During second expansion of pattern rules only the first pattern in
each "group" was being substituted. E.g. in this makefile:
.SECONDEXPANSION:
all: hello.x
%.x: $$(wordlist 1, 99, %.1 %.%.2) ; $(info $@ from $^)
hello.1 hello.\%.2 \%.1 \%.\%.2: ;
the output would build "hello.1" and "%.%.2" because each function
is considered a single "word" and only the first pattern is replaced.
Fix the expansion so each whitespace-separated string is considered a
word and the first pattern is replaced, giving "hello.1" and
"hello.%.2".
* src/rule.c (snap_implicit_rules): Keep enough space to replace %
with $(*F) if necessary.
* src/implicit.c (pattern_search): During second expansion break each
get_next_word result into individual words and replace the first % in
each with $* or $(*F) as needed.
* tests/scripts/features/patternrules: Add tests for variations.
The hash function we use can yield different results on big- and
little-endian systems which makes test output different. Choose
names to avoid this.
* tests/scripts/features/patternrules: Choose portable target names.
* tests/scripts/features/se_explicit: Ditto.
* tests/scripts/features/se_implicit: Ditto.
Previously we always used the file->stem value as our stem in
set_file_variables(); when that wasn't correct we had to temporarily
set that value while the function was called, then reset it afterward.
This led to issues (for example when we assumed the stem was a cached
string but it wasn't).
Avoid this by passing in the stem as an argument so that different
values can be provided.
Add tests to verify this.
* src/commands.c (set_file_variables): Take second parameter stem to
relieve the callers of set_file_variables() from setting/restoring
file->stem.
* src/commands.h (set_file_variables): Ditto.
(execute_file_commands): Pass file->stem to set_file_variables().
* src/file.c (expand_deps): Pass d->stem to set_file_variables() and
remove set and restore of file->stem.
* src/implicit.c (pattern_search): Pass stem to set_file_variables()
and remove set and restore of file->stem.
* tests/scripts/features/se_explicit: Add new tests.
* tests/scripts/features/se_implicit: Ditto.
* tests/scripts/features/se_statpat: Ditto.
* tests/scripts/variables/automatic: Ditto.
During normal pattern rule expansion only the first pattern (%) is
expanded; however during secondary expansion all patterns were
expanded. Modify secondary expansion to match the behavior of normal
expansion.
Implementation tweaked by Paul Smith <psmith@gnu.org>
* src/file.c (expand_deps): Don't use subst_expand() which replaces
all % with $*: instead replace only the first one, by hand.
Fix a memory leak where the dep structure was not always freed.
* tests/scripts/features/statipattrules: Use .RECIPEPREFIX not TAB.
Add a series of tests verifying that static pattern rules with and
without secondary expansion both return the same results.
Original patch from Dmitry Goncharov <dgoncharov@users.sf.net>
Fix the ar flags to match the default values in make. If the
U option is supported, add it to the end not the beginning,
since ARFLAGS now starts with a "-".
* tests/test_driver.pl: Add defaults for global variables.
(get_osname): Preserve $osname if it's set from $^O
* tests/scripts/features/archive: Set the default arflags.
If "U" is available add it to the end of the flags.
If the re-exec fails, be sure to remove a temp makefile that was
created to read from stdin.
* src/job.c (exec_command): Return on failure.
(child_execute_job): Call exit if exec_command returns.
* src/job.h (exec_command): Don't mark as NORETURN.
* src/main.c (main): Unlink stdin temporary file if re-exec fails.
* tests/run_make_tests.pl: Get value for ERR_nonexe_file/ERR_exe_dir.
* tests/scripts/features/temp_stdin: Test that temp file unlink works.
The fix for SV 60595 causes make to re-execute when the makefile is
read from stdin. E.g.
$ printf 'all:; $(info hello)' | make -sf -
Reported by Sergei Trofimovich <siarheit@google.com>
Test added by Paul Smith <psmith@gnu.org>
* src/main.c (main): Set the mtime of the stdin temporary file.
* tests/scripts/features/reinvoke: Add a test.
We already use undef makefile strings to mean "re-use the previous
makefile", so if the string is empty we'll assume it means "don't
use a makefile at all" (don't add -f).
* tests/run_make_tests.pl (run_make_test): If the makefile string
is empty, don't create a makefile or add -f.
* tests/scripts/features/include: Change empty makefile to "\n".
* tests/scripts/misc/close_stdout: Ditto.
* tests/scripts/options/dash-r: Ditto.
If a prereq of a pattern is explicitly mentioned as a prereq of an
unrelated rule, it should not be considered an intermediate file.
* tests/scripts/features/double_colon: Add tests mentioning unrelated
explicit targets.
* tests/scripts/features/grouped_targets: Ditto.
* tests/scripts/features/implicit_search: Ditto.
* tests/scripts/features/patternrules: Ditto.
* tests/scripts/features/se_implicit: Ditto.
* tests/scripts/features/statipattrules: Ditto.
The fix for SV 60595 introduced a backward-incompatibility: rules that
purported to rebuild included files, but didn't actually do so, were
treated as errors whereas before they were ignored. This breaks a
common idiom in makefiles where an empty recipe is created for an
included makefile so make doesn't complain if it doesn't exist.
Unfortunately this means make cannot diagnose some types of errors.
Extra tests supplied by Dmitry Goncharov <dgoncharov@users.sf.net>.
* doc/make.texi (Including Other Makefiles): Clarify this behavior.
* src/main.c (main): Don't run the new check-for-errors behavior.
* tests/scripts/features/reinvoke: Reset tests of the "old" behavior
and add new tests for this situation.
In SV 43677 we forced targets to be secondary if we found an
intermediate file that was listed as a prerequisite of another
target. This overrides .INTERMEDIATE settings, so doesn't work.
Now that we have an is_explicit flag in targets, use that instead.
* src/implicit.c (pattern_search): Remove setting of secondary.
Preserve the value of the is_explicit flag when creating a new
file target, and consider it when setting the intermediate flag.
* tests/scripts/features/patternrules: Add a test w/out INTERMEDIATE
* tests/scripts/targets/INTERMEDIATE: Add a test with INTERMEDIATE
Target-specific variables used to define the target as "ought to
exist" so they could never be intermediate. Now they can be, so
merge the target-specific variables from the intermediate target
so they're not lost.
* src/implicit.c (pattern_search): Use merge_variable_set_lists
to merge target-specific variables.
* tests/scripts/features/implicit_search: Add tests of target-
specific variable assignments and implicit rules.
* tests/scripts/features/errors: Match Windows-specific errors.
* tests/scripts/features/targetvars: Match Windows-specific errors.
* tests/scripts/misc/general4: Match Windows-specific errors.
The traditional definition of "ought to exist" in the user's manual can
lead to make choosing a poor series of chained implicit rules. Modify
that rule so that we first attempt to resolve implicit rules by
considering targets which are only (a) targets or (b) explicit
prerequisites of the current target.
For backward-compatibility, if we don't find a solution using that
algorithm use the previous definition where "ought to exist" means
"mentioned as a prerequisite of any target".
* src/implicit.c (pattern_search): An extra argument controls whether
to perform the backward-compatible rule search or not. If a prereq is
a target, or if it's a prerequisite of THIS target, then choose it.
If we get to the end and haven't found a match, but we have found a
potential compatibility rule, then retry with compat rules enabled.
If we're searching with compat rules enabled and we find a file
mentioned as a prerequisite of ANY target, then use it.
* tests/features/implicit_search: Provide a large suite of tests for
different steps of implicit rule search.
If multiple intermediate files are built together be sure all of them
are removed after make is finished. Continue to ensure that targets
that exist before make starts are not removed even if they appear to be
intermediate.
Add a number of tests to pattern rules to verify this behavior.
* src/filedef.h (struct file): Add a new is_explicit bitfield.
* src/file.c (rehash_file): Merge the is_explicit bit.
(enter_prereqs): Set is_explicit if the file is explicitly mentioned.
* src/implicit.c (pattern_search): Set intermediate on the file if it's
not explicit.
(record_files): Set is_explicit if a file is mentioned as a target.
* src/remake.c (update_file_1): Set secondary on files that already
exist so they won't be removed.
* tests/scripts/features/double_colon: Add a test for double-colon
pattern rules.
* tests/scripts/features/patternrules: Update KGO for tests where more
files are removed.
Add new tests to verify handling removal of intermediate files in the
context of grouped pattern targets.
If we find an included makefile but it's not readable, stop
immediately with an error rather than continuing to look in other
directories.
* src/read.c (eval_makefile): Only keep searching if the fopen error
is ENOENT, else stop and fail.
* tests/scripts/features/include: Add tests to verify this behavior.
Change the handling of included makefiles which are phony targets to
be similar to double-colon rules with no prerequisites: simply don't
build them at all during the remake a makefile phase.
Ensure that any included makefile which is needed but not built
results in an error.
Update the documentation to make this clear.
Add tests to verify this behavior.
* doc/make.texi (Remaking Makefiles): Clarify double-colon exception.
Document that phony targets are handled the same way.
(Phony Targets): Ditto.
* src/main.c (main): Check for phony targets when skipping goals.
Rather than throwing out skipped but failed goals keep them
separately then report them as errors.
* src/read.c (eval): Set the file location on included makefiles even
when there's no error.
* tests/scripts/features/include: Add tests for handling included
makefiles with both phony and double-colon rules to rebuild them.
Previously if an included makefile was rebuilt as a prerequisite of
another included makefile which didn't need to be rebuilt, make would
not realize that it needed to re-exec itself.
Ensure that if any included makefile target is rebuilt we re-exec.
Also ensure that if an included makefile is not readable, and our rule
for rebuilding it doesn't actually change it, we will still fail.
* src/remake.c (update_goal_chain): If a goal's update was successful
then check its status, even if no actual commands were run because it
was already up to date.
(show_goal_error): Remove superfluous cast.
* src/main.c (main): If the makefile remake did nothing, check that we
were able to successfully include all the makefiles we care about; if
not fail. When generating error messages about included makefiles be
sure to show the filename/linenumber information.
* test/scripts/features/reinvoke: Add tests for this behavior.
* test/scripts/options/dash-k: Update error messages.
Set the $$< automatic variable as best we can during secondary
expansion of prerequisites.
* src/commands.c (set_file_variables): Don't break without setting
'less' if secondary expansion is enabled.
* tests/scripts/features/se_explicit: Test secondary expansion results.
* tests/scripts/features/se_implicit: Test secondary expansion results.
* src/dep.h (DEP): Remove extraneous semicolon.
* src/dir.c (find_directory) [W32]: Replace removed variable.
* tests/scripts/features/include: Allow the extra default makefile
searched for on Windows.
* tests/scripts/functions/file: Use $(info ...) to avoid "command
too long" errors on Windows.
If a prereq of a pattern is an explicit target, it should not be
considered an intermediate file.
(Minor tweaks by Paul Smith <psmith@gnu.org>)
* src/dep.h (struct nameseq): Add is_explicit flag.
* src/implicit.c (struct patdeps): Ditto.
(pattern_search): Set the is_explicit flag appropriately for each
prerequisite, based on whether it contained a pattern or not.
Update the help output to note implicit vs. explicit prereqs.
* tests/scripts/features/double_colon: Add tests.
* tests/scripts/features/grouped_targets: Ditto.
* tests/scripts/features/patternrules: Ditto.
* tests/scripts/features/se_implicit: Ditto.
* tests/scripts/features/statipattrules: Ditto.
If a -include file does not exist, then some subsequent operation
creates it, then allow it to be successfully included.
* src/read.c (eval_makefile): If our last mtime was NONEXISTENT then
reset it to 0 so we'll check it again.
* tests/scripts/features/include: Add a test for this behavior.
Each time we invoke a command it's possible that it will change the
filesystem in ways that were not described by the target. If that
happens but we have cached previous directory contents then we may
make decisions or report results based on obsolete information.
Keep a count of how many commands we've invoked, and remember the
current command count every time we load the contents of a directory.
If we request the directory and the current command count has changed
we know the cache is outdated so reload from scratch.
* NEWS: Announce the change.
* src/makeint.h (command_count): Create a global counter.
* src/main.c (command_count): Ditto.
* src/job.c (reap_children): Increment the counter on job completion.
* src/function.c (func_file): Increment if we write a file.
* src/dir.c (clear_directory_contents): Clear the current contents of
a cached directory.
(struct directory_contents): Remember the counter value.
(struct directory): Remember the counter value for non-existing dirs.
(find_directory): If we have a cached directory and the count hasn't
changed then return it. Else, clear the previous contents and re-read
from scratch.
* tests/scripts/features/dircache: Add tests of the directory cache.
Rewrite the environment variable algorithm to correctly inherit
export settings from parent variable sets. The new algorithm
for computing the table of environment variables is:
- Start with the most local variable set and proceed to global.
- If the variable already exists in the table and we don't know
its export status, update it with the current variable's status.
- If the variable is not in the table and it's not global, add it
regardless of its status so if it's unexported we remember that.
- If the variable is not in the table and is global, check its
export status and don't add it if we won't export it.
Then when generating the environment variables, check the export
status of each variable in case it was a target-specific variable
and we have determined it should not be exported.
Rework SHELL handling to check at the end whether we added it or
not and if we didn't, add the value from the environment.
* NEWS: Announce support for target-specific "unexport"."
* doc/make.texi (Target-specific): Document the support.
* src/variable.h (enum variable_export): Make into a global type.
* src/read.c (struct vmodifiers): Use enum variable_export rather
than individual booleans.
(parse_var_assignment): Parse the "unexport" keyword.
(eval): Remember the vmodifier value in the variable.
(record_target_var): Ditto.
* src/variable.c (should_export): Check if the variable should be
exported.
(target_environment): Implement the above algorithm.
* tests/scripts/features/export: Test export/unexport with variable
assignments on the same line.
* tests/scripts/features/targetvars: Add a comprehensive suite of
tests for different types of target-specific export / unexport.
* tests/scripts/variables/SHELL: Update the comment.
When checking for invalid environment variable names we searched the
entire name string instead of just the first LENGTH chars; this could
cause us to incorrectly decide the variable was not exportable.
Dmitry Goncharov <dgoncharov@users.sf.net> found this bug and
provided a test case and sample fix: I used the test but chose a
slightly different fix.
* src/variable.c (define_variable_in_set): check the variable name
not the input string.
* tests/scripts/features/targetvars: Ensure environment variable
values are exported.
Ensure that makefiles are rebuilt in the order in which make first
considered them, and document this behavior in the manual.
* NEWS: Add a note about the new behavior
* doc/make.text (How make Processes a Makefile): Document it.
* main.c (main): Inverse the list of makefile goals.
* read.c (read_all_makefiles): Add default makefiles to the list at
the front in reverse order, the same way other makefiles are added.
* tests/scripts/features/include: Add tests to verify rebuild order.
The "[" link may be missing during OS boostrapping.
* build.sh: Convert "[ ... ]" to "test ..."
* maintMakefile: Ditto.
* scripts/copyright-update: Ditto
* tests/scripts/features/reinvoke: Ditto
* tests/scripts/features/targetvars: Ditto
Rather than having an %extraENV that is added to the default %ENV
and resetting %ENV _before_ each test, allow the test setup to
modify %ENV directly as needed then reset %ENV _after_ each test.
* tests/test_driver.pl: Remove unused %extraENV.
(resetENV): Don't add in %extraENV.
(_run_command): Reset after we run the command rather than before.
* tests/scripts/features/export: Convert %extraENV to %ENV
* tests/scripts/features/jobserver: Ditto
* tests/scripts/features/parallelism: Ditto
* tests/scripts/features/targetvars: Ditto
* tests/scripts/functions/eval: Ditto
* tests/scripts/functions/foreach: Ditto
* tests/scripts/functions/origin: Ditto
* tests/scripts/misc/general4: Ditto
* tests/scripts/options/dash-e: Ditto
* tests/scripts/targets/POSIX: Ditto
* tests/scripts/variables/GNUMAKEFLAGS: Ditto
* tests/scripts/variables/SHELL: Ditto
We want to process -C options as early as possible, before we might
write informational messages, so that Entering/Leaving messages have
the correct directory.
* src/main.c (main): Move code dealing with changing directories
before parsing of the jobserver auth flag.
* tests/scripts/features/jobserver: Test the order of enter/leave.
POSIX says that suffix rules cannot have prerequisites, but after
making this change we observed a number of makefiles "in the wild"
that were relying on this behavior and failed.
For .POSIX: makefiles, obey POSIX. Otherwise preserve the old
behavior. However, generate a warning so users know this is a
problem. In a future version we will change all behavior to be
POSIX-conforming.
* NEWS: describe the change
* src/rule.c (convert_to_pattern): If posix_pedantic don't make a
pattern rule if prereqs exist. Otherwise show a warning.
* tests/scripts/features/suffixrules: Add tests for the new behavior
including .POSIX vs. non-.POSIX.
Avoid using posix_spawn implementations that fail asynchronously when
the spawned program can't be invoked: this means instead of getting
an error such as "No such file or directory" we get just "Exit 127".
Original implementation of the configure.ac macro provided by
Martin Dorey <martin.dorey@hds.com>
Original implementation of the regression tests provided by
Dmitry Goncharov <dgoncharov@users.sf.net>
* configure.ac: Test whether posix_spawn fails asynchronously. In a
cross-compilation environment, assume that it does not. If we detect
that it does, fall back to fork/exec.
* tests/scripts/features/exec: Add regression tests for different
shebang invocation methods.
* src/dep.h: Add a new flag PARSEFS_ONEWORD
* src/read.c (parse_file_seq): If PARSEFS_ONEWORD is given, treat the
entire incoming string as a single pattern.
* src/implicit.c (pattern_search): Pass PARSEFS_ONEWORD when parsing
patterns for wildcards.
* tests/scripts/features/patternrules: Add a new test.
If the stem matches a path containing a directory not just a
filename, make sure the second expansion of $* in the
prerequisites matches $* in the recipe. This requires using
$(*F) when replacing % in the first expansion to preserve the
simple filename.
* src/implicit.c (pattern_search): If lastslash is set prepend
the directory onto the stem. Then use $(*F) when expanding %.
* tests/scripts/features/se_implicit: Add a test case
* tests/thelp.pl: Rename from tests/jhelp.pl.
(op): Use names instead of options for the operations.
(op): Add new operations for sleep, mkdir, and rm.
(op): Enhance wait to time out
* tests/run_make_tests.pl: Add a new #HELPER# replacement
(subst_make_string): Use fully-qualified path to thelp.pl
* tests/scripts/features/parallelism: Update to use thelp.pl
and the new named operations. Use thelp.pl sleep instead of
system-specific sleep commands.
* tests/scripts/features/output-sync: Update to use thelp.pl
instead of complex shell scripts.
* Makefile.am: Distribute tests/thelp.pl instead of tests/jhelp.pl
* tests/config-flags.pm.W32: Create a predefined Windows file.
* Makefile.am (test_FILES): Add it to the distribution.
* build_w32.bat: Install tests/config-flags.pm if not existing.
* tests/run_make_tests.pl (get_config): Create new function.
* tests/scripts/features/archives: Call get_config() rather than
using %CONFIG_FLAGS directly.
* tests/scripts/features/load: Ditto.
* tests/scripts/features/loadapi: Ditto.
* tests/scripts/functions/wildcard: Ditto.
This reverts commit 6264deece3.
Further investigation discovers that the real issue is that
GNU Emacs compile mode doesn't have a matching regex for GNU
make error messages generated when targets fail. I submitted
a patch to GNU Emacs adding a matcher for compile mode.
Ensure we properly reduce job_slots_used if a command fails because
it doesn't exist/can't be started.
* src/job.h (struct child): Add a field jobslot to be set when using
a job slot.
* src/job.c (start_waiting_job): Remember if we are using a job slot.
(reap_children): Reduce number of job slots used by jobslot.
Go through both run_make_tests.pl and test_driver.pl and slightly
modernize the Perl and clean up indentation etc. Fix a number of
warnings in the test scripts detected by running with -w.
* tests/test_driver.pl: Move make error string detection out of the
base test driver.
(run_all_tests): Ensure that we always look for tests in the cwd.
* tests/run_make_tests.pl: Use File::Spec for path manipulations.
Correctly use setlocale() when detecting error strings.
Get configuration from the config-flags.pm file not config.status.
* tests/scripts/features/archives: Use new $cwddir variable.
* tests/scripts/features/reinvoke: Add missing semicolon.
* tests/scripts/features/vpath2: Avoid non-existent variable.
* tests/scripts/functions/foreach: Escape variables.
* tests/scripts/misc/bs-nl: Remove non-existing \v escape sequence.
* tests/scripts/misc/general4: Use handy create_file().
* tests/scripts/options/dash-C: Use Cwd/$cwddir.
* tests/scripts/options/dash-I: Use subst_make_string() and #PWD#.
* tests/scripts/options/symlinks: Use File::Spec.
* tests/scripts/targets/DEFAULT: Use create_file and run_make_test.
* tests/scripts/variables/CURDIR: Use run_make_test.
* tests/scripts/variables/automatic: Remove extraneous "\".
* tests/scripts/vms/library: Remove extra "my" and extraneous "\".
