Convert GNU make to use the gnulib portability library

Move content from glob/* and config/* into standard GNU directory
locations lib/* and m4/*.

Install the gnulib bootstrap script and its configuration file, and
create a bootstrap.bat file for Windows.  Update the README.git file
with new requirements and instructions for building from Git.

At this point we only install the alloca, getloadavg, and FDL modules
from gnulib.  We keep our old glob/fnmatch implementation since the
gnulib versions require significant amounts of infrastructure which
doesn't exist on Windows yet.  Further work is required here.

Due to a problem with gnulib's version of getloadavg, we need to bump
the minimum required version of automake to 1.16.1 unfortunately.

* README.git: Update instructions
* NEWS: Move developer news to a separate section
* configure.ac: Update for use with gnulib modules

* bootstrap: Bootstrap from Git workspace (import from gnulib)
* bootstrap.conf: Bootstrap configuration for GNU make
* bootstrap.bat: Bootstrap from Git workspace for Windows
* gl/modules/make-glob: Support our local fnmatch/glob implementation

* config/acinclude.m4: Move to m4/
* config/dospaths.m4: Move to m4/
* glob/fnmatch.c: Move to lib/
* glob/fnmatch.h.in: Move to lib/
* glob/glob.c: Move to lib/
* glob/glob.h.in: Move to lib/

* Makefile.am: Update for new directories
* build.template: Update for new directories
* build_w32.bat: Update for new directories
* builddos.bat: Update for new directories
* maintMakefile: Update for new directories
* makefile.com: Update for new directories
* mk/Amiga.mk: Update for new directories
* mk/Posix.mk.in: Update for new directories
* mk/VMS.mk: Update for new directories
* mk/Windows32.mk: Update for new directories
* mk/msdosdjgpp.mk: Update for new directories

* po/LINGUAS: One language per line (needed by gnulib)

* INSTALL: Remove (obtained from gnulib)
* src/alloca.c: Remove (obtained from gnulib)
* src/getloadavg.c: Remove (obtained from gnulib)
* po/Makevars: Remove (created by bootstrap)
* config/*: Remove leftover files
* glob/*: Remove leftover files

.gitignore

@@ -10,20 +10,22 @@ TAGS
 
 # Configure artifacts
 ABOUT-NLS
+INSTALL
 Makefile
 Makefile.in
 Basic.mk
 aclocal.m4
 autom4te.cache
+build-aux/
 config.cache
 config.h
 config.h.in
 config.log
 config.status
 configure
+/mk/Posix.mk
 stamp-h1
 .dirstamp
-mk/Posix.mk
 
 # Build artifacts
 .deps
@@ -31,6 +33,7 @@ gmk-default.h
 loadavg
 make
 *.o
+*.a
 *.exe
 *.dll.a
 *.obj

Basic.mk.template

@@ -8,7 +8,7 @@
 # Once you have a GNU make program created, you can use it with this makefile
 # to keep it up to date if you make changes, as:
 #
-#   make.exe -f Makew32.mk
+#   make.exe -f Basic.mk
 #
 # Copyright (C) 2017-2018 Free Software Foundation, Inc.
 # This file is part of GNU Make.
@@ -29,7 +29,7 @@
 all:
 
 src = src/
-glob = glob/
+lib = lib/
 
 make_SOURCES = %make_SOURCES%
 glob_SOURCES = %glob_SOURCES%
@@ -57,6 +57,8 @@ PROG = $(OUTDIR)make$(EXEEXT)
 
 prog_SOURCES = $(make_SOURCES) $(remote_SOURCES)
 
+BUILT_SOURCES =
+
 OBJECTS = $(patsubst %.c,$(OUTDIR)%.$(OBJEXT),$(prog_SOURCES))
 
 OBJDIRS = $(addsuffix .,$(sort $(dir $(OBJECTS))))
@@ -69,7 +71,7 @@ CPPFLAGS =
 CFLAGS = -g -O2
 LDFLAGS =
 
-extra_CPPFLAGS = -DHAVE_CONFIG_H -I$(OUTDIR)src -I$(SRCDIR)/src \
+extra_CPPFLAGS = -DHAVE_CONFIG_H -I$(OUTDIR)src -I$(SRCDIR)/src -I$(OUTDIR)lib -I$(SRCDIR)/lib \
 	-DLIBDIR=\"$(LIBDIR)\" -DINCLUDEDIR=\"$(INCLUDEDIR)\" -DLOCALEDIR=\"$(LOCALDIR)\"
 extra_CFLAGS =
 extra_LDFLAGS = $(extra_CFLAGS) $(CFLAGS)
@@ -93,7 +95,7 @@ MKDIR = mkdir -p
 MKDIR.cmd = $(MKDIR) $@
 
 RM = rm -f
-RM.cmd = $(RM) $(OBJECTS) $(PROG)
+RM.cmd = $(RM) $(OBJECTS) $(PROG) $(BUILT_SOURCES)
 
 # Load overrides for the above variables.
 include $(firstword $(wildcard $(SRCDIR)/mk/$(lastword $(subst -, ,$(MAKE_HOST)).mk) $(OUTDIR)mk/Posix.mk $(SRCDIR)/mk/Posix.mk))
@@ -110,7 +112,7 @@ $(PROG): $(OBJECTS)
 $(OBJECTS): $(OUTDIR)%.$(OBJEXT): %.c
 	$(COMPILE.cmd)
 
-$(OBJECTS): | $(OBJDIRS)
+$(OBJECTS): | $(OBJDIRS) $(BUILT_SOURCES)
 
 $(OBJDIRS):
 	$(MKDIR.cmd)
@@ -121,4 +123,8 @@ check: $(PROG)
 clean:
 	$(RM.cmd)
 
+$(filter %.h,$(BUILT_SOURCES)): %.h : %.in.h
+	$(RM) $<
+	$(CP.cmd)
+
 .PHONY: all check clean

INSTALL

@@ -1,239 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
-Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Installation From Git
-=====================
-
-If you are trying to build GNU make from a Git clone rather than a
-downloaded source distribution file, see README.git for steps you
-must take to configure your workspace before you can use the
-instructions below.
-
-
-Basic Installation
-==================
-
-These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PREFIX'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PREFIX', the package will
-use PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.

Makefile.am

@@ -17,11 +17,11 @@
 # this program.  If not, see <http://www.gnu.org/licenses/>.
 
 AUTOMAKE_OPTIONS = dist-bzip2 silent-rules std-options subdir-objects nostdinc
-ACLOCAL_AMFLAGS = -I config
+ACLOCAL_AMFLAGS = -I m4
 
 MAKE_HOST =	@MAKE_HOST@
 
-SUBDIRS =	glob config po doc
+SUBDIRS =	lib po doc
 
 bin_PROGRAMS =	make
 include_HEADERS = src/gnumake.h
@@ -38,12 +38,6 @@ make_SRCS =	src/ar.c src/arscan.c src/commands.c src/commands.h \
 		src/rule.c src/rule.h src/signame.c src/strcache.c \
 		src/variable.c src/variable.h src/version.c src/vpath.c
 
-glob_SRCS =	glob/fnmatch.c glob/fnmatch.h glob/glob.c glob/glob.h
-
-loadavg_SRCS =	src/getloadavg.c
-
-alloca_SRCS =	src/alloca.c
-
 w32_SRCS =	src/w32/pathstuff.c src/w32/w32os.c src/w32/compat/dirent.c \
 		src/w32/compat/posixfcn.c src/w32/include/dirent.h \
 		src/w32/include/dlfcn.h src/w32/include/pathstuff.h \
@@ -56,16 +50,23 @@ vms_SRCS =	src/vms_exit.c src/vms_export_symbol.c src/vms_progname.c \
 
 amiga_SRCS =	src/amiga.c src/amiga.h
 
+glob_SRCS =	lib/fnmatch.c lib/fnmatch.h lib/glob.c lib/glob.h
+
+alloca_SRCS =	lib/alloca.c
+
+loadavg_SRCS =	lib/getloadavg.c
+
 make_SOURCES =	$(make_SRCS)
 EXTRA_make_SOURCES = $(amiga_SRCS) $(vms_SRCS)
 
-make_LDADD =	$(GUILE_LIBS) $(LIBOBJS) $(ALLOCA) $(GLOBLIB) \
+make_LDADD =	$(LIBOBJS) $(GUILE_LIBS) lib/libgnu.a $(GETLOADAVG_LIBS) \
-		@GETLOADAVG_LIBS@ @LIBINTL@
+		@LIBINTL@
 
 localedir =	$(datadir)/locale
 
-AM_CPPFLAGS =	-Isrc -I$(srcdir)/src $(GLOBINC) -DLIBDIR=\"$(libdir)\" \
+AM_CPPFLAGS =	-Isrc -I$(top_srcdir)/src -Ilib -I$(top_srcdir)/lib \
-		-DINCLUDEDIR=\"$(includedir)\" -DLOCALEDIR=\"$(localedir)\"
+		-DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" \
+		-DLOCALEDIR=\"$(localedir)\"
 
 AM_CFLAGS =	$(GUILE_CFLAGS)
 
@@ -88,6 +89,8 @@ mk_FILES =	Basic.mk mk/msdosdjgpp.mk mk/Amiga.mk mk/VMS.mk mk/Windows32.mk
 # We don't need this, since the standard automake output will do.
 #mk/Posix.mk.in
 
+m4_FILES =	m4/gnulib-cache.m4
+
 test_FILES =	tests/run_make_tests tests/run_make_tests.bat \
 		tests/run_make_tests.pl tests/test_driver.pl \
 		tests/config-flags.pm.in tests/config_flags_pm.com \
@@ -102,49 +105,20 @@ EXTRA_DIST =	ChangeLog README build.sh.in $(man_MANS) \
 		README.VMS makefile.com src/config.h-vms src/vmsjobs.c \
 		vms_export_symbol_test.com \
 		src/gmk-default.scm src/gmk-default.h \
-		$(mk_FILES) $(test_FILES)
+		$(mk_FILES) $(m4_FILES) $(test_FILES)
 
 
 # This is built during configure, but behind configure's back
 
 DISTCLEANFILES = build.sh
 
-# --------------- Local INSTALL Section
-
-# If necessary, change the gid of the app and turn on the setgid flag.
-#
-
-# Whether or not make needs to be installed setgid.
-# The value should be either 'true' or 'false'.
-# On some systems, the getloadavg function (used to implement the '-l'
-# switch) will not work unless make is installed setgid kmem.
-#
-inst_setgid = @NEED_SETGID@
-
-# Install make setgid to this group so it can get the load average.
-#
-inst_group = @KMEM_GROUP@
-
-install-exec-local:
-	@if $(inst_setgid); then \
-	   app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \
-	   if chgrp $(inst_group) $$app && chmod g+s $$app; then \
-	     echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \
-	   else \
-	     echo "$$app needs to be owned by group $(inst_group) and setgid;"; \
-	     echo "otherwise the '-l' option will probably not work."; \
-	     echo "You may need special privileges to complete the installation"; \
-	     echo "of $$app."; \
-	   fi; \
-	 else true; fi
-
 # --------------- Generate the Guile default module content
 
 src/guile.$(OBJEXT): src/gmk-default.h
-src/gmk-default.h: $(srcdir)/src/gmk-default.scm
+src/gmk-default.h: $(top_srcdir)/src/gmk-default.scm
 	(echo 'static const char *const GUILE_module_defn = " '\\ \
 	  && sed -e 's/;.*//' -e '/^[ \t]*$$/d' -e 's/"/\\"/g' -e 's/$$/ \\/' \
-		 $(srcdir)/src/gmk-default.scm \
+		 $(top_srcdir)/src/gmk-default.scm \
 	  && echo '";') > src/gmk-default.h
 
 # --------------- Local DIST Section
@@ -152,7 +126,7 @@ src/gmk-default.h: $(srcdir)/src/gmk-default.scm
 # Install the mk and tests subdirectories
 #
 dist-hook:
-	(cd $(srcdir); \
+	(cd $(top_srcdir); \
 	 sub=`find tests/scripts -follow \( -name .git -o -name .deps -o -name work -o -name .gitignore -o -name \*.orig -o -name \*.rej -o -name \*~ -o -name \*.out -o -name Makefile \) -prune -o -type f -print`; \
 	 tar chf - $$sub) \
 	| (cd $(distdir); tar xfBp -)
@@ -160,7 +134,7 @@ dist-hook:
 
 # --------------- Local CHECK Section
 
-check-local: check-regression check-loadavg
+check-local: check-regression
 	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
 	dashes=`echo "$$banner" | sed s/./=/g`; \
 	echo; \
@@ -169,20 +143,6 @@ check-local: check-regression check-loadavg
 	echo "$$dashes"; \
 	echo
 
-.PHONY: check-loadavg check-regression
-
-check-loadavg: loadavg$(EXEEXT)
-	@echo The system uptime program believes the load average to be:
-	-uptime
-	@echo The GNU load average checking code thinks:
-	-./loadavg$(EXEEXT)
-
-# The loadavg function is invoked during "make check" to test getloadavg.
-check_PROGRAMS = loadavg
-nodist_loadavg_SOURCES = $(loadavg_SRCS)
-loadavg_CPPFLAGS = -Isrc -I$(srcdir)/src -DTEST
-loadavg_LDADD = @GETLOADAVG_LIBS@
-
 # > check-regression
 #
 # Look for the make test suite, and run it if found and we can find perl.
@@ -191,25 +151,27 @@ loadavg_LDADD = @GETLOADAVG_LIBS@
 #
 MAKETESTFLAGS =
 
+.PHONY: check-regression
+
 check-regression: tests/config-flags.pm
-	@if test -f '$(srcdir)/tests/run_make_tests'; then \
+	@if test -f '$(top_srcdir)/tests/run_make_tests'; then \
 	  ulimit -n 128; \
 	  if $(PERL) -v >/dev/null 2>&1; then \
-	    case `cd '$(srcdir)'; pwd` in `pwd`) : ;; \
+	    case `cd '$(top_srcdir)'; pwd` in `pwd`) : ;; \
 	      *) test -d tests || mkdir tests; \
 		 rm -f srctests; \
-		 if ln -s '$(srcdir)/tests' srctests; then \
+		 if ln -s '$(top_srcdir)/tests' srctests; then \
 		   for f in run_make_tests run_make_tests.pl test_driver.pl scripts jhelp.pl; do \
 		     rm -f tests/$$f; ln -s ../srctests/$$f tests; \
 		   done; fi ;; \
 	    esac; \
-	    echo "cd tests && $(PERL) ./run_make_tests.pl -srcdir $(abs_srcdir) -make ../make$(EXEEXT) $(MAKETESTFLAGS)"; \
+	    echo "cd tests && $(PERL) ./run_make_tests.pl -srcdir $(abs_top_srcdir) -make ../make$(EXEEXT) $(MAKETESTFLAGS)"; \
-	    cd tests && $(PERL) ./run_make_tests.pl -srcdir '$(abs_srcdir)' -make '../make$(EXEEXT)' $(MAKETESTFLAGS); \
+	    cd tests && $(PERL) ./run_make_tests.pl -srcdir '$(abs_top_srcdir)' -make '../make$(EXEEXT)' $(MAKETESTFLAGS); \
 	  else \
 	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
 	  fi; \
 	else \
-	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
+	  echo "Can't find the GNU Make test suite ($(top_srcdir)/tests)."; \
 	fi
 
 

NEWS

@@ -24,8 +24,8 @@ http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=108&set
     foo := $(shell echo '\#')
   Now this latter will resolve to "\#".  If you want to write makefiles
   portable to both versions, assign the number sign to a variable:
-    C := \#
+    H := \#
-    foo := $(shell echo '$C')
+    foo := $(shell echo '$H')
   This was claimed to be fixed in 3.81, but wasn't, for some reason.
   To detect this change search for 'nocomment' in the .FEATURES variable.
 
@@ -36,16 +36,13 @@ http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=108&set
   add a trailing space.
 
 * WARNING: Backward-incompatibility!
-  On Linux, and other systems that provide a /proc/loadavg with similar
+  On Linux, and any other systems that provide a /proc/loadavg with similar
   syntax, the -l/--load-average option will use the contents of that file to
   determine how many jobs are running at any given instant, and compare that
   value to the load value requested.  This allows usage such as "-j -lN" for
-  N-processor systems with less fear of overload.
+  N-processor systems without fear of overload.
   Patch provided by Sven C. Dack <sven.c.dack@sky.com>
 
-* Rework the source distribution to move source files into the src/*
-  subdirectory.  This aligns with modern best practices in GNU.
-
 * The previous limit of 63 jobs under -jN on MS-Windows is now
   increased to 4095.  That limit includes the subprocess started by
   the $(shell) function.
@@ -55,6 +52,14 @@ http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=108&set
 
 * A new option -E has been added as a short alias for --eval.
 
+GNU make Developer News
+
+* Import the GNU standard bootstrap script to replace the hand-rolled
+  "make update" method for building code from a GNU make Git repository.
+
+* Rework the source distribution to move source files into the src/*
+  subdirectory.  This aligns with modern best practices in GNU.
+
 
 Version 4.2.1 (10 Jun 2016)
 

README.git

@@ -73,62 +73,66 @@ It should build with any C compiler conforming to the ANSI C89 / ISO C90
 standard.
 
 
-Building From Git
+Building From Git for POSIX
------------------
+---------------------------
+
+To build GNU make from Git on POSIX systems such as GNU/Linux, you will
+need to install the following extra software:
+
+* autoconf
+* automake >= 1.16.1
+* gettext
+* autopoint
+* pkg-config
+* texinfo (for makeinfo)
+
+And any tools that those utilities require (GNU m4, Perl, etc.)
+
+GNU make requires gnulib to provide some facilities.  If you want to maintain
+a local installation of gnulib you can set GNULIB_SRCDIR to point to it.
+Otherwise, ./bootstrap will obtain a clone for you.
+
+Unfortunately due to issues with gnulib's getloadavg, you must have automake
+1.16.1 or above.  This version is not yet widely available in GNU/Linux
+package managers.  If you need to install from source be sure to set
+ACLOCAL_PATH to point to the pkg-config location (e.g., /usr/share/aclocal).
 
-To build GNU make from Git, you will need Autoconf, Automake, and
-Gettext, and any tools that those utilities require (GNU m4, Perl,
-etc.).  See the configure.ac file to find the minimum versions of each
-of these tools.  You will also need a copy of wget and gnulib.
 
 When building from Git you must build in the source directory: "VPATH
 builds" from remote directories are not supported.  Once you've created
 a distribution, of course, you can unpack it and do a VPATH build from
 there.
 
-After checking out the code, you will need to perform these steps to get
+After checking out the code, you will need to run the bootstrap script:
-to the point where you can run "make".
 
- 1) $ autoreconf -i
+ $ ./bootstrap
-
-    This rebuilds all the things that need rebuilding, installing
-    missing files as symbolic links.
-
-    You may get warnings here about missing files like README, etc.
-    Ignore them, they are harmless.
-
- 2) $ ./configure
-
-    Generate a Makefile
-
- 3) $ make update
-
-    Use wget to retrieve various other files that GNU make relies on,
-    but does not keep in its own source tree.
-
-    NB: You may need GNU make to correctly perform this step; if you use
-    a platform-local make you may get problems with missing files in doc/.
 
 At this point you have successfully brought your Git copy of the GNU
 make source directory up to the point where it can be treated
 more-or-less like the official package you would get from ftp.gnu.org.
 That is, you can just run:
 
-  $ make && make check && make install
+  $ ./configure
+  $ make check
+  $ make install
 
 to build and install GNU make.
 
 
-Windows builds from Git
+Building From Git for Windows
------------------------
+-----------------------------
 
 If you have a UNIX emulation like CYGWIN you can opt to run the general
-build procedure above; it will work.  Be sure to read
+build procedure above; it will work.  Consult README.W32.template for
-README.W32.template for information on options you might want to use
+information on options you might want to use when running ./configure.
-when running ./configure.
 
-If you can't or don't want to do that, then rename the file
+If you can't or don't want to do that, then first run the .\bootstrap.bat
-README.W32.template to README.W32 and follow those instructions.
+script to prime your Git workspace:
+
+  > .\bootstrap.bat
+
+Next, rename the file README.W32.template to README.W32 and follow those
+instructions.
 
 
 Creating a Package
@@ -277,16 +281,10 @@ prerequisites are available of course).
 This list is eminently suitable for a quick swipe o' the mouse and a
 swift click o' mouse-2 into an xterm.  Go for it!
 
-autoreconf -i
+For a debugging version:
-./configure
-make update
-make
-make check
 
-Or, for a debugging version:
+./bootstrap && ./configure CFLAGS=-g && make check
 
-autoreconf -i && ./configure CFLAGS=-g && make update && make && make check
+For a release version
 
-Or, all-in-one:
+./bootstrap && ./configure && make check
-
-autoreconf -i && ./configure && make update && make && make check

bootstrap.bat

@@ -0,0 +1,34 @@
+@echo off
+:: Copyright (C) 2018 Free Software Foundation, Inc.
+:: This file is part of GNU Make.
+::
+:: GNU Make is free software; you can redistribute it and/or modify it under
+:: the terms of the GNU General Public License as published by the Free
+:: Software Foundation; either version 3 of the License, or (at your option)
+:: any later version.
+::
+:: GNU Make is distributed in the hope that it will be useful, but WITHOUT
+:: ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+:: FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for.
+:: more details.
+::
+:: You should have received a copy of the GNU General Public License along
+:: with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+setlocal
+set "svurl=https://git.savannah.gnu.org/cgit"
+set "gnuliburl=%svurl%/gnulib.git/plain"
+
+call :Download lib getloadavg.c
+call :Download lib intprops.h
+goto :Done
+
+:Download
+echo Downloading %1\%2
+curl -sS -o %1\%2 "%gnuliburl%/%1/%2"
+if ERRORLEVEL 1 exit /b 1
+goto :EOF
+
+:Done
+echo Done.  Run buld_w32.bat to build GNU make.
+goto :EOF

bootstrap.conf

@@ -0,0 +1,51 @@
+# Bootstrap configuration.                                   -*-shell-script-*-
+
+# Copyright (C) 2018 Free Software Foundation, Inc.
+
+# GNU Make is free software: you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 3 of the License, or (at your option)
+# any later version.
+
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# Allow bootstrap to know that this is not a package
+checkout_only_file=README.git
+
+# Additional xgettext options to use.  Use "\\\newline" to break lines.
+# Ensure that all our magical output macros are correctly marked as
+# C (printf) format strings.
+XGETTEXT_OPTIONS='\\\
+ --from-code=UTF-8\\\
+ --flag=_:1:pass-c-format\\\
+ --flag=N_:1:pass-c-format\\\
+ --flag=DB:2:c-format --flag=DBF:2:c-format --flag=DBS:2:c-format\\\
+ --flag=O:3:c-format  --flag=OSN:3:c-format --flag=ONS:3:c-format\\\
+ --flag=OS:3:c-format --flag=OSS:3:c-format --flag=OSSS:3:c-format\\\
+ --flag=ON:3:c-format --flag=ONN:3:c-format\\\
+'
+
+# We manage our own .gitignore files
+vc_ignore=
+
+# Build prerequisites
+buildreq="\
+autoconf   2.69
+automake   1.16.1
+"
+
+gnulib_name=libgnu
+gnulib_files=doc/make-stds.texi
+
+gnulib_modules="\
+alloca
+fdl
+getloadavg
+host-cpu-c-abi
+make-glob"

build.template

@@ -20,22 +20,26 @@
 
 # See Makefile.in for comments describing these variables.
 
-srcdir='@srcdir@'
+LIBOBJDIR=lib/
-CC='@CC@'
+U=
-CFLAGS='@CFLAGS@ @GUILE_CFLAGS@'
+
-CPPFLAGS='@CPPFLAGS@'
+top_srcdir="@top_srcdir@"
-LDFLAGS='@AM_LDFLAGS@ @LDFLAGS@'
+CC="@CC@"
-ALLOCA='@ALLOCA@'
+CFLAGS="@CFLAGS@ @GUILE_CFLAGS@"
-LOADLIBES='@LIBS@ @GUILE_LIBS@ @LIBINTL@'
+CPPFLAGS="@CPPFLAGS@"
-eval extras=\'@LIBOBJS@\'
+LDFLAGS="@AM_LDFLAGS@ @LDFLAGS@"
-REMOTE='@REMOTE@'
+ALLOCA="@ALLOCA@"
-GLOBLIB='@GLOBLIB@'
+LOADLIBES="@LIBS@ @GUILE_LIBS@ @LIBINTL@"
-PATH_SEPARATOR='@PATH_SEPARATOR@'
+LIBOBJS="@LIBOBJS@"
-OBJEXT='@OBJEXT@'
+REMOTE="@REMOTE@"
-EXEEXT='@EXEEXT@'
+OBJEXT="@OBJEXT@"
+EXEEXT="@EXEEXT@"
+
+# Use our old-style glob implementation
+test x"@USE_SYSTEM_GLOB@" = xno && LIBOBJS="${LIBOBJS} ${LIBOBJDIR}fnmatch.$OBJEXT ${LIBOBJDIR}glob.$OBJEXT"
 
 # Common prefix for machine-independent installed files.
-prefix='@prefix@'
+prefix="@prefix@"
 # Common prefix for machine-dependent installed files.
 exec_prefix=`eval echo @exec_prefix@`
 # Directory to find libraries in for '-lXXX'.
@@ -45,24 +49,29 @@ includedir=${prefix}/include
 
 localedir=${prefix}/share/locale
 
-defines="-DLOCALEDIR=\"${localedir}\" -DLIBDIR=\"${libdir}\" -DINCLUDEDIR=\"${includedir}\""' @DEFS@'
+defines="-DLOCALEDIR=\"${localedir}\" -DLIBDIR=\"${libdir}\" -DINCLUDEDIR=\"${includedir}\" @DEFS@"
 
 # Exit as soon as any command fails.
 set -e
 
 # These are all the objects we need to link together.
-objs="%objs% src/remote-${REMOTE}.${OBJEXT} ${extras} ${ALLOCA}"
+objs="%objs% src/remote-${REMOTE}.${OBJEXT} ${LIBOBJS}"
 
-if [ x"$GLOBLIB" != x ]; then
+case $LIBOBJS in
-  objs="$objs %globobjs%"
+    (*alloca*) cp "$top_srcdir"/lib/alloca.in.h lib/alloca.h ;;
-  globinc=-I${srcdir}/glob
+esac
-fi
+case $LIBOBJS in
+    (*fnmatch*) cp "$top_srcdir"/lib/fnmatch.in.h lib/fnmatch.h ;;
+esac
+case $LIBOBJS in
+    (*glob*) cp "$top_srcdir"/lib/glob.in.h lib/glob.h ;;
+esac
 
 # Compile the source files into those objects.
 for file in `echo ${objs} | sed 's/\.'${OBJEXT}'/.c/g'`; do
   echo compiling ${file}...
   $CC $defines $CPPFLAGS $CFLAGS \
-      -c -Isrc -I${srcdir}/src ${globinc} ${srcdir}/$file
+      -c -Isrc -I"$top_srcdir"/src -Ilib -I"$top_srcdir"/lib "$top_srcdir"/$file
 done
 
 # The object files were actually all put in the current directory.

build_w32.bat

@@ -179,7 +179,7 @@ mkdir %OUTDIR%\src
 mkdir %OUTDIR%\src\w32
 mkdir %OUTDIR%\src\w32\compat
 mkdir %OUTDIR%\src\w32\subproc
-mkdir %OUTDIR%\glob
+mkdir %OUTDIR%\lib
 
 if "%GUILE%" == "Y" call :ChkGuile
 
@@ -189,6 +189,9 @@ echo Compiling %OUTDIR% version
 if exist src\config.h.W32.template call :ConfigSCM
 copy src\config.h.W32 %OUTDIR%\src\config.h
 
+copy lib\glob.in.h %OUTDIR%\lib\glob.h
+copy lib\fnmatch.in.h %OUTDIR%\lib\fnmatch.h
+
 if exist %OUTDIR%\link.sc del %OUTDIR%\link.sc
 
 call :Compile src\ar
@@ -199,7 +202,6 @@ call :Compile src\dir
 call :Compile src\expand
 call :Compile src\file
 call :Compile src\function
-call :Compile src\getloadavg
 call :Compile src\getopt
 call :Compile src\getopt1
 call :Compile src\guile GUILE
@@ -226,8 +228,9 @@ call :Compile src\w32\compat\posixfcn
 call :Compile src\w32\subproc\misc
 call :Compile src\w32\subproc\sub_proc
 call :Compile src\w32\subproc\w32err
-call :Compile glob\fnmatch
+call :Compile lib\fnmatch
-call :Compile glob\glob
+call :Compile lib\glob
+call :Compile lib\getloadavg
 
 if not "%COMPILER%" == "gcc" call :Compile src\w32\compat\dirent
 
@@ -257,14 +260,14 @@ if "%COMPILER%" == "gcc" goto GccCompile
 
 :: MSVC Compile
 echo on
-%COMPILER% /nologo /MT /W4 /EHsc %OPTS% /I %OUTDIR%/src /I src /I glob /I src/w32/include /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR%OUTDIR% /Fp%OUTDIR%\%MAKE%.pch /Fo%OUTDIR%\%1.%O% /Fd%OUTDIR%\%MAKE%.pdb %EXTRAS% /c %1.c
+%COMPILER% /nologo /MT /W4 /EHsc %OPTS% /I %OUTDIR%/src /I src /I %OUTDIR%/lib /I lib /I src/w32/include /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR%OUTDIR% /Fp%OUTDIR%\%MAKE%.pch /Fo%OUTDIR%\%1.%O% /Fd%OUTDIR%\%MAKE%.pdb %EXTRAS% /c %1.c
 @echo off
 goto CompileDone
 
 :GccCompile
 :: GCC Compile
 echo on
-%COMPILER% -mthreads -Wall -std=gnu99 -gdwarf-2 -g3 %OPTS% -I%OUTDIR%/src -I./src -I./glob -I./src/w32/include -DWINDOWS32 -DHAVE_CONFIG_H %EXTRAS% -o %OUTDIR%\%1.%O% -c %1.c
+%COMPILER% -mthreads -Wall -std=gnu99 -gdwarf-2 -g3 %OPTS% -I%OUTDIR%/src -I./src -I%OUTDIR%/lib -I./lib -I./src/w32/include -DWINDOWS32 -DHAVE_CONFIG_H %EXTRAS% -o %OUTDIR%\%1.%O% -c %1.c
 @echo off
 
 :CompileDone

builddos.bat

@@ -26,50 +26,56 @@ rem Where is the srcdir?
 set XSRC=.
 if not "%XSRC%"=="." goto SmallEnv
 if "%1%"=="" goto SrcDone
+if "%1%"=="." goto SrcDone
 set XSRC=%1
+
 if not "%XSRC%"=="%1" goto SmallEnv
 
 :SrcDone
 
-copy /Y %XSRC%/src/configh.dos ./src/config.h
+if not exist src mkdir src
+if not exist lib mkdir lib
 
-if not exist glob mkdir glob
+copy /Y %XSRC%\src\configh.dos .\src\config.h
+
+copy /Y %XSRC%\lib\glob.in.h .\lib\glob.h
+copy /Y %XSRC%\lib\fnmatch.in.h .\lib\fnmatch.h
 
 rem Echo ON so they will see what is going on.
 @echo on
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/commands.c -o commands.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/commands.c -o commands.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/output.c -o output.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/output.c -o output.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/job.c -o job.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/job.c -o job.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/dir.c -o dir.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/dir.c -o dir.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/file.c -o file.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/file.c -o file.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/misc.c -o misc.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/misc.c -o misc.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/main.c -o main.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/main.c -o main.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -DINCLUDEDIR=\"c:/djgpp/include\" -O2 -g %XSRC%/src/read.c -o read.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -DINCLUDEDIR=\"c:/djgpp/include\" -O2 -g %XSRC%/src/read.c -o read.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -DLIBDIR=\"c:/djgpp/lib\" -O2 -g %XSRC%/src/remake.c -o remake.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -DLIBDIR=\"c:/djgpp/lib\" -O2 -g %XSRC%/src/remake.c -o remake.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/rule.c -o rule.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/rule.c -o rule.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/implicit.c -o implicit.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/implicit.c -o implicit.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/default.c -o default.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/default.c -o default.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/variable.c -o variable.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/variable.c -o variable.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/expand.c -o expand.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/expand.c -o eyxpand.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/function.c -o function.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/function.c -o function.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/vpath.c -o vpath.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/vpath.c -o vpath.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/hash.c -o hash.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/hash.c -o hash.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/strcache.c -o strcache.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/strcache.c -o strcache.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/version.c -o version.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/version.c -o version.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/ar.c -o ar.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/ar.c -o ar.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/arscan.c -o arscan.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/arscan.c -o arscan.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/signame.c -o signame.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/signame.c -o signame.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/remote-stub.c -o remote-stub.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/remote-stub.c -o remote-stub.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/getopt.c -o getopt.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/getopt.c -o getopt.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/src/getopt1.c -o getopt1.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/src/getopt1.c -o getopt1.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/glob/glob.c -o glob/glob.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/lib/glob.c -o lib/glob.o
-gcc -c -I%XSRC%/src -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/glob/fnmatch.c -o glob/fnmatch.o
+gcc -c -I./src -I%XSRC%/src -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/lib/fnmatch.c -o lib/fnmatch.o
 @echo off
 echo commands.o > respf.$$$
 for %%f in (job output dir file misc main read remake rule implicit default variable) do echo %%f.o >> respf.$$$
 for %%f in (expand function vpath hash strcache version ar arscan signame remote-stub getopt getopt1) do echo %%f.o >> respf.$$$
-for %%f in (glob/glob glob/fnmatch) do echo %%f.o >> respf.$$$
+for %%f in (lib\glob lib\fnmatch) do echo %%f.o >> respf.$$$
-rem gcc  -c -I%XSRC% -I%XSRC%/glob -DHAVE_CONFIG_H -O2 -g %XSRC%/guile.c -o guile.o
+rem gcc  -c -I./src -I%XSRC% -I./lib -I%XSRC%/lib -DHAVE_CONFIG_H -O2 -g %XSRC%/guile.c -o guile.o
 rem echo guile.o >> respf.$$$
 @echo Linking...
 @echo on

config/.gitignore

@@ -1,12 +0,0 @@
-ar-lib
-compile
-config.guess
-config.rpath
-config.sub
-depcomp
-install-sh
-mdate-sh
-missing
-texinfo.tex
-*.m4
-!dospaths.m4

config/ChangeLog.1

@@ -1,49 +0,0 @@
-2012-01-15  Paul Smith  <psmith@gnu.org>
-
-	* dospaths.m4: Use AC_LANG_PROGRAM to encapsulate the test code.
-	Fixes Savannah bug #35256.  Patch from Sebastian Pipping.
-
-2006-03-09  Paul Smith  <psmith@gnu.org>
-
-	* dospaths.m4: Add MSYS to the list of targets allowing DOS-style
-	pathnames.  Reported by David Ergo <david.ergo@alterface.com>.
-
-2005-07-01  Paul D. Smith  <psmith@gnu.org>
-
-	* Makefile.am (EXTRA_DIST): Added more M4 files to EXTRA_DIST, so
-	users can re-run aclocal.
-
-2003-04-30  Paul D. Smith  <psmith@gnu.org>
-
-	* dospaths.m4: New macro to test for DOS-style pathnames, based on
-	coreutils 5.0 "dos.m4" by Jim Meyering.
-
-2002-04-21  gettextize  <bug-gnu-gettext@gnu.org>
-
-	* codeset.m4: New file, from gettext-0.11.1.
-	* gettext.m4: New file, from gettext-0.11.1.
-	* glibc21.m4: New file, from gettext-0.11.1.
-	* iconv.m4: New file, from gettext-0.11.1.
-	* isc-posix.m4: New file, from gettext-0.11.1.
-	* lcmessage.m4: New file, from gettext-0.11.1.
-	* lib-ld.m4: New file, from gettext-0.11.1.
-	* lib-link.m4: New file, from gettext-0.11.1.
-	* lib-prefix.m4: New file, from gettext-0.11.1.
-	* progtest.m4: New file, from gettext-0.11.1.
-	* Makefile.am: New file.
-
-
-Copyright (C) 2002-2017 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software
-Foundation; either version 3 of the License, or (at your option) any later
-version.
-
-GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.

config/Makefile.am

@@ -1,18 +0,0 @@
-# -*-Makefile-*-, or close enough
-# Copyright (C) 2002-2018 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-#
-# GNU Make is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free
-# Software Foundation; either version 3 of the License, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
-# details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# Autoconf / automake know how to handle this directory.

configure.ac

@@ -21,20 +21,27 @@ AC_INIT([GNU make],[4.2.90],[bug-make@gnu.org])
 AC_PREREQ([2.69])
 
 # Autoconf setup
-AC_CONFIG_AUX_DIR([config])
+AC_CONFIG_AUX_DIR([build-aux])
 AC_CONFIG_SRCDIR([src/vpath.c])
 AC_CONFIG_HEADERS([src/config.h])
 
-# For now all our libobj code is in src/
+AC_CONFIG_LIBOBJ_DIR([lib])
-AC_CONFIG_LIBOBJ_DIR([src])
 
 # Automake setup
 # We have to enable "foreign" because ChangeLog is auto-generated
-AM_INIT_AUTOMAKE([1.15 foreign -Werror -Wall])
+# Automake 1.15 and gnulib don't get along: gnulib has some strange error
+# in the way it handles getloadavg.c which causes make distcheck to fail.
+# http://lists.gnu.org/archive/html/bug-gnulib/2018-06/msg00024.html
+AM_INIT_AUTOMAKE([1.16.1 foreign -Werror -Wall])
 
 # Checks for programs.
 AC_USE_SYSTEM_EXTENSIONS
 AC_PROG_CC
+
+# Configure gnulib
+gl_EARLY
+gl_INIT
+
 AC_PROG_INSTALL
 AC_PROG_RANLIB
 AC_PROG_CPP
@@ -154,8 +161,6 @@ AC_CHECK_FUNCS([strcasecmp strncasecmp strcmpi strncmpi stricmp strnicmp])
 
 # strcoll() is used by the GNU glob library
 AC_FUNC_STRCOLL
-
-AC_FUNC_ALLOCA
 AC_FUNC_CLOSEDIR_VOID
 
 # See if the user wants to add (or not) GNU Guile support
@@ -183,24 +188,6 @@ AS_IF([test "x$with_guile" != xno],
 
 AM_CONDITIONAL([HAVE_GUILE], [test "$have_guile" = yes])
 
-AC_FUNC_GETLOADAVG
-
-# AC_FUNC_GETLOADAVG is documented to set the NLIST_STRUCT value, but it
-# doesn't.  So, we will.
-
-AS_IF([test "$ac_cv_header_nlist_h" = yes],
-[ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <nlist.h>]],
-        [[struct nlist nl;
-          nl.n_name = "string";
-          return 0;]])],
-        [make_cv_nlist_struct=yes],
-        [make_cv_nlist_struct=no])
-  AS_IF([test "$make_cv_nlist_struct" = yes],
-  [ AC_DEFINE([NLIST_STRUCT], [1],
-       [Define to 1 if struct nlist.n_name is a pointer rather than an array.])
-  ])
-])
-
 AC_CHECK_DECLS([sys_siglist, _sys_siglist, __sys_siglist], , ,
   [AC_INCLUDES_DEFAULT
 #include <signal.h>
@@ -412,15 +399,21 @@ AC_CACHE_CHECK([if system libc has GNU glob], [make_cv_sys_gnu_glob],
 #endif],
         [make_cv_sys_gnu_glob=yes],
         [make_cv_sys_gnu_glob=no])])
-AS_IF([test "$make_cv_sys_gnu_glob" = no],
-[ GLOBINC='-I$(srcdir)/glob'
-  GLOBLIB=glob/libglob.a
-])
-AC_SUBST([GLOBINC])
-AC_SUBST([GLOBLIB])
 
 # Tell automake about this, so it can build the right .c files.
-AM_CONDITIONAL([USE_LOCAL_GLOB], [test "$make_cv_sys_gnu_glob" = no])
+AM_CONDITIONAL([USE_SYSTEM_GLOB], [test "$make_cv_sys_gnu_glob" = yes])
+
+# Tell build.sh which to use
+USE_SYSTEM_GLOB="$make_cv_sys_gnu_glob"
+AC_SUBST([USE_SYSTEM_GLOB])
+
+# See if we need a replacement for getloadavg()
+gl_GETLOADAVG
+if test $HAVE_GETLOADAVG = 0; then
+  AC_LIBOBJ([getloadavg])
+  gl_PREREQ_GETLOADAVG
+fi
+gl_STDLIB_MODULE_INDICATOR([getloadavg])
 
 # Let the makefile know what our build host is
 
@@ -505,9 +498,9 @@ AS_IF([test "x$make_cv_load" = xno && test "x$user_load" = xyes],
 ])
 
 # Specify what files are to be created.
-AC_CONFIG_FILES([Makefile glob/Makefile po/Makefile.in config/Makefile \
+AC_CONFIG_FILES([Makefile lib/Makefile po/Makefile.in doc/Makefile \
-                 doc/Makefile tests/config-flags.pm])
+                 tests/config-flags.pm])
-# We don't need this, since the standard automake output will do.
+# We don't need this: the standard automake output suffices for POSIX systems.
 #mk/Posix.mk
 
 # OK, do it!

gl/modules/make-glob

@@ -0,0 +1,44 @@
+Description:
+GNU make version of fnmatch()/glob() functions.  This is a holdover from
+a very old version of the globbing library.
+
+Makefile.am:
+if !USE_SYSTEM_GLOB
+libgnu_a_SOURCES += fnmatch.c
+
+BUILT_SOURCES += fnmatch.h
+
+fnmatch.h: fnmatch.in.h $(top_builddir)/config.status
+	$(AM_V_GEN)rm -f $@-t $@ && \
+	{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+	  cat $(srcdir)/fnmatch.in.h; \
+	} > $@-t && \
+	mv -f $@-t $@
+
+MOSTLYCLEANFILES += fnmatch.h fnmatch.h-t
+
+libgnu_a_SOURCES += glob.c
+
+BUILT_SOURCES += glob.h
+
+glob.h: glob.in.h $(top_builddir)/config.status
+	$(AM_V_GEN)rm -f $@-t $@ && \
+	{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+	  cat $(srcdir)/glob.in.h; \
+	} > $@-t && \
+	mv -f $@-t $@
+
+MOSTLYCLEANFILES += glob.h glob.h-t
+endif
+
+EXTRA_DIST += fnmatch.in.h glob.in.h
+
+
+Include:
+<glob.h>
+
+License:
+LGPLv2+
+
+Maintainer:
+all, glibc

glob/COPYING.LIB

@@ -1,481 +0,0 @@
-		  GNU LIBRARY GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1991 Free Software Foundation, Inc.
-                    675 Mass Ave, Cambridge, MA 02139, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the library GPL.  It is
- numbered 2 because it goes with version 2 of the ordinary GPL.]
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Library General Public License, applies to some
-specially designated Free Software Foundation software, and to any
-other libraries whose authors decide to use it.  You can use it for
-your libraries, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if
-you distribute copies of the library, or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link a program with the library, you must provide
-complete object files to the recipients so that they can relink them
-with the library, after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  Our method of protecting your rights has two steps: (1) copyright
-the library, and (2) offer you this license which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  Also, for each distributor's protection, we want to make certain
-that everyone understands that there is no warranty for this free
-library.  If the library is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original
-version, so that any problems introduced by others will not reflect on
-the original authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that companies distributing free
-software will individually obtain patent licenses, thus in effect
-transforming the program into proprietary software.  To prevent this,
-we have made it clear that any patent must be licensed for everyone's
-free use or not licensed at all.
-
-  Most GNU software, including some libraries, is covered by the ordinary
-GNU General Public License, which was designed for utility programs.  This
-license, the GNU Library General Public License, applies to certain
-designated libraries.  This license is quite different from the ordinary
-one; be sure to read it in full, and don't assume that anything in it is
-the same as in the ordinary license.
-
-  The reason we have a separate public license for some libraries is that
-they blur the distinction we usually make between modifying or adding to a
-program and simply using it.  Linking a program with a library, without
-changing the library, is in some sense simply using the library, and is
-analogous to running a utility program or application program.  However, in
-a textual and legal sense, the linked executable is a combined work, a
-derivative of the original library, and the ordinary General Public License
-treats it as such.
-
-  Because of this blurred distinction, using the ordinary General
-Public License for libraries did not effectively promote software
-sharing, because most developers did not use the libraries.  We
-concluded that weaker conditions might promote sharing better.
-
-  However, unrestricted linking of non-free programs would deprive the
-users of those programs of all benefit from the free status of the
-libraries themselves.  This Library General Public License is intended to
-permit developers of non-free programs to use free libraries, while
-preserving your freedom as a user of such programs to change the free
-libraries that are incorporated in them.  (We have not seen how to achieve
-this as regards changes in header files, but we have achieved it as regards
-changes in the actual functions of the Library.)  The hope is that this
-will lead to faster development of free libraries.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, while the latter only
-works together with the library.
-
-  Note that it is possible for a library to be covered by the ordinary
-General Public License rather than by this special one.
-
-		  GNU LIBRARY GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library which
-contains a notice placed by the copyright holder or other authorized
-party saying it may be distributed under the terms of this Library
-General Public License (also called "this License").  Each licensee is
-addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also compile or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    c) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    d) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the source code distributed need not include anything that is normally
-distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Library General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-			    NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-     Appendix: How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Library General Public
-    License as published by the Free Software Foundation; either
-    version 2 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Library General Public License for more details.
-
-    You should have received a copy of the GNU Library General Public
-    License along with this library; if not, write to the Free
-    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!

glob/ChangeLog

@@ -1,191 +0,0 @@
-2013-10-20  Paul Smith  <psmith@gnu.org>
-
-	* glob.c (glob): Cherry-pick a471e96a5352a5f0bde6d32dd36d33524811a2b1
-	from git://sourceware.org/git/glibc.git to fix SV 18123,
-	https://sourceware.org/bugzilla/show_bug.cgi?id=10278
-
-2008-09-28  Juan Manuel Guerrero  <juan.guerrero@gmx.de>
-
-	* glob.c (my_realloc) [__DJGPP__]: Don't define, and don't
-	redefine realloc to call it, since the DJGPP's realloc handles
-	NULL pointers correctly.
-
-2007-12-22  Juan Manuel Guerrero  <juan.guerrero@gmx.de>  (tiny change)
-
-	* glob.c [__GNU_LIBRARY__ && __DJGPP__]: Add a realloc
-	declaration that matches the one in the DJGPP libc.
-
-2006-02-24  Eli Zaretskii  <eliz@gnu.org>
-
-	* glob.c (my_malloc) [WINDOWS32]: Provide a full ISO C prototype,
-	to avoid compiler warnings.
-
-2005-06-25  Paul D. Smith  <psmith@gnu.org>
-
-	* fnmatch.h, glob.h [WINDOWS32]: Fix ifdefs in headers.
-	Fixes Savannah bug #13477.
-
-2005-03-11  Paul D. Smith  <psmith@gnu.org>
-
-	* glob.c (glob_in_dir): Change FNM_CASEFOLD to be enabled if
-	HAVE_CASE_INSENSITIVE_FS is defined.
-
-2003-01-30  Paul D. Smith  <psmith@gnu.org>
-
-	* glob.h: Patch for FreeBSD by Mike Barcroft <mike@freebsd.org>
-	Reported by Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>.  On
-	FreeBSD, declare __size_t to simply size_t.
-
-2002-04-22  Paul D. Smith  <psmith@gnu.org>
-
-	* Makefile.am: Use automake 1.6.
-	Use new automake condition USE_LOCAL_GLOB to decide whether or not
-	to build the local GNU glob library or use the system one.
-
-1999-09-12  Paul D. Smith  <psmith@gnu.org>
-
-	* fnmatch.c: Last GLIBC version wouldn't compile outside of GLIBC
-	(undefined reference to internal_function).  Update to the latest
-	version
-
-1999-09-11  Paul Eggert  <eggert@twinsun.com>
-
-	* glob.h (glob): If #defining to glob64, do this before
-	declaring it, so that all declarations and uses match, and
-	do not declare glob64, to avoid a declaration clash.
-	(globfree): Likewise with globfree64.
-
-1999-09-08  Eli Zaretskii  <eliz@is.elta.co.il>
-
-	* glob.c (prefix_array) [__MSDOS__,WINDOWS32]: Keep the trailing
-	slash unless DIRNAME is just "x:/".
-
-1999-09-06  Paul D. Smith  <psmith@gnu.org>
-
-	* fnmatch.c: Update to latest version from GLIBC.
-
-1999-07-21  Paul D. Smith  <psmith@gnu.org>
-
-	* glob.c, glob.h, fnmatch.c, fnmatch.h: Update to latest version
-	from GLIBC.
-
-	* fnmatch.c (internal_fnmatch): Use K&R definition syntax, not ANSI.
-	(__strchrnul): This won't exist outside GLIBC, so create one.
-
-	* glob.c: Move getlogin{,_r} prototypes below glob.h to get __P()
-	macro.
-
-1998-08-05  Paul D. Smith  <psmith@gnu.org>
-
-	* configure.in: Remove; configuration for glob is handled by the
-	make configure.in.
-
-1998-07-29  Paul D. Smith  <psmith@gnu.org>
-
-	* glob.c, fnmatch.c: New versions from the GLIBC folks (Ulrich
-	Drepper).  Fixes a bug reported by Eli Zaretski.  Integrates
-	DOS/Windows32 support.
-
-1998-07-27  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>
-
-	* glob.c (glob): Cast away const on assignment of pattern to dirname.
-	Cast the return type of __alloca() for traditional C compilers.
-
-1998-07-23  Paul D. Smith  <psmith@gnu.org>
-
-	* glob.c, fnmatch.c: New versions of these files from the GLIBC
-	folks (Ulrich Drepper).  Had to re-integrate some DOS/Windows
-	code.
-
-1998-07-10  Paul D. Smith  <psmith@gnu.org>
-
-	* glob.c (glob_in_dir): If no meta chars exist in PATTERN and
-	GLOB_NOCHECK is present, don't look for the file--whether it's
-	found or not, we'll always return it, so why bother searching?
-
-	Also, if we are searching and there are no meta chars, don't
-	bother trying fnmatch() if the strcmp() fails.
-
-1998-05-30  Eli Zaretskii  <eliz@is.elta.co.il>
-
-	* glob.c (glob) [__MSDOS__, WINDOWS32]: Compute the directory and
-	filename parts of the pattern correctly when it includes a drive
-	spec.  Disallow wildcards in the drive spec.  Prevent recursion
-	when dirname is of the form "d:/" or "d:".
-	(prefix_array) [__MSDOS__, WINDOWS32]: Don't append a slash to
-	"d:/" and "d:".
-
-1998-05-13  Paul D. Smith  <psmith@gnu.org>
-
-	* SMakefile, Makefile.ami, glob.c, glob.h, fnmatch.c: Updated from
-	the latest glibc version.
-
-1998-04-17  Paul D. Smith  <psmith@gnu.org>
-
-	* configure.in: Create a config.h file instead of setting things
-	on the compile line.  This is because when build.sh runs it merely
-	passes -DHAVE_CONFIG_H to the glob files, just as it does to the
-	make files.
-	* config.h.in: Created by autoheader.
-
-Tue Aug 12 10:52:34 1997  Paul D. Smith  <psmith@baynetworks.com>
-
-	* configure.in: Require autoconf 2.12.
-
-	* glob: Updates from latest GNU libc glob code.
-
-	* glob.c,glob.h,fnmatch.h: Change all WIN32 references to WINDOWS32.
-
-	* glob.h: OSF4 defines macros in such a way that GLOB_ALTDIRFUNC
-	is not defined.  Added a test to the #if which defines it if
-	_GNU_SOURCE is defined; that's set by both glob.c and GNU make.
-
-	* glob.c: SunOS4 w/ cc needs #include <stdio.h>, since assert.h
-	requires stderr but doesn't include stdio.h :-/.
-	(next_brace_sub): De-protoize function definition.
-	(glob): Cast __alloca(); on SunOS4 it uses the default return type
-	of int.
-	(glob): Irix defines getlogin_r() to return a char*; move the
-	extern for that into the _LIBC area since it isn't used except in
-	LIBC anyway.  Likewise, move extern getlogin() into the "else".
-
-Sat Jul 20 21:55:31 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
-
-	Win32 hacks from <Rob_Tulloh@tivoli.com>.
-	* posix/glob.c [WIN32]: Don't include <pwd.h>; don't use d_ino;
-	use void * for my_realloc; include <malloc.h> for alloca.
-	(glob) [WIN32]: Use "c:/users/default" for ~ if no HOME variable.
-	* posix/fnmatch.h [WIN32]: Use prototypes even if [!__STDC__].
-	* posix/glob.h: Likewise.
-
-Fri Jul 19 16:56:41 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
-
-	* posix/glob.h [!_AMIGA && !VMS]: Check this instead of just [!_AMIGA]
-	for `struct stat;' forward decl.
-
-Sat Jun 22 10:44:09 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
-
-	* posix/glob.c: Include <alloca.h> only [HAVE_ALLOCA_H], not [sparc].
-
-Fri Jun 21 00:27:51 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>
-
-	* posix/fnmatch.c (fnmatch): Fix \*[*?]+ case to increment name ptr
-	only for ?s, not for *s.  Fix from Chet Ramey.
-
-
-Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
-1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software
-Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software
-Foundation; either version 3 of the License, or (at your option) any later
-version.
-
-GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.

glob/Makefile.am

@@ -1,29 +0,0 @@
-# -*-Makefile-*-, or close enough
-# Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-#
-# GNU Make is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 3 of the License, or (at your option) any later
-# version.
-#
-# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
-# details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program.  If not, see <http://www.gnu.org/licenses/>.
-
-AUTOMAKE_OPTIONS =	foreign
-
-# Only build the library when the system doesn't already have GNU glob.
-if USE_LOCAL_GLOB
-  noinst_LIBRARIES =	libglob.a
-endif
-
-libglob_a_SOURCES =	glob.c glob.h fnmatch.c fnmatch.h
-
-
-EXTRA_DIST =		COPYING.LIB

lib/.gitignore

@@ -0,0 +1,11 @@
+*
+!/.gitignore
+
+!/fnmatch.c
+!/fnmatch.in.h
+/fnmatch.h
+
+!/glob.c
+!/glob.in.h
+/glob.h
+

lib/glob.c

@@ -226,9 +226,6 @@ extern char *alloca ();
 #   endif /* Not _AIX.  */
 #  endif /* sparc or HAVE_ALLOCA_H.  */
 # endif	/* GCC.  */
-
-# define __alloca	alloca
-
 #endif
 
 #ifndef __GNU_LIBRARY__
@@ -283,6 +280,14 @@ extern char *alloca ();
 #endif
 #include <glob.h>
 
+#if !defined __alloca
+# define __alloca alloca
+#endif
+
+#if !defined __stat
+# define __stat stat
+#endif
+
 #ifdef HAVE_GETLOGIN_R
 extern int getlogin_r __P ((char *, size_t));
 #else
@@ -369,7 +374,7 @@ glob (pattern, flags, errfunc, pglob)
   const char *dirname;
   size_t dirlen;
   int status;
-  int oldcount;
+  size_t oldcount;
 
   if (pattern == NULL || pglob == NULL || (flags & ~__GLOB_FLAGS) != 0)
     {
@@ -389,7 +394,7 @@ glob (pattern, flags, errfunc, pglob)
 	{
 	  /* Allocate working buffer large enough for our work.  Note that
 	    we have at least an opening and closing brace.  */
-	  int firstc;
+	  size_t firstc;
 	  char *alt_start;
 	  const char *p;
 	  const char *next;
@@ -860,7 +865,7 @@ glob (pattern, flags, errfunc, pglob)
 	 have to glob for the directory, and then glob for
 	 the pattern in each directory found.  */
       glob_t dirs;
-      register int i;
+      register size_t i;
 
       status = glob (dirname,
 		     ((flags & (GLOB_ERR | GLOB_NOCHECK | GLOB_NOESCAPE))
@@ -1010,7 +1015,7 @@ glob (pattern, flags, errfunc, pglob)
       if (dirlen > 0)
 	{
 	  /* Stick the directory on the front of each name.  */
-	  int ignore = oldcount;
+	  size_t ignore = oldcount;
 
 	  if ((flags & GLOB_DOOFFS) && ignore < pglob->gl_offs)
 	    ignore = pglob->gl_offs;
@@ -1028,7 +1033,7 @@ glob (pattern, flags, errfunc, pglob)
   if (flags & GLOB_MARK)
     {
       /* Append slashes to directory names.  */
-      int i;
+      size_t i;
       struct stat st;
       for (i = oldcount; i < pglob->gl_pathc; ++i)
 	if (((flags & GLOB_ALTDIRFUNC)
@@ -1072,7 +1077,7 @@ globfree (pglob)
 {
   if (pglob->gl_pathv != NULL)
     {
-      register int i;
+      register size_t i;
       for (i = 0; i < pglob->gl_pathc; ++i)
 	if (pglob->gl_pathv[i] != NULL)
 	  free ((__ptr_t) pglob->gl_pathv[i]);
@@ -1413,7 +1418,7 @@ glob_in_dir (pattern, directory, flags, errfunc, pglob)
 
  memory_error:
   {
-    int save = errno;
+    save = errno;
     if (flags & GLOB_ALTDIRFUNC)
       (*pglob->gl_closedir) (stream);
     else

m4/.gitignore

@@ -0,0 +1,5 @@
+*
+!/.gitignore
+!/aclocal.m4
+!/dospaths.m4
+

maintMakefile

@@ -2,6 +2,13 @@
 # only if you have the full copy of the GNU make sources from the Git
 # tree, not a dist copy.
 
+# --------------------- #
+# Updating everything.  #
+# --------------------- #
+
+.PHONY: update
+update:
+
 BUGLIST := bug-make@gnu.org
 
 # These are related to my personal setup.
@@ -38,6 +45,8 @@ AM_CPPFLAGS += $(MAKE_MAINTAINER_MODE)
 TEMPLATES = README README.DOS README.W32 README.OS2 \
 	    src/config.ami src/configh.dos src/config.h.W32 src/config.h-vms
 
+all: $(TEMPLATES)
+
 # Create preprocessor output files--GCC specific!
 %.i : %.c
 	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) -E -dD -o $@ $<
@@ -53,17 +62,17 @@ $(TEMPLATES) : % : %.template Makefile
 
 # Construct Makefiles by adding on dependencies, etc.
 #
-srccvt = $(patsubst src/%,$$(src)%,$(filter %.c,$1))
+cvt = $(patsubst $1/%,$$($1)%,$(filter %.c,$2))
 Basic.mk: Basic.mk.template .dep_segment Makefile
 	rm -f $@
 	sed -e 's@%VERSION%@$(VERSION)@g' \
-	    -e 's@%make_SOURCES%@$(call srccvt,$(make_SRCS))@g' \
+	    -e 's@%make_SOURCES%@$(call cvt,src,$(make_SRCS))@g' \
-	    -e 's@%glob_SOURCES%@$(patsubst glob/%,$$(glob)%,$(filter %.c,$(glob_SRCS)))@g' \
+	    -e 's@%w32_SOURCES%@$(call cvt,src,$(w32_SRCS))@g' \
-	    -e 's@%loadavg_SOURCES%@$(call srccvt,$(loadavg_SRCS))@g' \
+	    -e 's@%vms_SOURCES%@$(call cvt,src,$(vms_SRCS))@g' \
-	    -e 's@%alloca_SOURCES%@$(call srccvt,$(alloca_SRCS))@g' \
+	    -e 's@%amiga_SOURCES%@$(call cvt,src,$(amiga_SRCS))@g' \
-	    -e 's@%w32_SOURCES%@$(call srccvt,$(w32_SRCS))@g' \
+	    -e 's@%loadavg_SOURCES%@$(call cvt,lib,$(loadavg_SRCS))@g' \
-	    -e 's@%vms_SOURCES%@$(call srccvt,$(vms_SRCS))@g' \
+	    -e 's@%alloca_SOURCES%@$(call cvt,lib,$(alloca_SRCS))@g' \
-	    -e 's@%amiga_SOURCES%@$(call srccvt,$(amiga_SRCS))@g' \
+	    -e 's@%glob_SOURCES%@$(call cvt,lib,$(glob_SRCS))@g' \
 	  $< > $@
 	echo >>$@; echo '# --------------- DEPENDENCIES' >>$@; echo '#' >>$@; \
 	sed -e 's@^\([^ ]*\)\.o:@$$(OUTDIR)\1.$$(OBJEXT):@' \
@@ -77,10 +86,11 @@ Basic.mk: Basic.mk.template .dep_segment Makefile
 build.sh.in: build.template Makefile
 	rm -f $@
 	sed -e 's@%objs%@$(patsubst %.o,%.$${OBJEXT},$(filter-out src/remote-%,$(make_OBJECTS)))@g' \
-	    -e 's@%globobjs%@$(patsubst %.c,%.$${OBJEXT},$(filter %.c,$(glob_SRCS)))@g' \
 	  $< > $@
 	chmod a-w+x $@
 
+all: build.sh.in
+
 
 # Use automake to build a dependency list file, for Makebase.mk.
 #
@@ -154,6 +164,11 @@ move_if_change =  if test -r $(target) && cmp -s $(target).t $(target); then \
 # Updating PO files.  #
 # ------------------- #
 
+# NOTE: This is handled by the bootstrap script now
+
+#update: po-update
+update: po-check
+
 # PO archive mirrors --- Be careful; some might not be fully populated!
 #   ftp://ftp.unex.es/pub/gnu-i18n/po/maint/
 #   http://translation.sf.net/maint/
@@ -181,6 +196,13 @@ po-update:
 # Updating GNU build files.  #
 # -------------------------- #
 
+# Note: this is handled by the bootstrap script now
+#update: scm-update
+
+.PHONY: scm-update
+scm-update: get-build-aux/texinfo.tex get-build-aux/config.guess \
+		get-build-aux/config.sub get-doc/make-stds.texi get-doc/fdl.texi
+
 # The following pseudo table associates a local directory and a URL
 # with each of the files that belongs to some other package and is
 # regularly updated from the specified URL.
@@ -189,14 +211,14 @@ cvs-url = https://savannah.gnu.org/cgi-bin/viewcvs/~checkout~
 git-url = https://git.savannah.gnu.org/cgit
 target = $(patsubst get-%,%,$@)
 
-config-url = $(git-url)/config.git/plain/$(patsubst get-config/%,%,$@)
+config-url = $(git-url)/config.git/plain/$(patsubst get-build-aux/%,%,$@)
-get-config/config.guess get-config/config.sub:
+get-build-aux/config.guess get-build-aux/config.sub:
 	@echo $(WGET) $(config-url) -O $(target) \
 	  && $(WGET) $(config-url) -O $(target).t \
 	  && $(move_if_change)
 
-gnulib-url = $(git-url)/gnulib.git/plain/build-aux/$(patsubst get-config/%,%,$@)
+gnulib-url = $(git-url)/gnulib.git/plain/build-aux/$(patsubst get-build-aux/%,%,$@)
-get-config/texinfo.tex:
+get-build-aux/texinfo.tex:
 	@echo $(WGET) $(gnulib-url) -O $(target) \
 	  && $(WGET) $(gnulib-url) -O $(target).t \
 	  && $(move_if_change)
@@ -207,71 +229,66 @@ get-doc/make-stds.texi get-doc/fdl.texi:
 	  && $(WGET) $(gnustandards-url) -O $(target).t \
 	  && $(move_if_change)
 
-.PHONY: scm-update
-scm-update: get-config/texinfo.tex get-config/config.guess get-config/config.sub get-doc/make-stds.texi get-doc/fdl.texi
-
-
-# --------------------- #
-# Updating everything.  #
-# --------------------- #
-
-.PHONY: update
-update: po-update scm-update
-
 
 # ---------------------------------- #
 # Alternative configuration checks.  #
 # ---------------------------------- #
 
-.PHONY: check-alt-config
+CONFIG_CHECKS := \
-check-alt-config: \
 	checkcfg.--disable-job-server \
 	checkcfg.--disable-load \
 	checkcfg.--without-guile \
+	checkcfg.make_cv_sys_gnu_glob^no \
+	checkcfg.ac_cv_func_getloadavg^no+ac_cv_have_decl_getloadavg^no+gl_cv_have_raw_decl_getloadavg^no+ac_cv_lib_util_getloadavg^no+ac_cv_lib_getloadavg_getloadavg^no \
 	checkcfg.CPPFLAGS^-DNO_OUTPUT_SYNC \
 	checkcfg.CPPFLAGS^-DNO_ARCHIVES
 
+.PHONY: check-alt-config
+check-alt-config: $(CONFIG_CHECKS)
+
 # Trick GNU make so it doesn't run the submake as a recursive make.
 NR_MAKE = $(MAKE)
 
-# Check builds both with build.sh and with make and with Basic.mk
+# Check builds both with build.sh and with make
-checkcfg.%: distdir
+$(CONFIG_CHECKS): checkcfg.%: distdir
 	@echo "Building $@ (output in checkcfg.$*.log)"
 	exec >'checkcfg.$*.log' 2>&1; \
+	   echo "Testing configure with $(subst ^,=,$(subst +, ,$*))"; set -x; \
 	   rm -rf $(distdir)/_build \
 	&& mkdir $(distdir)/_build \
 	&& cd $(distdir)/_build \
-	&& echo "Testing configure with $(subst ^,=,$*)" \
+	&& ../configure --srcdir=.. $(subst ^,=,$(subst +, ,$*)) \
-	&& ../configure --srcdir=.. $(subst ^,=,$*) \
 		$(AM_DISTCHECK_CONFIGURE_FLAGS) $(DISTCHECK_CONFIGURE_FLAGS)
-	exec >>'checkcfg.$*.log' 2>&1; \
+	exec >>'checkcfg.$*.log' 2>&1; set -x; \
 	   cd $(distdir)/_build \
 	&& ./build.sh \
 	&& ./make $(AM_MAKEFLAGS) check \
 	&& ./make $(AM_MAKEFLAGS) clean
-	exec >>'checkcfg.$*.log' 2>&1; \
+	exec >>'checkcfg.$*.log' 2>&1; set -x; \
 	   cd $(distdir)/_build \
 	&& $(NR_MAKE) $(AM_MAKEFLAGS) CFLAGS='$(AM_CFLAGS)' \
 	&& ./make $(AM_MAKEFLAGS) check \
 	&& ./make $(AM_MAKEFLAGS) clean
 
-# Try the different build methods
+# Try using Basic.mk.  I can't test this on POSIX systems because it is only
+# used for non-POSIX systems; POSIX systems can just use normal
+# configure/Makefile.in etc.
 checkcfg.basicmk: checkcfg.% : distdir
 	@echo "Building $@ (output in checkcfg.$*.log)"
 	exec >'checkcfg.$*.log' 2>&1; \
+	   echo "Testing Basic.mk SRCDIR=.."; set -x; \
 	   rm -rf $(distdir)/_build \
 	&& mkdir $(distdir)/_build \
 	&& cd $(distdir)/_build \
-	&& echo "Testing Basic.mk SRCDIR=.." \
 	&& ../configure --srcdir=.. \
 		$(AM_DISTCHECK_CONFIGURE_FLAGS) $(DISTCHECK_CONFIGURE_FLAGS)
-	exec >>'checkcfg.$*.log' 2>&1; \
+	exec >>'checkcfg.$*.log' 2>&1; set -x; \
 	   cd $(distdir)/_build \
-	&& $(NR_MAKE) $(AM_MAKEFLAGS) -f ../Basic.mk CFLAGS='$(AM_CFLAGS)' SRCDIR=.. \
+	&& $(NR_MAKE) $(AM_MAKEFLAGS) -f ../Basic.mk SRCDIR=.. CFLAGS='$(AM_CFLAGS)' \
 	&& ./make $(AM_MAKEFLAGS) -f ../Basic.mk SRCDIR=.. check \
 	&& ./make $(AM_MAKEFLAGS) -f ../Basic.mk SRCDIR=.. clean
 	exec >>'checkcfg.$*.log' 2>&1; \
-	   echo "Testing Basic.mk SRCDIR=." \
+	   echo "Testing Basic.mk SRCDIR=."; set -x; \
 	&& rm -rf $(distdir)/_build \
 	&& cd $(distdir) \
 	&& ./configure \

makefile.com

@@ -71,14 +71,19 @@ $ if (p3.nes."WALL")
 $ then
 $   gosub check_cc_qual
 $ endif
-$ filelist = "alloca ar arscan commands default dir expand file function " + -
+$ filelist = "[.src]ar [.src]arscan [.src]commands [.src]default [.src]dir " + -
-             "guile hash implicit job load main misc read remake " + -
+             "[.src]expand [.src]file [.src]function [.src]guile " + -
-             "remote-stub rule output signame variable version " + -
+             "[.src]hash [.src]implicit [.src]job [.src]load [.src]main " + -
-             "vmsfunctions vmsify vpath vms_progname vms_exit " + -
+             "[.src]misc [.src]read [.src]remake [.src]remote-stub " + -
-	     "vms_export_symbol [.glob]glob [.glob]fnmatch getopt1 " + -
+             "[.src]rule [.src]output [.src]signame [.src]variable " + -
-             "getopt strcache"
+             "[.src]version [.src]strcache [.src]vpath " + -
+             "[.src]vmsfunctions [.src]vmsify [.src]vms_progname " + -
+             "[.src]vms_exit [.src]vms_export_symbol " + -
+             "[.lib]alloca [.lib]fnmatch [.lib]glob [.src]getopt1 [.src]getopt"
 $!
-$ copy config.h-vms config.h
+$ copy [.src]config.h-vms [.src]config.h
+$ copy [.lib]fnmatch.in.h [.lib]fnmatch.h
+$ copy [.lib]glob.in.h [.lib]glob.h
 $ n=0
 $ open/write optf make.opt
 $ loop:
@@ -141,7 +146,7 @@ $ else
 $   objdir := []
 $   write optf objdir+p1
 $ endif
-$ cc'ccopt'/nested=none/include=([],[.glob])/obj='objdir' -
+$ cc'ccopt'/nested=none/include=([],[.src],[.lib])/obj='objdir' -
   /define=("allocated_variable_expand_for_file=alloc_var_expand_for_file",-
   "unlink=remove","HAVE_CONFIG_H","VMS") -
   'p1'

mk/Amiga.mk

@@ -32,7 +32,9 @@ LDFLAGS =
 
 prog_SOURCES += $(alloca_SOURCES) $(loadavg_SOURCES) $(glob_SOURCES) $(amiga_SOURCES)
 
-extra_CPPFLAGS = IDir $(OUTDIR)src IDir $(SRCDIR)/src IDir $(SRCDIR)/glob
+BUILT_SOURCES += $(lib)alloca.h $(lib)fnmatch.h $(lib)glob.h
+
+extra_CPPFLAGS = IDir $(OUTDIR)src IDir $(SRCDIR)/src IDir $(OUTDIR)lib IDir $(SRCDIR)/lib
 
 C_SOURCE =
 OUTPUT_OPTION =

mk/Posix.mk.in

@@ -22,6 +22,7 @@
 
 prog_SOURCES += $(posix_SOURCES)
 
-extra_CPPFLAGS += @GUILE_CFLAGS@ @GLOBINC@
+extra_CPPFLAGS += @GUILE_CFLAGS@
 extra_LDFLAGS += @AM_LDFLAGS@
-LDLIBS += @GUILE_LIBS@ @LIBOBJS@ @GETLOADAVG_LIBS@ @GLOBLIB@ @ALLOCA@ @LIBINTL@ @LIBS@
+LDLIBS += @LIBOBJS@ @gl_LIBOBS@ @ALLOCA@
+LDLIBS += @GUILE_LIBS@ @GETLOADAVG_LIBS@ @LIBINTL@ @LIBS@

mk/VMS.mk

@@ -19,7 +19,7 @@
 # this program.  If not, see <http://www.gnu.org/licenses/>.
 
 src = [.src]
-glob = [.glob]
+lib = [.lib]
 SRCDIR = []
 
 OBJEXT = .obj
@@ -46,7 +46,7 @@ endif
 
 extra_CPPFLAGS = /define=($(subst $s,$c,$(patsubst %,"%",$(defs))))
 
-cinclude = /nested=none/include=($(src),$(glob))
+cinclude = /nested=none/include=($(src),$(lib))
 ifeq ($(CC),cc)
 cprefix = /prefix=(all,except=(glob,globfree))
 cwarn = /standard=relaxed/warn=(disable=questcompare)
@@ -71,8 +71,14 @@ endif
 # uncomment this
 #ALLOCA = $(alloca_SOURCES)
 
+# If your system doesn't have alloca.h, or the one provided is bad,
+# uncomment this
+#BUILT_SOURCES += $(lib)alloca.h
+
 prog_SOURCES += $(ALLOCA) $(glob_SOURCES) $(vms_SOURCES)
 
+BUILT_SOURCES += $(lib)fnmatch.h $(lib)glob.h
+
 COMPILE.cmd = $(CC) $(extra_CFLAGS)$(CFLAGS)/obj=$@ $(extra_CPPFLAGS)$(CPPFLAGS) $<
 
 LINK.cmd = $(LD)$(extra_LDFLAGS)$(LDFLAGS)/exe=$@ $(subst $s,$c,$^)$(LDLIBS)

mk/Windows32.mk

@@ -27,6 +27,8 @@ TOOLCHAIN = msvc
 
 prog_SOURCES += $(loadavg_SOURCES) $(glob_SOURCES) $(w32_SOURCES)
 
+BUILT_SOURCES += $(lib)fnmatch.h $(lib)glob.h
+
 w32_LIBS = kernel32 user32 gdi32 winspool comdlg32 advapi32 shell32 ole32 \
 	   oleaut32 uuid odbc32 odbccp32
 
@@ -39,7 +41,7 @@ msvc_CC = cl.exe
 msvc_LD = link.exe
 
 msvc_CPPFLAGS = /DHAVE_CONFIG_H /DWINDOWS32 /DWIN32 /D_CONSOLE
-msvc_CPPFLAGS += /I$(OUTDIR)src /I$(SRCDIR)/src /I$(SRCDIR)/glob /I$(SRCDIR)/src/w32/include
+msvc_CPPFLAGS += /I$(OUTDIR)src /I$(SRCDIR)/src /I$(SRCDIR)/src/w32/include /I$(OUTDIR)lib /I$(SRCDIR)/lib
 
 msvc_CFLAGS = /nologo /MT /W4 /EHsc
 msvc_CFLAGS += /FR$(OUTDIR) /Fp$(BASE_PROG).pch /Fd$(BASE_PROG).pdb
@@ -68,7 +70,7 @@ gcc_LD = $(gcc_CC)
 release_gcc_OUTDIR = ./GccRel/
 debug_gcc_OUTDIR = ./GccDebug/
 
-gcc_CPPFLAGS = -DHAVE_CONFIG_H -I$(OUTDIR)src -I$(SRCDIR)/src -I$(SRCDIR)/glob -I$(SRCDIR)/src/w32/include
+gcc_CPPFLAGS = -DHAVE_CONFIG_H -I$(OUTDIR)src -I$(SRCDIR)/src -I$(SRCDIR)/src/w32/include -I$(OUTDIR)lib -I$(SRCDIR)/lib
 gcc_CFLAGS = -mthreads -Wall -std=gnu99 -gdwarf-2 -g3
 gcc_LDFLAGS = -mthreads -gdwarf-2 -g3
 gcc_LDLIBS = $(addprefix -l,$(w32_libs))

mk/msdosdjgpp.mk

@@ -25,12 +25,12 @@ CC = gcc
 
 prog_SOURCES += $(loadavg_SOURCES) $(glob_SOURCES)
 
+BUILT_SOURCES += $(lib)fnmatch.h $(lib)glob.h
+
 INCLUDEDIR = c:/djgpp/include
 LIBDIR = c:/djgpp/lib
 LOCALEDIR = c:/djgpp/share
 
-extra_CPPFLAGS = -I$(SRCDIR)/glob
-
 MKDIR = command.com /c mkdir
 MKDIR.cmd = $(MKDIR) $(subst /,\\,$@)
 

po/.gitignore

@@ -1,15 +1,4 @@
-Makefile.in.in
+*
-Makevars.template
+!.gitignore
-POTFILES
+!LINGUAS
-Rules-quot
+!POTFILES.in
-boldquot.sed
-en@boldquot.header
-en@quot.header
-insert-header.sin
-make.pot
-quot.sed
-remove-potcdate.sin
-remove-potcdate.sed
-stamp-po
-*.gmo
-*.po

po/LINGUAS

@@ -1,5 +1,27 @@
-# Set of available languages: 27 languages
+be
-
+cs
-be cs da de es fi fr ga gl he hr id it ja ko lt nl pl pt_BR ru sr sv tr uk vi zh_CN zh_TW
+da
-
+de
-# Can't seem to get en@quot and en@boldquot to build properly?
+es
+fi
+fr
+ga
+gl
+he
+hr
+id
+it
+ja
+ko
+lt
+nl
+pl
+pt_BR
+ru
+sr
+sv
+tr
+uk
+vi
+zh_CN
+zh_TW

po/Makevars

@@ -1,65 +0,0 @@
-# This is a -*-Makefile-*-
-# Copyright (C) 2002-2018 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-#
-# GNU Make is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free
-# Software Foundation; either version 3 of the License, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
-# details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-# Makefile variables for PO directory in any package using GNU gettext.
-
-# Usually the message domain is the same as the package name.
-DOMAIN = $(PACKAGE)
-
-# These two variables depend on the location of this directory.
-subdir = po
-top_builddir = ..
-
-# These options get passed to xgettext.
-# Ensure that all our magical output macros are correctly marked as
-# C (printf) format strings.
-XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ \
-	--flag=DB:2:c-format --flag=DBF:2:c-format --flag=DBS:2:c-format \
-	--flag=O:3:c-format  --flag=OSN:3:c-format --flag=ONS:3:c-format \
-	--flag=OS:3:c-format --flag=OSS:3:c-format --flag=OSSS:3:c-format \
-	--flag=ON:3:c-format --flag=ONN:3:c-format
-
-# This is the copyright holder that gets inserted into the header of the
-# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
-# package.  (Note that the msgstr strings, extracted from the package's
-# sources, belong to the copyright holder of the package.)  Translators are
-# expected to transfer the copyright for their translations to this person
-# or entity, or to disclaim their copyright.  The empty string stands for
-# the public domain; in this case the translators are expected to disclaim
-# their copyright.
-COPYRIGHT_HOLDER = Free Software Foundation, Inc.
-
-# This is the email address or URL to which the translators shall report
-# bugs in the untranslated strings:
-# - Strings which are not entire sentences, see the maintainer guidelines
-#   in the GNU gettext documentation, section 'Preparing Strings'.
-# - Strings which use unclear terms or require additional context to be
-#   understood.
-# - Strings which make invalid assumptions about notation of date, time or
-#   money.
-# - Pluralisation problems.
-# - Incorrect English spelling.
-# - Incorrect formatting.
-# It can be your email address, or a mailing list address where translators
-# can write to without being subscribed, or the URL of a web page through
-# which the translators can contact you.
-MSGID_BUGS_ADDRESS = bug-make@gnu.org
-
-# This is the list of locale categories, beyond LC_MESSAGES, for which the
-# message catalogs shall be used.  It is usually empty.
-EXTRA_LOCALE_CATEGORIES =

src/alloca.c

@@ -1,503 +0,0 @@
-/* alloca.c -- allocate automatically reclaimed memory
-   (Mostly) portable public-domain implementation -- D A Gwyn
-
-   This implementation of the PWB library alloca function,
-   which is used to allocate space off the run-time stack so
-   that it is automatically reclaimed upon procedure exit,
-   was inspired by discussions with J. Q. Johnson of Cornell.
-   J.Otto Tennant <jot@cray.com> contributed the Cray support.
-
-   There are some preprocessor constants that can
-   be defined when compiling for your specific system, for
-   improved efficiency; however, the defaults should be okay.
-
-   The general concept of this implementation is to keep
-   track of all alloca-allocated blocks, and reclaim any
-   that are found to be deeper in the stack than the current
-   invocation.  This heuristic does not reclaim storage as
-   soon as it becomes invalid, but it will do so eventually.
-
-   As a special case, alloca(0) reclaims storage without
-   allocating any.  It is a good idea to use alloca(0) in
-   your main control loop, etc. to force garbage collection.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#ifdef HAVE_STRING_H
-#include <string.h>
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-
-#ifdef emacs
-#include "blockinput.h"
-#endif
-
-/* If compiling with GCC 2, this file's not needed.  */
-#if !defined (__GNUC__) || __GNUC__ < 2
-
-/* If someone has defined alloca as a macro,
-   there must be some other way alloca is supposed to work.  */
-#ifndef alloca
-
-#ifdef emacs
-#ifdef static
-/* actually, only want this if static is defined as ""
-   -- this is for usg, in which emacs must undefine static
-   in order to make unexec workable
-   */
-#ifndef STACK_DIRECTION
-you
-lose
--- must know STACK_DIRECTION at compile-time
-#endif /* STACK_DIRECTION undefined */
-#endif /* static */
-#endif /* emacs */
-
-/* If your stack is a linked list of frames, you have to
-   provide an "address metric" ADDRESS_FUNCTION macro.  */
-
-#if defined (CRAY) && defined (CRAY_STACKSEG_END)
-long i00afunc ();
-#define ADDRESS_FUNCTION(arg) (char *) i00afunc (&(arg))
-#else
-#define ADDRESS_FUNCTION(arg) &(arg)
-#endif
-
-#if __STDC__
-typedef void *pointer;
-#else
-typedef char *pointer;
-#endif
-
-#ifndef NULL
-#define	NULL	0
-#endif
-
-/* Different portions of Emacs need to call different versions of
-   malloc.  The Emacs executable needs alloca to call xmalloc, because
-   ordinary malloc isn't protected from input signals.  On the other
-   hand, the utilities in lib-src need alloca to call malloc; some of
-   them are very simple, and don't have an xmalloc routine.
-
-   Non-Emacs programs expect this to call use xmalloc.
-
-   Callers below should use malloc.  */
-
-#ifndef emacs
-#define malloc xmalloc
-#endif
-extern pointer malloc ();
-
-/* Define STACK_DIRECTION if you know the direction of stack
-   growth for your system; otherwise it will be automatically
-   deduced at run-time.
-
-   STACK_DIRECTION > 0 => grows toward higher addresses
-   STACK_DIRECTION < 0 => grows toward lower addresses
-   STACK_DIRECTION = 0 => direction of growth unknown  */
-
-#ifndef STACK_DIRECTION
-#define	STACK_DIRECTION	0	/* Direction unknown.  */
-#endif
-
-#if STACK_DIRECTION != 0
-
-#define	STACK_DIR	STACK_DIRECTION	/* Known at compile-time.  */
-
-#else /* STACK_DIRECTION == 0; need run-time code.  */
-
-static int stack_dir;		/* 1 or -1 once known.  */
-#define	STACK_DIR	stack_dir
-
-static void
-find_stack_direction (void)
-{
-  static char *addr = NULL;	/* Address of first 'dummy', once known.  */
-  auto char dummy;		/* To get stack address.  */
-
-  if (addr == NULL)
-    {				/* Initial entry.  */
-      addr = ADDRESS_FUNCTION (dummy);
-
-      find_stack_direction ();	/* Recurse once.  */
-    }
-  else
-    {
-      /* Second entry.  */
-      if (ADDRESS_FUNCTION (dummy) > addr)
-	stack_dir = 1;		/* Stack grew upward.  */
-      else
-	stack_dir = -1;		/* Stack grew downward.  */
-    }
-}
-
-#endif /* STACK_DIRECTION == 0 */
-
-/* An "alloca header" is used to:
-   (a) chain together all alloca'ed blocks;
-   (b) keep track of stack depth.
-
-   It is very important that sizeof(header) agree with malloc
-   alignment chunk size.  The following default should work okay.  */
-
-#ifndef	ALIGN_SIZE
-#define	ALIGN_SIZE	sizeof(double)
-#endif
-
-typedef union hdr
-{
-  char align[ALIGN_SIZE];	/* To force sizeof(header).  */
-  struct
-    {
-      union hdr *next;		/* For chaining headers.  */
-      char *deep;		/* For stack depth measure.  */
-    } h;
-} header;
-
-static header *last_alloca_header = NULL;	/* -> last alloca header.  */
-
-/* Return a pointer to at least SIZE bytes of storage,
-   which will be automatically reclaimed upon exit from
-   the procedure that called alloca.  Originally, this space
-   was supposed to be taken from the current stack frame of the
-   caller, but that method cannot be made to work for some
-   implementations of C, for example under Gould's UTX/32.  */
-
-pointer
-alloca (unsigned size)
-{
-  auto char probe;		/* Probes stack depth: */
-  register char *depth = ADDRESS_FUNCTION (probe);
-
-#if STACK_DIRECTION == 0
-  if (STACK_DIR == 0)		/* Unknown growth direction.  */
-    find_stack_direction ();
-#endif
-
-  /* Reclaim garbage, defined as all alloca'd storage that
-     was allocated from deeper in the stack than currently.  */
-
-  {
-    register header *hp;	/* Traverses linked list.  */
-
-#ifdef emacs
-    BLOCK_INPUT;
-#endif
-
-    for (hp = last_alloca_header; hp != NULL;)
-      if ((STACK_DIR > 0 && hp->h.deep > depth)
-	  || (STACK_DIR < 0 && hp->h.deep < depth))
-	{
-	  register header *np = hp->h.next;
-
-	  free ((pointer) hp);	/* Collect garbage.  */
-
-	  hp = np;		/* -> next header.  */
-	}
-      else
-	break;			/* Rest are not deeper.  */
-
-    last_alloca_header = hp;	/* -> last valid storage.  */
-
-#ifdef emacs
-    UNBLOCK_INPUT;
-#endif
-  }
-
-  if (size == 0)
-    return NULL;		/* No allocation required.  */
-
-  /* Allocate combined header + user data storage.  */
-
-  {
-    register pointer new = malloc (sizeof (header) + size);
-    /* Address of header.  */
-
-    if (new == 0)
-      abort();
-
-    ((header *) new)->h.next = last_alloca_header;
-    ((header *) new)->h.deep = depth;
-
-    last_alloca_header = (header *) new;
-
-    /* User storage begins just after header.  */
-
-    return (pointer) ((char *) new + sizeof (header));
-  }
-}
-
-#if defined (CRAY) && defined (CRAY_STACKSEG_END)
-
-#ifdef DEBUG_I00AFUNC
-#include <stdio.h>
-#endif
-
-#ifndef CRAY_STACK
-#define CRAY_STACK
-#ifndef CRAY2
-/* Stack structures for CRAY-1, CRAY X-MP, and CRAY Y-MP */
-struct stack_control_header
-  {
-    long shgrow:32;		/* Number of times stack has grown.  */
-    long shaseg:32;		/* Size of increments to stack.  */
-    long shhwm:32;		/* High water mark of stack.  */
-    long shsize:32;		/* Current size of stack (all segments).  */
-  };
-
-/* The stack segment linkage control information occurs at
-   the high-address end of a stack segment.  (The stack
-   grows from low addresses to high addresses.)  The initial
-   part of the stack segment linkage control information is
-   0200 (octal) words.  This provides for register storage
-   for the routine which overflows the stack.  */
-
-struct stack_segment_linkage
-  {
-    long ss[0200];		/* 0200 overflow words.  */
-    long sssize:32;		/* Number of words in this segment.  */
-    long ssbase:32;		/* Offset to stack base.  */
-    long:32;
-    long sspseg:32;		/* Offset to linkage control of previous
-				   segment of stack.  */
-    long:32;
-    long sstcpt:32;		/* Pointer to task common address block.  */
-    long sscsnm;		/* Private control structure number for
-				   microtasking.  */
-    long ssusr1;		/* Reserved for user.  */
-    long ssusr2;		/* Reserved for user.  */
-    long sstpid;		/* Process ID for pid based multi-tasking.  */
-    long ssgvup;		/* Pointer to multitasking thread giveup.  */
-    long sscray[7];		/* Reserved for Cray Research.  */
-    long ssa0;
-    long ssa1;
-    long ssa2;
-    long ssa3;
-    long ssa4;
-    long ssa5;
-    long ssa6;
-    long ssa7;
-    long sss0;
-    long sss1;
-    long sss2;
-    long sss3;
-    long sss4;
-    long sss5;
-    long sss6;
-    long sss7;
-  };
-
-#else /* CRAY2 */
-/* The following structure defines the vector of words
-   returned by the STKSTAT library routine.  */
-struct stk_stat
-  {
-    long now;			/* Current total stack size.  */
-    long maxc;			/* Amount of contiguous space which would
-				   be required to satisfy the maximum
-				   stack demand to date.  */
-    long high_water;		/* Stack high-water mark.  */
-    long overflows;		/* Number of stack overflow ($STKOFEN) calls.  */
-    long hits;			/* Number of internal buffer hits.  */
-    long extends;		/* Number of block extensions.  */
-    long stko_mallocs;		/* Block allocations by $STKOFEN.  */
-    long underflows;		/* Number of stack underflow calls ($STKRETN).  */
-    long stko_free;		/* Number of deallocations by $STKRETN.  */
-    long stkm_free;		/* Number of deallocations by $STKMRET.  */
-    long segments;		/* Current number of stack segments.  */
-    long maxs;			/* Maximum number of stack segments so far.  */
-    long pad_size;		/* Stack pad size.  */
-    long current_address;	/* Current stack segment address.  */
-    long current_size;		/* Current stack segment size.  This
-				   number is actually corrupted by STKSTAT to
-				   include the fifteen word trailer area.  */
-    long initial_address;	/* Address of initial segment.  */
-    long initial_size;		/* Size of initial segment.  */
-  };
-
-/* The following structure describes the data structure which trails
-   any stack segment.  I think that the description in 'asdef' is
-   out of date.  I only describe the parts that I am sure about.  */
-
-struct stk_trailer
-  {
-    long this_address;		/* Address of this block.  */
-    long this_size;		/* Size of this block (does not include
-				   this trailer).  */
-    long unknown2;
-    long unknown3;
-    long link;			/* Address of trailer block of previous
-				   segment.  */
-    long unknown5;
-    long unknown6;
-    long unknown7;
-    long unknown8;
-    long unknown9;
-    long unknown10;
-    long unknown11;
-    long unknown12;
-    long unknown13;
-    long unknown14;
-  };
-
-#endif /* CRAY2 */
-#endif /* not CRAY_STACK */
-
-#ifdef CRAY2
-/* Determine a "stack measure" for an arbitrary ADDRESS.
-   I doubt that "lint" will like this much.  */
-
-static long
-i00afunc (long *address)
-{
-  struct stk_stat status;
-  struct stk_trailer *trailer;
-  long *block, size;
-  long result = 0;
-
-  /* We want to iterate through all of the segments.  The first
-     step is to get the stack status structure.  We could do this
-     more quickly and more directly, perhaps, by referencing the
-     $LM00 common block, but I know that this works.  */
-
-  STKSTAT (&status);
-
-  /* Set up the iteration.  */
-
-  trailer = (struct stk_trailer *) (status.current_address
-				    + status.current_size
-				    - 15);
-
-  /* There must be at least one stack segment.  Therefore it is
-     a fatal error if "trailer" is null.  */
-
-  if (trailer == 0)
-    abort ();
-
-  /* Discard segments that do not contain our argument address.  */
-
-  while (trailer != 0)
-    {
-      block = (long *) trailer->this_address;
-      size = trailer->this_size;
-      if (block == 0 || size == 0)
-	abort ();
-      trailer = (struct stk_trailer *) trailer->link;
-      if ((block <= address) && (address < (block + size)))
-	break;
-    }
-
-  /* Set the result to the offset in this segment and add the sizes
-     of all predecessor segments.  */
-
-  result = address - block;
-
-  if (trailer == 0)
-    {
-      return result;
-    }
-
-  do
-    {
-      if (trailer->this_size <= 0)
-	abort ();
-      result += trailer->this_size;
-      trailer = (struct stk_trailer *) trailer->link;
-    }
-  while (trailer != 0);
-
-  /* We are done.  Note that if you present a bogus address (one
-     not in any segment), you will get a different number back, formed
-     from subtracting the address of the first block.  This is probably
-     not what you want.  */
-
-  return (result);
-}
-
-#else /* not CRAY2 */
-/* Stack address function for a CRAY-1, CRAY X-MP, or CRAY Y-MP.
-   Determine the number of the cell within the stack,
-   given the address of the cell.  The purpose of this
-   routine is to linearize, in some sense, stack addresses
-   for alloca.  */
-
-static long
-i00afunc (long address)
-{
-  long stkl = 0;
-
-  long size, pseg, this_segment, stack;
-  long result = 0;
-
-  struct stack_segment_linkage *ssptr;
-
-  /* Register B67 contains the address of the end of the
-     current stack segment.  If you (as a subprogram) store
-     your registers on the stack and find that you are past
-     the contents of B67, you have overflowed the segment.
-
-     B67 also points to the stack segment linkage control
-     area, which is what we are really interested in.  */
-
-  stkl = CRAY_STACKSEG_END ();
-  ssptr = (struct stack_segment_linkage *) stkl;
-
-  /* If one subtracts 'size' from the end of the segment,
-     one has the address of the first word of the segment.
-
-     If this is not the first segment, 'pseg' will be
-     nonzero.  */
-
-  pseg = ssptr->sspseg;
-  size = ssptr->sssize;
-
-  this_segment = stkl - size;
-
-  /* It is possible that calling this routine itself caused
-     a stack overflow.  Discard stack segments which do not
-     contain the target address.  */
-
-  while (!(this_segment <= address && address <= stkl))
-    {
-#ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o %011o\n", this_segment, address, stkl);
-#endif
-      if (pseg == 0)
-	break;
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      this_segment = stkl - size;
-    }
-
-  result = address - this_segment;
-
-  /* If you subtract pseg from the current end of the stack,
-     you get the address of the previous stack segment's end.
-     This seems a little convoluted to me, but I'll bet you save
-     a cycle somewhere.  */
-
-  while (pseg != 0)
-    {
-#ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o\n", pseg, size);
-#endif
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      result += size;
-    }
-  return (result);
-}
-
-#endif /* not CRAY2 */
-#endif /* CRAY */
-
-#endif /* no alloca */
-#endif /* not GCC version 2 */