When you use e.g. `git switch` to check out a conflicted commit,
you're going to end up with the `.jjconflicts-*` directories in your
working copy. It's probably not obvious what those mean. This patch
adds a README file to the root tree to try to explain to users what's
going on and how to recover.
The authoritative information about conflicts is stored in the
`jj:trees` commit header. The contents of conflicted commits is only
used for preventing GC. We can therefore add contents to the tree
without much consequence.
I will be updating `rebase -r` to avoid simplifying ancestor merges in a
subsequent commit, which will cause existing tests to fail for the Git
backend due to ancestor merges with the root commit.
I'm not sure if this was an intentional omission, but I think it would be
useful to have `-e` as a short flag for `--edit`. I don't usually edit commits,
but I do use `prev` and `next` with edit to navigate to a commit that I want to
squash. Often this is easier than typing `--from` and `--into` plus the change
IDs.
If people want to edit commits we shouldn't stand in their way.
This is following on the rewrite for `parallelize`.
- https://github.com/martinvonz/jj/pull/3521
Since rebase_descendants from rebase.rs is no longer used outside of that file,
it can be made private again.
In a future commit these tests will run with both `jj commit` and `jj new` since
both will have the same semantics for advancing the branch pointer.
Parameterizing the tests allows us to run both variants without duplicating the
test bodies. Since the commit IDs are different when `jj describe` + `jj new`
is used instead of `jj commit`, this commit also drops the commit IDs from the
test snapshots. This is fine because the commit IDs are not important for these
tests.
## Feature Description
If enabled in the user or repository settings, the local branches pointing to the
parents of the revision targeted by `jj commit` will be advanced to the newly
created commit. Support for `jj new` will be added in a future change.
This behavior can be enabled by default for all branches by setting
the following in the config.toml:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
```
Specific branches can also be disabled:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
disabled-branches = ["main"]
```
Branches that match a disabled pattern will not be advanced, even if they also
match an enabled pattern.
This implements feature request #2338.
This one just tests with a larger value and a human-readable string (10KB).
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: If9e5d62146b369d3a1b7efe4e56a1b6b4338c720
For new users this results in a significantly better error output, that
actually shows them how to solve the problem, and why it happened.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ide0c86fdfb40d66f970ceaef7b60a71392d2cd4b
Previously, this command would work:
jj --config-toml='snapshot.max-new-file-size="1"' st
And is equivalent to this:
jj --config-toml='snapshot.max-new-file-size="1B"' st
But this would not work, despite looking like it should:
jj --config-toml='snapshot.max-new-file-size=1' st
This is extremely confusing for users.
This config value is deserialized via serde; and while the `HumanByteSize`
struct allegedly implemented Serde's `visit_u64` method, it was not called by
the deserialize visitor. Strangely, adding an `visit_i64` method *did* work, but
then requires handling of overflow, etc. This is likely because TOML integers
are naturally specified in `i64`.
Instead, just don't bother with any of that; implement a `TryFrom<String>`
instance for `HumanByteSize` that uses `u64::from_str` to try parsing the string
immediately; *then* fall back to `parse_human_byte_size` if that doesn't work.
This not only fixes the behavior but, IMO, is much simpler to reason about; we
get our `Deserialize` instance for free from the `TryFrom` instance.
Finally, this adjusts the test for `max-new-file-size` to now use a raw integer
literal, to ensure it doesn't regress. (There are already in-crate tests for
parsing the human readable strings.)
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I8dafa2358d039ad1c07e9a512c1d10fed5845738
I'm going to make some `jj parallelize` cases that currently error out
instead be successful. Some of the will result in ancestor merges with
the root commit. This patch updates those tests to avoid that.
`jj parallelize` was a good example of a command that can be
simplified by the new API, so I decided to rewrite it as an example.
The rewritten version is more flexible and doesn't actually need the
restrictions from the old version (such as checking that the commits
are connected). I still left the check for now to keep this patch
somewhat small. A subsequent commit will remove the restrictions.
It was removed at 522025e091 "log: remove unused and inconsistent `log`
label", but obslog had the same inconsistency. Since it's now easy to label
the template output, let's re-add the "log" label.
The change in test_templater_upper_lower() is noop. Formatter no longer
emits reset sequence in the middle because the template is still labeled.
Mercurial appears to resolve cwd-relative path first, so "glob:*.c" could be
parsed as "**/*.c" if cwd was literally "**". It wouldn't practically matter,
but isn't correct. Instead, jj's parser first splits glob into literal part
and pattern. That's mainly because we want to parse the user input texts into
type-safe objects, and (RepoPathBuf, glob::Pattern) pairs are the simplest
ones. The current parser can't handle patterns like "foo/*/.." (= "foo" ?),
and errors out. I believe this restriction is acceptable.
Unlike literal paths, the 'glob:' pattern anchors to the whole file path. I
don't think "prefix"-matching glob is useful, and making it the default would
be rather confusing.
This is the last non-debug command that doesn't support file patterns. It
wouldn't make much sense to "cat" multiple files (despite the command name),
but doing that should be harmless.
Prepares for migrating to the matcher API. "Path exists but is not a file"
error is turned into a warning because the loop shouldn't terminate there.
"No such path" error message is also updated for consistency.
if `--use-destination-message/-u` is passed to `jj squash`, the resulting
revision will use the description of the destination revision and the
description(s) of the source revision(s) will be discarded.
If this doesn't work out, maybe we can try one of these:
a. fall back to bare file name if expression doesn't contain any operator-like
characters (e.g. "f(x" is an error, but "f x" can be parsed as bare string)
b. introduce command-line flag to opt in (e.g. -e FILESET)
c. introduce pattern prefix to opt in (e.g. set:FILESET)
Closes#3239, #2915, #2286
This is the same as the `test_split_siblings_with_merge_child` added in
https://github.com/martinvonz/jj/pull/3485, but without the siblings flag. I
forgot to add the non-siblings version in that PR.
#3485
Ilya reported this in https://github.com/martinvonz/jj/issues/3483.
The bug was introduced in 976320726d.
Before this fix, `jj split` dropped any parents what weren't involved in the
split when it rebased the children of the commit being split. This meant that
any children which were merge commits lost their other parents unintentionally.
Fixes#3483
Maybe we can optimize it to check paths during diffing, but I think it's okay
to add extra lookup cost at the end. The size of the path arguments is usually
small.
Closes#505
Path parsing will be migrated to parse_union_filesets(), but I haven't decided
how we'll go forward:
a. migrate everything to fileset
b. require flag like "-e FILESET" (note -p conflicts with log -p)
c. require flag like "-e FILESET" and deprecate positional PATHs #2554
d. require prefix like "set:FILESET" (not consistent with -r REVSET)
I'm currently dogfooding (a). It works for me, but I don't use exotic file
names that would require quoting in zsh.
#3239
Before this commit `jj prev` fails if the current working copy commit is a
merge commit. After this commit it will prompt the user to choose the ancestor
they want to select.
#2126
This commit adds commit graphs to most of the tests for `jj prev` to make it
clearer where `@` points before and after `prev` is run.
In addition, there were a couple of tests where the comments suggested the test
meant to have `@` pointing to a specific commit, but it actually pointed to an
empty child of that commit.
This sort of issue also exists in `test_prev_editing`. The test is supposed to
check that `--edit` is implied if you run `jj prev` on an interior commit, but
it actually caused a new empty commit to be created since `@` was sitting on a
tip commit.
This will hopefully make it clear that `jj prev` does not
move by [OFFSET] relative to `@`, which is a misconception
that I had and I think others may also have.
I am suggesting this change as a result of the vigorous discussion in
these two issues:
- https://github.com/martinvonz/jj/issues/3426
- https://github.com/martinvonz/jj/pull/3445
We should make similar changes to `jj next` as well since
it follows similar rules.
This is basically the same as string kind:pattern syntax in CLI. This will
hopefully be superseded by filesets, but I'm not sure if that will work out.
A file name is more likely to contain whitespaces, which will have to be
quoted as '"Documents and Settings"'.
There are no more callers of parse_function_argument_to_string(), so it's
removed. This function was a thin wrapper of literal parser, and can be
easily reintroduced if needed.
Parallelize revisions by making them siblings
Running `jj parallelize 1::2` will transform the history like this:
```text
3
| 3
2 / \
| -> 1 2
1 \ /
| 0
0
```
Each of the target revisions is rebased onto the parents of the root(s) of
the target revset (not to be confused with the repo root). The children of
the head(s) of the target revset are rebased onto the target revisions.
The target revset is the union of the REVISIONS arguments.
The target revset being parallelized must satisfy several conditions,
otherwise the command will fail.
1. The heads of the target revset must not have different children.
2. The roots of the target revset must not have different parents.
3. The parents of all target revisions except the roots must also be
parallelized. This means that the target revisions must be connected.
This lets users use "large" revsets in commands such as `jj rebase`, without
needing the `all:` modifier.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ica80927324f3d634413d3cc79fbc73057ccefd8a
Offset is a more descriptive noun for this argument. This commit also tweaks
the help message for the argument.
This isn't an option/flag, so this change should be transparent to users.
Like -r/--revisions, it should be okay to filter synced/non-tracking remote
branches by name.
conflicts_with_all = "tracked" is redundant, so removed as well. The tracked
field declares that it conflicts with --all-remotes.
Since "all:" implies that the user doesn't care about the order of the
revisions within that argument, it should be okay if two "all:" sets overlapped.
When a commit is split, any branches pointing to it are moved to the second
commit created by the split. This is true even if the --siblings option is
used.
#3419
If the --siblings option is used, the target commit is split into two sibling
commits instead of parent and child commits. Any children of the original
commit will have both siblings as their new parents.
#2274
Note that `jj resolve` already had its own `--quiet` flag. The output
with `--quiet` for that command got a lot quieter with the global
`--quiet` also taking effect. That seems reasonable to me.
Templater doesn't have the one yet, but I think it belongs to the same
category.
For clap::Error, we could use clap's own mechanism to render suggestions as
"tip: ...", but I feel "Hint: ..." looks better because our error/hint message
is capitalized.
One less CLI revset helper. It might look odd that "jj rebase" says "Merge
failed" whereas "jj new" doesn't, but that depends on where the BackendError
is detected.
Commands like `new`, `duplicate`, and `abandon` can take multiple revset
arguments which results in their collective union. They take the revisions
directly as arguments. But for consistency with many other commands, they can
also take the `-r` argument, which is a no-op. However, due to the flag being
specified as a `bool`, the `-r` option can only be specified once, so e.g.
`abandon -r x -r y` often fails. I normally use `-r` for consistency and muscle
memory, so this bites me often.
Instead, use `clap::ArgAction::Count` in order to allow `-r` to be specified
multiple times. It remains unused, of course.
With this change, all the following invocations are equivalent. Before this
change, the second example would fail due to giving `-r` multiple times.
jj abandon x y
jj abandon -r x -r y
jj abandon -r 'x | y'
Note: `jj new` already supported this exact case actually, but it used an
awkward trick where it used `.overrides_with()` in order to override *itself* so
it could be specified multiple times. I believe this is a bit clearer.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ib36cf81d46dae4f698f06d0a32e8fd3120bfb4a4
This makes the summary line more informative. Even though it just duplicates
the message printed later, I think it's easier to follow.
This patch also adjusts some RevsetParseError messages because it seemed
redundant to repeat "revset function", "argument", etc.
Because the CLI error handler now prints error sources in multi-line format,
it doesn't make much sense to render Revset/TemplateParseError differently.
This patch also fixes the source() of the SyntaxError kind. It should be
self.pest_error.source() (= None), not self.pest_error.
Highlighting "{n}: " will help to follow error sources containing multi-line
messages. I'm going to make revset/template alias errors be formatted as plain
error chain.
It's inconsistent that some warnings have headings and some don't, and it seems
the choice is arbitrary. Let's unify the style. There are two exceptions:
1. continued line following labeled message,
2. "unrecognized response" followed by prompt.
The lowercase "warning: " is unified to "Warning: " as it is the jj's
convention afaik.
The _default() suffix could be dropped from these methods, but it's probably
better to break the existing codebase for the moment. Otherwise, the caller
might do writeln!(ui.warning(), "Warning: ..").
The existing .hint() method is renamed to .hint_no_heading() to clarify that
it's not the default choice to print a hint. I'll add .hint_default() later,
which will be the shorthand for .hint_with_heading("Hint: ").
This fixes --change/--branch conflicts by making --change precede --branch. I
don't think this is the most obvious behavior, but it's the easiest workaround.
It could be moved before set_local_branch_target() to not update the local
branch, but it seemed weird that --change is silently ignored. This
inconsistency will be addressed later.
I'm going to reorganize CommandError as (kind, err, hints) tuple so that we
can add_hint() to the constructed error object.
Some config error messages are slightly adjusted because the inner error is
now printed in separate line.
As requested in #1471, I added a new flag for `jj branch list` to only show branches that are conflicted.
Adds a unit test to check for listing only conflicted branches and regenerates the cli output to incorporate the new flag.
Closes#1471
reformat
Apart from (IMO) looking nicer, this will also sidestep the potential problem
that if the file contains actual jj conflict markers (`>>>>>>>` in the beginning
of a line, for example), jj would currently have trouble materializing and
subsequently parsing conflicts in the file if it actually became conflicted.
I'll demo this bug in either this or a subsequent PR. It's the kind of bug that
sounds serious in theory but might never cause a problem in practice.
After this PR, only `docs/tutorial.md` has a conflict marker that's not indented.
There's only one there, so hopefully it won't be too much of a pain to deal with.
I also indented other strings in `test_conflicts.rs`. IMO, this looks nice and
more consistent with the `insta::assert_snapshot` output. I didn't spend the
time to do the same for `test_resolve_command`.
As discussed in #2900, the milliseconds are rarely useful, and it can
be confusing with different timezones because it makes harder to
compare timestamps.
I added an environment variable to control the timestamp in a
cross-platform way. I didn't document because it exists only for tests
(like `JJ_RANDOMNESS_SEED`).
Closes#2900
