Previously, this command would work:
jj --config-toml='snapshot.max-new-file-size="1"' st
And is equivalent to this:
jj --config-toml='snapshot.max-new-file-size="1B"' st
But this would not work, despite looking like it should:
jj --config-toml='snapshot.max-new-file-size=1' st
This is extremely confusing for users.
This config value is deserialized via serde; and while the `HumanByteSize`
struct allegedly implemented Serde's `visit_u64` method, it was not called by
the deserialize visitor. Strangely, adding an `visit_i64` method *did* work, but
then requires handling of overflow, etc. This is likely because TOML integers
are naturally specified in `i64`.
Instead, just don't bother with any of that; implement a `TryFrom<String>`
instance for `HumanByteSize` that uses `u64::from_str` to try parsing the string
immediately; *then* fall back to `parse_human_byte_size` if that doesn't work.
This not only fixes the behavior but, IMO, is much simpler to reason about; we
get our `Deserialize` instance for free from the `TryFrom` instance.
Finally, this adjusts the test for `max-new-file-size` to now use a raw integer
literal, to ensure it doesn't regress. (There are already in-crate tests for
parsing the human readable strings.)
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I8dafa2358d039ad1c07e9a512c1d10fed5845738
This fixes several issues that made working with empty files difficult using
the builtin diff editor.
1. The scm-record library used for the editor expects each file to have at
least one section. For new empty files this should be a file mode section. jj
wasn't rendering this mode section, which prevented empty files from being
selected at all.
2. The scm-record library returns `SelectedContents::Absent` if the file has no
contents after the diff editor is invoked. This can be because of several
reasons: 1) the file is new and empty; 2) the file was empty before and is
still empty; 3) the file has been deleted. Perhaps this is a bug in scm-record
and it should return `SelectedContents::Unchanged` or
`SelectedContents::Present` if the file hasn't been deleted. Until this is
patched upstream, we can work around it by disambiguating these cases.
See https://github.com/arxanas/scm-record/issues/26 for the upstream bug.
Fixes#3016
if `--use-destination-message/-u` is passed to `jj squash`, the resulting
revision will use the description of the destination revision and the
description(s) of the source revision(s) will be discarded.
If this doesn't work out, maybe we can try one of these:
a. fall back to bare file name if expression doesn't contain any operator-like
characters (e.g. "f(x" is an error, but "f x" can be parsed as bare string)
b. introduce command-line flag to opt in (e.g. -e FILESET)
c. introduce pattern prefix to opt in (e.g. set:FILESET)
Closes#3239, #2915, #2286
This command checks not only whether Watchman works, but also whether
it's enabled in the config. Also, the output is easier to understand
than that of the other `jj debug watchman` commands.
It would be nice if `jj debug watchman` called `jj debug watchman
status`, but it's not trivial in `clap` to have a default subcommand.
Ilya reported this in https://github.com/martinvonz/jj/issues/3483.
The bug was introduced in 976320726d.
Before this fix, `jj split` dropped any parents what weren't involved in the
split when it rebased the children of the commit being split. This meant that
any children which were merge commits lost their other parents unintentionally.
Fixes#3483
Before this commit `jj prev` fails if the current working copy commit is a
merge commit. After this commit it will prompt the user to choose the ancestor
they want to select.
#2126
Expose the information we now record, to allow changing the default "snapshot
working copy" message or to make snapshots more compact/less distracting in
the log
This is basically the same as string kind:pattern syntax in CLI. This will
hopefully be superseded by filesets, but I'm not sure if that will work out.
A file name is more likely to contain whitespaces, which will have to be
quoted as '"Documents and Settings"'.
Parallelize revisions by making them siblings
Running `jj parallelize 1::2` will transform the history like this:
```text
3
| 3
2 / \
| -> 1 2
1 \ /
| 0
0
```
Each of the target revisions is rebased onto the parents of the root(s) of
the target revset (not to be confused with the repo root). The children of
the head(s) of the target revset are rebased onto the target revisions.
The target revset is the union of the REVISIONS arguments.
The target revset being parallelized must satisfy several conditions,
otherwise the command will fail.
1. The heads of the target revset must not have different children.
2. The roots of the target revset must not have different parents.
3. The parents of all target revisions except the roots must also be
parallelized. This means that the target revisions must be connected.
This lets users use "large" revsets in commands such as `jj rebase`, without
needing the `all:` modifier.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ica80927324f3d634413d3cc79fbc73057ccefd8a
I keep typing `--to` since I'm used to `jj move` interface. It is
also shorter.
Currently, if I type `--to`, clap unhelpfully suggests whether I
meant `--tool`.
Like -r/--revisions, it should be okay to filter synced/non-tracking remote
branches by name.
conflicts_with_all = "tracked" is redundant, so removed as well. The tracked
field declares that it conflicts with --all-remotes.
If the --siblings option is used, the target commit is split into two sibling
commits instead of parent and child commits. Any children of the original
commit will have both siblings as their new parents.
#2274
Note that `jj resolve` already had its own `--quiet` flag. The output
with `--quiet` for that command got a lot quieter with the global
`--quiet` also taking effect. That seems reasonable to me.
Commands like `new`, `duplicate`, and `abandon` can take multiple revset
arguments which results in their collective union. They take the revisions
directly as arguments. But for consistency with many other commands, they can
also take the `-r` argument, which is a no-op. However, due to the flag being
specified as a `bool`, the `-r` option can only be specified once, so e.g.
`abandon -r x -r y` often fails. I normally use `-r` for consistency and muscle
memory, so this bites me often.
Instead, use `clap::ArgAction::Count` in order to allow `-r` to be specified
multiple times. It remains unused, of course.
With this change, all the following invocations are equivalent. Before this
change, the second example would fail due to giving `-r` multiple times.
jj abandon x y
jj abandon -r x -r y
jj abandon -r 'x | y'
Note: `jj new` already supported this exact case actually, but it used an
awkward trick where it used `.overrides_with()` in order to override *itself* so
it could be specified multiple times. I believe this is a bit clearer.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ib36cf81d46dae4f698f06d0a32e8fd3120bfb4a4
This can be used to flatten nested "if()"s. It's not exactly the same as "case"
or "switch" expression, but works reasonably well in template. It's not uncommon
to show placeholder text in place of an empty content, and a nullish value
(e.g. empty string, list, option) is usually rendered as an empty text.
As requested in #1471, I added a new flag for `jj branch list` to only show branches that are conflicted.
Adds a unit test to check for listing only conflicted branches and regenerates the cli output to incorporate the new flag.
Closes#1471
reformat
As discussed in #2900, the milliseconds are rarely useful, and it can
be confusing with different timezones because it makes harder to
compare timestamps.
I added an environment variable to control the timestamp in a
cross-platform way. I didn't document because it exists only for tests
(like `JJ_RANDOMNESS_SEED`).
Closes#2900
Changes the formatter to accept not only existing color names (such as "red" or
"green") but also those in the form #rrggbb, where rr, gg, and bb are two-digit
hexadecimal numbers. This allows much finer control over colors used.
Now you can do e.g. `jj squash --from 'foo+::' --into foo` to squash a
whole series into one commit. It doesn't need to be linear; you can
squash a bunch of siblings into another siblings, for example.
This was proposed by @Brixy in
https://github.com/martinvonz/jj/discussions/2882 a while ago. There
seems to be pretty strong consensus that it's a good idea.
I've copied the added test cases from `test_move_command.rs`, just
replacing `move` by `squash`, `--to` by `--into`, and deleting the
test of a no-arg invocation (`jj move` fails, `jj squash` does not -
it defaults to squashing into the parent).
Commit b4c4d911 introduced this entry in the changelog, but put it in the 0.15.0
section rather than the new unreleased section.
This was probably just because the original commit was authored before the
0.15.0 release, but merged after. Such is life.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
