Follow up to: https://github.com/zed-industries/zed/pull/18682
This PR tweaks the setting value, so it's clear we're referring to
`max-width`, meaning the width will change up to a specific value
depending on the available window size. Then, it also makes `Small` the
default value, which, in practice, makes the modal size the same as it
was before the original PR linked above.
Release Notes:
- N/A
---------
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
This PR adds the ability to adjust the width of the file finder popup. I
found when searching my projects the default width was not always wide
enough and there was no option to change it.
It allows values `small`, `medium` (default), `large`, `xlarge`, and
`full`
Release Notes:
- Added a setting to adjust the width of the file finder modal
Example Setting:
```json
"file_finder": {
"modal_width": "medium"
},
```
Screenshots can be found in the comments below.
Closes https://github.com/zed-industries/zed/issues/20725
Stop showing the pop-up that gets an issue open every now and then.
Release Notes:
- Stopped showing signature help after completions by default
This removes the `low_speed_timeout` setting from all providers as a
response to issue #19509.
Reason being that the original `low_speed_timeout` was only as part of
#9913 because users wanted to _get rid of timeouts_. They wanted to bump
the default timeout from 5sec to a lot more.
Then, in the meantime, the meaning of `low_speed_timeout` changed in
#19055 and was changed to a normal `timeout`, which is a different thing
and breaks slower LLMs that don't reply with a complete response in the
configured timeout.
So we figured: let's remove the whole thing and replace it with a
default _connect_ timeout to make sure that we can connect to a server
in 10s, but then give the server as long as it wants to complete its
response.
Closes#19509
Release Notes:
- Removed the `low_speed_timeout` setting from LLM provider settings,
since it was only used to _increase_ the timeout to give LLMs more time,
but since we don't have any other use for it, we simply remove the
setting to give LLMs as long as they need.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Peter Tripp <peter@zed.dev>
Follow-up of https://github.com/zed-industries/zed/pull/20507
Release Notes:
- (breaking Preview) Adjusted file finder split keybindings to be less
conflicting
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Support has been added for the ctrl-o command within insert mode. Ctrl-o
is used to partially enter normal mode for 1 motion to then return back
into insert mode.
Release Notes:
- vim: Added support for `ctrl-o` in insert mode to enter temporary
normal mode
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR exposes context server settings to extensions.
Extensions can use `ContextServerSettings::for_project` to get the
context server settings for the current project.
The `experimental.context_servers` setting has been removed and replaced
with the `context_servers` setting (which is now an object instead of an
array).
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR adds a small UI touch-up to the welcome page so we can introduce
the "Book Onboarding" over there, as well as adding it to the user menu
(both in the signed in and signed out states). The actual URL these
buttons take to will still be updated to the correct destination.
<img width="700" alt="Screenshot 2024-11-12 at 12 45 27"
src="https://github.com/user-attachments/assets/9933bf94-f57a-43e2-8da3-bfbfd9fd24d0">
Release Notes:
- N/A
This PR creates a new, revamped `DecoratedIcon` component that enables
using different SVGs, one for the knockout background and another for
the actual icon. That's different than what we were doing before—copying
the SVG and using slightly different positioning—because we wanted to
unlock an aligned knockout effect, which was particularly hard to do
with non-simple shapes such as an X.
Release Notes:
- N/A
---------
Co-authored-by: Nate Butler <1714999+iamnbutler@users.noreply.github.com>
This adds a setting to disable inline completions in language scopes to,
for example, disable them in comments or strings.
This setting can be made per language.
Examples:
```json
{
"languages": {
"Go": {
"inline_completions_disabled_in": ["comment", "string"]
}
}
}
```
```json
{
"inline_completions_disabled_in": ["comment"]
}
```
Closes#9133
Release Notes:
- Added language setting to disable inline comments in certain scopes.
Example: `{"languages": {"Go": {"inline_completions_disabled_in":
["comment", "string"]}}}`
Co-authored-by: Bennet <bennet@zed.dev>
Follow-up of https://github.com/zed-industries/zed/pull/20419
Release Notes:
- - (breaking change) Use `ctrl-right` instead of `cmd-right` as a macOS
default for `editor::AcceptPartialInlineCompletion` (Linux)
Closes #16343Closes#10972
Release Notes:
- (breaking change) On macOS when using a keyboard that supports an
extended Latin character set (e.g. French, German, ...) keyboard
shortcuts are automatically updated so that they can be typed without
`option`. This fixes several long-standing problems where some keyboards
could not type some shortcuts.
- This mapping works the same way as
[macOS](https://developer.apple.com/documentation/swiftui/view/keyboardshortcut(_:modifiers:localization:)).
For example on a German keyboard shortcuts like `cmd->` become `cmd-:`,
`cmd-[` and `cmd-]` become `cmd-ö` and `cmd-ä`. This mapping happens at
the time keyboard layout files are read so the keybindings are visible
in the command palette. To opt out of this behavior for your custom
keyboard shortcuts, set `"use_layout_keys": true` in your binding
section. For the mappings used for each layout [see
here](a890df1863/crates/settings/src/key_equivalents.rs (L7)).
---------
Co-authored-by: Will <will@zed.dev>
Both `editor::AcceptPartialInlineCompletion` and the keybinding for
`editor::MoveToEndOfLine` had the same keybinding inside the editor, and
with Supermaven's fast proposals, it's been very frequently used
incorrectly.
Closes #ISSUE
Release Notes:
- (breaking change) Use `ctrl-right` instead of `cmd-right` as a macOS
default for `editor::AcceptPartialInlineCompletion`
Closes https://github.com/zed-industries/zed/issues/20187
Make outline panel more eager to open its entries:
* scroll editor to selected outline entries (before it required an extra
`"outline_panel::Open", { "change_selection": false }` action call)
* make any `Open` action call to behave like `"outline_panel::Open", {
"change_selection": true }` and remove the redundant parameter.
Now opening an entry is equal to double clicking the same entry: the
editor gets scrolled and its selection changes
* add a way to open entries the same way as excerpts are open in multi
buffers (will open the entire file, scroll and place the caret)
* additionally, fix another race issue that caused wrong entry to be
revealed after the selection change
Release Notes:
- Improved outline panel keyboard navigation
Closes#7688
Release Notes:
- (breaking change) Stop binding keyboard shortcuts to alt-[a-z]. These
get in the way of typing characters. This is usually not an issue for
English speakers because we don't use many characters; but for other
Latin-based languages with diacritics our shortcuts prevent them typing
what they need to type.
This primarily affects Zed's extra features:
* `alt-q` => `cmd-k q` on maOS, `ctrl-k q` on Linux for `editor::Rewrap`
* `alt-z` => `cmd-k z` on macOS `ctrl-k z` on Linux for
`editor::ToggleSoftWrap`
* `alt-m` => `ctrl-shift-m` for `assistant::ToggleModelSelector`
* `alt-v` => `ctrl-shift-v` for `["editor::MovePageUp", {
"center_cursor": true }]` (macOS only)
* `alt-t` => `cmd-shift-r` on maOS, `ctrl-shift-r` on Linux for
`task::Spawn` (The previous binding for `editor::RevealInFileManager`
now only applies in the project panel)
* `alt-shift-t` => `alt-cmd-r` on maOS, `ctrl-alt-r` on Linux for
`task::Rerun`
* `alt-shift-f` => `ctrl-shift-f` for
`project_panel::SearchInDirectory`.
But also overrides some bindings from Readline.
* `alt-h` => `alt-backspace` for `editor::DeleteToPreviousWordStart`
* `alt-d` => `alt-delete` for `editor::DeleteToNextWordEnd`
* `alt-f` => `ctrl-f` for `editor:: MoveToNextWordEnd` (`ctrl-f` was
previously `editor::MoveRight`)
* `alt-b` => `ctrl-b` for `editor::MoveToNextWordStart` (`ctrl-b` was
previously `editor::MoveLeft`)
Note that `alt-t` and `alt-shift-t` have been kept as aliases (because
no-one complained about `t` yet; but we may remove them completely in
the future).
Follow up to https://github.com/zed-industries/zed/pull/20242
This PR ensures all the actions to the right of the project search
inputs have the same minimum width, ensuring that the inputs themselves
are always aligned. In the previous PR, I didn't considered the scenario
where the project search numbers where beyond 4 or 5 digits, which then
increased their width. This should be treated now!
<img width="700" alt="Screenshot 2024-11-07 at 09 55 11"
src="https://github.com/user-attachments/assets/7a9d8ebd-b575-4141-9242-3044f00150c5">
Release Notes:
- N/A
Lily over on discord noticed two of the colors in our Solarized themes
were off by a single point. The two colors are nearly indistinguishable,
so we might as well unify them.
This PR does exactly that.
Release Notes:
- N/A
Closes#5334Closes#15521
Improve contrast across the board in default One themes.
We are currently building out some theme tools to make improvements to
contrast and tweaking themes in general easier, so these should continue
to improve over time.
**Light**
Before | After
**Dark**
Before | After
**Note 1**: there are more improvements to be made, but this should deal
with the most egregious issues.
Release Notes:
- Improved contrast in default One themes
This PR is only updating UI strings and pieces of the documentation—it
doesn't touch the actual code, where it's still using things such as
`NewContext` and similar terminology for variables, actions, etc.
Release Notes:
- N/A
Closes#12529Closes#8639
Release Notes:
- Added option to dim inactive panes
([#12529](https://github.com/zed-industries/zed/issues/12529))
- Added option to highlight active pane with a border
([#8639](https://github.com/zed-industries/zed/issues/8639))
BREAKING: `active_pane_magnification` value is no longer used, it should
be migrated to `active_pane_modifiers.magnification`
> note: don't know much rust, so I wouldn't be surprised if stuff can be
done much better, happy to update things after the review.
Also, wasn't sure about introducing the new object in the settings, but
it felt better than adding two more keys to the root, let me know what
you think and if there's a better way to do this. Also happy to get
feedback on the text itself, as I didn't spend much thinking how to
document this.
This PR's most relevant change is removing the three-dot menu dropdown
from the assistant toolbar. The "Regenerate Title" button is now only
visible on hover and it appears on the far right of the title input.
<img width="700" alt="Screenshot 2024-11-04 at 13 31 37"
src="https://github.com/user-attachments/assets/891703af-7985-4b16-bb5e-d852491abd6f">
Release Notes:
- N/A
JetBrains IDE's use `ctrl-w` and `ctrl-shift-w` on Win/Linux and
`cmd-up` and `cmd-down` on mac to extend/shrink selections.
https://www.jetbrains.com/guide/java/tips/extend-selection/
Release Notes:
- Fixed extend/shrink selection on JetBrains keymap
Closes#13376Closes#13338
Release Notes:
- Fixed unhelpful auto-indent suggestions in markdown.
- Added `auto_indent_on_paste` setting, which can be used on a
per-language basis, to configure whether indentation should be adjusted
when pasting. This setting is enabled by default for languages other
than YAML and Markdown.
Closes#19417
Release Notes:
- vim : Added `r` and `a` as aliases for `[` and `<` text objects
(copying vim-surround).
- vim: (breaking change) rebound the function argument text object to
`g`.
- vim: Fixed surrounds to allow `b`/`B`/`r`/`a` anywhere you could use
`(`, `{`, `[`, `<`.
---
- vim: Added `b`, `B`, `r`, `s`, `a` as aliases for `()`, `{}`, `[]`,
`<>` in vim surround mode.
- Adds a new `surround_alias` function where aliases are defined.
- This function is used in `find_surround_pairs` to substitute the
chosen text with the alias
- The keymap is also modified to add support for Square and Angle
brackets when changing surrounds. These two were added to follow the
example of Tim Pope's ubiquitous `vim-surround` plugin.
- I had to overwrite the `vim::Argument` keybind in order to do this. I
moved it to use the `g` modifier. I realize this is a breaking change
and will happily move the `vim::AngleBracket` keymap to a different
letter if you'd like to avoid this. I'm just trying to keep with
convention. Ideally, Users would be able to define surround aliases
themselves in the config file but that's a much bigger task than I'm
able to do right now.
- I also added tests for the new aliases.
Thanks for making such a clean and organized codebase. I was able to
find the relevant section of code rather quickly thanks to this.
Release Notes:
- vim: Add `ctrl-v`/`ctrl-q` to type any unicode code point. For example
`ctrl-v escape` inserts an escape character(U+001B), or `ctrl-v u 1 0 E
2` types ტ (U+10E2). As in vim `ctrl-v ctrl-j` inserts U+0000 not
U+000A. Zed does not yet implement insertion of the vim-specific
representation of the typed keystroke for other keystrokes.
- vim: Add `ctrl-shift-v` as an alias for paste on Linux
This spawns the runnable task that that's closest to the cursor.
One thing missing right now is that it doesn't find tasks that are
attached to non-outline symbols, such as subtests in Go.
Release Notes:
- Added a new reveal option for tasks: `"no_focus"`. If used, the tasks
terminal panel will be opened and shown, but not focused.
- Added a new `editor: spawn nearest task` action that spawns the task
with a run indicator icon nearest to the cursor. It can be configured to
also use a `reveal` strategy. Example:
```json
{
"context": "EmptyPane || SharedScreen || vim_mode == normal",
"bindings": {
", r t": ["editor::SpawnNearestTask", { "reveal": "no_focus" }],
}
}
```
Demo:
https://github.com/user-attachments/assets/0d1818f0-7ae4-4200-8c3e-0ed47550c298
---------
Co-authored-by: Bennet <bennet@zed.dev>
Now if you try to do Suggest Edits without a file context, you see this
(and it doesn't run the query).
<img width="635" alt="Screenshot 2024-10-30 at 10 51 24 AM"
src="https://github.com/user-attachments/assets/a3997ba6-98a9-4bfa-81b6-1d8579c26fd7">
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
This is the start of a notebook UI for Zed.
`🔔 Note: This won't be useable yet when it is merged! Read below. 🔔`
This is going to be behind a feature flag so that we can merge this
initial PR and then make follow up PRs. Release notes will be produced
in a future PR.
Minimum checklist for merging this:
* [x] All functionality behind the `notebooks` feature flag (with env
var opt out)
* [x] Open notebook files in the workspace
* [x] Remove the "Open Notebook" button from title bar
* [x] Incorporate text style refinements for cell editors
* [x] Rely on `nbformat` crate for parsing the notebook into our
in-memory format
* [x] Move notebook to a `gpui::List`
* [x] Hook up output rendering
Release Notes:
- N/A
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Add an edit button to the assistant. This is totally hacked in for now,
just to see how this would feel rendered simply in the UI.
cc @as-cii @danilo-leal
Release Notes:
- N/A
---------
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
This PR ensures that we do not have to break the indent guides settings
for the project/outline panel. In the future we might want to have a
more granular way to control when to show indent guides, or control
other indent guide properties, like its width.
Release Notes:
- N/A
