The fix for SV 44742 had a side-effect that some double-colon targets
were skipped. This happens because the "considered" facility assumed
that all targets would be visited on each walk through the dependency
graph: we used a bit for considered and toggled it on each pass; if
we didn't walk the entire graph on every pass the bit would get out
of sync. The new behavior after SV 44742 might return early without
walking the entire graph. To fix this I changed the considered value
to an integer which is monotonically increasing: it is then never
possible to incorrectly determine that a previous pass through the
graph already considered the current target.
* filedef.h (struct file): make CONSIDERED an unsigned int.
* main.c (main): No longer need to reset CONSIDERED.
* remake.c (update_goal_chain): increment CONSIDERED rather than
inverting it between 0<->1.
(update_file_1): Reset CONSIDERED to 0 so it's re-considered.
(check_dep): Ditto.
* tests/scripts/features/double_colon: Add a regression test.
* remake.c (update_file): Don't update double-colon target status
if we're still building targets.
(ftime_t): Don't propagate timestamps for double-colon targets that
we've not examined yet.
* tests/scripts/features/double_colon: Add parallel build tests.
Copyright-paperwork-exempt: yes
While displaying line numbers, show the relevant line number inside
the recipe not just the first line of the entire recipe.
Sample changes suggested by Brian Vandenberg <phantall@gmail.com>
* gnumake.h (gmk_floc): Add an 'offset' to track the recipe offset.
* read.c (eval, eval_makefile, eval_buffer): Initialize 'offset'.
(record_files, install_pattern_rule): Ditto.
* job.c (new_job, job_next_command): Update 'offset' based on the
line of the recipe we're expanding or invoking.
(child_error): Add 'offset' when showing the line number.
* function.c (func_shell_base): Ditto.
* output.c (error, fatal): Ditto.
* NEWS: Mention the new ability.
* tests/scripts/features/errors: Check the line number on errors.
* tests/scripts/functions/warning: Check the line number on warnings.
* tests/scripts/features/output-sync,
tests/scripts/features/parallelism, tests/scripts/functions/shell,
tests/scripts/functions/error: Update line numbers.
Delay the generation of error messages for included files until we
are sure that we can't rebuild that included file.
* dep.h (struct dep): Don't reuse "changed"; make a separate field
to keep "flags". Get rid of dontcare and use the flag.
(struct goaldep): Create a new structure for goal prereqs
that tracks an errno value and the floc where the include happened.
Rework the structures to ensure they are supersets as expected.
In maintainer mode with GCC, use inline to get type checking.
* read.c (eval_makefile): Return a struct goaldep for the new
makefile. Ensure errno is set properly to denote a failure.
(read_all_makefiles): Switch to goaldep and check errno.
(eval): Don't show included file errors; instead remember them.
* remake.c (update_goal_chain): Set global variables to the current
goaldep we're building, and the entire chain.
(show_goal_error): Check if the current failure is a consequence
of building an included makefile and if so print an error.
(complain): Call show_goal_error() on rule failure.
* job.c (child_error): Call show_goal_error() on child error.
* main.c (main): Switch from struct dep to goaldep.
* misc.c (free_dep_chain): Not used; make into a macro.
* tests/scripts/features/include: Update and include new tests.
* tests/scripts/options/dash-B, tests/scripts/options/dash-W,
tests/scripts/options/print-directory,
tests/scripts/variables/MAKE_RESTARTS: Update known-good-output.
Previously if the jobserver was active, MAKEFLAGS would contain only
the -j option but not the number (not -j5 or whatever) so users
could not discover that value. Allow that value to be provided in
MAKEFLAGS without error but still give warnings if -jN is provided
on the command line if the jobserver is already activated.
* NEWS: Discuss the new behavior.
* os.h, posixos.c, w32/w32os.c: Return success/failure from
jobserver_setup() and jobserver_parse_auth().
* main.c (main): Separate the command line storage of job slots (now
in arg_job_slots) from the control storage (in job_slots). Make a
distinction between -jN flags read from MAKEFLAGS and those seen
on the command line: for the latter if the jobserver is enabled then
warn and disable it, as before.
* tests/scripts/features/jobserver: Add new testing.
* NEWS: Mention the change.
* main.c: Rename jobserver_fds variable to jobserver_auth and
--jobserver-fds option to --jobserver-auth.
* os.h, posixos.c, w32/w32os.c: Rename jobserver_parse_arg() and
jobserver_get_arg() to jobserver_parse_auth()/jobserver_get_auth().
* makeint.h: Change MAP_SPACE to MAP_NEWLINE, and add MAP_PATHSEP
and MAP_SPACE which is now MAP_BLANK|MAP_NEWLINE. Create
NEW_TOKEN(), END_OF_TOKEN(), ISBLANK(), ISSPACE() macros.
* main.c (initialize_stopchar_map): Set MAP_NEWLINE only for
newline characters.
* Convert all uses of isblank() and isspace() to macros.
* Examine all uses of isblank() (doesn't accept newlines) and
change them wherever possible to ISSPACE() (does accept newlines).
* function.c (func_foreach): Strip leading/trailing space.
* variable.c (parse_variable_definition): Clean up.
* tests/scripts/functions/foreach: Test settings and errors.
* tests/scripts/functions/call: Rewrite to new-style.
* tests/scripts/misc/bs-nl: Add many more tests for newlines.
* NEWS: Add information about reading files.
* make.texi (File Function): Describe reading files.
* tests/scripts/functions/file: Test new features for $(file ...)
For performance, we only recompute .VARIABLES when (a) it's expanded
and (b) when its value will change from a previous expansion. To
determine (b) we were checking the number of entries in the hash
table which used to work until we started undefining entries: now if
you undefine and redefine the same number of entries in between
expanding .VARIABLES, it doesn't detect any change. Instead, keep
an increasing change number.
* variables.c: Add variable_changenum.
(define_variable_in_set, merge_variable_sets): Increment
variable_changenum if adding a new variable to the global set.
(undefine_variable_in_set): Increment variable_changenum if
undefining a variable from the global set.
(lookup_special_var): Test variable_changenum not the hash table.
* tests/scripts/variables/special: Test undefining variables.
* main.c (main): Pre-define .LOADED as a default-level variable.
* load.c (load_file): Set the value rather than append it. Avoid
adding an extra initial whitespace.
* tests/scripts/features/load: Run with --warn-undefined-variables.
* job.h (struct child): New bit to mark recursive command lines.
* job.c (start_job_command): Set the recursive command line bit.
(reap_children): If the child is a recursive command and it exits
with 1 during question mode, don't print an error and exit with 1.
* tests/scripts/options/dash-q: Add a regression test.
Newer versions of binutils allow ar to be compiled to generate
"deterministic archives" by default: in this mode no timestamp
information is generated in the static archive, which utterly
breaks GNU make's archive updating capability. Debian and Ubuntu
have turned this feature on by default in their distributions
which causes the regression tests to fail.
Update the regression tests to check for the availability of the
"U" option to ar which disables deterministic archives and allows
GNU make's archive support to work properly again.
In order to fix SV 12267 we were marking the prerequisites of
implicit (pattern) targets that existed elsewhere in the makefile
as precious to keep them from being deleted as intermediate files.
However this also keeps them from being deleted on error. Instead
mark them as secondary.
* tests/scripts/targets/DELETE_ON_ERROR: Test DELETE_ON_ERROR.
Add a new variable .SHELLSTATUS which holds the exit status of the
last-invoked shell function or != assignment.
* NEWS, doc/make.texi: Document the change.
* function.c (shell_completed, msdos_openpipe, func_shell_base): Add
shell_completed() to handle the completion of the shell, by setting
.SHELLSTATUS. Call it where needed.
* job.c (child_handler): Call shell_completed().
* tests/scripts/functions/shell: Add tests for .SHELLSTATUS.
Upated to match change to run_make_tests and some future fixes to
make on VMS.
* arscan.c: Use ANSI compatible pragmas instead of VAX C extensions.
* tests/scripts/features/archives: Fix tests to use VMS rules and
answers when running on VMS and using DCL as a shell.
* tests/scripts/features/vpath3: Fix epected answer on test when
run on VMS.
* tests/scripts/vms/library: (New) Test the VMS library rules that
are not tested by existing tests.
* run_make_tests.pl: set $port_type to be 'VMS-DCL' when the test are
run from the VMS DCL Interpreter. When the tests are run from GNV
on VMS, the $port_type will be 'UNIX'.
* run_make_tests.com: VMS search list support. This is needed for
using a search list such as prj_root = lcl_root:,vms_root:,src_root:
for building and testing.
* config_flags_pm.com, test_make.com: set up and run the regression
test environment on VMS.
* tests/run_make_tests.pl [VMS]: Use an alternate rmdir()
implementation on VMS.
(run_make_with_options) [VMS]: Provide VMS-specific quoting and shell
invocations.
(set_more_defaults) [VMS]: Set default values when running on VMS.
* tests/test_driver.pl (vms_get_process_logicals) [VMS]: Retrieve the
proper values from %ENV on VMS.
(resetENV) [VMS]: Use it.
(toplevel) [VMS]: Fix a bug with opendir() on some logical_devices.
(compare_output) [VMS]: Convert VMS test output to a "standard" format.
(_run_command) [VMS]: Handle signals and exit codes the VMS way.
(remove_directory_tree_inner) [VMS]: Unlink all versions of the file.
Reported by Tim Murphy <tnmurphy@gmail.com>
* function.c (func_file): Only write TEXT if it is not NULL.
* NEWS, doc/make.texi: Document the new feature
* tests/scripts/functions/file: Verify that the no-text version of
$(file ...) works and doesn't add a newline.
* remake.c (update_file, update_file_1, check_dep): Return an enum
update_status value instead of an int, and keep the highest value we
find as we walk the graph so that the ultimate status is correct.
* tests/scripts/options/dash-q: Add a test for updating prerequisites.
* tests/config-flags.pm.in: A new file containing variable assignments
for the test suite; these variables are set by configure to contain
the values detected there for compilers, flags, etc.
* tests/run_make_tests.pl: Require the config-flags.pm file
* tests/scripts/features/load, tests/scripts/features/loadapi: Use the
configure-provided values when building the shared test library.
* configure.ac: Replace tests/config-flags.pm.in
* Makefile.am: Make sure tests/config-flags.pm is up to date
Rename existing ChangeLog files so they won't be distributed.
Add targets to maintMakefile to generate ChangeLog from the Git
repository. This will require a version of gnulib be available.
Because ChangeLog is auto-generated, we have to switch our
automake mode to "foreign" or it will complain and fail.
Expand the characters which are legal in a function name, and check
the name for validity. Create a type for the function pointer.
Convert the last argument from a boolean to flags, to allow for expansion.
