make/config.h.W32.template

528 lines
15 KiB
Text
Raw Normal View History

/* config.h.W32 -- hand-massaged config.h file for Windows builds -*-C-*-
2013-05-17 05:46:11 +00:00
Copyright (C) 1996-2013 Free Software Foundation, Inc.
This file is part of GNU Make.
GNU Make is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation; either version 3 of the License, or (at your option) any later
version.
GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program. If not, see <http://www.gnu.org/licenses/>. */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Suppress some Visual C++ warnings.
Maybe after the code cleanup for ISO C we can remove some/all of these. */
#if _MSC_VER > 1000
# pragma warning(disable:4100) /* unreferenced formal parameter */
# pragma warning(disable:4102) /* unreferenced label */
# pragma warning(disable:4127) /* conditional expression is constant */
# pragma warning(disable:4131) /* uses old-style declarator */
# pragma warning(disable:4702) /* unreachable code */
# define _CRT_SECURE_NO_WARNINGS /* function or variable may be unsafe */
# define _CRT_NONSTDC_NO_WARNINGS /* functions w/o a leading underscore */
#endif
/* Define to 1 if the 'closedir' function returns void instead of 'int'. */
1998-10-03 05:39:55 +00:00
/* #undef CLOSEDIR_VOID */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to one of '_getb67', 'GETB67', 'getb67' for Cray-2 and Cray-YMP
systems. This function is required for 'alloca.c' support on those systems.
*/
1998-10-03 05:39:55 +00:00
/* #undef CRAY_STACKSEG_END */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if using 'alloca.c'. */
/* #undef C_ALLOCA */
/* Define to 1 if using 'getloadavg.c'. */
#define C_GETLOADAVG 1
/* Define to 1 for DGUX with <sys/dg_sys_info.h>. */
1998-10-03 05:39:55 +00:00
/* #undef DGUX */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if translation of program messages to the user's native
language is requested. */
/* #undef ENABLE_NLS */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Use high resolution file timestamps if nonzero. */
#define FILE_TIMESTAMP_HI_RES 0
2000-06-20 05:48:40 +00:00
/* Define to 1 if the 'getloadavg' function needs to be run setuid or setgid.
*/
/* #undef GETLOADAVG_PRIVILEGED */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have 'alloca', as a function or macro. */
1998-07-30 20:54:47 +00:00
#define HAVE_ALLOCA 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
*/
1998-10-03 05:39:55 +00:00
/* #undef HAVE_ALLOCA_H */
1997-04-07 07:21:16 +00:00
/* Define to 1 if you have the 'atexit' function. */
#define HAVE_ATEXIT 1
/* Use case insensitive file names */
/* #undef HAVE_CASE_INSENSITIVE_FS */
/* Define to 1 if you have the clock_gettime function. */
/* #undef HAVE_CLOCK_GETTIME */
/* Embed GNU Guile support. Windows build sets this on the
compilation command line. */
/* #undef HAVE_GUILE */
/* Define if the GNU dcgettext() function is already present or preinstalled.
*/
/* #undef HAVE_DCGETTEXT */
/* Define to 1 if you have the declaration of 'bsd_signal', and to 0 if you
don't. */
#define HAVE_DECL_BSD_SIGNAL 0
/* Define to 1 if you have the declaration of 'sys_siglist', and to 0 if you
don't. */
#define HAVE_DECL_SYS_SIGLIST 0
/* Define to 1 if you have the declaration of '_sys_siglist', and to 0 if you
don't. */
#define HAVE_DECL__SYS_SIGLIST 0
/* Define to 1 if you have the declaration of '__sys_siglist', and to 0 if you
don't. */
#define HAVE_DECL___SYS_SIGLIST 0
/* Define to 1 if you have the <dirent.h> header file, and it defines 'DIR'.
*/
#define HAVE_DIRENT_H 1
/* Define to 1 if you have the <direct.h> header file, and it defines getcwd()
and chdir().
*/
#if (defined(_MSC_VER) || defined(__BORLANDC__)) && !defined(__INTERIX)
# define HAVE_DIRECT_H 1
#endif
/* Use platform specific coding */
#define HAVE_DOS_PATHS 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'dup2' function. */
#define HAVE_DUP2 1
/* Define to 1 if you have the <fcntl.h> header file. */
#define HAVE_FCNTL_H 1
/* Define to 1 if you have the 'fdopen' function. */
#ifdef __MINGW32__
#define HAVE_FDOPEN 1
#endif
/* Define to 1 if you have the 'fileno' function. */
#define HAVE_FILENO 1
/* Define to 1 if you have the 'getcwd' function. */
#define HAVE_GETCWD 1
/* Define to 1 if you have the 'getgroups' function. */
/* #undef HAVE_GETGROUPS */
/* Define to 1 if you have the 'gethostbyname' function. */
/* #undef HAVE_GETHOSTBYNAME */
/* Define to 1 if you have the 'gethostname' function. */
/* #undef HAVE_GETHOSTNAME */
/* Define to 1 if you have the 'getloadavg' function. */
1998-10-03 05:39:55 +00:00
/* #undef HAVE_GETLOADAVG */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'getrlimit' function. */
/* #undef HAVE_GETRLIMIT */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define if the GNU gettext() function is already present or preinstalled. */
/* #undef HAVE_GETTEXT */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have a standard gettimeofday function */
#ifdef __MINGW32__
#define HAVE_GETTIMEOFDAY 1
#endif
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define if you have the iconv() function. */
/* #undef HAVE_ICONV */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <inttypes.h> header file. */
#ifdef __MINGW32__
#define HAVE_INTTYPES_H 1
#endif
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'dgc' library (-ldgc). */
/* #undef HAVE_LIBDGC */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'kstat' library (-lkstat). */
/* #undef HAVE_LIBKSTAT */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <limits.h> header file. */
#define HAVE_LIMITS_H 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <locale.h> header file. */
/*#define HAVE_LOCALE_H 1*/
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'lstat' function. */
/* #undef HAVE_LSTAT */
/* Define to 1 if you have the <mach/mach.h> header file. */
/* #undef HAVE_MACH_MACH_H */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <memory.h> header file. */
#define HAVE_MEMORY_H 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'mkstemp' function. */
/* #undef HAVE_MKSTEMP */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'mktemp' function. */
#define HAVE_MKTEMP 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <ndir.h> header file, and it defines 'DIR'. */
/* #undef HAVE_NDIR_H */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <nlist.h> header file. */
/* #undef HAVE_NLIST_H */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'pipe' function. */
/* #undef HAVE_PIPE */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'pstat_getdynamic' function. */
/* #undef HAVE_PSTAT_GETDYNAMIC */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'readlink' function. */
/* #undef HAVE_READLINK */
/* Define to 1 if you have the 'realpath' function. */
/* #undef HAVE_REALPATH */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if <signal.h> defines the SA_RESTART constant. */
/* #undef HAVE_SA_RESTART */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'setegid' function. */
/* #undef HAVE_SETEGID */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'seteuid' function. */
/* #undef HAVE_SETEUID */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'setlinebuf' function. */
/* #undef HAVE_SETLINEBUF */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'setlocale' function. */
/*#define HAVE_SETLOCALE 1*/
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'setregid' function. */
/* #undef HAVE_SETREGID */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'setreuid' function. */
/* #undef HAVE_SETREUID */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'setrlimit' function. */
/* #undef HAVE_SETRLIMIT */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'setvbuf' function. */
#define HAVE_SETVBUF 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'sigaction' function. */
/* #undef HAVE_SIGACTION */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'sigsetmask' function. */
/* #undef HAVE_SIGSETMASK */
/* Define to 1 if you have the 'socket' function. */
/* #undef HAVE_SOCKET */
/* Define to 1 if you have the <stdint.h> header file. */
#ifdef __MINGW32__
#define HAVE_STDINT_H 1
#endif
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <stdlib.h> header file. */
#define HAVE_STDLIB_H 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'strcasecmp' function. */
#ifdef __MINGW32__
#define HAVE_STRCASECMP 1
#endif
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'strcmpi' function. */
#define HAVE_STRCMPI 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'strcoll' function and it is properly defined.
*/
#define HAVE_STRCOLL 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'strdup' function. */
#define HAVE_STRDUP 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'strerror' function. */
#define HAVE_STRERROR 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'stricmp' function. */
#define HAVE_STRICMP 1
/* Define to 1 if you have the <strings.h> header file. */
/* #define HAVE_STRINGS_H 1 */
1997-08-27 20:36:31 +00:00
/* Define to 1 if you have the <string.h> header file. */
#define HAVE_STRING_H 1
1997-08-27 20:36:31 +00:00
/* Define to 1 if you have the 'strncasecmp' function. */
#ifdef __MINGW32__
#define HAVE_STRNCASECMP 1
#endif
/* Define to 1 if you have the 'strncmpi' function. */
/* #undef HAVE_STRNCMPI */
/* Define to 1 if you have the 'strndup' function. */
/* #undef HAVE_STRNDUP */
/* Define to 1 if you have the 'strnicmp' function. */
#ifdef __MINGW32__
#define HAVE_STRNICMP 1
#endif
/* Define to 1 if you have the 'strsignal' function. */
/* #undef HAVE_STRSIGNAL */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if 'n_un.n_name' is a member of 'struct nlist'. */
/* #undef HAVE_STRUCT_NLIST_N_UN_N_NAME */
2000-04-22 02:11:17 +00:00
/* Define to 1 if you have the <sys/dir.h> header file, and it defines 'DIR'.
*/
/* #undef HAVE_SYS_DIR_H */
2000-04-22 02:11:17 +00:00
/* Define to 1 if you have the <sys/ndir.h> header file, and it defines 'DIR'.
*/
/* #undef HAVE_SYS_NDIR_H */
2000-04-22 02:11:17 +00:00
/* Define to 1 if you have the <sys/param.h> header file. */
#ifdef __MINGW32__
#define HAVE_SYS_PARAM_H 1
#endif
2000-04-22 02:11:17 +00:00
/* Define to 1 if you have the <sys/resource.h> header file. */
/* #undef HAVE_SYS_RESOURCE_H */
2000-04-22 02:11:17 +00:00
/* Define to 1 if you have the <sys/stat.h> header file. */
#define HAVE_SYS_STAT_H 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <sys/timeb.h> header file. */
#define HAVE_SYS_TIMEB_H 1
/* Define to 1 if you have the <sys/time.h> header file. */
#ifdef __MINGW32__
#define HAVE_SYS_TIME_H 1
#endif
/* Define to 1 if you have the <sys/types.h> header file. */
#define HAVE_SYS_TYPES_H 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <sys/wait.h> header file. */
/* #undef HAVE_SYS_WAIT_H */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the \'union wait' type in <sys/wait.h>. */
1998-10-03 05:39:55 +00:00
/* #undef HAVE_UNION_WAIT */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the <unistd.h> header file. */
#ifdef __MINGW32__
#define HAVE_UNISTD_H 1
#endif
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'wait3' function. */
/* #undef HAVE_WAIT3 */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the 'waitpid' function. */
/* #undef HAVE_WAITPID */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Build host information. */
#define MAKE_HOST "Windows32"
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 to enable job server support in GNU make. */
#define MAKE_JOBSERVER 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 to enable 'load' support in GNU make. */
#define MAKE_LOAD 1
/* Define to 1 to enable symbolic link timestamp checking. */
/* #undef MAKE_SYMLINKS */
/* Define to 1 if your 'struct nlist' has an 'n_un' member. Obsolete, depend
on 'HAVE_STRUCT_NLIST_N_UN_N_NAME */
/* #undef NLIST_NAME_UNION */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if struct nlist.n_name is a pointer rather than an array. */
/* #undef NLIST_STRUCT */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if your C compiler doesn't accept -c and -o together. */
/* #undef NO_MINUS_C_MINUS_O */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Name of this package (needed by automake) */
#define PACKAGE "%PACKAGE%"
1998-10-03 05:39:55 +00:00
/* Define to the address where bug reports for this package should be sent. */
#define PACKAGE_BUGREPORT "bug-make@gnu.org"
/* Define to the full name of this package. */
#define PACKAGE_NAME "GNU make"
/* Define to the home page for this package. */
#define PACKAGE_URL "http://www.gnu.org/software/make/"
/* Define to the version of this package. */
#define PACKAGE_VERSION "%VERSION%"
/* Define to the character that separates directories in PATH. */
#define PATH_SEPARATOR_CHAR ';'
1998-10-03 05:39:55 +00:00
/* Define as the return type of signal handlers ('int' or 'void'). */
#define RETSIGTYPE void
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to the name of the SCCS 'get' command. */
#define SCCS_GET "echo no sccs get"
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define this if the SCCS 'get' command understands the '-G<file>' option. */
/* #undef SCCS_GET_MINUS_G */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if the 'setvbuf' function takes the buffering type as its
second argument and the buffer pointer as the third, as on System V before
release 3. */
/* #undef SETVBUF_REVERSED */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* If using the C implementation of alloca, define if you know the
direction of stack growth for your system; otherwise it will be
automatically deduced at run time.
STACK_DIRECTION > 0 => grows toward higher addresses
STACK_DIRECTION < 0 => grows toward lower addresses
STACK_DIRECTION = 0 => direction of growth unknown */
/* #undef STACK_DIRECTION */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if the 'S_IS*' macros in <sys/stat.h> do not work properly. */
/* #undef STAT_MACROS_BROKEN */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you have the ANSI C header files. */
#define STDC_HEADERS 1
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define if struct stat contains a nanoseconds field */
/* #undef ST_MTIM_NSEC */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 on System V Release 4. */
/* #undef SVR4 */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
#ifdef __MINGW32__
#define TIME_WITH_SYS_TIME 1
#endif
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 for Encore UMAX. */
/* #undef UMAX */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 for Encore UMAX 4.3 that has <inq_status/cpustats.h> instead of
<sys/cpustats.h>. */
/* #undef UMAX4_3 */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Version number of package */
#define VERSION "%VERSION%"
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define if using the dmalloc debugging malloc package */
/* #undef WITH_DMALLOC */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if on AIX 3.
System headers sometimes define this.
We just want to avoid a redefinition error message. */
#ifndef _ALL_SOURCE
/* # undef _ALL_SOURCE */
#endif
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Number of bits in a file offset, on hosts where this is settable. */
/* #undef _FILE_OFFSET_BITS */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define for large files, on AIX-style hosts. */
/* #undef _LARGE_FILES */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 1 if on MINIX. */
/* #undef _MINIX */
Wed May 15 10:14:14 CDT 1996 Rob Tulloh <tulloh@tivoli.com> * dir.c: WIN32 does not support inode. For now, fully qualified pathname along with st_mtime will be keys for files. Fixed problem where vpath can be confused when files are added to a directory after the directory has already been read in. The code now attempts to reread the directory if it discovers that the datestamp on the directory has changed since it was cached by make. This problem only seems to occur on WIN32 right now so it is lumped under port #ifdef WIN32. * function.c: WIN32: call subproc library (CreateProcess()) instead of fork/exec. * job.c: WIN32: Added the code to do fork/exec/waitpid style processing on WIN32 systems via calls to subproc library. * main.c: WIN32: Several things added here. First, there is code for dealing with PATH and SHELL defaults. Make tries to figure out if the user has %PATH% set in the environment and sets it to %Path% if it is not set already. Make also looks to see if sh.exe is anywhere to be found. Code path through job.c will change based on existence of a working Bourne shell. The checking for default shell is done twice: once before makefiles are read in and again after. Fall back to MSDOS style execution mode if no sh.exe is found. Also added some debug support that allows user to pause make with -D switch and attach a debugger. This is especially useful for debugging recursive calls to make where problems appear only in the sub-make. * make.h: WIN32: A few macros and header files for WIN32 support. * misc.c: WIN32: Added a function end_of_token_w32() to assist in parsing code in read.c. * read.c: WIN32: Fixes similar to MSDOS which allow colon to appear in filenames. Use of colon in filenames would otherwise confuse make. * remake.c: WIN32: Added include of io.h to eliminate compiler warnings. Added some code to default LIBDIR if it is not set on WIN32. * variable.c: WIN32: Added support for detecting Path/PATH and converting them to semicolon separated lists for make's internal use. New function sync_Path_environment() which is called in job.c and function.c before creating a new process. Caller must set Path in environment since we don't have fork() to do this for us. * vpath.c: WIN32: Added detection for filenames containing forward or backward slashes. * NMakefile: WIN32: Visual C compatible makefile for use with nmake. Use this to build GNU make the first time on Windows NT or Windows 95. * README.WIN32: WIN32: Contains some helpful notes. * build_w32.bat: WIN32: If you don't like nmake, use this the first time you build GNU make on Windows NT or Windows 95. * config.h.WIN32: WIN32 version of config.h * subproc.bat: WIN32: A bat file used to build the subproc library from the top-level NMakefile. Needed because WIndows 95 (nmake) doesn't allow you to cd in a make rule. * w32/include/dirent.h * w32/compat/dirent.c: WIN32: opendir, readdir, closedir, etc. * w32/include/pathstuff.h: WIN32: used by files needed functions defined in pathstuff.c (prototypes). * w32/include/sub_proc.h: WIN32: prototypes for subproc.lib functions. * w32/include/w32err.h: WIN32: prototypes for w32err.c. * w32/pathstuff.c: WIN32: File and Path/Path conversion functions. * w32/subproc/build.bat: WIN32: build script for subproc library if you don't wish to use nmake. * w32/subproc/NMakefile: WIN32: Visual C compatible makefile for use with nmake. Used to build subproc library. * w32/subproc/misc.c: WIN32: subproc library support code * w32/subproc/proc.h: WIN32: subproc library support code * w32/subproc/sub_proc.c: WIN32: subproc library source code * w32/subproc/w32err.c: WIN32: subproc library support code
1996-05-22 21:51:45 +00:00
/* Define to 2 if the system does not provide POSIX.1 features except with
this defined. */
/* #undef _POSIX_1_SOURCE */
1998-10-03 05:39:55 +00:00
/* Define to 1 if you need to in order for 'stat' and other things to work. */
/* #undef _POSIX_SOURCE */
1998-07-30 20:54:47 +00:00
/* Define to empty if 'const' does not conform to ANSI C. */
/* #undef const */
#include <sys/types.h>
/* Define to 'int' if <sys/types.h> doesn't define. */
#define gid_t int
/* Define to 'int' if <sys/types.h> does not define. */
/* GCC 4.x reportedly defines pid_t. */
#ifndef _PID_T_
#ifdef _WIN64
#define pid_t __int64
#else
#define pid_t int
#endif
#endif
/* Define to 'int' if <sys/types.h> doesn't define. */
#define uid_t int
/* Define uintmax_t if not defined in <stdint.h> or <inttypes.h>. */
#if !HAVE_STDINT_H && !HAVE_INTTYPES_H
#define uintmax_t unsigned long
#endif
/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
/* #undef HAVE_SYS_WAIT_H */
/* Define to the installation directory for locales. */
#define LOCALEDIR ""
1998-07-30 20:54:47 +00:00
/*
* Refer to README.W32 for info on the following settings
*/
1998-07-30 20:54:47 +00:00
/*
* If you have a shell that does not grok 'sh -c quoted-command-line'
* correctly, you need this setting. Please see below for specific
* shell support.
1998-07-30 20:54:47 +00:00
*/
/*#define BATCH_MODE_ONLY_SHELL 1 */
1998-07-30 20:54:47 +00:00
/*
* Define if you have the Cygnus "Cygwin" GNU Windows32 tool set.
* Do NOT define BATCH_MODE_ONLY_SHELL if you define HAVE_CYGWIN_SHELL
*/
/*#define HAVE_CYGWIN_SHELL 1 */
/*
* Define if you have the MKS tool set or shell. Do NOT define
* BATCH_MODE_ONLY_SHELL if you define HAVE_MKS_SHELL
1998-07-30 20:54:47 +00:00
*/
/*#define HAVE_MKS_SHELL 1 */
1998-07-30 20:54:47 +00:00
/*
* Enforce the mutual exclusivity restriction.
*/
#ifdef HAVE_MKS_SHELL
#undef BATCH_MODE_ONLY_SHELL
#endif
#ifdef HAVE_CYGWIN_SHELL
#undef BATCH_MODE_ONLY_SHELL
#endif
Support --output-sync on MS-Windows. w32/compat/posixfcn.c: New file, with emulations of Posix functions and Posix functionality for MS-Windows. w32/subproc/sub_proc.c: Include io.h. (process_noinherit): New function, forces a file descriptor to not be inherited by child processes. (process_easy): Accept two additional arguments, and use them to set up the standard output and standard error handles of the child process. w32/include/sub_proc.h (process_easy): Adjust prototype. (process_noinherit): Add prototype. read.c [WINDOWS32]: Include windows.h and sub_proc.h. makeint.h (LOCALEDIR) [WINDOWS32}: Define to NULL if not defined. This is needed because the MS-Windows build doesn't have a canonical place for LOCALEDIR. (WIN32_LEAN_AND_MEAN) [WINDOWS32]: Define, to avoid getting from windows.h header too much stuff that could conflict with the code. main.c <sync_mutex>: New static variable. <switches>: Add support for "--sync-mutex" switch. (decode_output_sync_flags): Decode the --sync-mutex= switch. (prepare_mutex_handle_string) [WINDOWS32]: New function. (main): Add "output-sync" to .FEATURES. job.h (CLOSE_ON_EXEC) [WINDOWS32]: Define to call process_noinherit. (F_GETFD, F_SETLKW, F_WRLCK, F_UNLCK, struct flock) [WINDOWS32]: New macros. (RECORD_SYNC_MUTEX): New macro, a no-op for Posix platforms. (sync_handle_t): New typedef. job.c <sync_handle>: Change type to sync_handle_t. (FD_NOT_EMPTY): Seek to the file's end. Suggested by Frank Heckenbach <f.heckenbach@fh-soft.de>. (pump_from_tmp_fd) [WINDOWS32]: Switch to_fd to binary mode for the duration of this function, and then change back before returning. (start_job_command) [WINDOWS32]: Support output_sync mode on MS-Windows. Use a system-wide mutex instead of locking stdout/stderr. Call process_easy with two additional arguments: child->outfd and child->errfd. (exec_command) [WINDOWS32]: Pass two additional arguments, both -1, to process_easy, to adjust for the changed function signature. function.c (windows32_openpipe) [WINDOWS32]: This function now returns an int, which is -1 if it fails and zero otherwise. It also calls 'error' instead of 'fatal', to avoid exiting prematurely. (func_shell_base) [WINDOWS32]: Call perror_with_name if windows32_openpipe fails, now that it always returns. This avoids a compiler warning that error_prefix is not used in the MS-Windows build. config.h.W32.template (OUTPUT_SYNC): Define. build_w32.bat: Add w32/compat/posixfcn.c to compilation and linking commands. From Frank Heckenbach <f.heckenbach@fh-soft.de>: job.c (sync_output): Don't discard the output if acquire_semaphore fails; instead, dump the output unsynchronized.
2013-04-27 11:20:49 +00:00
#define OUTPUT_SYNC