This commit is contained in:
Roland McGrath 1995-03-07 23:44:43 +00:00
parent 636435e5c2
commit ce40d6af9f
10 changed files with 12410 additions and 0 deletions

15
.cvsignore Normal file
View file

@ -0,0 +1,15 @@
*.gz *.Z *.tar *.tgz
=*
TODO COPYING*
make-3* make-test*
*.info *.info-*
stamp-*
makebook*
*.dep *.dvi *.toc *.aux
*.cp *.cps *.fn *.fns *.vr *.vrs *.tp *.tps *.ky *.kys *.pg *.pgs
sun4 i386 i386-netbsd hp300-netbsd hp300 rs6000 sun3 news800 amiga
hp700 hp834
customs

8117
ChangeLog Normal file

File diff suppressed because it is too large Load diff

307
Makefile.in Normal file
View file

@ -0,0 +1,307 @@
# NOTE: If you have no `make' program at all to process this makefile, run
# `build.sh' instead.
#
# Copyright (C) 1988, 89, 91, 92, 93, 94, 1995 Free Software Foundation, Inc.
# This file is part of GNU Make.
#
# GNU Make is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# GNU Make is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU Make; see the file COPYING. If not, write to
# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
#
# Makefile for GNU Make
#
# Ultrix 2.2 make doesn't expand the value of VPATH.
VPATH = @srcdir@
# This must repeat the value, because configure will remove `VPATH = .'.
srcdir = @srcdir@
CC = @CC@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
# Define these for your system as follows:
# -DNO_ARCHIVES To disable `ar' archive support.
# -DNO_FLOAT To avoid using floating-point numbers.
# -DENUM_BITFIELDS If the compiler isn't GCC but groks enum foo:2.
# Some compilers apparently accept this
# without complaint but produce losing code,
# so beware.
# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
# See also `config.h'.
defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"
# Which flavor of remote job execution support to use.
# The code is found in `remote-$(REMOTE).c'.
REMOTE = @REMOTE@
# If you are using the GNU C library, or have the GNU getopt functions in
# your C library, you can comment these out.
GETOPT = getopt.o getopt1.o
GETOPT_SRC = $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h
# If you are using the GNU C library, or have the GNU glob functions in
# your C library, you can comment this out. GNU make uses special hooks
# into the glob functions to be more efficient (by using make's directory
# cache for globbing), so you must use the GNU functions even if your
# system's C library has the 1003.2 glob functions already. Also, the glob
# functions in the AIX and HPUX C libraries are said to be buggy.
GLOB = glob/libglob.a
# If your system doesn't have alloca, or the one provided is bad, define this.
ALLOCA = @ALLOCA@
ALLOCA_SRC = $(srcdir)/alloca.c
# If your system needs extra libraries loaded in, define them here.
# System V probably need -lPW for alloca. HP-UX 7.0's alloca in
# libPW.a is broken on HP9000s300 and HP9000s400 machines. Use
# alloca.c instead on those machines.
LOADLIBES = @LIBS@
# Any extra object files your system needs.
extras = @LIBOBJS@
# Common prefix for machine-independent installed files.
prefix = @prefix@
# Common prefix for machine-dependent installed files.
exec_prefix = @exec_prefix@
# Directory to install `make' in.
bindir = $(exec_prefix)/bin
# Directory to find libraries in for `-lXXX'.
libdir = $(exec_prefix)/lib
# Directory to search by default for included makefiles.
includedir = $(prefix)/include
# Directory to install the Info files in.
infodir = $(prefix)/info
# Directory to install the man page in.
mandir = $(prefix)/man/man$(manext)
# Number to put on the man page filename.
manext = 1
# Prefix to put on installed `make' binary file name.
binprefix =
# Prefix to put on installed `make' man page file name.
manprefix = $(binprefix)
# Whether or not make needs to be installed setgid.
# The value should be either `true' or `false'.
# On many systems, the getloadavg function (used to implement the `-l'
# switch) will not work unless make is installed setgid kmem.
install_setgid = @NEED_SETGID@
# Install make setgid to this group so it can read /dev/kmem.
group = @KMEM_GROUP@
# Program to install `make'.
INSTALL_PROGRAM = @INSTALL_PROGRAM@
# Program to install the man page.
INSTALL_DATA = @INSTALL_DATA@
# Generic install program.
INSTALL = @INSTALL@
# Program to format Texinfo source into Info files.
MAKEINFO = makeinfo
# Program to format Texinfo source into DVI files.
TEXI2DVI = texi2dvi
# Programs to make tags files.
ETAGS = etags -w
CTAGS = ctags -w
objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o \
rule.o implicit.o default.o variable.o expand.o function.o \
vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o \
$(GLOB) $(GETOPT) $(ALLOCA) $(extras)
srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c \
$(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c \
$(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c \
$(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c \
$(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c \
$(srcdir)/vpath.c $(srcdir)/version.c \
$(srcdir)/remote-$(REMOTE).c \
$(srcdir)/ar.c $(srcdir)/arscan.c \
$(srcdir)/signame.c $(srcdir)/signame.h $(GETOPT_SRC) \
$(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/file.h \
$(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h \
$(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in
.SUFFIXES:
.SUFFIXES: .o .c .h .ps .dvi .info .texinfo
all: make
info: make.info
dvi: make.dvi
# Some makes apparently use .PHONY as the default goal if it is before `all'.
.PHONY: all check info dvi
make.info: make.texinfo
$(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info
make.dvi: make.texinfo
$(TEXI2DVI) $(srcdir)/make.texinfo
make.ps: make.dvi
dvi2ps make.dvi > make.ps
make: $(objs)
$(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new
mv -f make.new make
# -I. is needed to find config.h in the build directory.
.c.o:
$(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \
$(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
# For some losing Unix makes.
SHELL = /bin/sh
@SET_MAKE@
glob/libglob.a: FORCE config.h
cd glob; $(MAKE) libglob.a
FORCE:
tagsrcs = $(srcs) $(srcdir)/remote-*.c
TAGS: $(tagsrcs)
$(ETAGS) $(tagsrcs)
tags: $(tagsrcs)
$(CTAGS) $(tagsrcs)
.PHONY: install installdirs
install: installdirs \
$(bindir)/$(binprefix)make $(infodir)/make.info \
$(mandir)/$(manprefix)make.$(manext)
installdirs:
$(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir)
$(bindir)/$(binprefix)make: make
$(INSTALL_PROGRAM) make $@.new
@if $(install_setgid); then \
if chgrp $(group) $@.new && chmod g+s $@.new; then \
echo "chgrp $(group) $@.new && chmod g+s $@.new"; \
else \
echo "$@ needs to be owned by group $(group) and setgid;"; \
echo "otherwise the \`-l' option will probably not work."; \
echo "You may need special privileges to install $@."; \
fi; \
else true; fi
# Some systems can't deal with renaming onto a running binary.
-rm -f $@.old
-mv $@ $@.old
mv $@.new $@
$(infodir)/make.info: make.info
if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
for file in $${dir}/make.info*; do \
name="`basename $$file`"; \
$(INSTALL_DATA) $$file \
`echo $@ | sed "s,make.info\$$,$$name,"`; \
done
# Run install-info only if it exists.
# Use `if' instead of just prepending `-' to the
# line so we notice real errors from install-info.
# We use `$(SHELL) -c' because some shells do not
# fail gracefully when there is an unknown command.
if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
install-info --infodir=$(infodir) $$dir/make.info; \
else true; fi
$(mandir)/$(manprefix)make.$(manext): make.man
$(INSTALL_DATA) $(srcdir)/make.man $@
loadavg: loadavg.c config.h
$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
loadavg.c $(LOADLIBES) -o $@
# We copy getloadavg.c into a different file rather than compiling it
# directly because some compilers clobber getloadavg.o in the process.
loadavg.c: getloadavg.c
ln $(srcdir)/getloadavg.c loadavg.c || \
cp $(srcdir)/getloadavg.c loadavg.c
check-loadavg: loadavg
@echo The system uptime program believes the load average to be:
-uptime
@echo The GNU load average checking code believes:
./loadavg
check: check-loadavg
.PHONY: clean realclean distclean mostlyclean
clean: glob-clean
-rm -f make loadavg *.o core make.dvi
distclean: clean glob-realclean
-rm -f Makefile config.h config.status build.sh stamp-config
-rm -f config.log config.cache
-rm -f TAGS tags
-rm -f make.?? make.??s make.log make.toc make.*aux
-rm -f loadavg.c
realclean: distclean
-rm -f make.info*
mostlyclean: clean
.PHONY: glob-clean glob-realclean
glob-clean glob-realclean:
cd glob; $(MAKE) $@
Makefile: config.status $(srcdir)/Makefile.in
$(SHELL) config.status
glob/Makefile: config.status $(srcdir)/glob/Makefile.in
$(SHELL) config.status
config.h: stamp-config ;
stamp-config: config.status $(srcdir)/config.h.in
$(SHELL) config.status
touch stamp-config
# These rules cause too much trouble.
#configure: configure.in
# autoconf $(ACFLAGS)
#config.h.in: configure.in
# autoheader $(ACFLAGS)
# This tells versions [3.59,3.63) of GNU make not to export all variables.
.NOEXPORT:
# The automatically generated dependencies below may omit config.h
# because it is included with ``#include <config.h>'' rather than
# ``#include "config.h"''. So we add the explicit dependency to make sure.
$(objs): config.h
# Automatically generated dependencies will be put at the end of the file.
# Automatically generated dependencies.
commands.o : commands.c make.h dep.h commands.h file.h variable.h job.h
job.o: job.c make.h commands.h job.h file.h variable.h
dir.o: dir.c make.h
file.o : file.c make.h commands.h dep.h file.h variable.h
misc.o: misc.c make.h dep.h
main.o: main.c make.h commands.h dep.h file.h variable.h job.h getopt.h
read.o: read.c make.h commands.h dep.h file.h variable.h glob/glob.h
remake.o: remake.c make.h commands.h job.h dep.h file.h
rule.o : rule.c make.h config.h commands.h dep.h file.h variable.h rule.h
implicit.o : implicit.c make.h rule.h dep.h file.h
default.o: default.c make.h rule.h dep.h file.h commands.h variable.h
variable.o : variable.c make.h commands.h variable.h dep.h file.h
expand.o: expand.c make.h commands.h file.h variable.h
function.o : function.c make.h variable.h dep.h commands.h job.h
vpath.o : vpath.c make.h file.h variable.h
version.o: version.c
ar.o : ar.c make.h file.h dep.h
arscan.o: arscan.c make.h
signame.o: signame.c signame.h
remote-stub.o : remote-stub.c make.h commands.h
getopt.o: getopt.c getopt.h
getopt1.o : getopt1.c getopt.h
getloadavg.o: getloadavg.c

557
NEWS Normal file
View file

@ -0,0 +1,557 @@
GNU make NEWS -- history of user-visible changes. 26 January 1995
Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
See the end for copying conditions.
Please send GNU make bug reports to bug-gnu-utils@prep.ai.mit.edu.
Version 3.73
* Converted to use Autoconf version 2, so `configure' has some new options.
See INSTALL for details.
* You can now send a SIGUSR1 signal to Make to toggle printing of debugging
output enable by -d, at any time during the run.
Version 3.72
* DJ Delorie has ported Make to MS-DOS using the GO32 extender.
He is maintaining the DOS port, not the GNU Make maintainer;
please direct bugs and questions for DOS to <djgpp@sun.soe.clarkson.edu>.
MS-DOS binaries are available for FTP from oak.oakland.edu:pub/msdos/djgpp.
* The `MAKEFLAGS' variable (in the environment or in a makefile) can now
contain variable definitions itself; these are treated just like
command-line variable definitions. Make will automatically insert any
variable definitions from the environment value of `MAKEFLAGS' or from
the command line, into the `MAKEFLAGS' value exported to children. The
`MAKEOVERRIDES' variable previously included in the value of `$(MAKE)'
for sub-makes is now included in `MAKEFLAGS' instead. As before, you can
reset `MAKEOVERRIDES' in your makefile to avoid putting all the variables
in the environment when its size is limited.
* If `.DELETE_ON_ERROR' appears as a target, Make will delete the target of
a rule if it has changed when its commands exit with a nonzero status,
just as when the commands get a signal.
* The automatic variable `$+' is new. It lists all the dependencies like
`$^', but preserves duplicates listed in the makefile. This is useful
for linking rules, where library files sometimes need to be listed twice
in the link order.
* You can now specify the `.IGNORE' and `.SILENT' special targets with
dependencies to limit their effects to those files. If a file appears as
a dependency of `.IGNORE', then errors will be ignored while running the
commands to update that file. Likewise if a file appears as a dependency
of `.SILENT', then the commands to update that file will not be printed
before they are run. (This change was made to conform to POSIX.2.)
Version 3.71
* The automatic variables `$(@D)', `$(%D)', `$(*D)', `$(<D)', `$(?D)', and
`$(^D)' now omit the trailing slash from the directory name. (This change
was made to comply with POSIX.2.)
* The source distribution now includes the Info files for the Make manual.
There is no longer a separate distribution containing Info and DVI files.
* You can now set the variables `binprefix' and/or `manprefix' in
Makefile.in (or on the command line when installing) to install GNU make
under a name other than `make' (i.e., ``make binprefix=g install''
installs GNU make as `gmake').
* The built-in Texinfo rules use the new variables `TEXI2DVI_FLAGS' for
flags to the `texi2dvi' script, and `MAKEINFO_FLAGS' for flags to the
Makeinfo program.
* The exit status of Make when it runs into errors is now 2 instead of 1.
The exit status is 1 only when using -q and some target is not up to date.
(This change was made to comply with POSIX.2.)
Version 3.70
* It is no longer a fatal error to have a NUL character in a makefile.
You should never put a NUL in a makefile because it can have strange
results, but otherwise empty lines full of NULs (such as produced by
the `xmkmf' program) will always work fine.
* The error messages for nonexistent included makefiles now refer to the
makefile name and line number where the `include' appeared, so Emacs's
C-x ` command takes you there (in case it's a typo you need to fix).
Version 3.69
* Implicit rule search for archive member references is now done in the
opposite order from previous versions: the whole target name `LIB(MEM)'
first, and just the member name and parentheses `(MEM)' second.
* Make now gives an error for an unterminated variable or function reference.
For example, `$(foo' with no matching `)' or `${bar' with no matching `}'.
* The new default variable `MAKE_VERSION' gives the version number of
Make, and a string describing the remote job support compiled in (if any).
Thus the value (in this release) is something like `3.69' or `3.69-Customs'.
* Commands in an invocation of the `shell' function are no longer run with
a modified environment like target commands are. As in versions before
3.68, they now run with the environment that `make' started with. We
have reversed the change made in version 3.68 because it turned out to
cause a paradoxical situation in cases like:
export variable = $(shell echo value)
When Make attempted to put this variable in the environment for a target
command, it would try expand the value by running the shell command
`echo value'. In version 3.68, because it constructed an environment
for that shell command in the same way, Make would begin to go into an
infinite loop and then get a fatal error when it detected the loop.
* The commands given for `.DEFAULT' are now used for phony targets with no
commands.
Version 3.68
* You can list several archive member names inside parenthesis:
`lib(mem1 mem2 mem3)' is equivalent to `lib(mem1) lib(mem2) lib(mem3)'.
* You can use wildcards inside archive member references. For example,
`lib(*.o)' expands to all existing members of `lib' whose names end in
`.o' (e.g. `lib(a.o) lib(b.o)'); `*.a(*.o)' expands to all such members
of all existing files whose names end in `.a' (e.g. `foo.a(a.o)
foo.a(b.o) bar.a(c.o) bar.a(d.o)'.
* A suffix rule `.X.a' now produces two pattern rules:
(%.o): %.X # Previous versions produced only this.
%.a: %.X # Now produces this as well, just like other suffixes.
* The new flag `--warn-undefined-variables' says to issue a warning message
whenever Make expands a reference to an undefined variable.
* The new `-include' directive is just like `include' except that there is
no error (not even a warning) for a nonexistent makefile.
* Commands in an invocation of the `shell' function are now run with a
modified environment like target commands are, so you can use `export' et
al to set up variables for them. They used to run with the environment
that `make' started with.
Version 3.66
* `make --version' (or `make -v') now exits immediately after printing
the version number.
Version 3.65
* Make now supports long-named members in `ar' archive files.
Version 3.64
* Make now supports the `+=' syntax for a variable definition which appends
to the variable's previous value. See the section `Appending More Text
to Variables' in the manual for full details.
* The new option `--no-print-directory' inhibits the `-w' or
`--print-directory' feature. Make turns on `--print-directory'
automatically if you use `-C' or `--directory', and in sub-makes; some
users have found this behavior undesirable.
* The built-in implicit rules now support the alternative extension
`.txinfo' for Texinfo files, just like `.texinfo' and `.texi'.
Version 3.63
* Make now uses a standard GNU `configure' script. See the new file
INSTALL for the new (and much simpler) installation procedure.
* There is now a shell script to build Make the first time, if you have no
other `make' program. `build.sh' is created by `configure'; see README.
* GNU Make now completely conforms to the POSIX.2 specification for `make'.
* Elements of the `$^' and `$?' automatic variables that are archive
member references now list only the member name, as in Unix and POSIX.2.
* You should no longer ever need to specify the `-w' switch, which prints
the current directory before and after Make runs. The `-C' switch to
change directory, and recursive use of Make, now set `-w' automatically.
* Multiple double-colon rules for the same target will no longer have their
commands run simultaneously under -j, as this could result in the two
commands trying to change the file at the same time and interfering with
one another.
* The `SHELL' variable is now never taken from the environment.
Each makefile that wants a shell other than the default (/bin/sh) must
set SHELL itself. SHELL is always exported to child processes.
This change was made for compatibility with POSIX.2.
* Make now accepts long options. There is now an informative usage message
that tells you what all the options are and what they do. Try `make --help'.
* There are two new directives: `export' and `unexport'. All variables are
no longer automatically put into the environments of the commands that
Make runs. Instead, only variables specified on the command line or in
the environment are exported by default. To export others, use:
export VARIABLE
or you can define variables with:
export VARIABLE = VALUE
or:
export VARIABLE := VALUE
You can use just:
export
or:
.EXPORT_ALL_VARIABLES:
to get the old behavior. See the node `Variables/Recursion' in the manual
for a full description.
* The commands from the `.DEFAULT' special target are only applied to
targets which have no rules at all, not all targets with no commands.
This change was made for compatibility with Unix make.
* All fatal error messages now contain `***', so they are easy to find in
compilation logs.
* Dependency file names like `-lNAME' are now replaced with the actual file
name found, as with files found by normal directory search (VPATH).
The library file `libNAME.a' may now be found in the current directory,
which is checked before VPATH; the standard set of directories (/lib,
/usr/lib, /usr/local/lib) is now checked last.
See the node `Libraries/Search' in the manual for full details.
* A single `include' directive can now specify more than one makefile to
include, like this:
include file1 file2
You can also use shell file name patterns in an `include' directive:
include *.mk
* The default directories to search for included makefiles, and for
libraries specified with `-lNAME', are now set by configuration.
* You can now use blanks as well as colons to separate the directories in a
search path for the `vpath' directive or the `VPATH' variable.
* You can now use variables and functions in the left hand side of a
variable assignment, as in "$(foo)bar = value".
* The `MAKE' variable is always defined as `$(MAKE_COMMAND) $(MAKEOVERRIDES)'.
The `MAKE_COMMAND' variable is now defined to the name with which make
was invoked.
* The built-in rules for C++ compilation now use the variables `$(CXX)' and
`$(CXXFLAGS)' instead of `$(C++)' and `$(C++FLAGS)'. The old names had
problems with shells that cannot have `+' in environment variable names.
* The value of a recursively expanded variable is now expanded when putting
it into the environment for child processes. This change was made for
compatibility with Unix make.
* A rule with no targets before the `:' is now accepted and ignored.
This change was made for compatibility with SunOS 4 make.
We do not recommend that you write your makefiles to take advantage of this.
* The `-I' switch can now be used in MAKEFLAGS, and are put there
automatically just like other switches.
Version 3.61
* Built-in rules for C++ source files with the `.C' suffix.
We still recommend that you use `.cc' instead.
* If commands are given too many times for a single target,
the last set given is used, and a warning message is printed.
* Error messages about makefiles are in standard GNU error format,
so C-x ` in Emacs works on them.
* Dependencies of pattern rules which contain no % need not actually exist
if they can be created (just like dependencies which do have a %).
Version 3.60
* A message is always printed when Make decides there is nothing to be done.
It used to be that no message was printed for top-level phony targets
(because "`phony' is up to date" isn't quite right). Now a different
message "Nothing to be done for `phony'" is printed in that case.
* Archives on AIX now supposedly work.
* When the commands specified for .DEFAULT are used to update a target,
the $< automatic variable is given the same value as $@ for that target.
This is how Unix make behaves, and this behavior is mandated by POSIX.2.
Version 3.59
* The -n, -q, and -t options are not put in the `MAKEFLAGS' and `MFLAG'
variables while remaking makefiles, so recursive makes done while remaking
makefiles will behave properly.
* If the special target `.NOEXPORT' is specified in a makefile,
only variables that came from the environment and variables
defined on the command line are exported.
Version 3.58
* Suffix rules may have dependencies (which are ignored).
Version 3.57
* Dependencies of the form `-lLIB' are searched for as /usr/local/lib/libLIB.a
as well as libLIB.a in /usr/lib, /lib, the current directory, and VPATH.
Version 3.55
* There is now a Unix man page for GNU Make. It is certainly not a replacement
for the Texinfo manual, but it documents the basic functionality and the
switches. For full documentation, you should still read the Texinfo manual.
Thanks to Dennis Morse of Stanford University for contributing the initial
version of this.
* Variables which are defined by default (e.g., `CC') will no longer be put
into the environment for child processes. (If these variables are reset by the
environment, makefiles, or the command line, they will still go into the
environment.)
* Makefiles which have commands but no dependencies (and thus are always
considered out of date and in need of remaking), will not be remade (if they
were being remade only because they were makefiles). This means that GNU
Make will no longer go into an infinite loop when fed the makefiles that
`imake' (necessary to build X Windows) produces.
* There is no longer a warning for using the `vpath' directive with an explicit
pathname (instead of a `%' pattern).
Version 3.51
* When removing intermediate files, only one `rm' command line is printed,
listing all file names.
* There are now automatic variables `$(^D)', `$(^F)', `$(?D)', and `$(?F)'.
These are the directory-only and file-only versions of `$^' and `$?'.
* Library dependencies given as `-lNAME' will use "libNAME.a" in the current
directory if it exists.
* The automatic variable `$($/)' is no longer defined.
* Leading `+' characters on a command line make that line be executed even
under -n, -t, or -q (as if the line contained `$(MAKE)').
* For command lines containing `$(MAKE)', `${MAKE}', or leading `+' characters,
only those lines are executed, not their entire rules.
(This is how Unix make behaves for lines containing `$(MAKE)' or `${MAKE}'.)
Version 3.50
* Filenames in rules will now have ~ and ~USER expanded.
* The `-p' output has been changed so it can be used as a makefile.
(All information that isn't specified by makefiles is prefaced with comment
characters.)
Version 3.49
* The % character can be quoted with backslash in implicit pattern rules,
static pattern rules, `vpath' directives, and `patsubst', `filter', and
`filter-out' functions. A warning is issued if a `vpath' directive's
pattern contains no %.
* The `wildcard' variable expansion function now expands ~ and ~USER.
* Messages indicating failed commands now contain the target name:
make: *** [target] Error 1
* The `-p' output format has been changed somewhat to look more like
makefile rules and to give all information that Make has about files.
Version 3.48
Version 3.47
* The `-l' switch with no argument removes any previous load-average limit.
* When the `-w' switch is in effect, and Make has updated makefiles,
it will write a `Leaving directory' messagfe before re-executing itself.
This makes the `directory change tracking' changes to Emacs's compilation
commands work properly.
Version 3.46
* The automatic variable `$*' is now defined for explicit rules,
as it is in Unix make.
Version 3.45
* The `-j' switch is now put in the MAKEFLAGS and MFLAGS variables when
specified without an argument (indicating infinite jobs).
The `-l' switch is not always put in the MAKEFLAGS and MFLAGS variables.
* Make no longer checks hashed directories after running commands.
The behavior implemented in 3.41 caused too much slowdown.
Version 3.44
* A dependency is NOT considered newer than its dependent if
they have the same modification time. The behavior implemented
in 3.43 conflicts with RCS.
Version 3.43
* Dependency loops are no longer fatal errors.
* A dependency is considered newer than its dependent if
they have the same modification time.
Version 3.42
* The variables F77 and F77FLAGS are now set by default to $(FC) and
$(FFLAGS). Makefiles designed for System V make may use these variables in
explicit rules and expect them to be set. Unfortunately, there is no way to
make setting these affect the Fortran implicit rules unless FC and FFLAGS
are not used (and these are used by BSD make).
Version 3.41
* Make now checks to see if its hashed directories are changed by commands.
Other makes that hash directories (Sun, 4.3 BSD) don't do this.
Version 3.39
* The `shell' function no longer captures standard error output.
Version 3.32
* A file beginning with a dot can be the default target if it also contains
a slash (e.g., `../bin/foo'). (Unix make allows this as well.)
Version 3.31
* Archive member names are truncated to 15 characters.
* Yet more USG stuff.
* Minimal support for Microport System V (a 16-bit machine and a
brain-damaged compiler). This has even lower priority than other USG
support, so if it gets beyond trivial, I will take it out completely.
* Revamped default implicit rules (not much visible change).
* The -d and -p options can come from the environment.
Version 3.30
* Improved support for USG and HPUX (hopefully).
* A variable reference like `$(foo:a=b)', if `a' contains a `%', is
equivalent to `$(patsubst a,b,$(foo))'.
* Defining .DEFAULT with no deps or commands clears its commands.
* New default implicit rules for .S (cpp, then as), and .sh (copy and make
executable). All default implicit rules that use cpp (even indirectly), use
$(CPPFLAGS).
Version 3.29
* Giving the -j option with no arguments gives you infinite jobs.
Version 3.28
* New option: "-l LOAD" says not to start any new jobs while others are
running if the load average is not below LOAD (a floating-point number).
* There is support in place for implementations of remote command execution
in Make. See the file remote.c.
Version 3.26
* No more than 10 directories will be kept open at once.
(This number can be changed by redefining MAX_OPEN_DIRECTORIES in dir.c.)
Version 3.25
* Archive files will have their modification times recorded before doing
anything that might change their modification times by updating an archive
member.
Version 3.20
* The `MAKELEVEL' variable is defined for use by makefiles.
Version 3.19
* The recursion level indications in error messages are much shorter than
they were in version 3.14.
Version 3.18
* Leading spaces before directives are ignored (as documented).
* Included makefiles can determine the default goal target.
(System V Make does it this way, so we are being compatible).
Version 3.14.
* Variables that are defaults built into Make will not be put in the
environment for children. This just saves some environment space and,
except under -e, will be transparent to sub-makes.
* Error messages from sub-makes will indicate the level of recursion.
* Hopefully some speed-up for large directories due to a change in the
directory hashing scheme.
* One child will always get a standard input that is usable.
* Default makefiles that don't exist will be remade and read in.
Version 3.13.
* Count parentheses inside expansion function calls so you can
have nested calls: `$(sort $(foreach x,a b,$(x)))'.
Version 3.12.
* Several bug fixes, including USG and Sun386i support.
* `shell' function to expand shell commands a la `
* If the `-d' flag is given, version information will be printed.
* The `-c' option has been renamed to `-C' for compatibility with tar.
* The `-p' option no longer inhibits other normal operation.
* Makefiles will be updated and re-read if necessary.
* Can now run several commands at once (parallelism), -j option.
* Error messages will contain the level of Make recursion, if any.
* The `MAKEFLAGS' and `MFLAGS' variables will be scanned for options after
makefiles are read.
* A double-colon rule with no dependencies will always have its commands run.
(This is how both the BSD and System V versions of Make do it.)
Version 3.05
(Changes from versions 1 through 3.05 were never recorded. Sorry.)
----------------------------------------------------------------------
Copyright information:
Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
Permission is granted to anyone to make or distribute verbatim copies
of this document as received, in any medium, provided that the
copyright notice and this permission notice are preserved,
thus giving the recipient permission to redistribute in turn.
Permission is granted to distribute modified versions
of this document, or of portions of it,
under the above conditions, provided also that they
carry prominent notices stating who last changed them.
Local variables:
version-control: never
end:

28
README Normal file
View file

@ -0,0 +1,28 @@
This directory contains the 3.72.8 test release of GNU Make.
All bugs reported for previous test releases have been fixed.
Some bugs surely remain.
For general building and installation instructions, see the file INSTALL.
If you need to build GNU Make and have no other `make' program to use,
you can use the shell script `build.sh' instead. To do this, first run
`configure' as described in INSTALL. Then, instead of typing `make' to
build the program, type `sh build.sh'. This should compile the program
in the current directory. Then you will have a Make program that you can
use for `make install', or whatever else.
It has been reported that the XLC 1.2 compiler on AIX 3.2 is buggy such
that if you compile make with `cc -O' on AIX 3.2, it will not work correctly.
It is said that using `cc' without `-O' does work.
One area that is often a problem in configuration and porting is the code
to check the system's current load average. To make it easier to test and
debug this code, you can do `make check-loadavg' to see if it works
properly on your system. (You must run `configure' beforehand, but you
need not build Make itself to run this test.)
See the file NEWS for what has changed since previous releases.
GNU Make is fully documented in make.texinfo. See the section entitled
`Problems and Bugs' for information on submitting bug reports.
GNU Make is free software. See the file COPYING for copying conditions.

19
aclocal.m4 vendored Normal file
View file

@ -0,0 +1,19 @@
dnl
dnl Check for a symbol
dnl
AC_DEFUN(AC_CHECK_SYMBOL, [dnl
AC_MSG_CHECKING(for $1)
AC_CACHE_VAL(ac_cv_check_symbol_$1, [dnl
AC_TRY_LINK(,
changequote(,)dnl
extern char *$1[]; puts(*$1);,
changequote([,])dnl
ac_cv_check_symbol_$1=yes, ac_cv_check_symbol_$1=no)])
if test "$ac_cv_check_symbol_$1" = yes; then
changequote(,)dnl
ac_tr_symbol=`echo $1 | tr '[a-z]' '[A-Z]'`
changequote([,])dnl
AC_DEFINE_UNQUOTED(HAVE_${ac_tr_symbol})
fi
AC_MSG_RESULT($ac_cv_check_symbol_$1)])dnl
dnl

274
config.h.in Normal file
View file

@ -0,0 +1,274 @@
/* config.h.in. Generated automatically from configure.in by autoheader. */
/* Define if on AIX 3.
System headers sometimes define this.
We just want to avoid a redefinition error message. */
#ifndef _ALL_SOURCE
#undef _ALL_SOURCE
#endif
/* Define if using alloca.c. */
#undef C_ALLOCA
/* Define to empty if the keyword does not work. */
#undef const
/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
This function is required for alloca.c support on those systems. */
#undef CRAY_STACKSEG_END
/* Define for DGUX with <sys/dg_sys_info.h>. */
#undef DGUX
/* Define to the type of elements in the array set by `getgroups'.
Usually this is either `int' or `gid_t'. */
#undef GETGROUPS_T
/* Define if the `getloadavg' function needs to be run setuid or setgid. */
#undef GETLOADAVG_PRIVILEGED
/* Define to `int' if <sys/types.h> doesn't define. */
#undef gid_t
/* Define if you have alloca, as a function or macro. */
#undef HAVE_ALLOCA
/* Define if you have <alloca.h> and it should be used (not on Ultrix). */
#undef HAVE_ALLOCA_H
/* Define if you don't have vprintf but do have _doprnt. */
#undef HAVE_DOPRNT
/* Define if your system has its own `getloadavg' function. */
#undef HAVE_GETLOADAVG
/* Define if you have the getmntent function. */
#undef HAVE_GETMNTENT
/* Define if the `long double' type works. */
#undef HAVE_LONG_DOUBLE
/* Define if you support file names longer than 14 characters. */
#undef HAVE_LONG_FILE_NAMES
/* Define if you have a working `mmap' system call. */
#undef HAVE_MMAP
/* Define if system calls automatically restart after interruption
by a signal. */
#undef HAVE_RESTARTABLE_SYSCALLS
/* Define if your struct stat has st_blksize. */
#undef HAVE_ST_BLKSIZE
/* Define if your struct stat has st_blocks. */
#undef HAVE_ST_BLOCKS
/* Define if you have the strcoll function and it is properly defined. */
#undef HAVE_STRCOLL
/* Define if your struct stat has st_rdev. */
#undef HAVE_ST_RDEV
/* Define if you have the strftime function. */
#undef HAVE_STRFTIME
/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
#undef HAVE_SYS_WAIT_H
/* Define if your struct tm has tm_zone. */
#undef HAVE_TM_ZONE
/* Define if you don't have tm_zone but do have the external array
tzname. */
#undef HAVE_TZNAME
/* Define if you have <unistd.h>. */
#undef HAVE_UNISTD_H
/* Define if utime(file, NULL) sets file's timestamp to the present. */
#undef HAVE_UTIME_NULL
/* Define if you have <vfork.h>. */
#undef HAVE_VFORK_H
/* Define if you have the vprintf function. */
#undef HAVE_VPRINTF
/* Define if you have the wait3 system call. */
#undef HAVE_WAIT3
/* Define if on MINIX. */
#undef _MINIX
/* Define if your struct nlist has an n_un member. */
#undef NLIST_NAME_UNION
/* Define if you have <nlist.h>. */
#undef NLIST_STRUCT
/* Define if your C compiler doesn't accept -c and -o together. */
#undef NO_MINUS_C_MINUS_O
/* Define to `int' if <sys/types.h> doesn't define. */
#undef pid_t
/* Define if the system does not provide POSIX.1 features except
with this defined. */
#undef _POSIX_1_SOURCE
/* Define if you need to in order for stat and other things to work. */
#undef _POSIX_SOURCE
/* Define as the return type of signal handlers (int or void). */
#undef RETSIGTYPE
/* Define if the setvbuf function takes the buffering type as its second
argument and the buffer pointer as the third, as on System V
before release 3. */
#undef SETVBUF_REVERSED
/* If using the C implementation of alloca, define if you know the
direction of stack growth for your system; otherwise it will be
automatically deduced at run-time.
STACK_DIRECTION > 0 => grows toward higher addresses
STACK_DIRECTION < 0 => grows toward lower addresses
STACK_DIRECTION = 0 => direction of growth unknown
*/
#undef STACK_DIRECTION
/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly. */
#undef STAT_MACROS_BROKEN
/* Define if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Define on System V Release 4. */
#undef SVR4
/* Define if `sys_siglist' is declared by <signal.h>. */
#undef SYS_SIGLIST_DECLARED
/* Define to `int' if <sys/types.h> doesn't define. */
#undef uid_t
/* Define for Encore UMAX. */
#undef UMAX
/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
instead of <sys/cpustats.h>. */
#undef UMAX4_3
/* Define vfork as fork if vfork does not work. */
#undef vfork
/* Define to the name of the SCCS `get' command. */
#undef SCCS_GET
/* Define this if the SCCS `get' command understands the `-G<file>' option. */
#undef SCCS_GET_MINUS_G
/* Define this if the C library defines the variable `sys_siglist'. */
#undef HAVE_SYS_SIGLIST
/* Define this if the C library defines the variable `_sys_siglist'. */
#undef HAVE__SYS_SIGLIST
/* Define this if you have the `union wait' type in <sys/wait.h>. */
#undef HAVE_UNION_WAIT
/* Define this if the POSIX.1 call `sysconf (_SC_OPEN_MAX)' works properly. */
#undef HAVE_SYSCONF_OPEN_MAX
/* Define if you have the dup2 function. */
#undef HAVE_DUP2
/* Define if you have the getcwd function. */
#undef HAVE_GETCWD
/* Define if you have the getdtablesize function. */
#undef HAVE_GETDTABLESIZE
/* Define if you have the getgroups function. */
#undef HAVE_GETGROUPS
/* Define if you have the mktemp function. */
#undef HAVE_MKTEMP
/* Define if you have the psignal function. */
#undef HAVE_PSIGNAL
/* Define if you have the setegid function. */
#undef HAVE_SETEGID
/* Define if you have the seteuid function. */
#undef HAVE_SETEUID
/* Define if you have the setlinebuf function. */
#undef HAVE_SETLINEBUF
/* Define if you have the setregid function. */
#undef HAVE_SETREGID
/* Define if you have the setreuid function. */
#undef HAVE_SETREUID
/* Define if you have the sigsetmask function. */
#undef HAVE_SIGSETMASK
/* Define if you have the strerror function. */
#undef HAVE_STRERROR
/* Define if you have the strsignal function. */
#undef HAVE_STRSIGNAL
/* Define if you have the wait3 function. */
#undef HAVE_WAIT3
/* Define if you have the waitpid function. */
#undef HAVE_WAITPID
/* Define if you have the <dirent.h> header file. */
#undef HAVE_DIRENT_H
/* Define if you have the <fcntl.h> header file. */
#undef HAVE_FCNTL_H
/* Define if you have the <limits.h> header file. */
#undef HAVE_LIMITS_H
/* Define if you have the <mach/mach.h> header file. */
#undef HAVE_MACH_MACH_H
/* Define if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define if you have the <ndir.h> header file. */
#undef HAVE_NDIR_H
/* Define if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define if you have the <sys/dir.h> header file. */
#undef HAVE_SYS_DIR_H
/* Define if you have the <sys/ndir.h> header file. */
#undef HAVE_SYS_NDIR_H
/* Define if you have the <sys/param.h> header file. */
#undef HAVE_SYS_PARAM_H
/* Define if you have the <sys/timeb.h> header file. */
#undef HAVE_SYS_TIMEB_H
/* Define if you have the <sys/wait.h> header file. */
#undef HAVE_SYS_WAIT_H
/* Define if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define if you have the dgc library (-ldgc). */
#undef HAVE_LIBDGC
/* Define if you have the sun library (-lsun). */
#undef HAVE_LIBSUN

3055
configure vendored Executable file

File diff suppressed because it is too large Load diff

31
loadtest.c Normal file
View file

@ -0,0 +1,31 @@
extern volatile void exit (int);
extern double load_average (void);
double max_load_average = -1;
unsigned int job_slots_used = 0;
int
main ()
{
printf ("load_average () = %.2f\n", load_average ());
exit (0);
}
void
error (char *fmt, ...)
{
exit (1);
}
void
perror_with_name (char *a, char *b)
{
exit (1);
}
void
wait_for_children (int i)
{
return;
}

7
version.c Normal file
View file

@ -0,0 +1,7 @@
char *version_string = "3.72.8";
/*
Local variables:
version-control: never
End:
*/