Make enters an infinite loop when some option and MAKEFLAGS=<value>
are specified on the command line. For example,
$ make -r MAKEFLAGS=hello=world
If decode_switches() runs handle_non_switch_argument() from within
the getopt() loop, it would recursively call decode_switches() to
enter a new getopt() loop, corrupting the state of the outer loop.
* src/main.c (decode_switches): Save up non-option arguments and run
handle_non_switch_argument() only after we're done with getopt().
* tests/scripts/variables/MAKEFLAGS: Add tests.
Add a warning to control circular dependency detection. Use "warn" as
the default action to be backward-compatible.
* src/warning.h (enum warning_type): Add warning type wt_circular_dep.
* src/warning.c (warn_init): Set default wt_circular_dep to w_warn.
* src/remake.c (update_file_1): Consult the circular-dep warning to
handle circular dependencies.
* tests/scripts/options/warn: Test --warn circular-dep flag.
* tests/scripts/variables/WARNINGS: Test .WARNINGS circular-dep flag.
* doc/make.texi: Document circular-dep warning.
* doc/make.1: Ditto.
Appending to a pattern specific variable produces an incorrect value
in the presence of a command line definition or an env override of
the variable. Also, fix pattern/target-specific appending to a
variable with origin override.
* At parse time record_target_var sets the value of a pattern
specific variable to the value defined on command line or to the
value of the env override.
* Later, at build time, recursively_expand_for_file appends this
value of the variable (set in record_target_var) to the command
line value again, regardless of the origin of the variable.
This patch modifies recursively_expand_for_file to avoid appending,
unless the origin of the variable beats or equals the origin of one
of the parent definitions of this variable.
Reported by Rob <robw9739@gmail.com>,
Brian Vandenberg <phantall@gmail.com>,
Markus Oberhumer <markus@oberhumer.com>.
* NEWS: Note the change.
* src/variable.c (do_variable_definition): Avoid merging a
pattern-specific variable with the parent definition when a command
line or env override is present.
* src/expand.c (recursively_expand_for_file): Avoid appending to a
pattern-specific variable, unless the origin of this pattern-specific
variable beats or equals the origin of one of the parent definitions
of this variable.
* doc/make.texi (Override Directive): Add missing cross-reference.
* tests/scripts/variables/append: Add tests.
Rework the single "?=" operator to instead allow a "?" modifier to be
prepended to ANY assignment operator. If "?" is given then the
variable is assigned (using whatever operator comes next) if and only
if the variable is not already defined. If it is defined then no
action is taken (the right-hand side is not expanded, etc.)
* NEWS: Announce this new feature.
* doc/make.texi: Modify the documentation around assignment operators.
* src/variable.h: Remove the f_conditional variable flavor.
(do_variable_definition): Add an argument specifying conditional.
* src/variable.c (parse_variable_definition): Use the existing flag
"conditional" to remember if we saw "?" rather than the flavor.
When we see "?" skip it and continue trying to parse an assignment.
(try_variable_definition): Pass condition to do_variable_definition().
(initialize_file_variables): Ditto.
(do_variable_definition): Check for conditional up-front: quit if set.
Remove handling of obsolete f_conditional flavor.
* src/read.c (eval_makefile): MAKEFILE_LIST is not conditional.
(do_define): Unset conditional for define with no operator. Pass the
conditional flag to do_variable_definition().
(construct_include_path): .INCLUDE_DIRS is not conditional.
* src/load.c (load_file): .LOADED is not conditional.
* tests/scripts/variables/conditional: Add new tests.
* src/read.c (make_word_type): Remove w_varassign from the enum.
(get_next_mword): This function is never called on a string in a place
where we might find a variable assignment. Any variable assignments
have already been handled via try_variable_definition(), so we don't
need to check for them here.
* tests/scripts/variables/flavors: Check triple-colon assignment in
target-specific variables.
* src/rule.c (snap_implicit_rules): Set need_2nd_expansion of each
prerequisite of global .EXTRA_PREREQS.
* src/file.c (snap_file): Set need_2nd_expansion of each prerequisite
of target-specific .EXTRA_PREREQS.
* tests/scripts/variables/EXTRA_PREREQS: Add tests.
Reported by Daniel Gerber <dg@atufi.org>.
Disable builtin variables and rules immediately, when -R or -r is
added to MAKEFLAGS inside the makefile.
* src/main.c (disable_builtins): Add new function disable_builtins().
(main): Call disable_builtins().
(reset_makeflags): Call disable_builtins().
* tests/scripts/options/dash-r: Add tests.
* tests/scripts/variables/MAKEFLAGS: Update tests.
Avoid cross-contamination between test files by creating a new
working directory for each file, and setting it as the current
directory before starting the tests in that file.
Rename the test output as tNNN.{base,log,diff,mk} where NNN is
a test number starting with 001 for the first test. It is
slightly more annoying to find diff files since you can't use
autocomplete directly but it is simpler to match things.
Detect the source directory as the location of the test_driver.pl
script, so remove the separate -srcdir option.
* Makefile.am: Remove hacks to create symlinks when building
out-of-tree, and remove -srcdir option from run_make_tests.
* tests/test_driver.pl: Locate $srcpath based on __FILE__, then
compute $toppath as its parent. Set $scriptpath under $srcpath
and $workpath under the current directory. Toss $*_filename
and modify get_logfile() etc. to use the suffix directly. Add
a chdir() around the invocation of the test.
* tests/run_make_tests.pl: Throw out the -srcdir option and use
$srcpath set in test_driver.pl. The #WORK# helper is no longer
useful so remove it. Set #PWD# to the current working dir. Always
search the local directory and $srcpath for config-flags.pm.
Use $srcpath for finding the thelp.pl script.
* tests/scripts/features/vpath: Don't put things in work/ as it
is no longer a subdirectory.
* tests/scripts/features/vpathgpath: Ditto.
* tests/scripts/features/vpathplus: Ditto.
* tests/scripts/misc/general1: Ditto.
* tests/scripts/misc/general2: Ditto.
* tests/scripts/options/dash-k: Ditto.
* tests/scripts/options/symlinks: Use $testpath as the working
directory.
* tests/scripts/variables/GNUMAKEFLAGS: Use the test helper to
display env var values (grepping for GNUMAKEFLAGS finds extra things
now that it is our current working directory).
Create a new special variable, .WARNINGS, to allow per-makefile
control over warnings. The command line settings will override
this.
Move the handling of warning flags to a new file: src/warning.c.
Allow the decode to work with generic strings, and call it from
decode_switches().
* Makefile.am: Add new file src/warning.c.
* build_w32.bat: Ditto.
* builddos.bat: Ditto.
* po/POTFILES.in: Ditto.
* src/makeint.h: #define for the .WARNINGS variable name.
* src/warning.h: Add declarations for methods moved from main.c.
Rename the enum warning_state to warning_action.
* src/warning.c: New file. Move all warning encode/decode here
from main.c.
* src/main.c: Move methods into warning.c and call those methods
instead.
(main): Set .WARNINGS as a special variable.
* src/job.c (construct_command_argv): Rename to warning_action.
* src/read.c (tilde_expand): Ditto.
* src/variable.c (set_special_var): Update warnings when the
.WARNINGS special variable is set.
* tests/scripts/options/warn: Check invalid warning options.
* tests/scripts/variables/WARNINGS: Add tests for the .WARNINGS
special variable.
Replace the singleton --warn-undefined-variables with infrastructure
to manage multiple warnings: the --warn option can take an action
"ignore", "warn", or "error" (which will apply to all warnings), or
a specific warning type and an action for that type. Multiple
options can be provided and are consolidated.
* NEWS: Announce the new option.
* doc/make.1: Document in the man page.
* doc/make.texi (Warnings): Document in the user's manual.
* Makefile.am: Add new header warning.h.
* src/warning.h: Define enum for actions and warning types, and
macros to test whether they are set. Keep the default settings
separate so that we can correctly reconstruct MAKEFLAGS.
* src/makeint.h: Remove deprecated warn_undefined_variables_flag.
* src/main.c: Create global variables to hold warning settings.
(switches): Add a new switch for --warn.
(initialize_warnings): Set the default warning actions.
(main): Call initialize_warnings().
(encode_warning_state, decode_warning_state): Convert warning states
between strings and enums.
(encode_warning_name, decode_warning_name): Convert warning names
between strings and enums.
(decode_warn_flags): Convert a --warn option into enum values. If
deprecated warn_undefined_variables_flag is set convert it to --warn.
(decode_switches): Don't remove duplicates of --warn since order
matters. Call decode_warn_flags() to handle --warn.
(define_makeflags): Special-case handling of --warn options written
to MAKEFLAGS: write out the current settings.
* src/read.c (tilde_expand): Use new warning control macros.
* src/variable.c (warn_undefined): Ditto.
* src/job.c (construct_command_argv): Ditto.
* tests/scripts/options/warn: Rename from warn-undefined-variables
and add tests for --warn.
* tests/scripts/variables/MAKEFLAGS: Expect the new behavior.
Previously we used the fact that this line ending expanded to "$ "
which would then expand to the empty string. This has problems if
you enable warnings for undefined variables, so directly implement
this special (but documented) trick in the GNU Make parser.
As a side-effect this also removes all previous whitespace when
in GNU Make mode (not in POSIX mode) just as it would without "$".
* src/misc.c (collapse_continuations): Check for "$\" and remove it.
* tests/scripts/variables/flavors: Add regression tests including
with previous whitespace, and escaped/unescaped "$"
Original patches provided by Igor Todorovski <itodorov@ca.ibm.com>
Reworked by Paul Smith <psmith@gnu.org>.
Thanks to IBM for providing a test system.
* NEWS: Announce support.
* AUTHORS: Ditto.
* README.zOS: Provide details on building GNU Make on z/OS.
* build.sh (get_mk_var): z/OS sh has a strange bug which causes it to
generate extra lines of output: rework the function to print output
as we compute it instead of collecting it into a variable, which
works around this bug.
* src/makeint.h: Declare MK_OS_ZOS if we're building for z/OS.
* src/arscan.c: Don't include <ar.h> on z/OS.
* src/job.c: We can't change environ in ASCII mode on z/OS.
* src/main.c: Ditto. Also we can't use pselect() on z/OS.
* src/posixos.c: pselect() seems to hang on z/OS: don't use it.
* tests/run_make_tests.pl: Handle different exit codes on z/OS.
* tests/test_driver.pl: Preserve some special z/OS env.vars.
Add special checks to output comparisons when on z/OS.
* tests/scripts/features/archives: Don't validate names. Don't
try to compile empty files as IBM compilers complain.
* tests/scripts/features/shell_assignment: Fix octal value of #.
* tests/scripts/features/temp_stdin: Don't print "term".
* tests/scripts/functions/shell: Handle shell exit codes.
* tests/scripts/targets/ONESHELL: Ditto.
* tests/scripts/targets/POSIX: sh -x prints differently.
* tests/scripts/variables/SHELL: Ditto.
If a parent target has an exported variable that is private, don't
export it in child targets.
* NEWS: Mention this change.
* src/variable.c (target_environment): Ignore private inherited
variables.
* tests/thelp.pl: Add a new "env" operation to show env.var. values.
* tests/scripts/variables/private: Verify this new behavior.
The POSIX standard only requires false(1) to return a "non-zero" exit
code; almost all systems return 1 but some (Solaris!!!) return 255 or
possibly even other values. Use our helper "fail" instead.
* tests/thelp.pl: Have the "fail" command obey -q.
* tests/scripts/features/parallelism: Helper -q no longer prints fail.
* tests/scripts/targets/POSIX: Replace false with #HELPER# -q fail 1.
* tests/scripts/variables/MAKEFLAGS: Ditto.
* tests/scripts/variables/SHELL: Ditto.
Strawberry Perl has some different behaviors from ActiveState Perl
which impact the test suite:
- Avoid Perl's chomp() as it may not remove CRs; chomp() may remove
only the final NL but not the CR in a CRNL line ending.
- Strawberry Perl doesn't support ActiveState's system(1, ...) form.
- Strawberry Perl (or msys?) does something weird with "/tmp" when
provided to exec(), replacing it with the user's %TEMP%.
- Strawberry Perl uses msys paths like /c/foo instead of C:\foo.
* tests/test_driver.pl (get_osname): Strawberry Perl uses 'msys' as
its $^O so if we see that use a port of 'W32'.
(_run_with_timeout): Strawberry Perl doesn't support the special
system(1, ...) form of system() so use POSIX standard fork/exec.
(compare_answer): Paths generated by Strawberry Perl use msys path
format (e.g., /c/foo instead of C:\foo); check for those differences
and compare RE against both the unmodified and modified log.
* tests/run_make_tests.pl (set_defaults): Switch from chomp to s///
to remove CRNL and NL line endings.
* tests/scripts/features/errors: Executing directories on Strawberry
will give an error; translate it to Windows error output format.
* tests/scripts/features/output-sync: Ditto.
* tests/scripts/features/temp_stdin: Ditto.
* tests/scripts/functions/realpath: Ditto.
* tests/scripts/options/dash-I: Ditto.
* tests/scripts/variables/INCLUDE_DIRS: Ditto.
* tests/scripts/misc/close_stdout: /dev/full is reported as existing
on Strawberry Perl, but it doesn't do anything. Skip the test.
* tests/scripts/variables/MAKEFLAGS: When an argument containing
/tmp is passed to a program via exec(), something replaces it with
the expansion of the %TEMP% variable. Instead of using /tmp create
a local directory to use.
* doc/make.texi (Options/Recursion): Clarify that MAKEFLAGS values
from the environment have precedence over those set in the makefile.
* tests/scripts/variables/MAKEFLAGS: Check boolean switches -k/-S,
-w/--no-print-directory and -s/--no-silent as follows:
1. A switch can be enabled or disabled on the command line.
2. A switch can be enabled or disabled in env.
3. A switch can be enabled or disabled in makefile.
4. Command line beats env and makefile.
5. Env beats makefile.
6. MAKEFLAGS contains each specified switch at parse and build time.
7. If switches are specified in multiple origins, MAKEFLAGS contains
the winning switch at parse and build time.
8. MAKEFLAGS does not contain the losing switch.
Also test that --debug settings from different origins are combined
together into one option.
This commit introduces two visible changes:
1. Keep command line variable assignments in MAKEFLAGS at all times,
even while parsing makefiles.
2. Define makeflags immediately when a makefile modifies MAKEFLAGS.
The new MAKEFLAGS and MAKEOVERRIDES initialization procedure:
1. decode_switches (argc, argv, o_command) is called to parse command
line variable assignments.
2. Command line variable assignments go through quote_for_env.
Initialize -*-command-variables-*- to the quoted values.
3. MAKEOVERRIDES is initialized to refer to -*-command-variables-*-
with origin o_env to keep the definitions in the database intact.
4. define_makeflags() is called which adds MAKEOVERRIDES to MAKEFLAGS.
5. Makefiles are parsed. If a makefile modifies MAKEFLAGS, the new
value of MAKEFLAGS is defined right away.
6. Env switches are decoded again as o_env. The definitions set by
decode_switches at step 1 stay intact, as o_command beats o_env.
We must preserve the original intact definitions in order to detect
failure cases; for example:
$ cat makefile
all:; $(hello)
$ make hello='$(world'
makefile:1: *** unterminated variable reference. Stop.
* src/makeint.h: Declare enum variable_origin, struct variable and
define_makeflags(). Add parameter origin to decode_env_switches().
* src/main.c (define_makeflags): Remove "all". If a variable is
assigned on the command line then append MAKEOVERRIDES to MAKEFLAGS.
(decode_env_switches): Replace parameter env with origin.
(decode_switches): Replace parameter env with origin.
Treat origin == o_command as env == 0.
(handle_non_switch_argument): Replace parameter env with origin.
Treat origin == o_command as env == 0.
(main): Call decode_switches() with origin==o_command before parsing
makefiles. Call decode_switches() with origin==o_env after parsing
makefiles.
* src/variable.c (set_special_var): Define makeflags at parse time,
each time a makefile modifies MAKEFLAGS.
(do_variable_definition): Strip command line variable assignments from
MAKEFLAGS before appending extra flags. set_special_var() adds them
back.
* tests/scripts/variables/MAKEFLAGS: Add tests.
* src/read.c (eval): If "missing separator" appears to be due to
missing space after ifeq/ifneq, give a hint about the error.
* tests/scripts/misc/failure: Check for these types of failures.
* tests/scripts/variables/special: Move error checking unrelated
to special variables, to misc/failure.
* maintMakefile: Remove the template headers as prerequisites.
* tests/scripts/features/jobserver: Only test fifo if enabled.
* tests/scripts/variables/INCLUDE_DIRS: On MacOS none of the default
directories exist so .INCLUDE_DIRS is empty by default.
* tests/scripts/features/se_explicit: Fail via exit. cp will show
different error messages on different systems.
* tests/scripts/features/se_implicit: Ditto.
* tests/scripts/features/se_statpat: Ditto.
Savannah issues such as SV 57242 and SV 62397 show how passing
references to closed file descriptors via the --jobserver-auth option
in MAKEFLAGS can lead to problematic outcomes.
When computing the child environment for a non-recursive shell, add
an extra option to MAKEFLAGS to disable the file descriptors for the
jobserver.
Unfortunately this doesn't modify the value of the make variable
MAKEFLAGS, it only modifies the value of the sub-shell environment
variable MAKEFLAGS. This can lead to confusion if the user is not
considering the distinction.
* src/makeint.h: Publish the jobserver-auth value. Add a global
definition of the name of the command line option.
* src/os.h (jobserver_get_invalid_auth): New function to return a
string invalidating the jobserver-auth option.
* src/w32/w32os.c (jobserver_get_invaid_auth): Implement it. On
Windows we use a semaphore so there's no need to invalidate.
* src/posixos.c (jobserver_parse_auth): If we parse the invalid
auth string, don't set up the jobserver.
(jobserver_get_invalid_auth): Return an invalid option.
* src/variable.h (target_environment): Specify if the target
environment is for a recursive shell or non-recursive shell.
* src/variable.c (target_environment): Move checking for MAKELEVEL
into the loop rather than doing it at the end.
Along with this, check for MAKEFLAGS and MFLAGS, and update them
based on whether we're invoking a recursive or non-recursive child,
and also on whether it's necessary to invalidate the jobserver.
* src/function.c (func_shell_base): Shell functions can never be
recursive to pass 0 to target_environment().
* src/job.c (start_job_command): Specify whether the child is
recursive when calling target_environment().
* src/main.c: Export jobserver_auth. sync_mutex doesn't need to
be exported. Use the global definition for the option name.
* tests/scripts/variables/MAKEFLAGS: Add tests for $MAKEFLAGS.
* src/main.c (main): Don't reset the jobserver if the number of
slots has not changed.
(define_makeflags): Add all normal flags even when ALL is not set.
* tests/scripts/functions/shell: Test invoking make in $(shell ...).
* tests/scripts/variables/MAKEFLAGS: Test the value of MAKEFLAGS in
$(shell ...).
Commit f2771aa614 introduced a bug where some switches were left out
of MAKEFLAGS. Instead of resetting switches, get the same results by
filtering out duplicates.
* src/makeint.h: Remove reset_switches.
* src/main.c: (reset_switches): Remove reset_switches.
* (main): Remove call to reset_switches.
* (decode_switches): Filter out duplicate flags.
* src/variable.c: (set_special_var): Remove call to reset_switches.
* tests/scripts/variables/MAKEFLAGS: Verify that duplicate flags are
properly filtered out.
If GNUMAKEFLAGS was not present in the environment when we started,
don't add it.
* src/main.c (main): Don't mess with GNUMAKEFLAGS unless it exists.
* tests/scripts/variables/GNUMAKEFLAGS: Test this behavior.
Previously we always used the file->stem value as our stem in
set_file_variables(); when that wasn't correct we had to temporarily
set that value while the function was called, then reset it afterward.
This led to issues (for example when we assumed the stem was a cached
string but it wasn't).
Avoid this by passing in the stem as an argument so that different
values can be provided.
Add tests to verify this.
* src/commands.c (set_file_variables): Take second parameter stem to
relieve the callers of set_file_variables() from setting/restoring
file->stem.
* src/commands.h (set_file_variables): Ditto.
(execute_file_commands): Pass file->stem to set_file_variables().
* src/file.c (expand_deps): Pass d->stem to set_file_variables() and
remove set and restore of file->stem.
* src/implicit.c (pattern_search): Pass stem to set_file_variables()
and remove set and restore of file->stem.
* tests/scripts/features/se_explicit: Add new tests.
* tests/scripts/features/se_implicit: Ditto.
* tests/scripts/features/se_statpat: Ditto.
* tests/scripts/variables/automatic: Ditto.
POSIX Issue 8 will require a new assignment operator, :::=.
This operator behaves similarly to the BSD make := operator: the
right-hand side is expanded immediately, but then the value is
re-escaped (all '$' are converted to '$$') and the resulting variable
is considered a recursive variable: the value is re-expanded on use.
* src/variable.h (enum variable_flavor): Add f_expand flavor.
* src/variable.c (do_variable_definition): When defining f_expand,
post-process the result to re-escape '$' characters.
Remove default: to the compiler warns about un-handled enum values.
Set recursive values for both f_recursive and f_expand.
(parse_variable_definition): Rewrite this method.
The previous version was annoying to extend to ':::='.
(print_variable): Remove default: so the compiler warns us about
un-handled enum values.
* src/function.c (func_origin): Remove default: so the compiler warns
us about un-handled enum values.
* doc/make.texi: Add documentation for :::=.
* tests/scripts/variables/define: Add a test for define :::=.
* tests/scripts/variables/flavors: Add tests for :::=.
* tests/scripts/variables/negative: Add tests for :::=.
When MAKEFLAGS is set in a makefile, reparse it immediately rather
than waiting until after all makefiles have been read and parsed.
This change doesn't actually fix the SV bug referenced because, even
though we do reparse MAKEFLAGS, we don't handle the -r or -R options
immediately. Doing this will require more effort.
* NEWS: Announce the change.
* src/makeint.h: Publish reset_switches() and decode_env_switches()
from main.c
* src/main.c (main): Don't call construct_include_path(); it will be
invoked decode_switches().
Preserve the old values of builtin_rules, builtin_variables, and
job_slots before we read makefiles since they can be changed now.
(reset_switches): Publish (remove static). Set the initial value of
the stringlist list to NULL.
(decode_switches): Call construct_include_path() after decoding.
(decode_env_switches): Publish (remove static).
(define_makeflags): Set the MAKEFLAGS variable for special handling.
* src/read.c (eval_makefile): Check for empty include_directories.
(construct_include_path): Clear any old value of .INCLUDE_DIRS before
appending new values. Free the previous include_directories.
* src/variable.c (lookup_special_var): When MAKEFLAGS is set, first
reset the switches then re-parse the variable.
* tests/run_make_tests.pl: Memo-ize some default variable values.
* tests/scripts/options/dash-r: Create tests for setting -r and -R.
* tests/scripts/variables/MAKEFLAGS: Test that resetting -I from
within the makefile takes effect immediately.
Accept a "-" directory value to the -I option to clear the set of
directories to be searched up to that point, including the default
directories.
* NEWS: Announce the change.
* doc/make.texi (Summary of Options): Add documentation.
* src/read.c (construct_include_path): Check for '-' and if found,
clear the list of directories to be searched.
* tests/scripts/options/dash-I: Add tests for -I-.
* tests/scripts/variables/INCLUDE_DIRS: Add tests for -I-.
* src/read.c (parse_var_assignment): If called in a target-specific
variable context don't allow define/undefine as variable assignments.
* test/scripts/variables/define: Add a test.
* test/scripts/variables/undefine: Add a test.
Add debug options to print recipes even if they would otherwise be
silent, and to print the reason that a target was considered out of
date.
Modify --trace to simply be a shorthand for --debug=print,why.
* NEWS: Announce changes.
* doc/make.texi (Summary of Options): Document the new options.
* doc/make.1: Ditto.
* src/debug.h: Add new flags DB_PRINT and DB_WHY.
* src/makeint.h: Remove the trace_flag variable.
* src/job.c (start_job_command): Check debug flags not trace_flag.
(new_job): Ditto.
* src/main.c (trace_flag): Make a static variable for switches.
(decode_debug_flags): Set DB_PRINT and DB_WHY if trace_flag is set.
* tests/scripts/variables/GNUMAKEFLAGS: Update known-good messages.
* tests/scripts/variables/MAKEFLAGS: Ditto.
Rewrite the environment variable algorithm to correctly inherit
export settings from parent variable sets. The new algorithm
for computing the table of environment variables is:
- Start with the most local variable set and proceed to global.
- If the variable already exists in the table and we don't know
its export status, update it with the current variable's status.
- If the variable is not in the table and it's not global, add it
regardless of its status so if it's unexported we remember that.
- If the variable is not in the table and is global, check its
export status and don't add it if we won't export it.
Then when generating the environment variables, check the export
status of each variable in case it was a target-specific variable
and we have determined it should not be exported.
Rework SHELL handling to check at the end whether we added it or
not and if we didn't, add the value from the environment.
* NEWS: Announce support for target-specific "unexport"."
* doc/make.texi (Target-specific): Document the support.
* src/variable.h (enum variable_export): Make into a global type.
* src/read.c (struct vmodifiers): Use enum variable_export rather
than individual booleans.
(parse_var_assignment): Parse the "unexport" keyword.
(eval): Remember the vmodifier value in the variable.
(record_target_var): Ditto.
* src/variable.c (should_export): Check if the variable should be
exported.
(target_environment): Implement the above algorithm.
* tests/scripts/features/export: Test export/unexport with variable
assignments on the same line.
* tests/scripts/features/targetvars: Add a comprehensive suite of
tests for different types of target-specific export / unexport.
* tests/scripts/variables/SHELL: Update the comment.
Rather than having an %extraENV that is added to the default %ENV
and resetting %ENV _before_ each test, allow the test setup to
modify %ENV directly as needed then reset %ENV _after_ each test.
* tests/test_driver.pl: Remove unused %extraENV.
(resetENV): Don't add in %extraENV.
(_run_command): Reset after we run the command rather than before.
* tests/scripts/features/export: Convert %extraENV to %ENV
* tests/scripts/features/jobserver: Ditto
* tests/scripts/features/parallelism: Ditto
* tests/scripts/features/targetvars: Ditto
* tests/scripts/functions/eval: Ditto
* tests/scripts/functions/foreach: Ditto
* tests/scripts/functions/origin: Ditto
* tests/scripts/misc/general4: Ditto
* tests/scripts/options/dash-e: Ditto
* tests/scripts/targets/POSIX: Ditto
* tests/scripts/variables/GNUMAKEFLAGS: Ditto
* tests/scripts/variables/SHELL: Ditto
Previously if --no-print-directory was seen anywhere even once
(environment, command line, etc.) it would always take precedence
over any --print-directory option. Change this so that the last
seen option (which will be the command line, if present there) takes
precedence.
* NEWS: Mark this change in behavior.
* src/makeint.h (print_directory): A new variable to control printing.
* src/output.c (output_dump): Use the new variable.
(output_start): Ditto.
* src/main.c: Add a new variable print_directory. Use -1 for
print_directory_flag so we know of the option was seen or not. Add a
new default_print_directory_flag set to -1 to keep options from being
added.
(switches): Use flag_off for --no-print-directory, rather than a
separate inhibit_print_directory_flag.
(main): If print_directory_flag was set by the user, use that for
print_directory. If not, compute the print_directory value based on
-s, -C, and sub-makes as before.
* tests/scripts/variables/GNUMAKEFLAGS: -w is not added automatically
* tests/scripts/options/print-directory: Add tests for overriding
print-directory options.
Initial implementation by Christof Warlich <cwarlich@gmx.de>
* NEWS: Announce the new feature.
* doc/make.texi (Other Special Variables): Document .EXTRA_PREREQS.
* src/dep.h (struct dep): New flag to note extra prereq deps.
* src/filedef.h (expand_extra_prereqs): Declare a function to expand
the value of .EXTRA_PREREQS.
* src/file.c (expand_extra_prereqs): Given a struct variable lookup
of .EXTRA_PREREQS, convert it into a list of deps and for each one
make sure it has a struct file and has the new flag set.
(snap_file): A new function invoked by hash_map that will perform
per-file operations: set up second expansion, intermediate, and also
.EXTRA_PREREQS. Manage circular dependencies by ignoring them.
(snap_deps): Defer per-file operations until the end. Look up the
global .EXTRA_PREREQS and pass it along to snap_file for each file.
* src/implicit.c (struct patdeps): Remember the extra prereqs flag.
(pattern_search): Transfer extra prereqs flag settings into the
matched pattern rule.
* src/rule.h (snap_implicit_rules): Rename count_implicit_rules to
snap_implicit_rules since we now do more than count.
* src/rule.c (snap_implicit_rules): As we walk through all the pattern
rules, add in any global .EXTRA_PREREQS to the dep list. Ensure we
take them into account for the max number of prereqs and name length.
* src/main.c (main): Add extra-prereqs to .FEATURES.
Call the renamed snap_implicit_rules.
* tests/scripts/variables/EXTRA_PREREQS: Add tests.
This reverts commit 6264deece3.
Further investigation discovers that the real issue is that
GNU Emacs compile mode doesn't have a matching regex for GNU
make error messages generated when targets fail. I submitted
a patch to GNU Emacs adding a matcher for compile mode.
Go through both run_make_tests.pl and test_driver.pl and slightly
modernize the Perl and clean up indentation etc. Fix a number of
warnings in the test scripts detected by running with -w.
* tests/test_driver.pl: Move make error string detection out of the
base test driver.
(run_all_tests): Ensure that we always look for tests in the cwd.
* tests/run_make_tests.pl: Use File::Spec for path manipulations.
Correctly use setlocale() when detecting error strings.
Get configuration from the config-flags.pm file not config.status.
* tests/scripts/features/archives: Use new $cwddir variable.
* tests/scripts/features/reinvoke: Add missing semicolon.
* tests/scripts/features/vpath2: Avoid non-existent variable.
* tests/scripts/functions/foreach: Escape variables.
* tests/scripts/misc/bs-nl: Remove non-existing \v escape sequence.
* tests/scripts/misc/general4: Use handy create_file().
* tests/scripts/options/dash-C: Use Cwd/$cwddir.
* tests/scripts/options/dash-I: Use subst_make_string() and #PWD#.
* tests/scripts/options/symlinks: Use File::Spec.
* tests/scripts/targets/DEFAULT: Use create_file and run_make_test.
* tests/scripts/variables/CURDIR: Use run_make_test.
* tests/scripts/variables/automatic: Remove extraneous "\".
* tests/scripts/vms/library: Remove extra "my" and extraneous "\".
* tests/scripts/features/jobserver: Windows doesn't use pipes
* tests/scripts/functions/shell: Don't test kill -2 on Windows
* tests/scripts/misc/bs-nl: Windows doesn't handle single quotes
* tests/scripts/misc/general3: Ditto.
* variable.h (enum variable_flavor: Add a new flavor for appended
values that shouldn't be expanded.
* variable.c (do_variable_definition): If given this new flavor,
do not expand the value before appending it.
* read.c (eval_makefile): Use this new flavor for MAKEFILE_LIST
* tests/scripts/variables/MFILE_LIST: Test filenames containing '$'.
* doc/make.texi (Appending): Document this behavior.
* variable.c (do_variable_definition): Only add a space if the variable
value is not empty.
* tests/scripts/variables/flavors: Test this behavior.
* main.c (main): Sanitize program name detection on Windows.
* makeint.h: 'program' is a const string on all platforms now.
* tests/run_make_tests.bat: Windows bat file to invoke tests
* tests/test_driver.pl: Obtain system-specific error messages.
(get_osname): Compute the $port_type here. Add more $osname checks
for different Windows Perl ports.
(_run_command): Rewrite the timeout capability to work properly
with Windows. Don't use Perl fork/exec; instead use system(1,...)
which allows a more reliable/proper kill operation.
Also, allow options to be given as a list instead of a string, to
allow more complex quoting of command-line arguments.
* tests/run_make_tests.pl (run_make_with_options): Allow options
to be provided as a list in addition to a simple string.
(set_more_defaults): Write sample makefiles and run make on them
instead of trying to run echo and invoking make with -f-, to avoid
relying on shell and echo to get basic configuration values. Also
create a $sh_name variable instead of hard-coding /bin/sh.
* tests/scripts/features/archives: Skip on Windows.
* tests/scripts/features/escape: Use list method for passing options.
* tests/scripts/features/include: Use system-specific error messages.
* tests/scripts/features/output-sync: "Command not found" errors
generate very different / odd output on Windows. This needs to be
addressed but for now disable these tests on Windows.
* tests/scripts/functions/abspath: Disable on Windows.
* tests/scripts/functions/file: Use system-specific error messages.
* tests/scripts/functions/shell: "Command not found" errors generate
very different / odd output on Windows. This needs to be addressed
but for now disable these tests on Windows.
* tests/scripts/misc/close_stdout: Disable on Windows.
* tests/scripts/options/dash-k: Use system-specific error messages.
* tests/scripts/options/dash-l: Disable on Windows.
* tests/scripts/options/eval: Use list method for passing options.
* tests/scripts/options/general: Skip some non-portable tests.
* tests/scripts/targets/ONESHELL: Skip some non-portable tests.
* tests/scripts/targets/POSIX: Skip some non-portable tests.
* tests/scripts/variables/MAKEFILES: Skip some non-portable tests.
* tests/scripts/variables/SHELL: Use a makefile not -f- for testing.
Delay the generation of error messages for included files until we
are sure that we can't rebuild that included file.
* dep.h (struct dep): Don't reuse "changed"; make a separate field
to keep "flags". Get rid of dontcare and use the flag.
(struct goaldep): Create a new structure for goal prereqs
that tracks an errno value and the floc where the include happened.
Rework the structures to ensure they are supersets as expected.
In maintainer mode with GCC, use inline to get type checking.
* read.c (eval_makefile): Return a struct goaldep for the new
makefile. Ensure errno is set properly to denote a failure.
(read_all_makefiles): Switch to goaldep and check errno.
(eval): Don't show included file errors; instead remember them.
* remake.c (update_goal_chain): Set global variables to the current
goaldep we're building, and the entire chain.
(show_goal_error): Check if the current failure is a consequence
of building an included makefile and if so print an error.
(complain): Call show_goal_error() on rule failure.
* job.c (child_error): Call show_goal_error() on child error.
* main.c (main): Switch from struct dep to goaldep.
* misc.c (free_dep_chain): Not used; make into a macro.
* tests/scripts/features/include: Update and include new tests.
* tests/scripts/options/dash-B, tests/scripts/options/dash-W,
tests/scripts/options/print-directory,
tests/scripts/variables/MAKE_RESTARTS: Update known-good-output.
Previously if the jobserver was active, MAKEFLAGS would contain only
the -j option but not the number (not -j5 or whatever) so users
could not discover that value. Allow that value to be provided in
MAKEFLAGS without error but still give warnings if -jN is provided
on the command line if the jobserver is already activated.
* NEWS: Discuss the new behavior.
* os.h, posixos.c, w32/w32os.c: Return success/failure from
jobserver_setup() and jobserver_parse_auth().
* main.c (main): Separate the command line storage of job slots (now
in arg_job_slots) from the control storage (in job_slots). Make a
distinction between -jN flags read from MAKEFLAGS and those seen
on the command line: for the latter if the jobserver is enabled then
warn and disable it, as before.
* tests/scripts/features/jobserver: Add new testing.
For performance, we only recompute .VARIABLES when (a) it's expanded
and (b) when its value will change from a previous expansion. To
determine (b) we were checking the number of entries in the hash
table which used to work until we started undefining entries: now if
you undefine and redefine the same number of entries in between
expanding .VARIABLES, it doesn't detect any change. Instead, keep
an increasing change number.
* variables.c: Add variable_changenum.
(define_variable_in_set, merge_variable_sets): Increment
variable_changenum if adding a new variable to the global set.
(undefine_variable_in_set): Increment variable_changenum if
undefining a variable from the global set.
(lookup_special_var): Test variable_changenum not the hash table.
* tests/scripts/variables/special: Test undefining variables.
