This PR improves the installation checks for `vtsls`.
Previously we were checking the installed version of TypeScript against
the latest available version to determine whether we needed to installed
the `vtsls` language server or not.
However, these are two independent concerns, so we should be checking
individually whether `typescript` or `@vtsls/language-server` need to be
installed/updated.
Closes https://github.com/zed-industries/zed/issues/18349.
Release Notes:
- typescript: Fixed an issue where `@vtsls/language-server` may not have
been updated to the latest version.
Before: (note the 1.3k in the upper right corner instead of 3 in the
second screenshot)
<img width="459" alt="Screenshot 2024-11-04 at 11 37 58 AM"
src="https://github.com/user-attachments/assets/64c06aff-f7d2-42a4-a767-0d7a4ba0f486">
Now:
<img width="631" alt="Screenshot 2024-11-04 at 11 38 11 AM"
src="https://github.com/user-attachments/assets/22af974d-915a-41e1-9ee0-f0622901e242">
This was intended to be a conservative estimate in case you pressed
Suggest Edits (and therefore might have an unpleasant surprise if you
were under the context limit but Suggest Edits failed with a "too much
context" error message anyway, after the Suggest Edits context got added
for you behind the scenes).
However, in retrospect this design created more [confusion in the common
case](https://github.com/zed-industries/zed/pull/19900#issuecomment-2453456569)
because it made it look like more context had been actually consumed
than what was actually consumed.
This does raise a potential design question for the future: the Suggest
Edits button adds more context at the last minute without ever
communicating that it's going to do that.
In the meantime it seems best to go back to the less-confusing way of
reporting the token counts, especially since only users of the
experimental flag could possibly press Suggest Edits anyway.
Release Notes:
- Fixed issue where initial token count was over-reported as 1.3k
instead of 3 (for the context string "You").
Closes#13376Closes#13338
Release Notes:
- Fixed unhelpful auto-indent suggestions in markdown.
- Added `auto_indent_on_paste` setting, which can be used on a
per-language basis, to configure whether indentation should be adjusted
when pasting. This setting is enabled by default for languages other
than YAML and Markdown.
Closes#16969
Release Notes:
- Fixed a bug in macOS Sequoia where you can't save a new file as
`*.sql`, it would rename to `.sql.s`. As a side effect you can no longer
save a new file as `*sql.s`. We hope to remove this workaround when the
operating system fixes its bug; in the meantime you can either set
`"use_system_path_prompts": false` in your settings file to skip the
macOS dialogues, or create new files by right clicking in the project
panel.
Further enhancement:
On exploring VSCode's sorting logic, there are two major distinctions:
* A config option exists to adjust sort priority of snippets. They can
be placed inline (default), top or at bottom of completitions.
* The sorting order sorts by (in order): sort_text (lower case),
sort_text, kind
ref:
6f2d4781e8/src/vs/editor/contrib/suggest/browser/suggest.ts (L338-L383)Closes#19786
Release Notes:
- Improved sort order in completions to show relevant matches first
([#19786](https://github.com/zed-industries/zed/issues/19786))
This PR updates all settings that are defined as `Option`s to include
`null` in their type.
This prevents warnings from being displayed when `null` is used a
default value.
Closes https://github.com/zed-industries/zed/issues/18006.
Release Notes:
- Updated the settings schema to allow `null` as a value for optional
settings instead of showing a warning.
Related to: https://github.com/zed-industries/zed/issues/19022
Release Notes:
- Improve editor performance with large # of diagnostics.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR updates the `buffer_font_fallbacks` and `ui_font_fallbacks`
settings to allow `null` as a value instead of showing a warning.
Related to https://github.com/zed-industries/zed/issues/18006.
Release Notes:
- Updated the settings schema to allow `null` as a value for
`buffer_font_fallbacks` and `ui_font_fallbacks` instead of showing a
warning.
This PR extracts the `render_item` implementation for outlines to the
`outline` crate to help reduce `language`'s dependence on `theme`.
Release Notes:
- N/A
Closes#19417
Release Notes:
- vim : Added `r` and `a` as aliases for `[` and `<` text objects
(copying vim-surround).
- vim: (breaking change) rebound the function argument text object to
`g`.
- vim: Fixed surrounds to allow `b`/`B`/`r`/`a` anywhere you could use
`(`, `{`, `[`, `<`.
---
- vim: Added `b`, `B`, `r`, `s`, `a` as aliases for `()`, `{}`, `[]`,
`<>` in vim surround mode.
- Adds a new `surround_alias` function where aliases are defined.
- This function is used in `find_surround_pairs` to substitute the
chosen text with the alias
- The keymap is also modified to add support for Square and Angle
brackets when changing surrounds. These two were added to follow the
example of Tim Pope's ubiquitous `vim-surround` plugin.
- I had to overwrite the `vim::Argument` keybind in order to do this. I
moved it to use the `g` modifier. I realize this is a breaking change
and will happily move the `vim::AngleBracket` keymap to a different
letter if you'd like to avoid this. I'm just trying to keep with
convention. Ideally, Users would be able to define surround aliases
themselves in the config file but that's a much bigger task than I'm
able to do right now.
- I also added tests for the new aliases.
Thanks for making such a clean and organized codebase. I was able to
find the relevant section of code rather quickly thanks to this.
We've received feedback that it wasn't clear how to cancel/interrupt the
LLM while it's generating a response. Additionally, I also had folks
telling me that the loading state was hard to notice—the pulsating
animation is too subtle on its own. This PR attempts to improve both of
these things. The end result is:
Release Notes:
- N/A
I was missing the `go generate` runnable from other editors so I figured
I'd implement one here! Now, comments of the form `//go:generate` can
prompt for the `go generate <package>` task. Meanwhile, I've also added
a global `go generate ./...` task.
~When making the global task, I noticed that the existing `go test
./...` task runs tests in subdirectories of the CWD of the active
editor, whereas I would really expect it to run all tests across my
project. I have changed to use the latter behavior (run relative to
project root) for both `go generate ./...` and `go test ./...`. Please
let me know if the prior behavior was intended, and I can revert.~
Release Notes:
- Added runnable and tasks for `go generate` commands
Closes#4324
Release Notes:
- Fixed an issue where single-clicking on a file in the project panel
would not focus the editor, when preview tabs are disabled
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Max <max@zed.dev>
This PR reverts #20076 to turn the `ThemeRegistry` back into a regular
struct again.
It doesn't actually help us by having it behind a trait.
Release Notes:
- N/A
This PR adds a new `extension` crate, containing some contents extracted
from the `extension_host`.
Right now it contains just the `ExtensionManifest` and
`ExtensionBuilder`, although we may move more of the extension interface
into here.
The introduction of the `extension` crate allows us to depend on it in
the `extension_cli`, thereby eliminating the need for the `no-webrtc`
feature on a number of crates.
Release Notes:
- N/A
This PR renames the `extension` crate to `extension_host`.
This is to free up the name so that we can create a smaller-scoped
`extension` crate.
Release Notes:
- N/A
This PR converts the `ThemeRegistry` type into a trait instead of a
concrete implementation.
This allows for the extension store to depend on an abstraction rather
than the concrete theme registry implementation.
We currently have two `ThemeRegistry` implementations:
- `RealThemeRegistry` — this was previously the `ThemeRegistry` and
contains the real implementation of the registry.
- `VoidThemeRegistry` — a null object that doesn't have any behavior.
Release Notes:
- N/A
## Problem statement
I want to add keyboard navigation support to SSH modal. Doing so is
possible in current landscape, but not particularly ergonomic;
`gpui::ScrollHandle` has `scroll_to_item` API that takes an index of the
item you want to scroll to. The problem is, however, that it only works
with it's immediate children - thus in order to support scrolling via
keyboard you have to bend your UI to have a particular layout. Even when
your list of items is perfectly flat, having decorations inbetween items
is problematic as they are also children of the list, which means that
you either have to maintain the mapping to devise a correct index of an
item that you want to scroll to, or you have to make the decoration a
part of the list item itself, which might render the scrolling imprecise
(you might e.g. not want to scroll to a header, but to a button beneath
it).
## The solution
This PR adds `ScrollAnchor`, a new kind of handle to the gpui. It has a
similar role to that of a ScrollHandle, but instead of tracking how far
along an item has been scrolled, it tracks position of an element
relative to the parent to which a given scroll handle belongs. In short,
it allows us to persist the position of an element in a list of items
and scroll to it even if it's not an immediate children of a container
whose scroll position is tracked via an associated scroll handle.
Additionally this PR adds a new kind of the container to the UI crate
that serves as a convenience wrapper for using ScrollAnchors. This
container provides handlers for `menu::SelectNext` and
`menu::SelectPrev` and figures out which item should be focused next.
Release Notes:
- Improve keyboard navigation in ssh modal
Release Notes:
- vim: Add `ctrl-v`/`ctrl-q` to type any unicode code point. For example
`ctrl-v escape` inserts an escape character(U+001B), or `ctrl-v u 1 0 E
2` types ტ (U+10E2). As in vim `ctrl-v ctrl-j` inserts U+0000 not
U+000A. Zed does not yet implement insertion of the vim-specific
representation of the typed keystroke for other keystrokes.
- vim: Add `ctrl-shift-v` as an alias for paste on Linux
This PR adds a bit of telemetry for Anthropic models, in order to
understand model health. With this logging, we can monitor and diagnose
dips in performance, for example due to model rollouts.
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR adds a theme preview tab to help get an at a glance overview of
the styles in a theme.
You can open it using `debug: open theme preview`.
The next major theme preview PR will move this into it's own crate, as
it will grow substantially as we add content.
Next for theme preview:
- Update layout to two columns, with controls on the right for selecting
theme, layer/elevation-index, etc.
- Cover more UI elements in preview
- Display theme colors in a more helpful way
- Add syntax & markdown previews
Release Notes:
- Added a way to preview the current theme's styles with the `debug:
open theme preview` command.
This PR adds a `/streaming-example` slash command for the purposes of
showcasing streaming during development.
This slash command is only available to staff and isn't intended to be
shipped to the general public.
Release Notes:
- N/A
* Implement `clone_on_split` to allow splitting a notebook into another
pane
* Switched to `tab_content` in `impl Item for NotebookEditor` to show
both the notebook name and an icon
* Added placeholder methods and TODOs for future work, such as saving,
reloading, and search functionality within the notebook editor.
* Started moving more core `Model` bits into `NotebookItem`, including
pulling the language of the notebook (which affects every code cell)
* Loaded notebook asynchronously using `fs`
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
