These didn't really need to use `jj checkout`, and it will be deprecated in a
future change anyway. Move them out of there and into `new`.
Ideally this would go into `test_conflicts.rs`, but that exists in `jj-lib`, so
it doesn't have `TestEnvironment` available to it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: If0173b27ab4d1f6036a4ec632ec77b6824f310c3
This prevents rust doctests from trying to compile the code blocks.
I don't think we use doctests much or at all, but I'd like
`cargo insta test --test-runner nextest --accept --workspace`
to pass.
Unfortunately, this affects the output of `jj help` as well, but I
can't think of a workaround for that.
I am using a very hacky approach, using `insta` to generate the markdown help.
This is based on a lucky coincidence that `insta` chose to use a header
format for snapshot files that MkDocs interprets as a Markdown header (and
ignores).
I considered several other approaches, but I couldn't resist the facts that:
- This doesn't require new developers to install any extra tools or run any
extra commands.
- There is no need for a new CI check.
- There is no need to compile `jj` in the "Make HTML docs" GitHub action,
which is currently very fast and cheap.
Downside: I'm not sure how well MkDocs will work on Windows, unless the
developer explicitly enables symbolic links (which IIUC is not trivial).
### Possible alternatives
My next favorite approaches (which we could switch to later) would be:
#### `xtask`
Set up a CI check and a [Cargo `xtask`] so that `cargo xtask cli-help-to-md`
essentially runs `cargo run -- util markdown-help > docs/cli-reference.md` from
the project root.
Every developer would have to know to run `cargo xtask cli-help-to-md` if
they change the help text.
Eventually, we could have `cargo xtask preflight` that runs `cargo +nightly
fmt; cargo xtask cli-help-to-md; cargo nextest run`, or `cargo insta`.
#### Only generate markdown for CLI help when building the website, don't track it in Git.
I think that having the file in the repo will be nice to preview changes to
docs, and it'll allow people to consult the file on GitHub or in their repo.
The (currently) very fast job of building the website would now require
installing Rust and building `jj`.
#### Same as the `xtask`, but use a shell script instead of an `xtask`
An `xtask` might seem like overkill, since it's Rust instead of a shell script.
However, I don't want this to be a shell script so that new contributors on
Windows can still easily run it ( since this will be necessary for the CI to
pass) without us having to support a batch file.
#### Cargo Alias
My first attempt was to set up a [cargo alias] to run this, but that doesn't
support redirection (so I had to change the `jj util` command to output to a
file) and, worse, is incapable of executing the command *in the project root*
regardless of where in the project the current directory is. Again, this seems
to be too inconvenient for a command that every new PR author would have to run
to pass CI.
Overall, this just seems a bit ugly. I did file
https://github.com/rust-lang/cargo/issues/13348, I'm not really sure that was
worthwhile, though.
**Aside:** For reference, the alias was:
```toml
# .cargo/config.toml
alias.gen-cli-reference = "run -p jj-cli -- util markdown-help docs/cli-reference.md"
```
### Non-alternatives
#### Clap's new feature
`clap` recently obtained a similarly-sounding feature in
https://github.com/clap-rs/clap/pull/5206. However, it only prints short help
for subcommands and can't be triggered by an option AFAICT, so it won't help us
too much.
[Cargo `xtask`]: https://github.com/matklad/cargo-xtask
[cargo alias]: https://doc.rust-lang.org/cargo/reference/config.html#alias
The "::HEAD" set is usually smaller than "::git_refs". If these sets were
imported in that order, "HEAD..git_refs" commits would be indexed on top of
the "::HEAD" commits. It's not a problem, but undesirable.
This is a convenient command, for scripting things like `cd $(jj root)
&& do something`, and it seems better to allow people to find it
before they learn about workspaces.
The count() function in this trait is used by "jj branch" to determine
(and then report) how many commits a certain branch is ahead/behind
another branch. This is currently implemented by walking all commits
in the revset, counting how many were encountered. But this could be
improved: if the number is large, it is probably sufficient to report
"at least N" (instead of walking all the way), and this does not scale
well to jj backends that may not have all commits present locally (which
may prefer to return an estimate, rather than access the network).
Therefore, add a function that is explicitly documented to be O(1)
and that can return a range of values if the backend so chooses.
Also remove count(), as it is not immediately obvious that it is an
expensive call, and callers that are willing to pay the cost can obtain
the exact same functionality through iter().count() anyway. (In this
commit, all users of count() are migrated to iter().count() to preserve
all existing functionality; they will be migrated to count_estimate() in
a subsequent commit.)
"branch" needed to be updated due to this change. Although jj
is currently only available in English, I have attempted to keep
user-visible text from being assembled piece by piece, so that if we
later decide to translate jj into other languages, things will be easier
for translators.
It seems obvious in hindsight to have a virtual root operation just
like we have a virtual root commit. It removes the same kind of
problems by making sure there's always a common ancestor (or multiple)
between any two commits.
I think the reason I didn't add a root operation from the beginning
was that there used to be a mandatory working-copy commit in the view
(this was before support for multiple workspaces).
Perhaps we should remove the "initialize repo" operation now. The only
difference between their view objects is that the "initialize repo"
operation adds the root commit as a head. We could add that to the
root operation, but then the root operation's value depends on the
commit backend.
We've had the public_heads for as long as we've had the View object,
IIRC (I didn't check), but we still don't use it for anything. I don't
have any concrete plans for using it either. Maybe our config for
immutable commits is good enough, or maybe we'll want something more
generic (like Mercurial's phases). For now, I think we should simplify
by removing it the storage for public heads.
When debugging behavior of badly-GCed repos, I find it's annoying that "op log"
fails because the index can't be loaded. Since "op log" doesn't need a repo, I
think it's better to display the exact op-heads state without merging.
If indexing failed due to missing commit objects, the repo won't be loadable
without --ignore-working-copy (at least in colocated environment.) In that
case, we can use "op abandon" to recover, but we had to work around the failed
index loading by --ignore-working-copy. Since "op abandon" isn't a repo-level
command, it's better to bypass working-copy snapshot and import of git refs at
all.
--at-op is rejected because it's useless and we'll need extra care for "@"
expression resolution and working-copy updates.
The formatting is closer to hg than git just because it's easier to
conditionalize the whole line per keyword. Our template language doesn't
have infix logical operators.
Unlike the other default templates, all remote branches are displayed because
it's "detailed" output.
Closes#2509
It doesn't make sense to do gc from a non-head operation because that means
either the head operation would be corrupted or the --at-op argument is
ignored.
I'm going to add try_from_hex(), which requires Self: Sized. Such trait bound
could be added, but I don't think we'll need abstracted ObjectId constructors
at all.
I'm going to add a prefix resolution method to OpStore, but OpStore is
unrelated to the index. I think ObjectId, HexPrefix, and PrefixResolution can
be extracted to this module.
In order to implement GC (#12), we'll need to somehow prune old operations.
Perhaps the easiest implementation is to just remove unwanted operation files
and put tombstone file instead (like git shallow.) However, the removed
operations might be referenced by another jj process running in parallel. Since
the parallel operation thinks all the historical head commits are reachable, the
removed operations would have to be resurrected (or fix up index data, etc.)
when the op heads get merged.
The idea behind this patch is to split the "op log" GC into two steps:
1. recreate operations to be retained and make the old history unreachable,
2. delete unreachable operations if the head was created e.g. 3 days ago.
The latter will be run by "jj util gc". I don't think GC can be implemented
100% safe against lock-less append-only storage, and we'll probably need some
timestamp-based mechanism to not remove objects that might be referenced by
uncommitted operation.
FWIW, another nice thing about this implementation is that the index is
automatically invalidated as the op id changes. The bad thing is that the
"undo" description would contain an old op id. It seems the performance is
pretty okay.
This removes CommandError dependency from these resolution functions. We might
want to refactor the error types again if we introduce a real "opset" evaluator.
The error message for unresolved op heads now includes "@" instead of the whole
expression.
At some point, I tried `new_commit` instead of `rewrite_commit` in the split
command. That seemed to work, but messed up the dates in a subtle way.
This commit should prevents repeats of this mistake and emphasize the
importance of the author dates being preserved.
This partially reverts 6c627fb30d "cli: default to log when no subcommand is
provided." We could reject an empty alias at all, but we would still need to
ensure that the expanded alias contained a subcommand name.
The help output is a bit odd as the <COMMAND> can be omitted, but I think
that's acceptable. If we do care about that, maybe we can override_usage().
This is basically the same as Mercurial's workaround. I don't know about Git,
but arguments order is very restricted in git, so -C path can be parsed prior
to alias expansion. In hg and jj, doing that would be messy and unreliable.
Closes#2414
It should be better to handle invalid -R path globally. The error message is
a bit worse, but I think it's still okay.
This helps to load temporary config from the cwd-relative path. If the command
processing continued with an invalid -R path, the temporary config would have
to be explicitly discarded.
As far as I can see in the chat, there's no objection to changing the default,
and git.auto-local-branch = false is generally preferred.
docs/branches.md isn't updated as it would otherwise conflict with #2625. I
think the "Remotes" section will need a non-trivial rewrite.
#1136, #1862
This is really a simple change that does the following in a transaction:
* Set the new branch name to point to the same commit as the old branch name.
* Set the old branch name to point to no commit (hence deleting the old name).
Before it starts, it confirms that the new branch name is not already in use.
I originally thought this would be unavoidable, but I was wrong. "jj git clone"
doesn't implicitly create any local branch if git.auto-local-branch is off, and
that's fine because the detached HEAD state is normal in jj.
That being said, Git users would expect that the main/master branch exists.
Since importing the default branch is harmless, let's create and track it no
matter if git.auto-local-branch is off.
This tries to clarify the fact that the branches must be remote and the syntax
for specifying them as globs.
Cc @yuja, https://github.com/martinvonz/jj/pull/2625#discussion_r1423379351
Here is the result (excerpt):
```
$ jj branch track --help
Start tracking given remote branches
A tracking remote branch will be imported as a local branch of the same name. Changes to it
will propagate to the existing local branch on future pulls.
Usage: jj branch track [OPTIONS] <BRANCH@REMOTE>...
Arguments:
<BRANCH@REMOTE>...
Remote branches to track
By default, the specified name matches exactly. Use `glob:` prefix to select
branches by wildcard pattern. For details, see
https://github.com/martinvonz/jj/blob/main/docs/revsets.md#string-patterns.
Examples: branch@remote, glob:main@*, glob:jjfan-*@upstream
```
This prints a hint about using `jj new <first conflicted commit>` and
`jj squash` to resolve conflicts. The hint is printed whenever there
are new or resolved conflicts.
I hope this hint will be useful especially for new users so they know
which commit to resolve conflicts in first. It may not be obvious that
they should start with the bottommost one. I hope the hint will also
be useful for more more experienced user by letting them just copy the
printed command without first running `jj log` to find the right
commit..
When e.g. `jj rebase` results in new conflicts, it's useful for the
user to learn about that without having to run `jj log` right
after. This patch adds reporting of new conflicts created by an
operation. It also add reporting of conflicts that were resolved or
abandoned by the operation.
There was no measurable performance impact when rebasing a single
commit in the Linux kernel repo.
Before, an absolute path would be saved in the git_target file if .git is a
symlink. That's not wrong, but seemed a bit weird. Let's consolidate the
behavior across .git file types.
Apparently, libgit2 doesn't deduce "core.bare" config from the directory name,
but gitoxide implements it correctly. So we shouldn't blindly canonicalize
the Git repository path. Fortunately, the saved git_target path isn't a fully-
canonicalized form (unless user explicitly sepcified "--git-repo ./.git"), so
we don't need a hack to remap git_target back to the symlink path.
is_colocated_git_workspace() is adjusted since the git_workdir is no longer
resolved from the fully-canonicalized repo path, at least in our code. Still we
have the ".git/.." fallback because test_init_git_colocated_symlink_gitlink()
would otherwise fail. I haven't figured out why, and the test might be actually
wrong compared to the git CLI behavior, but let's not change that for now.
Fixes#2668
A git repo created by the "repo" tool doesn't have core.base set, which means
the "bare"-ness relies on the directory name. Gitoxide appears to parse it
correctly, whereas libgit2 doesn't. That's why the symlinked .git repo is no
longer processed as a colocated repo.
#2668
See comments inline for details. Cc #2600.
In particular, I wanted to make sure these behaviors are not affected by #2646.
They don't seem to be.
The tests ended up weirder than expected because of
https://github.com/martinvonz/jj/issues/2600#issuecomment-1835418824. Even
though, right now, the behavior of tests is unaffected by that issue, the
*expected* behavior is different.
Branches move around a little confusigly with `abandon`. We do want to keep
them, to test their behavior, but we can show the change id to make things
clearer.
Note that one of the new tests panics; this is a newly discovered bug.
In Git, a commit's direct parent is allowed to also be an indirect ancestor
at the same time. `jj` currently tries to prevent this situation, but does
allow it. The correctness of `rebase -r A -d descendant_of_A` currently depends
on this jj-specific behavior; we should change that.
Cc #2600
Allowing `jj init --git` in an existing Git repo creates a second Git
store in `.jj/repo/store/git`, totally disconnected from the existing
Git store. This will only produce extremely confusing bugs for users,
since any operations they make in Git will *not* be reflected in the
jj repo.
This follows up on 3967f63 (see that commit's description for more
motivation) and e79c8b6.
In a discussion linked below, it was decided that forbidding `-r --skip-empty`
entirely is preferable to the mixed behavior introduced in 3967f63.
3967f637dc (commitcomment-133539911)
If the existing git repo contains local and remote branches of the same name,
one of the remote branches is probably a tracking remote branch. Let's show
a hint how to set up tracking branches. The tracking state could be derived
from .git/config, but doing that automatically might cause another issue like
#1862, which could have been mitigated by git.auto-local-branch = false.
Repeating these is a no-op. This allows:
```shell
jj new -r a -r b # Equivalent to jj new a b
jj new --before a --before b # Equivalent to jj new a b --before
```
I keep typing the latter and getting an annoying error.
Per discussion in https://github.com/martinvonz/jj/discussions/2555. I'm
okay with either way, but it's confusing if we had "branch create" and
"branch set" and both of these could create a new branch.
Renamed `description_template_for_commit` to
`description_template_for_describe` since it's only used in
`cmd_describe`.
Renamed `description_template_for_cmd_split` to
`description_template_for_commit` and modified to accomodate empty
`intro` argument.
Fixes#2439.
As discussed in Discord, it's less useful if remote_branches() included
Git-tracking branches. Users wouldn't consider the backing Git repo as
a remote.
We could allow explicit 'remote_branches(remote=exact:"git")' query by changing
the default remote pattern to something like 'remote=~exact:"git"'. I don't
know which will be better overall, but we don't have support for negative
patterns anyway.
Summary: A natural extension of the existing support, as suggested by Scott
Olson. Closes#2496.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I91c9c8c377ad67ccde7945ed41af6c79
My gut feeling is that gitoxide aims to be more transparent than libgit2. We'll
need to know more about the underlying Git data model.
Random comments on gix API:
* gix::Repository provides API similar to git2::Repository, but has less
"convenient" functions. For example, we need to use .find_object() +
.try_to/into_<kind>() instead of .find_<kind>().
* gix::Object, Blob, etc. own raw data as bytes. gix::object and gix::objs
types provide high-level views on such data.
* Tree building is pretty low-level compared to git2.
* gix leverages bstr (i.e. bytes) extensively.
It's probably not difficult to migrate git::import/export_refs(). It might
help eliminate the startup overhead of libssl initialization. The gix-based
GitBackend appears to be a bit faster, but that wouldn't practically matter.
#2316
Like "jj log PATHS...", unmatched name isn't an error. I don't think
"jj branch list glob:'push-*'" should fail just because there are no in-flight
PR branches.
Makes sure that, at the point the commit summary for the new commit is written,
the original commit that is being rewritten is already abandoned. Otherwise,
once we show divergent change ids (in a subsequent commit) in the short commit
template, the commits would be shown as divergent.
This also has an effect on whether branches are displayed next to the commit;
the changes in test_resotre_command happen because, now, the branch is properly
propagated to the restored commit before its summary is displayed.
test_templater_alias(), test_templater_alias_override(), and
test_templater_bad_alias_decl() aren't moved since they also test config loading
and error formatting. The first test in test_templater_parse_error() is left for
the same reason. test_templater_upper_lower() depends on the commit templater.
I don't think many of the tests in test_templater.rs should use "jj log" command
as they check very specific template syntax and function behaviors. Let's move
them to in-module tests. We could add a separate test file, but we would have
to export a couple of templater macros.
test_templater_timestamp_method() is migrated as example.
Since "jj git fetch --branch" supports glob patterns, users would expect that
"jj git push --branch glob:.." also works.
The error handling bits are copied from "branch" sub commands. We might want to
extract it to a common helper function, but I haven't figured out a reasonable
boundary point yet.
AFAICT, all callers of `Merge::to_file_merge()` are already well
prepared for working with executable files. It's called from these
places:
* `local_working_copy.rs`: Materialized conflicts are correctly
updated using `Merge::with_new_file_ids()`.
* `merge_tools/`: Same as above.
* `cmd_cat()`: We already ignore the executable bit when we print
non-conflicted files, so it makes sense to also ignore it for
conflicted files.
* `git_diff_part()`: We print all conflicts with mode "100644" (the
mode for regular files). Maybe it's best to use "100755" for
conflicts that are unambiguously executable, or maybe it's better to
use a fake mode like "000000" for all conflicts. Either way, the
current behavior seems fine.
* `diff_content()`: We use the diff content in various diff
formats. We could add more detail about the executable bits in some
of them, but I think the current output is fine. For example,
instead of our current "Created conflict in my-file", we could say
"Created conflict in executable file my-file" or "Created conflict
in ambiguously executable file my-file". That's getting verbose,
though.
So, I think all we need to do is to make `Merge::to_file_merge()` not
require its inputs to be non-executable.
Closes#1279.
I'm about to make conflicts also get materialized in executable
files. We'll lose some of the test coverage in `test_chmod_command.rs`
then, because the those tests rely on the materialized content to
describe the executable bits. So this commit adds a debug command for
printing tree values and uses that in the tests.
If we add glob support, users will probably want to do something like
'jj branch untrack glob:"*@origin"'. It would be annoying if the command
failed just because one of the remote branches has already been untracked.
Since branch tracking/untracking is idempotent, it's safe to continue in
those cases.
The parse rule is lax compared to revset. We could require the pattern to be
quoted, but that would mean glob patterns have to be quoted like 'glob:"foo*"'.
I personally don't mind if "jj branch list" showed all non-tracking branches,
but I agree it would be a mess if ~500 remote branches were listed. So let's
hide them by default as non-tracking branches aren't so interesting.
Closes#1136
This will be the option to include non-tracking remote branches. We could add
more fine-grained filtering flags, but I think --all is good enough and easier
to remember.
This patch also updates many of the test outputs to include synchronized remote
branches. I think verbose outputs will help catch future bugs.
This replaces our existing mechanism of adding `/.jj/` to
`.git/info/exclude` by adding `*` to `.jj/.gitignore`, as suggested by
@ppwwyyxx. That simplifies the code quite a bit, and it avoids the
problem with `.git/info/exclude` not existing (it apparently doesn't
exist when the user uses
https://git-scm.com/docs/git-init#_template_directory).
Closes#2385.
We can provide more actionable error message than "not fast-forwardable". If
the push was fast-forwardable, "jj branch track" should be able to merge the
remote branch without conflicts, so the added step would be minimal.
Although this is logically correct, the error message is a bit cryptic. It's
probably better to reject push if non-tracking remote branches exist.
#1136
This means that the commits previously pinned by remote branches are no longer
abandoned. I think that's more correct since "push" is the operation to
propagate local view to remote, and uninteresting commits should have been
locally abandoned.
Since I'm going to make git::push_branches() update the repo view internally,
it should fail fast if the remote name is reserved. Before, the problem was
detected on git::import_refs().
This patch adds MutableRepo::track_remote_branch() as we'll probably need to
track the default branch on "jj git clone". untrack_remote_branch() is also
added for consistency.
I'm not sure if this is the best way to render non-tracking branches, but
it helps to write CLI tests. Maybe we can add some hint or decoration to
non-tracking branches, but I'd like to avoid bikeshedding at this point.
Since we haven't migrated the push function yet, a deleted branch can be
pushed to non-tracking remotes. This will be addressed later.
#1136
Summary: Yuya's changes and mine had a semantic conflict ("merge skew") between
the two of them, as b7c7b19e changed the `op log `output slightly, whereas
220292ad included a new test that used `op log` itself.
Generated by `cargo insta review`.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I51d4de7316b1abc09be4f9fa0dd0d1a1
We could fix do_git_clone() instead, but it seemed a bit weird that the
git_repo_path is relative to the store path which is unknown to callers.
Fixes#2374
There's a subtle behavior change. Unlike the original remove_remote_branch(),
remote_views entry is not discarded when the branches map becomes empty. The
reasoning here is that the remote view can be added/removed when the remote
is added/removed respectively, though that's not implemented yet. Since the
serialized data cannot represent an empty remote, such view may generate
non-unique content hash.
Summary: This allows `workspace forget` to forget multiple workspaces in a
single action; it now behaves more consistently with other verbs like `abandon`
which can take multiple revisions at one time.
There's some hoop-jumping involved to ensure the oplog transaction description
looks nice, but as they say: small conveniences cost a lot.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Id91da269f87b145010c870b7dc043748
Summary: Workspaces are most useful to test different versions (commits) of
the tree within the same repository, but in many cases you want to check out a
specific commit within a workspace.
Make that trivial with a `--revision` option which will be used as the basis
for the new workspace. If no `-r` option is given, then the previous behavior
applies: the workspace is created with a working copy commit created on top of
the current working copy commit's parent.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I23549efe29bc23fb9f75437b6023c237
Before this patch, it was an error to run `jj config set --user foo
'[1]'` twice. But it's only been broken since the previous commit
because '[1]' was interpreted as a string before then.
Now we have a separate map for "git" tracking remote, we can always preserve
the last imported/exported git_refs. The option to restore git-tracking refs
has been removed. Perhaps, --what can be reorganized as --local and --remote
<NAME>.
Before this patch, when updating to a commit that has a file that's
currently an ignored file on disk, jj would crash. After this patch,
we instead leave the conflicting files or directories on disk. We
print a helpful message about how to inspect the differences between
the intended working copy and the actual working copy, and how to
discard the unintended changes.
Closes#976.
On my Debian laptop, openssl_init() takes ~30ms to load the default CA
certificates serialized in PEM format, and the cost is added to each jj
invocation. This change saves 20s (of 50s) on my machine.
% wc -l /usr/lib/ssl/cert.pem
3517 /usr/lib/ssl/cert.pem
I've added a boolean flag to the store to ensure that the migration never runs
more than once after the view gets "op restore"-d. I'll probably reorganize the
branches structure to support non-tracking branches later, but updating the
storage format in a single commit would be too involved.
If jj is downgraded, these "git" remote refs would be exported to the Git repo.
Users might have to remove them manually.
I have used the tree-level conflict format for several weeks without
problem (after the fix in 51b5d168ae). Now - right after the 0.10.0
release - seems like a good time to enable the config by default.
I enabled the config in our default configs in the CLI crate to reduce
impact on tests (compared to changing the default in `settings.rs`).
As we can set HEAD to an arbitrary ref by using .reference_symbolic(), we don't
have to manage a ref that can also be valid as a branch name.
Fixes#1495
Apparently, it gets too verbose if the remote history is actively rewritten.
Let's summarize the output for now. The plan is to show the list of moved refs
instead of the full list of abandoned commits.
The problem is that the first non-working-copy commit moves the unborn current
branch to that commit, but jj doesn't "export" the moved branch. Therefore,
the next jj invocation notices the "external" ref change, which was actually
made by jj.
I'm not sure why we play nice by setting the "current" HEAD, but I *think* it's
okay to set the "new" HEAD and reset to the same commit to clear Git index.
This will probably help to understand why you've got conflicts after fetching.
Maybe we can also report changed local refs.
I think the stats should be redirected to stderr, but we have many other similar
messages printed to stdout. I'll probably fix them all at once later.
I think most users who change the set of immutable heads away from
`trunk() | tags()` are going to also want to change the default log
revset to include the newly mutable commit and to exclude the newly
immutable commits. So let's update the default log revset to use
`immutable_heads()` instead.
`test_templater` changed because we have overridden the set of
immutable commits there so `jj log` now includes the remote branch.
This adds a new `revset-aliases.immutable_heads()s` config for
defining the set of immutable commits. The set is defined as the
configured revset, as well as its ancestors, and the root commit
commit (even if the configured set is empty).
This patch also adds enforcement of the config where we already had
checks preventing rewrite of the root commit. The working-copy commit
is implicitly assumed to be writable in most cases. Specifically, we
won't prevent amending the working copy even if the user includes it
in the config but we do prevent `jj edit @` in that case. That seems
good enough to me. Maybe we should emit a warning when the working
copy is in the set of immutable commits.
Maybe we should add support for something more like [Mercurial's
phases](https://wiki.mercurial-scm.org/Phases), which is propagated on
push and pull. There's already some affordance for that in the view
object's `public_heads` field. However, this is simpler, especially
since we can't propagate the phase to Git remotes, and seems like a
good start. Also, it lets you say that commits authored by other users
are immutable, for example.
For now, the functionality is in the CLI library. I'm not sure if we
want to move it into the library crate. I'm leaning towards letting
library users do whatever they want without being restricted by
immutable commits. I do think we should move the functionality into a
future `ui-lib` or `ui-util` crate. That crate would have most of the
functionality in the current `cli_util` module (but in a
non-CLI-specific form).
I'm going to make this function check against a configurable revset
indicating immutable commits. It's more efficient to do that by
evaluating the revset only once.
We may want to have a version of the function where we pass in an
unevaluated revset expression. That would allow us to error out if the
user accidentally tries to rebase a large set of commits, without
having to evaluate the whole set first.
Once we add support for immutable commits, `jj duplicate` should be
allowed to create duplicate of them. The reason it can't duplicate the
root commit is that it would mean there would be multiple root
commits, which would break the invariant that the single root commit
is the only root commit (and the backends refuse to write a commit
without parents). So let's have `jj duplicate` check specifically that
the user doesn't try to duplicate the root commit instead.
Since we have overloaded operator symbols, we need to deduplicate them
upfront. Legacy and compat operators are also removed from the suggestion.
It's a bit ugly to mutate the error struct before calling Error::renamed_rule(),
but I think it's still better than reimplementing message formatting function.
As we discussed in #1928, it seems better to print information about
abandoned commits in the context of the pre-abandon state. For
example, that means that we'll include any branches that pointed to
the now-abandoned commits.
This is a naive implementation, which cannot deal with multiple children
or parents stemming from merges.
Note: I gave each command separate a separate argument struct
for extensibility.
Fixes#878
Suppose "x::y" is the operator that defaults to "root()::visible_heads()"
respectively, "::" is identical to "all()". Since we've just changed the
behavior of "..y", ".." is now "root()..visible_heads()" meaning "~root()".
In `LockedWorkingCopy::drop()`, we panic if the caller had not called
`finish()`. IIRC, the idea was both to find bugs where we forgot to
call `finish()` and to prevent continuing with a modified
`WorkingCopy` instance. I don't think the former has been a problem in
practice. It has been a problem in practice to call `discard()` to
avoid the panic, though. To address that, we can make the `Drop`
implementation discard the changes (forcing a reload of the state if
the working copy is accessed again).
I also converted the error from `InternalError` to `UserError`. So far
I've intented to use `InternalError` only to indicate bugs or corrupt
repos. I'm not sure that's a good idea, and we can revisit it later.
If the path is too long to fit on the screen, this patch makes it so
we elide the first part of it. It goes a bit further and trims it down
to ~70% of the screen, giving some room for the stat. This seems
somewhat similar to what Git does.
`insta` ignores leading indentation (as long as it's consistent within
the snapshot), but when a test case fails and you let `cargo insta`
update it, it's going to use a specific indentation. There were a few
tests that didn't match that indentation, which could lead to
surprising diffs if the tests fail at some point.
This shows that there's too much padding because we pad based on
number of bytes.
I had to reduce the path names for the file names not to get too long
for my file system.
We can still crash on terminals that are less than 4 characters wide
(maybe it doesn't matter if we do because the user can't tell the
crash report from a diffstat in such a terminal?). This patch fixes
the crash.
We would run into a panic due to "attempt to subtract with overflow"
if the path was long. This patch fixes that and adds tests showing the
current behavior when there are long paths and/or large diffs.
When we start writing tree-level conflicts in an existing repo, we
don't want commits that change the format to be non-empty if they
don't change any content. This patch updates `MergeTreeId::eq()` to
consider two resolved trees equal even if only their `MergedTreeId`
variant is different (one is path-level and one is tree-level).
I think I've gone through all places we compare tree ids and checked
that it's safe to compare them this way. One consequence is that
rebasing a commit without changing the parents (typically
auto-rebasing after `jj describe`) will not lead to the tree id
getting upgraded, due to an optimization we have for that case. I
don't think that's serious enough to handle specially; we'll have to
support the old format for existing repos for a while regardless of a
few commits not getting upgraded right away.
The number of failing tests with the config option enabled drop from
108 to 11 with this patch.
We're finally ready to start writing trees using the new format where
we represent conflicts by having multiple trees in the commit instead
of having a single tree with multiple entries at a path. This patch
adds a config option for that. It's not ready to be used yet, so I
haven't updated the release notes or other documentation.
I added only a simple CLI test for testing what happens when the
config is enabled in an existing repo. 108 tests currently fail if we
flip the default.
With the idea that less severe placeholders (like description) could
(and should) explicitly "opt out".
(Both email and name placeholders will be red with this change.)
I made it simply fail on explicit fetch/import, and ignored on implicit import.
Since the error mode is predictable and less likely to occur. I don't think it
makes sense to implement warning propagation just for this.
Closes#1690.
This switches the whole `diff_util` module to working with
`MergedTree`, `Merge<Option<TreeValue>>` etc., so it can support
tree-level conflicts.
Since we want to avoid using `ConflictId`s, I switched the hash we use
for conflicts in `--git` style diffs to use an all-'0' id instead of
using the conflict id.
This patch also extracts format_detailed_signature() function to deduplicate
the "show" template bits.
The added placeholder templates aren't labeled as "empty". If needed, I think
the whole template can be labeled as "empty" (or "empty_commit") just like
"working_copy".
Closes#2112
I think this is less surprising than falling back to the default length.
i64-to-usize conversion can also overflow on 32 bit environment, but I'm not
bothered to handle overflow scenario.
This allows negative numbers, which also means functions which took numbers can now take negative numbers
Luckily, they all already handled this exactly as expected.
