commit adds commit graphs to most of the tests for `jj prev` to make it
clearer where `@` points before and after `prev` is run.
In addition, there were a couple of tests where the comments suggested the test
meant to have `@` pointing to a specific commit, but it actually pointed to an
empty child of that commit.
This sort of issue also exists in `test_prev_editing`. The test is supposed to
check that `--edit` is implied if you run `jj prev` on an interior commit, but
it actually caused a new empty commit to be created since `@` was sitting on a
tip commit.
This will hopefully make it clear that `jj prev` does not
move by [OFFSET] relative to `@`, which is a misconception
that I had and I think others may also have.
I am suggesting this change as a result of the vigorous discussion in
these two issues:
- https://github.com/martinvonz/jj/issues/3426
- https://github.com/martinvonz/jj/pull/3445
We should make similar changes to `jj next` as well since
it follows similar rules.
This is basically the same as string kind:pattern syntax in CLI. This will
hopefully be superseded by filesets, but I'm not sure if that will work out.
A file name is more likely to contain whitespaces, which will have to be
quoted as '"Documents and Settings"'.
There are no more callers of parse_function_argument_to_string(), so it's
removed. This function was a thin wrapper of literal parser, and can be
easily reintroduced if needed.
Parallelize revisions by making them siblings
Running `jj parallelize 1::2` will transform the history like this:
```text
3
| 3
2 / \
| -> 1 2
1 \ /
| 0
0
```
Each of the target revisions is rebased onto the parents of the root(s) of
the target revset (not to be confused with the repo root). The children of
the head(s) of the target revset are rebased onto the target revisions.
The target revset is the union of the REVISIONS arguments.
The target revset being parallelized must satisfy several conditions,
otherwise the command will fail.
1. The heads of the target revset must not have different children.
2. The roots of the target revset must not have different parents.
3. The parents of all target revisions except the roots must also be
parallelized. This means that the target revisions must be connected.
This lets users use "large" revsets in commands such as `jj rebase`, without
needing the `all:` modifier.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ica80927324f3d634413d3cc79fbc73057ccefd8a
Offset is a more descriptive noun for this argument. This commit also tweaks
the help message for the argument.
This isn't an option/flag, so this change should be transparent to users.
Like -r/--revisions, it should be okay to filter synced/non-tracking remote
branches by name.
conflicts_with_all = "tracked" is redundant, so removed as well. The tracked
field declares that it conflicts with --all-remotes.
Since "all:" implies that the user doesn't care about the order of the
revisions within that argument, it should be okay if two "all:" sets overlapped.
When a commit is split, any branches pointing to it are moved to the second
commit created by the split. This is true even if the --siblings option is
used.
#3419
If the --siblings option is used, the target commit is split into two sibling
commits instead of parent and child commits. Any children of the original
commit will have both siblings as their new parents.
#2274
Note that `jj resolve` already had its own `--quiet` flag. The output
with `--quiet` for that command got a lot quieter with the global
`--quiet` also taking effect. That seems reasonable to me.
Templater doesn't have the one yet, but I think it belongs to the same
category.
For clap::Error, we could use clap's own mechanism to render suggestions as
"tip: ...", but I feel "Hint: ..." looks better because our error/hint message
is capitalized.
One less CLI revset helper. It might look odd that "jj rebase" says "Merge
failed" whereas "jj new" doesn't, but that depends on where the BackendError
is detected.
Commands like `new`, `duplicate`, and `abandon` can take multiple revset
arguments which results in their collective union. They take the revisions
directly as arguments. But for consistency with many other commands, they can
also take the `-r` argument, which is a no-op. However, due to the flag being
specified as a `bool`, the `-r` option can only be specified once, so e.g.
`abandon -r x -r y` often fails. I normally use `-r` for consistency and muscle
memory, so this bites me often.
Instead, use `clap::ArgAction::Count` in order to allow `-r` to be specified
multiple times. It remains unused, of course.
With this change, all the following invocations are equivalent. Before this
change, the second example would fail due to giving `-r` multiple times.
jj abandon x y
jj abandon -r x -r y
jj abandon -r 'x | y'
Note: `jj new` already supported this exact case actually, but it used an
awkward trick where it used `.overrides_with()` in order to override *itself* so
it could be specified multiple times. I believe this is a bit clearer.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ib36cf81d46dae4f698f06d0a32e8fd3120bfb4a4
This makes the summary line more informative. Even though it just duplicates
the message printed later, I think it's easier to follow.
This patch also adjusts some RevsetParseError messages because it seemed
redundant to repeat "revset function", "argument", etc.
Because the CLI error handler now prints error sources in multi-line format,
it doesn't make much sense to render Revset/TemplateParseError differently.
This patch also fixes the source() of the SyntaxError kind. It should be
self.pest_error.source() (= None), not self.pest_error.
Highlighting "{n}: " will help to follow error sources containing multi-line
messages. I'm going to make revset/template alias errors be formatted as plain
error chain.
It's inconsistent that some warnings have headings and some don't, and it seems
the choice is arbitrary. Let's unify the style. There are two exceptions:
1. continued line following labeled message,
2. "unrecognized response" followed by prompt.
The lowercase "warning: " is unified to "Warning: " as it is the jj's
convention afaik.
The _default() suffix could be dropped from these methods, but it's probably
better to break the existing codebase for the moment. Otherwise, the caller
might do writeln!(ui.warning(), "Warning: ..").
The existing .hint() method is renamed to .hint_no_heading() to clarify that
it's not the default choice to print a hint. I'll add .hint_default() later,
which will be the shorthand for .hint_with_heading("Hint: ").
This fixes --change/--branch conflicts by making --change precede --branch. I
don't think this is the most obvious behavior, but it's the easiest workaround.
It could be moved before set_local_branch_target() to not update the local
branch, but it seemed weird that --change is silently ignored. This
inconsistency will be addressed later.
I'm going to reorganize CommandError as (kind, err, hints) tuple so that we
can add_hint() to the constructed error object.
Some config error messages are slightly adjusted because the inner error is
now printed in separate line.
As requested in #1471, I added a new flag for `jj branch list` to only show branches that are conflicted.
Adds a unit test to check for listing only conflicted branches and regenerates the cli output to incorporate the new flag.
Closes#1471
reformat
Apart from (IMO) looking nicer, this will also sidestep the potential problem
that if the file contains actual jj conflict markers (`>>>>>>>` in the beginning
of a line, for example), jj would currently have trouble materializing and
subsequently parsing conflicts in the file if it actually became conflicted.
I'll demo this bug in either this or a subsequent PR. It's the kind of bug that
sounds serious in theory but might never cause a problem in practice.
After this PR, only `docs/tutorial.md` has a conflict marker that's not indented.
There's only one there, so hopefully it won't be too much of a pain to deal with.
I also indented other strings in `test_conflicts.rs`. IMO, this looks nice and
more consistent with the `insta::assert_snapshot` output. I didn't spend the
time to do the same for `test_resolve_command`.
As discussed in #2900, the milliseconds are rarely useful, and it can
be confusing with different timezones because it makes harder to
compare timestamps.
I added an environment variable to control the timestamp in a
cross-platform way. I didn't document because it exists only for tests
(like `JJ_RANDOMNESS_SEED`).
Closes#2900
"-r REVISIONS" here specifies the search space of the branches to push, and
warned if no branches are found in that space. I don't think an empty set
should be an error, but a warning for consistency. The warning message will be
improved by the subsequent patches.
This command belongs to the same category as "duplicate".
We might want a plural version of resolve_revset(), but I'm not sure whether
it should return Vec<Commit> or Revset. Let's revisit it later when we get
more callers.
There's a subtle behavior change that an empty revset is no longer rejected
individually, but I think that's good for "jj duplicate".
cmd_duplicate() was the last caller of index.topo_order().
When an operation is missing and we recover the workspace, we create a
new working-copy commit on top of the desired working-copy commit (per
the available head operation). We then reset the working copy to an
empty tree because it shouldn't really matter much which commit we
reset to. However, when the workspace is sparse, it does matter, as
the test case from the previous patch shows. This patch fixes it by
replacing the `reset_to_empty()` method by a new `recover(&Commit)`,
which effectively resets to the empty tree and then resets to the
commit. That way, any subsequent snapshotting will result keep the
paths from that tree for paths outside the sparse patterns.
As shown by the updated test case, when we recover from a working copy
pointing to a lost operation, the new working-copy commit after
snapshotting will have lost any files outside the sparse patterns.
The original plan was to extend the globals table to implement "revset(expr)".
I'm not sure if that's more discoverable than "self.contained_in(revset_expr)"
method, but we can decide that later. Anyways, this patch adds typo suggestion
for global functions.
This change updates the language of `jj edit`'s help message to be
more clear as to the nature of the command. It also adds a
recommendation for a more idiomatic/safer workflow.
I just wanted to remove CommandError from parse_immutable_expression(), which
will be called from the templater, but the new error message looks also better.
Now you can do e.g. `jj squash --from 'foo+::' --into foo` to squash a
whole series into one commit. It doesn't need to be linear; you can
squash a bunch of siblings into another siblings, for example.
This was proposed by @Brixy in
https://github.com/martinvonz/jj/discussions/2882 a while ago. There
seems to be pretty strong consensus that it's a good idea.
I've copied the added test cases from `test_move_command.rs`, just
replacing `move` by `squash`, `--to` by `--into`, and deleting the
test of a no-arg invocation (`jj move` fails, `jj squash` does not -
it defaults to squashing into the parent).
This patch makes `jj squash` us the helper I just extracted from `jj
move`. I had a to add a few small features to it for that.
The `test_squash_command.rs` test changed in a few cases where we do a
partial squash. After this patch, we include the rebased child in the
count of rebased descendants. That seems reasonable and consistent
with partial squash/move further than 1 generation.
This is just a little step towards reusing the helper I just extracted
from `jj move`. I had to update `test_immutable_commits.rs` because it
would otherwise fail because of the merge rather than failing because
of the immutable commit.
I'm soon going to make `jj squash` accept either `-r` or
`--from/--to`, which means `-r` will then be optional. This patch
prepares for that already, since it also simplifies the code a little
(and improves it so we warn if the user does `jj squash -r @
nonexistent`).
We haven't used custom Git commit headers for two main reasons:
1. I don't want commits created by jj to be different from any other
commits. I don't want Git projects to get annoyed by such commit
and reject them.
2. I've been concerned that tools don't know how to handle such
headers, perhaps even resulting in crashes.
The first argument doesn't apply to commits with conflicts because
such commits would never be accepted by a project whether or not they
use custom commit headers. The second argument is less relevant for
conflicted commits because most tools will be confused by such commits
anyway.
Storing conflict information in commit headers means that we can
transfer them via the regular Git wire protocol. We already include
the tree objects nested inside the root-level tree, so they will also
be transferred.
So, let's start by writing the information redundantly to the commit
header and to the existing storage. That way we can roll it back if we
realize there's a problem with using commit headers.
This should address both use cases:
1. If from_relative_path() is directly called, the error says ".." shouldn't
be included in the (normalized) relative path.
2. If parse_fs_path() is used, the error message contains paths relative to
cwd. #3216
There's a caveat: "jj config list -Tname" will concatenate all names in a
single line. That's correct but useless. We might want some option or config
knob to complete missing "\n". This also applies to "log --no-graph".
This moves the config loading closer to CLI args where --tool=<name> option
will be processed. The factory function are proxied through the command helper
so that the base_ignores can be attached there later.
This gets rid of the last UserSettings dependency from edit_diff_external().
I'm going to remove it from edit_diff() too, and let callers pass a
preconfigured MergeTool struct instead.
These changes will make it easier to add --tool=<name> argument #2575.
Before, --tool=:builtin argument was ignored and the tool was loaded from
"ui.diff.tool" option. Since there is no single builtin diff format, :builtin
doesn't make sense here. Maybe we can translate ":<format>" to the internal
diff format instead, but that will also mean "ui.diff.tool" and ".format" can
be merged.
This partially reverts 409356fa5b "merge_tools: enable `:builtin` as default
diff/merge editor."
It was moved to CLI at 42252a2f00 "cli: on `jj init --git-repo=.`, use
relative path to `.git/`." As far as I can tell, .canonicalize() is needed
to calculate relative path, which is now processed differently in
Workspace::init_external_git() and GitBackend::init_external().
The translation from method error to keyword error can go wrong if the context
object had n-ary methods (n > 0), which isn't the case as of now. For
simplicity, arguments error is mapped to "self.<name>(..)" suggestion.
Local variables and "self" could be merged without using extra method, but
we'll need extend_*_candidates() to merge in symbol/function aliases anyway.
This seems more useful if aliases are nested. The innermost error usually
contains the problem, and the outer errors are contexts where aliases are
expanded.
The recovery commit we create when we run into a stale working copy
with a missing operation currently has an empty tree. Our commit
backend at Google creates an index of which files changed in each
commit. That gets really expensive when a commit deletes all files in
the repo, as these recovery commits do. So for our backend, it is much
better to make the recovery commit empty instead. That's what this
patch does.
It almost doesn't matter functionally what tree we use for it since we
don't care much about the current tree when snapshotting the working
copy. It does matter in a few cases, however. One case is for
conflicts. In that case, it's likely better to use the recovery
commit's parent as base tree (as we do by making the recovery commit
empty) than to use an empty tree, as that would guarantee that all
conflicts would be considered resolved. (Side note: perhaps we should
start looking at the current commit's parent instead of looking at the
current commit when snapshotting, but that's a topic for another day.)
When we abandon a working-copy commit, we create a new working-copy
commit on top. This behave is very useful, but it's not obvious. Let's
document it.
Thankfully, 2bbefcc338 (rewrite: default to not simplifying ancestor
merges) means that there are much fewer commands where we need to
document this behavior.
Add an option to list tracked branches only
This option keeps most of the current `--all` printing logic, but:
- Omits local Git-tracking branches by default (can be extended to
support filtering by remote).
- Skip over the branch altogether if it doesn't contain tracked remotes
- Don't print the untracked_remote_refs at the end
Usage:
`jj branch list -t`
`jj branch list --tracked`
`jj branch list --tracked <branch name>`
I think the user usually wants to abandon only newly empty commits. I
think they should use `jj abandon` if they want to get rid of already
empty commits. By keeping already empty commits, we don't need to
special-case the working copy and merge commits.
The description of `jj diff` was lost in commit b5e4e670. We later got
a short description for it in b5e4e670. This patch restores the
original description.
The default immutable_heads() includes tags(), which makes sense, but computing
heads(tags()) can be expensive because the tags() set is usually sparse. For
example, "jj bench revset 'heads(tags())'" took 157ms in my linux stable
mirror. We can of course optimize the heads evaluation by using bit set or
segmented index, but the query includes many historical heads if the repository
has per-release branches, which are uninteresting anyway. So, this patch
replaces heads(immutable_heads()) with trunk().
The reason we include heads(immutable_heads()) is to mitigate the following
problem. Suppose trunk() is the branch to be based off, I think using trunk()
here is pretty good.
```
A B
*---*----* trunk() ⊆ immutable_heads()
\
* C
```
https://github.com/martinvonz/jj/pull/2247#discussion_r1335078879
It should be useful at least in the presentation layer to know which
operations correspond to working-copy snapshots. They might be
rendered differently in the graph, for example. Or maybe an undo
command wants to warn if you just undid a snapshot operation. This
patch just introduces a field in the metadata to store the
information.
I think I prefer this behavior because it's less lossy. The user can
manually simplify the history with `jj rebase -s <merge commit> -d
<one of the parents>` afterwards. We can roll this change back later
if we find it annoying.
We now have lots of tests of ancestor merges in `test_bug_2600()`, so
we don't need the ones in `test_basics()`. Since it doesn't have the
"nottherootcommit" commit, it would break when we change the default
to preserve ancestor merges.
The shortest change id prefix will become a few digits longer, but I think
that's acceptable. Entries included in the "revsets.short-prefixes" set are
unaffected.
The reachable set is calculated eagerly, but this is still faster as we no
longer need to sort the reachable entries by change id. The lazy version will
save another ~100ms in mid-size repos.
"jj log" without working copy snapshot:
```
% hyperfine --sort command --warmup 3 --runs 20 -L bin jj-0,jj-1,jj-2 \
-s "target/release-with-debug/{bin} -R ~/mirrors/linux debug reindex" \
"target/release-with-debug/{bin} -R ~/mirrors/linux \
--ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=\"\"'"
Benchmark 1: target/release-with-debug/jj-0 -R ~/mirrors/linux --ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=""'
Time (mean ± σ): 353.6 ms ± 11.9 ms [User: 266.7 ms, System: 87.0 ms]
Range (min … max): 329.0 ms … 365.6 ms 20 runs
Benchmark 2: target/release-with-debug/jj-1 -R ~/mirrors/linux --ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=""'
Time (mean ± σ): 271.3 ms ± 9.9 ms [User: 183.8 ms, System: 87.7 ms]
Range (min … max): 250.5 ms … 282.7 ms 20 runs
Relative speed comparison
1.99 ± 0.16 target/release-with-debug/jj-0 -R ~/mirrors/linux --ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=""'
1.53 ± 0.12 target/release-with-debug/jj-1 -R ~/mirrors/linux --ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=""'
```
"jj status" with working copy snapshot (watchman enabled):
```
% hyperfine --sort command --warmup 3 --runs 20 -L bin jj-0,jj-1,jj-2 \
-s "target/release-with-debug/{bin} -R ~/mirrors/linux debug reindex" \
"target/release-with-debug/{bin} -R ~/mirrors/linux \
status --config-toml='revsets.short-prefixes=\"\"'"
Benchmark 1: target/release-with-debug/jj-0 -R ~/mirrors/linux status --config-toml='revsets.short-prefixes=""'
Time (mean ± σ): 396.6 ms ± 10.1 ms [User: 300.7 ms, System: 94.0 ms]
Range (min … max): 373.6 ms … 408.0 ms 20 runs
Benchmark 2: target/release-with-debug/jj-1 -R ~/mirrors/linux status --config-toml='revsets.short-prefixes=""'
Time (mean ± σ): 318.6 ms ± 12.6 ms [User: 219.1 ms, System: 94.1 ms]
Range (min … max): 294.2 ms … 333.0 ms 20 runs
Relative speed comparison
1.85 ± 0.14 target/release-with-debug/jj-0 -R ~/mirrors/linux status --config-toml='revsets.short-prefixes=""'
1.48 ± 0.12 target/release-with-debug/jj-1 -R ~/mirrors/linux status --config-toml='revsets.short-prefixes=""'
```
When adding a new workspace, I would expect that it inherits the
patterns from the workspace I ran the command in. We currently don't
do that. That's quite annoying when your repo has very many files
(like at Google).
The `ContentHash` documentation specifies that implementations for enums should
hash the ordinal number of the variant contained in the enum as a 32-bit
little-endian number and then hash the contents of the variant, if any.
The current implementations for `std::Option`, `MergedTreeId`, and
`RemoteRefState` are non-conformant since they hash the ordinal number as a u8
with platform specific endianness.
Fixes#3051
The legacy parsing rules are turned into compatibility errors. The x:y rule
is temporarily enabled when parsing string patterns. It's weird, but we can't
isolate the parsing function because a string pattern may be defined in an
alias.
This adds a config to render a synthetic node with a "(elided
revisions)" description for elided segments of the graph.
I didn't add any templating support for the elided nodes because I'm
not sure how we would want that to work. In particular, I don't know
what `commit_id` and most other keywords should return for elided
revisions.
Users who edit non-head commits usually expect `jj next/prev` to
continue to edit the next/previous commit, so let's make that the
default behavior. This should not confuse users who don't edit
non-head commits since they will simply not be in this state. My main
concern is that doing `jj next; jj prev` will now usually take you
back to the previous commit, but not if you started on the parent of a
head commit.
The main goal is to avoid having a symlink in our source tree. Currently, there
is no good way to work with the `jj` repo with `jj` on Windows. Currently `jj`
just crashes with symlinks. This is being worked on, see e.g. #2939, but it will
always depend on whether Developer Mode is enabled in Windows or whether
symlinks are materialized as text files with symlinks. Finally, MkDocs has
trouble following symlinks on Windows, so building docs wouldn't work there.
Another advantage is that, previously, we were lucky that MkDocs treats `insta`
header in `cli-reference@.md.snap` as a Markdown header and follows symlinks at
all. Now, we no longer depend on that.
If the operation corresponding to a workspace is missing for some reason
(the specific situation in the test in this commit is that an operation
was abandoned and garbage-collected from another workspace), currently,
jj fails with a 255 error code. Teach jj a way to recover from this
situation.
When jj detects such a situation, it prints a message and stops
operation, similar to when a workspace is stale. The message tells the
user what command to run.
When that command is run, jj loads the repo at the @ operation (instead
of the operation of the workspace), creates a new commit on the @
commit with an empty tree, and then proceeds as usual - in particular,
including the auto-snapshotting of the working tree, which creates
another commit that obsoletes the newly created commit.
There are several design points I considered.
1) Whether the recovery should be automatic, or (as in this commit)
manual in that the user should be prompted to run a command. The user
might prefer to recover in another way (e.g. by simply deleting the
workspace) and this situation is (hopefully) rare enough that I think
it's better to prompt the user.
2) Which command the user should be prompted to run (and thus, which
command should be taught to perform the recovery). I chose "workspace
update-stale" because the circumstances are very similar to it: it's
symptom is that the regular jj operation is blocked somewhere at the
beginning, and "workspace update-stale" already does some special work
before the blockage (this commit adds more of such special work). But it
might be better for something more explicitly named, or even a sequence
of commands (e.g. "create a new operation that becomes @ that no
workspace points to", "low-level command that makes a workspace point to
the operation @") but I can see how this can be unnecessarily confusing
for the user.
3) How we recover. I can think of several ways:
a) Always create a commit, and allow the automatic snapshotting to
create another commit that obsoletes this commit.
b) Create a commit but somehow teach the automatic snapshotting to
replace the created commit in-place (so it has no predecessor, as viewed
in "obslog").
c) Do either a) or b), with the added improvement that if there is no
diff between the newly created commit and the former @, to behave as if
no new commit was created (@ remains as the former @).
I chose a) since it was the simplest and most easily reasoned about,
which I think is the best way to go when recovering from a rare
situation.
These operator symbols are different from the ones in the revset language. I
have no idea if we need bitwise operators, but we'll probably add comparison
operators. It would look weird if 'x == y & z' were parsed as '(x == y) & z'.
this greatly speeds up the time to run all tests, at the cost of slightly larger recompile times for individual tests.
this unfortunately adds the requirement that all tests are listed in `runner.rs` for the crate.
to avoid forgetting, i've added a new test that ensures the directory is in sync with the file.
## benchmarks
before this change, recompiling all tests took 32-50 seconds and running a single test took 3.5 seconds:
```
; hyperfine 'touch lib/src/lib.rs && cargo t --test test_working_copy'
Time (mean ± σ): 3.543 s ± 0.168 s [User: 2.597 s, System: 1.262 s]
Range (min … max): 3.400 s … 3.847 s 10 runs
```
after this change, recompiling all tests take 4 seconds:
```
; hyperfine 'touch lib/src/lib.rs ; cargo t --test runner --no-run'
Time (mean ± σ): 4.055 s ± 0.123 s [User: 3.591 s, System: 1.593 s]
Range (min … max): 3.804 s … 4.159 s 10 runs
```
and running a single test takes about the same:
```
; hyperfine 'touch lib/src/lib.rs && cargo t --test runner -- test_working_copy'
Time (mean ± σ): 4.129 s ± 0.120 s [User: 3.636 s, System: 1.593 s]
Range (min … max): 3.933 s … 4.346 s 10 runs
```
about 1.4 seconds of that is the time for the runner, of which .4 is the time for the linker. so
there may be room for further improving the times.
When the user doesn't have a configured default command, we show a
hint saying to set `ui.default-command`. I think the user is very
likely to want to set that in the user-wide config, so let's include
the command in the hint.
This reimplements the change 9faa4670d5 "cli: on init, import git refs prior
to importing HEAD." Initialization is special because the HEAD ref isn't
available to jj yet, and there is an empty working-copy commit.
The initialization function could be refactored to go through the common code
path, but I think doing that would make future improvement harder. We might
want to initialize tracking branches based on .git/config for example.
Fixes#2942
This initializes a git backed repo.
* It does the same thing as `jj init --git` except that it
has a --colocated flag to explicitly specify that we want
the .git repo to be side-by-side the .jj repo in the working
directory.
* `jj init --git` will keep the current behaviour and will not
be able to create colocated git backed repos.
* Update test snapshots.
A few minor updates after 0f27152 AKA #2945
Specifically, I tried to change the help text so that it looks better as
Markdown. I also reworded the deprecation warning and added a hint.
this has two main advantages:
- it makes it clear that the shells are mutually exclusive
- it allows us to extend the command with shell-specific options in the future if necessary
as a happy accident, it also adds support for `elvish` and `powershell`.
for backwards compatibility, this also keeps the existing options as hidden flags.
i am not super happy with how the new help looks; the instructions for setting up the shell are
squished together and IMO a little harder to read. i'm open to suggestions.
it's somewhat confusing to me that the `--bash` flag exists at all, since it does nothing - maybe it makes sense to give a hard error? or just remove the flag?
but in any case, it seems good to document the existing behavior.
previously, `jj diff` would show the full contents of binary files such as images.
after this change, it instead shows "(binary)". it still shows the filename and metadata so that
users can open the file in the viewer of their choce.
future work could involve showing binary files as Sixel or similar; finding a way to compare large
non-binary files without filling up the screen; or extending the data backends to avoid having to
read the whole file contents into memory.
Previously, `jj git push; jj git push` would tell the user that "No
branches point to the specified revisions.". I found this confusing,
even though strictly speaking it is correct (as the default revset only
considers revisions that haven't been pushed to the remote).
Closes#2241
The error output gets more verbose because all gix error sources are printed.
Maybe we'll need a better formatting, but changing to multi-line output doesn't
look nice either.
Summary: As discussed in Discord, on GitHub, and elsewhere, this change
deprecates the use of `jj merge` and suggests users use `jj new` exclusively
instead. `merge` isn't completely unfit as a name; but we think it obscures
the generality of `new` and we want people to use it instead.
To further drive the bit home, by default, `jj merge` is now hidden. This will
hopefully stop new users from running into it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I94938aca9d3e2aa12d1394a5fbc58acce3185b56
Summary: As discussed in Discord, on GitHub, and elsewhere, this change
deprecates the use of `jj checkout` and suggests users use `jj new` exclusively
instead. The verb `checkout` is a relic of a bygone era the — days of RCS
file locking, before 3-way merge — and is not a good, fitting name for the
functionality it provides.
To further drive the bit home, by default, `jj checkout` (and `jj co`) is now
hidden. This will hopefully stop new users from running into it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I7a1adfc9168fce1f25cf5d4c4c313304769e41a1
These didn't really need to use `jj checkout`, and it will be deprecated in a
future change anyway. Move them out of there and into `new`.
Ideally this would go into `test_conflicts.rs`, but that exists in `jj-lib`, so
it doesn't have `TestEnvironment` available to it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: If0173b27ab4d1f6036a4ec632ec77b6824f310c3
