I used to use "remote_branches() & ~mine()" to exclude "their" branches from
the default log, and I don't think that's uncommon requirement. Suppose
untracked branches are usually read-only, it's probably okay to make them
immutable by default.
Adds support for revset functions `tracked_remote_branches()` and
`untracked_remote_branches()`. I think this would be especially useful
for configuring `immutable_heads()` because rewriting untracked remote
branches usually wouldn't be desirable (since it wouldn't update the
remote branch). It also makes it easy to hide branches that you don't
care about from the log, since you could hide untracked branches and
then only track branches that you care about.
Partially resolve a 1.5‐year‐old TODO comment.
Add opt‐in syntax for case‐insensitive matching, suffixing the
pattern kind with `-i`. Not every context supports case‐insensitive
patterns (e.g. Git branch fetch settings). It may make sense to make
this the default in at least some contexts (e.g. the commit signature
and description revsets), but it would require some thought to avoid
more confusing context‐sensitivity.
Make `mine()` match case‐insensitively unconditionally, since email
addresses are conventionally case‐insensitive and it doesn’t take
a pattern anyway.
This currently only handles ASCII case folding, due to the complexities
of case‐insensitive Unicode comparison and the `glob` crate’s lack
of support for it. This is unlikely to matter for email addresses,
which very rarely contain non‐ASCII characters, but is unfortunate
for names and descriptions. However, the current matching behaviour is
already seriously deficient for non‐ASCII text due to the lack of any
normalization, so this hopefully shouldn’t be a blocker to adding the
interface. An expository comment has been left in the code for anyone
who wants to try and address this (perhaps a future version of myself).
The output looks somewhat similar to color-words diffs. Unified diffs are
verbose, but are easier to follow if adjacent lines are added/removed + modified
for example.
Word-level diffing is forcibly enabled. We can also add a config knob (or
!color condition) to turn it off to save CPU time.
I originally considered disabling highlights in block insertion/deletion, but
that wasn't always great. This can be addressed separately as it also applies
to color-words diffs. #3958
Forgetting a workspace removes its working-copy commit, so it makes
sense for it to be abandoned if it is discardable just like editing a
new commit will cause the old commit to be abandoned if it is
discardable.
The default style is compatible with various terminal emulators, but I suspect
that many people wouldn't like underlines. Let's add an example to override it.
Fixes#2476.
Previously, if there was a change id match within the short prefix
lookup set, `jj` would not look for commits with that same change id
outside the short prefix set. So, it wouldn't find the conflicted
commits for a commit with a divergent (AKA conflicted) change id.
It's common to create empty working-copy commits while using jj, and
currently the author timestamp for a commit is only set when it is first
created. If you create an empty commit, then don't work on a repo for a
few days, and then start working on a new feature without abandoning the
working-copy commit, the author timestamp will remain as the time the
commit was created rather than being updated to the time that work began
or finished.
This commit changes the behavior so that discardable commits (empty
commits with no description) by the current user have their author
timestamps reset when they are rewritten, meaning that the author
timestamp will become finalized whenever a commit is given a description
or becomes non-empty.
We now have two `cmd_show` in the repo. I think this one should become
`cmd_file_show`, but this should be done uniformly over all the commands
for consistency.
I did *not* keep `print` as an alias (I couldn't find a compelling
reason to do it), but let me know if anyone feels like keeping it.
Since "set <thing>" often adds a <thing> if not exists, it make some sense
that "branch set" does upsert. The current "branch set" use case is now covered
by "branch move", so it's okay to change the "set" behavior.
If new branch is created by "branch set", status message and hint will be
printed to help migration. The user should be able to undo creation if it was
a mistake.
Closes#3584
This allows users to jump to the next conflict in the ancestors or children of
the start commit.
Continues work on #2126
Co-Authored-By: Noah Mayr <dev@noahmayr.com>
In a repo of mine I wanted to do something like the following to push all of my
leaves to the remote as backup:
jj git push -c 'all:heads(base::) & mine() ~ empty()'
But couldn't, because `jj git push` doesn't handle large revsets, even though
it does handle multiple `-c` arguments, so I had to work out some pipe-to-xargs
command instead.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This basically supersedes the current "branch set" command. The plan is to turn
"branch set" into an "upsert" command, and deprecate "branch create". (#3584)
Maybe we can also add "branch set --new" flag to only allow creation of new
branches. One reason behind this proposed change is that "set" usually allows
both "creation" and "update". However, we also need a typo-safe version of
"set" to not create new branches by accident.
"jj branch move" is useful when advancing ancestor branches. Let's say you've
added a couple of commits on top of an existing PR branch, you can advance the
branch by "jj branch move --from 'heads(::@- & branches())' --to @-". If this
pattern is super common, maybe we can add --advance flag for short.
One drawback of this change is that "git branch --move" is equivalent to
"jj branch rename". I personally don't find this is confusing, but it's true
that "move" sometimes means "rename".
- make an internal set of watchman extensions until the client api gets
updates with triggers
- add a config option to enable using triggers in watchman
Co-authored-by: Waleed Khan <me@waleedkhan.name>
Still alias function shadows builtin function (of any arity) by name. This
allows to detect argument error as such, but might be a bit inconvenient if
user wants to overload heads() for example. If needed, maybe we can add some
config/revset syntax to import builtin function to alias namespace.
The functions table is keyed by name, not by (name, arity) pair. That's mainly
because std collections require keys to be Borrow, and a pair of borrowed
values is incompatible with owned pair. Another reason is it makes easy to look
up overloads by name.
Alias overloading could also be achieved by adding default parameters, but that
will complicate the implementation a bit more, and can't prevent shadowing of
0-ary immutable_heads().
Closes#2966
Most of the value of `jj fix` over a shell script is in formatting commits
other than `@`. `@::` often doesn't contain those other commits, so `-s @` is a
bad default.
We could get the same effect from `-s 'mutable() & ::@'`, but `reachable()` is
a bit more explicit and simple to read.
We could also base this on excluding `trunk()`, but that just seems like an
indirection for `mutable()` that might ignore the user's intent if they have
configured part of trunk to be mutable.
It's been more than 6 months since we added support for dynamically
selecting the working copy implementation. This patch drops support
for selecting the default implementation of that and other stores.
This addresses issue #3317, where as discussed we want to show the paths to
configuration files if they contain errors, to make it easier for the user to
locate them.
The goal is to remove special case from parsing functions and provide slightly
better error message. I don't know if we'd want to use "all:" in aliases, but
there are no strong reasons to disable it.
This commit adds an optional flag to be able to push commits with an
empty description to a remote git repo. While the default behavior is
ideal we might need to interact with a repo that has an empty commit
description in it. I ran into this issue a few weeks ago pushing commits
from an open source repo to an empty repo and had to go back to using
git for that push as I would not want to rewrite the history which was
many many years long just for that.
This flag allows users an escape hatch for pushing empty descriptions
for commits and they're sure that they want that behavior.
This commit adds the flag to the `git push` command and updates the docs
for the command. It also updates the original test to make sure that the
flag works as intended to reject the commit when not set and to allow
the commit when the flag is set.
Closes#2633
Clear the rest of the cursor line (from the cursor to the end of the
row) after drawing the progress bar rather than clearing the entire line
before drawing. This reduces flickering on terminal emulators which are
able to redraw rapidly.
I recently needed to test something on top of a two branches at the
same time, so I created a new commit on top of both of them (i.e. a
merge commit). I then ran tests and made some adjustments to the
code. These adjustments belonged in one of the parent branches, so I
used `jj squash --into` to squash it in there. Unfortunately, that
meant that my working copy became a single-parent commit based on one
of the branches only. We already had #2859 for tracking this issue.
This patch changes the behavior so we create a new working-copy commit
with all of the previous parents.
As explained in the commit, our logic is a bit more complicated than
that of `git push --force-with-lease`. This is to match the behavior of
`jj git fetch` and branch conflict resolution rules.
I add them as aliases, since a user may instead choose to define `immutable_heads()`, for example, as `heads(immutable())`, and the define `immutable()` instead.
This revset correctly implements "reachability" from a set of source commits following both parent and child edges as far as they can go within a domain set. This type of 'bfs' query is currently impossible to express with existing revset functions.
previously, aliases to built-in commands were silently ignored. this matches git's behavior, but seems unhelpful, especially if the user doesn't know that a command with that name already exists.
give a warning rather than silently ignoring it.
When using `ui.color = "debug"`, changes in the output style
additionally include delimiters << and >>, as well as all active labels
at this point separated by ::. The output is otherwise unformatted and
the delimiters and labels inherit the style of the content they apply
to.
Perhaps, this can be used to generate parsable branches list.
The hint for deleted branches isn't migrated to the template. I'm thinking of
moving it out of the loop and printed once at the end. If we want to generate
a hint in template, we'll probably need local_ref.tracking_remote_refs(), etc.
that return a list of RefNames.
For example,
```
<<<<<<< Conflict 1 of 3
+++++++ Contents of side #1
left 3.1
left 3.2
left 3.3
%%%%%%% Changes from base to side #2
-line 3
+right 3.1
>>>>>>>
```
or
```
<<<<<<< Conflict 1 of 1
%%%%%%% Changes from base to side #1
-line 3
+right 3.1
+++++++ Contents of side #2
left 3.1
left 3.2
left 3.3
>>>>>>>
```
Currently, there is no way to disable these, this is TODO for a future
PR. Other TODOs for future PRs: make these labels configurable. After
that, we could support a `diff3/git`-like conflict format as well, in
principle.
Counting conflicts helps with knowing whether you fixed all the
conflicts while you are in the editor.
While labeling "side #1", etc, does not tell you the commit id or
description as requested in #1176, I still think it's an improvement.
Most importantly, I hope this will make `jj`'s conflict format less
scary-looking for new users.
I've used this for a bit, and I like it. Without the labels, I would see
that the two conflicts have a different order of conflict markers, but I
wouldn't be able to remember what that means. For longer diffs, it can
be tricky for me to quickly tell that it's a diff as opposed to one of
the sides. This also creates some hope of being able to navigate a
conflict with more than 2 sides.
Another not-so-secret goal for this is explained in
https://github.com/martinvonz/jj/pull/3109#issuecomment-2014140627. The
idea is a little weird, but I *think* it could be helpful, and I'd like
to experiment with it.
Thanks to everyone who's contributed!
Unlike previous releases, I went through the changelog entries and
reorganized them a bit.
We didn't have anything under "Deprecations" this time, but I moved
the heading after "Breaking changes" for next release. I think
breaking changes are more important because deprecations are just
about giving a heads up before it actually breaks.
Since fileset/revset/template expressions are specified as command-line
arguments, it's sometimes convenient to use single quotes instead of double
quotes. Various scripting languages parse single-quoted strings in various ways,
but I choose the TOML rule because it's simple and practically useful. TOML is
our config language, so copying the TOML syntax would be less surprising than
borrowing it from another language.
https://github.com/toml-lang/toml/issues/188
Previously, this command would work:
jj --config-toml='snapshot.max-new-file-size="1"' st
And is equivalent to this:
jj --config-toml='snapshot.max-new-file-size="1B"' st
But this would not work, despite looking like it should:
jj --config-toml='snapshot.max-new-file-size=1' st
This is extremely confusing for users.
This config value is deserialized via serde; and while the `HumanByteSize`
struct allegedly implemented Serde's `visit_u64` method, it was not called by
the deserialize visitor. Strangely, adding an `visit_i64` method *did* work, but
then requires handling of overflow, etc. This is likely because TOML integers
are naturally specified in `i64`.
Instead, just don't bother with any of that; implement a `TryFrom<String>`
instance for `HumanByteSize` that uses `u64::from_str` to try parsing the string
immediately; *then* fall back to `parse_human_byte_size` if that doesn't work.
This not only fixes the behavior but, IMO, is much simpler to reason about; we
get our `Deserialize` instance for free from the `TryFrom` instance.
Finally, this adjusts the test for `max-new-file-size` to now use a raw integer
literal, to ensure it doesn't regress. (There are already in-crate tests for
parsing the human readable strings.)
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I8dafa2358d039ad1c07e9a512c1d10fed5845738
This fixes several issues that made working with empty files difficult using
the builtin diff editor.
1. The scm-record library used for the editor expects each file to have at
least one section. For new empty files this should be a file mode section. jj
wasn't rendering this mode section, which prevented empty files from being
selected at all.
2. The scm-record library returns `SelectedContents::Absent` if the file has no
contents after the diff editor is invoked. This can be because of several
reasons: 1) the file is new and empty; 2) the file was empty before and is
still empty; 3) the file has been deleted. Perhaps this is a bug in scm-record
and it should return `SelectedContents::Unchanged` or
`SelectedContents::Present` if the file hasn't been deleted. Until this is
patched upstream, we can work around it by disambiguating these cases.
See https://github.com/arxanas/scm-record/issues/26 for the upstream bug.
Fixes#3016
if `--use-destination-message/-u` is passed to `jj squash`, the resulting
revision will use the description of the destination revision and the
description(s) of the source revision(s) will be discarded.
If this doesn't work out, maybe we can try one of these:
a. fall back to bare file name if expression doesn't contain any operator-like
characters (e.g. "f(x" is an error, but "f x" can be parsed as bare string)
b. introduce command-line flag to opt in (e.g. -e FILESET)
c. introduce pattern prefix to opt in (e.g. set:FILESET)
Closes#3239, #2915, #2286
This command checks not only whether Watchman works, but also whether
it's enabled in the config. Also, the output is easier to understand
than that of the other `jj debug watchman` commands.
It would be nice if `jj debug watchman` called `jj debug watchman
status`, but it's not trivial in `clap` to have a default subcommand.
Ilya reported this in https://github.com/martinvonz/jj/issues/3483.
The bug was introduced in 976320726d.
Before this fix, `jj split` dropped any parents what weren't involved in the
split when it rebased the children of the commit being split. This meant that
any children which were merge commits lost their other parents unintentionally.
Fixes#3483
Before this commit `jj prev` fails if the current working copy commit is a
merge commit. After this commit it will prompt the user to choose the ancestor
they want to select.
#2126
