This changes the `/workflow` command so that instead of emitting edits
in separate steps, the user is presented with a single tab, with an
editable diff that they can apply to the buffer.
Todo
* Assistant panel
* [x] Show a patch title and a list of changed files in a block
decoration
* [x] Don't store resolved patches as state on Context. Resolve on
demand.
* [ ] Better presentation of patches in the panel
* [ ] Show a spinner while patch is streaming in
* Patches
* [x] Preserve leading whitespace in new text, auto-indent insertions
* [x] Ensure patch title is very short, to fit better in tab
* [x] Improve patch location resolution, prefer skipping whitespace over
skipping `}`
* [x] Ensure patch edits are auto-indented properly
* [ ] Apply `Update` edits via a diff between the old and new text, to
get fine-grained edits.
* Proposed changes editor
* [x] Show patch title in the tab
* [x] Add a toolbar with an "Apply all" button
* [x] Make `open excerpts` open the corresponding location in the base
buffer (https://github.com/zed-industries/zed/pull/18591)
* [x] Add an apply button above every hunk
(https://github.com/zed-industries/zed/pull/18592)
* [x] Expand all diff hunks by default
(https://github.com/zed-industries/zed/pull/18598)
* [x] Fix https://github.com/zed-industries/zed/issues/18589
* [x] Syntax highlighting doesn't work until the buffer is edited
(https://github.com/zed-industries/zed/pull/18648)
* [x] Disable LSP interaction in Proposed Changes editor
(https://github.com/zed-industries/zed/pull/18945)
* [x] No auto-indent? (https://github.com/zed-industries/zed/pull/18984)
* Prompt
* [ ] make sure old_text is unique
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
This PR does a little bit of a touch-up on the copywriting on the
assistant config UI. I had friends reporting to me that some of the
writing could be clearer, and hopefully, this goes into that direction!
Release Notes:
- N/A
This PR improves adding and working with icons by using the new
`DerivePathStr` to derive icon paths.
This means paths no longer need to be manually specified, and the
`IconName` and file name will always be consistent between icons.
This PR does not do any work to standardize icons visually, remove
unused icons, or any other such cleanup.
Release Notes:
- N/A
This PR adds new SVGs for the pin and unpin icons, using a custom-made
one in a smaller size, and thus removing the `PinAlt` one I added just
recently. I also tweak the outline panel pin icon button tooltip strings
a bit.
Release Notes:
- N/A
This adds a new button that on click, accepts the suggestion but does
not run the generated command.
https://github.com/user-attachments/assets/426b0ff3-8e19-435a-aa7f-89e062aefd4c
@danilo-leal @iamnbutler Any ideas on how to make both options
discoverable without having an extra button?
Release Notes:
- Added a way to accept terminal inline assist suggestions without
executing them
---------
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Prototypes a way to display new entities in the outline panel, making it
less outline.
The design is not final and might be adjusted, but the workflow seems to
be solid enough to keep and iron it out.
* Now, when any project search buffer is activated (multi buffer mode),
or buffer search is open (singleton buffer mode, but is available for
search usages multi buffer too — in that case buffer search overrides
multi buffer's contents display), outline panel displays all search
matches instead of the outline items.
Outline items are not displayed at all during those cases, unless the
buffer search is closed, or a new buffer gets opened, of an active
buffer search matches zero items.
https://github.com/user-attachments/assets/4a3e4faa-7f75-4522-96bb-3761872c753a
* For the multi buffer mode, search matches are grouped under
directories and files, same as outline items
* For buffer search , search matches are displayed one under another
For both cases, the entire match line is taken and rendered, with the
hover tooltip showing the line number.
So far it does not look very bad, but I am certain there are bad cases
with long lines and bad indents where it looks not optimal — this part
most probably will be redesigned after some trial.
Or, maybe, it's ok to leave the current state if the horizontal
scrollbar is added?
Clicking the item navigates to the item's position in the editor.
Search item lines are also possible to filter with the outline panel's
filter input.
* Inline panel is now possible to "pin" to track a currently active
editor, to display outlines/search results for that editor even if
another item is activated afterwards:
This is useful in combination with project search results display: now
it's possible to leave the search results pinned in the outline panel
and jump to every search result and back.
If the item the panel was pinned to gets closed, the panel gets back to
its regular state, showing outlines/search results for a currently
active editor.
Release Notes:
- Added a way to display buffer/project search entries in the outline
panel
Release Notes:
- Adds UI affordances to the assistant panel to show which messages have
been cached
- Migrate cache invalidation to be based on `has_edits_since_in_range`
to be smarter and more selective about when to invalidate the cache and
when to fetch.
<img width="310" alt="Screenshot 2024-08-16 at 11 19 23 PM"
src="https://github.com/user-attachments/assets/4ee2d111-2f55-4b0e-b944-50c4f78afc42">
<img width="580" alt="Screenshot 2024-08-18 at 10 05 16 PM"
src="https://github.com/user-attachments/assets/17630a60-7b78-421c-ae39-425246638a12">
I had originally added the lightening bolt on every message and only
added the tooltip warning about editing prior messages on the first
anchor, but thought it looked too busy, so I settled on just annotating
the last anchor.
This commit adds a custom icon for Anthropic hosted models.
- Adding a new SVG icon for Anthropic hosted models.
- The new icon is located at: `assets/icons/ai_anthropic_hosted.svg`
- Updating the LanguageModel trait to include an optional icon method
- Implementing the icon method for CloudModel to return the custom icon
for Anthropic hosted models
- Updating the UI components to use the model-specific icon when
available
- Adding a new IconName variant for the Anthropic hosted icon
We should change the non-hosted icon in some small way to distinguish it
from the hosted version. I duplicated the path for now so we can
hopefully add it for the next release.
Release Notes:
- N/A
- [x] Put the slash command popover on the footer
- [x] Refine the popover (change it to a picker)
- [x] Add more options dropdown on the assistant's toolbar
- [x] Add quote selection button on the footer
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Fixes#15923
Release Notes:
- Assistant workflow steps can now be applied and reverted directly from
within the assistant panel.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Antonio <antonio@zed.dev>
When pressing <kbd>control</kbd> + <kbd>enter</kbd>, the AI-powered
inline transformation input displays an icon button and a token count,
which should show roughly the same numbers you'd see on your assistant
panel. At a first glance, though, the token count not being zero can be
confusing, where you'd wonder where that's coming from. That's because
the inline input uses whatever piece of context and/or information of
the currently selected assistant tab to suggest more accurate edits.
So, this PR introduces an informative piece of text to the
`ModelSelector` menu, on the inline transformation input, which delivers
exactly this bit of info, aimed at clarifying the connection between
these two methods of interacting with LLMs.
I've also took the opportunity to change the icon button's icon to one
that's a bit easier to see, still representing the affordance of "click
to configure something".
Release Notes:
- Add note about how inline edits consume context from the assistant
panel to clarify interaction with LLMs.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR increases the size of the the icon buttons within the inline
editors, both within the buffer and on the terminal. I also added
properties to make sure they always render as a square, as well as
tweaking the stop icon SVG, adding an alternative sparkle icon that fit
the same grid as the close (14x14) icon, and adding a bit more right
padding on the buffer's case so it doesn't collide with the scrollbar.
End result is that they have a bit of an easier target space area and
normalized sizes.
---
Release Notes:
- N/A
TODO:
- [x] Actions run from menu not firing
- [x] Menu differentiates idle and busy for running kernel
Menu States:
- [x] No session && no support known
No session && no kernel installed for languages of known support
- (TODO after) Intro to REPL
- [x] Link to docs
No session but can start one
- [x] Start REPL
- (TODO after) More info -> Docs?
Yes Session
- [x] Info: Kernel name, language
example: chatlab-3.7-adsf87fsa (Python)
example: condapy-3.7 (Python)
- [x] Change Kernel -> https://zed.dev/docs/repl#change-kernel
- ---
- [x] Run
- [x] Interrupt
- [x] Clear Outputs
- ---
- [x] Shutdown
(Release notes left empty as the change will be documented in the REPL
release!)
Reserved for a follow on PR:
```
- [ ] Status should update when the menu is open (missing `cx.notify`?)
- [ ] Shutdown all kernels action
- [ ] Restart action
- [ ] [Default kernel changed - restart (this kernel) to apply] // todo!(kyle): need some kind of state thing that says if this has happened
```
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Continuing from #13597, this PR refactors platform controls to extract a
generic set of platform controls that can be used for any platform that
does not define it's own/we don't use the system ones.
In the future, these controls will likely be used as a fallback on
windows as well when the windows icon font isn't available.
Release Notes:
- Added updated window controls on Linux
Adds some of the UI components to allow us to visually render settings.
These are UI only and are not functional yet (@maxdeviant will be
working on these when he is back.)
You can see some examples by running `script/storybook setting`.
Release Notes:
- N/A
TODO:
- [x] Moving the cursor out of the title editor should unselect any
selected text
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Richard <richard@zed.dev>
### TODO
- [x] Make sure keybinding shows up in pane + menu
- [x] Selection tool in the editor toolbar
- [x] Application Menu
- [x] Add more options to pane + menu
- Go to File...
- Go to Symbol in Project...
- [x] Add go items to the selection tool in the editor:
- Go to Symbol in Editor...
- Go to Line/Column...
- Next Problem
- Previous Problem
- [x] Fix a bug where modals opened from a context menu aren't focused
correclty
- [x] Determine if or what needs to be done with project actions:
- Difficulty is that these are exposed in the UI via clicking the
project name in the titlebar or by right clicking the root entry in the
project panel. But they require reading and are two clicks away. Is that
sufficient?
- Add Folder to Project
- Open a new project
- Open recent
- [x] Get a style pass
- [x] Implement style pass
- [x] Fix the wrong actions in the selection menu
- [x] Show selection tool toggle in the 'editor settings' thing
- [x] Put preferences section from the app menu onto the right hand user
menu
- [x] Add Project menu into app menu to replace 'preferences' section,
and put the rest of the actions there
- [ ] ~~Adopt `...` convention for opening a surface~~ uncertain what
this convention is.
- [x] Adopt link styling for webview actions
- [x] Set lucide hamburger for menu icon
- [x] Gate application menu to only show on Linux and Windows
Release Notes:
- Added a 'selection and movement' tool to the Editor's toolbar, as well
as controls to toggle it and a setting to remove it (`"toolbar":
{"selections_menu": true/false }`)
- Changed the behavior of the `+` menu in the tab bar to use standard
actions and keybindings. Replaced 'New Center Terminal' with 'New
Terminal', and 'New Search', with the usual 'Deploy Search'. Also added
item-creating actions to this menu.
- Added an 'application' menu to the titlebar to Linux and Windows
builds of Zed
This could still use some improvement UI-wise but the user experience
should be a lot better.
- [x] Show in "Window" application menu
- [x] Load prompt as it's selected in the picker
- [x] Refocus picker on `esc`
- [x] When creating a new prompt, if a new prompt already exists and is
unedited, activate it instead
- [x] Add `/default` command
- [x] Evaluate /commands on prompt insertion
- [x] Autocomplete /commands (but don't evaluate) during prompt editing
- [x] Show token count using the settings model, right-aligned in the
editor
- [x] Picker
- [x] Sorted alpha
- [x] 2 sublists
- Default
- Empty state: Star a prompt to add it to your default prompt
- Otherwise show prompts with star on hover
- All
- Move prompts with star on hover
Release Notes:
- N/A
Using the file system as a database seems like it's easy, but it's
actually a real pain. I'd like to use LMDB to store the prompts locally
so we have more control. We can always add an export option, but I want
the source of truth to be somewhere other than the file system.
So far, I have a PromptStore which is global to the application and can
be initialized on startup. Then there's a `PromptLibrary` which is
intended to be the root of a new kind of Zed window. I haven't actually
seen pixels yet, but I've sketched out the basics needed to create a new
prompt, save, etc.
Still lots to figure out but the foundations of being backed by a DB and
rendering in an independent window are in place.
/cc @iamnbutler @as-cii
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR sorts the `file_types.json` file alphabetically.
This is the command I used to sort it:
```
pnpm --package=json-sort-cli dlx jsonsort assets/icons/file_icons/file_types.json
```
Release Notes:
- N/A
- Confirming a completion now runs the command immediately
- Hitting `enter` on a line with a command now runs it
- The output of commands gets folded away and replaced with a custom
placeholder
- Eliminated ambient context
<img width="1588" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/b1927a45-52d6-4634-acc9-2ee539c1d89a">
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Adds the following features to the prompt manager:
- New prompt – Create a new prompt from the UI. It will only persist if
it is saved.
- Save prompt – Save a prompt by clicking the save button in the UI. A
keybinding will be added for this in the future.
- Reveal prompt - Show the selected prompt on the file system. Only
available for saved prompts.
New prompts that are saved will use the
`{slugified_title}_{ver}_{id}.md` format which all imported prompts will
move to in the near future.
Also orders prompts in alphabetical order by default.
Release Notes:
- N/A
