Currently in Zed, certain characters require pressing the key twice to
move the caret through that character. For example: "❤️" and "y̆".
The reason for this is as follows:
Currently, Zed uses `chars` to distinguish different characters, and
calling `chars` on `y̆` will yield two `char` values: `y` and `\u{306}`,
and calling `chars` on `❤️` will yield two `char` values: `❤` and
`\u{fe0f}`.
Therefore, consider the following scenario (where ^ represents the
caret):
- what we see: ❤️ ^
- the actual buffer: ❤ \u{fe0f} ^
After pressing the left arrow key once:
- what we see: ❤️ ^
- the actual buffer: ❤ ^ \u{fe0f}
After pressing the left arrow key again:
- what we see: ^ ❤️
- the actual buffer: ^ ❤ \u{fe0f}
Thus, two left arrow key presses are needed to move the caret, and this
PR fixes this bug (or this is actually a feature?).
I have tried to keep the scope of code modifications as minimal as
possible. In this PR, Zed handles such characters as follows:
- what we see: ❤️ ^
- the actual buffer: ❤ \u{fe0f} ^
After pressing the left arrow key once:
- what we see: ^ ❤️
- the actual buffer: ^ ❤ \u{fe0f}
Or after pressing the delete key:
- what we see: ^
- the actual buffer: ^
Please note that currently, different platforms and software handle
these special characters differently, and even the same software may
handle these characters differently in different situations. For
example, in my testing on Chrome on macOS, GitHub treats `y̆` as a
single character, just like in this PR; however, in Rust Playground,
`y̆` is treated as two characters, and pressing the delete key does not
delete the entire `y̆` character, but instead deletes `\u{306}` to yield
the character `y`. And they both treat `❤️` as a single character,
pressing the delete key will delete the entire `❤️` character.
This PR is based on the principle of making changes with the smallest
impact on the code, and I think that deleting the entire character with
the delete key is more intuitive.
Release Notes:
- Fix caret movement issue for some special characters
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
This PR renames `language::Buffer::new` to `language::Buffer::local` and
simplifies its interface. Instead of taking a replica id (which should
always be 0 for the local case) and a `BufferId`, which was awkward and
verbose to construct, it simply takes text and a `cx`.
It uses the `cx` to derive a `BufferId` from the `EntityId` associated
with the `cx`, which should always be positive based on the following
analysis...
We convert the entity id to a u64 using this method on `EntityId`, which
is defined by macros in the `slotmap` crate:
```rust
pub fn as_ffi(self) -> u64 {
(u64::from(self.version.get()) << 32) | u64::from(self.idx)
}
```
If you look at the type of `version` in `KeyData`, it is non-zero:
```rust
#[derive(Clone, Copy, PartialEq, Eq, PartialOrd, Ord, Hash)]
pub struct KeyData {
idx: u32,
version: NonZeroU32,
}
```
This commit also adds `Context::reserve_model` and
`Context::insert_model` to determine a model's entity ID before it is
created, which we need in order to assign a `BufferId` in the background
when loading a buffer asynchronously.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This fixes certain shortcuts/motions on X11 like in vim mode "v i )",
where previously zed would interpret it as "v i SHIFT )" due to the x11
backend emitting key press events for modifier keys even though other
platforms like Wayland don't. This also adds support for
ModifiersChanged events to X11
Release Notes:
- Fixed vim motions like "v i )" not working on X11
([#10199](https://github.com/zed-industries/zed/issues/10199)).
Release Notes:
- N/A
Picks up https://github.com/kvark/blade/pull/105,
https://github.com/kvark/blade/pull/97, and more
Switches the presentation to be non-blocking, which will improve the
latency slightly.
Allows to start playing with GLES backend, e.g.
```bash
cd crates/gpui
RUSTFLAGS="--cfg gles" CARGO_TARGET_DIR=./target-gl cargo run --example hello_world
```
It doesn't currently render properly due to an issue that needs
investigation, see
https://github.com/kvark/blade/pull/105#issuecomment-2041006542
But at least it's a start
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This fixes a bug in https://github.com/zed-industries/zed/pull/9818,
where the status was not removed if the request failed. It also adds
replication of these new status messages to guests when collaborating.
Release Notes:
- Fixed an issue where the status of failed LSP actions was left in the
status bar
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
To reference the system font, use the special ".SystemUIFont" family
name.
/cc @PixelJanitor
Release Notes:
- Switched to the system UI font for user interface elements on macOS.
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Fixed#10149
A user had Zed crash due to invalid font size in settings. It turned out
the width/height of glyphs does not pass validation in Metal texture
initialization with a large enough font size.
All modern Macs have a max texture width/height of 16kB (barring Apple
A8, used by iPhone 6 back in 2014, which uses 8kB). This commit clamps
texture size at 16kB. Note that while it fixes Zed crash, using a font
size that hits the limit is still pretty unusable - the users will still
have a pretty unusable editor, but at least it won't crash for them.
Release Notes:
- Fixed crashes with huge `buffer_font_size` values.
This puts the Linux platform implementation at a similar code style and
quality to the macOS platform. The largest change is that I collapsed
the `LinuxPlatform` -> `[Backend]` -> `[Backend]State` ->
`[Backend]StateInner` to just `[Backend]` and `[Backend]State`, and in
the process removed most of the `Rc`s and `RefCell`s.
TODO:
- [x] Make sure that this is on-par with the existing implementation
- [x] Review in detail, now that the large changes are done.
- [ ] Update the roadmap
Release Notes:
- N/A
Co-Authored-By: Kirill <kirill@zed.dev>
Release Notes:
- Fixed panic when dragging into Zed.
Optionally, include screenshots / media showcasing your addition that
can be included in the release notes.
**or**
- N/A
Co-authored-by: Kirill <kirill@zed.dev>
While working towards fixes for the image viewer, @mikayla-maki and I
discovered that we didn't have `object-fit: scale-down` implemented.
This doesn't _fully_ solve the image issues as there is some issue where
only the bounds width is updating on layout change that I haven't fully
chased down.
Co-Authored-By: @mikayla-maki
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Refs #9647
Fixes https://github.com/zed-industries/zed/issues/9792
This pull request moves the computation of scrollbar markers off the
main thread, to prevent them from grinding the editor to a halt when we
have a lot of them (e.g., when there are lots of search results on a
large file). With these changes we also avoid generating multiple quads
for adjacent markers, thus fixing an issue where we stop drawing other
primitives because we've drawn too many quads in the scrollbar.
Release Notes:
- Improved editor performance when displaying lots of search results,
diagnostics, or symbol highlights in the scrollbar
([#9792](https://github.com/zed-industries/zed/issues/9792)).
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Nathan <nathan@zed.dev>
Due to: https://github.com/zed-industries/zed/issues/9985 and an
abundance of caution, I'm reverting the image and svg rendering updates
for now until we can debug the issue. cc: @niklaswimmer
Release Notes:
- N/A
This reverts https://github.com/zed-industries/zed/pull/8327
That PR introduced a regression where completions' syntax highlighting
would be corrupted in a non-deterministic way, such that it varied from
frame to frame:
In the screenshot below, many of the field names (e.g. `cursor`,
`depth`) are incorrectly colored as types instead of fields. The
`finished_states` field has highlighting that changes at the wrong
offset. All of these values changed from frame to frame, creating a
strange flickering effect:
<img width="599" alt="Screenshot 2024-04-01 at 5 56 36 PM"
src="https://github.com/zed-industries/zed/assets/326587/b6a48f02-f146-4f76-92e6-32fb417d86c0">
Release Notes:
- N/A
This fixes#9928 by invalidating the tooltip on mouse scroll.
I think _ideally_ we'd have a solution that only invalidates it if,
after mouse scroll, we're not hovering over the element. But I tried
that (by essentially duplicating the code for `MouseMoveEvent` but that
lead to some inconsistencies. I think we don't redraw when we finish
scrolling.
This now behaves exactly like tooltips in Chrome: invalidate on scroll,
move mouse again to trigger the tooltip.
It also behaves like the hover tooltips in the editor.
https://github.com/zed-industries/zed/assets/1185253/05b9170e-414c-4453-84e5-90510b943c15
Release Notes:
- N/A
Reverts zed-industries/zed#9768
That change didn't seem necessary and it made symbols that need a key
shortcut to be written (e.g. SHIFT + 2 for a quote) infinitely repeat.
Release Notes:
- N/A
This PR hoists the `profile.dev.package` settings for compiling the
`resvg` crate with optimizations up to the workspace level, since Cargo
was complaining:
```
warning: profiles for the non root package will be ignored, specify profiles at the workspace root:
package: /Users/maxdeviant/projects/zed/crates/gpui/Cargo.toml
workspace: /Users/maxdeviant/projects/zed/Cargo.toml
```
Release Notes:
- N/A
Closes#10017. While reworking the `overlay` element in #9911, I did not
realize that all overlay elements called `defer_draw` with a priority of
`1`.
/cc @as-cii
Not including release notes, since it was only present in nightly.
Release Notes:
- N/A
PR: #9931 broke image scaling, such that it ignores the object-fit
parameter and instead always scales the image to fit the bounds. This
fixes the regression.
This is a follow up to #9436 . It has a cleaner API and generalized the
image_cache to be a generic asset cache, that all GPUI elements can make
use off. The changes have been discussed with @mikayla-maki on Discord.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
@SomeoneToIgnore This code should 100% work for future Zed users, but
for current Zed users, Zed's internal list of recents may not be synced
w/ macOS' Recent Documents at first. If needed this can be fixed by
calling `cx.refresh_recent_documents` on startup, but that feels a bit
unnecessary.
Release Notes:
- Fixes behavior of Recent Documents list on macOS
This PR extracts the `SemanticVersion` out of `util` and into its own
`SemanticVersion` crate.
This allows for making use of `SemanticVersion` without needing to pull
in some of the heavier dependencies included in the `util` crate.
As part of this the public API for `SemanticVersion` has been tidied up
a bit.
Release Notes:
- N/A
There was a problem using deferred draws with `overlay` and tooltips at
the same time.
The `overlay` element was removed and was split up into two separate
elements
- `deferred`
- `anchored` - Mimics the `overlay` behavior but does not render its
children as deferred
`tooltip_container` does not defer its drawing anymore and only uses
`anchored`.
/cc @as-cii
Release Notes:
- Fixed tooltip for the recent projects popover not showing anymore
---------
Co-authored-by: Antonio <antonio@zed.dev>
This adds a new action to the editor: `editor: toggle git blame`. When
used it turns on a sidebar containing `git blame` information for the
currently open buffer.
The git blame information is updated when the buffer changes. It handles
additions, deletions, modifications, changes to the underlying git data
(new commits, changed commits, ...), file saves. It also handles folding
and wrapping lines correctly.
When the user hovers over a commit, a tooltip displays information for
the commit that introduced the line. If the repository has a remote with
the name `origin` configured, then clicking on a blame entry opens the
permalink to the commit on the code host.
Users can right-click on a blame entry to get a context menu which
allows them to copy the SHA of the commit.
The feature also works on shared projects, e.g. when collaborating a
peer can request `git blame` data.
As of this PR, Zed now comes bundled with a `git` binary so that users
don't have to have `git` installed locally to use this feature.
### Screenshots
### TODOs
- [x] Bundling `git` binary
### Release Notes
Release Notes:
- Added `editor: toggle git blame` command that toggles a sidebar with
git blame information for the current buffer.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
Co-authored-by: Mikayla <mikayla@zed.dev>
Updated version of #9741 with fixes for the problems raised in #9774. I
only verified that the images no longer look blueish on Linux, because I
don't have a Mac.
cc @osiewicz
Release Notes:
- N/A
---------
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
Sharing a project displays a notification (window) on every screen.
Previously there was an issue with the positioning of windows on all
screens except the primary screen.
As you can see here:
Now:
@mikayla-maki and I also decided to refactor the `WindowOptions` a bit.
Previously you could specify bounds which controlled the positioning and
size of the window in the global coordinate space, while also providing
a display id (which screen to show the window on). This can lead to
unusual behavior because you could theoretically specify a global bound
which does not even belong to the display id which was provided.
Therefore we changed the api to this:
```rust
struct WindowOptions {
/// The bounds of the window in screen coordinates
/// None -> inherit, Some(bounds) -> set bounds.
pub bounds: Option<Bounds<DevicePixels>>,
/// The display to create the window on, if this is None,
/// the window will be created on the main display
pub display_id: Option<DisplayId>,
}
```
This lets you specify a display id, which maps to the screen where the
window should be created and bounds relative to the upper left of the
screen.
Release Notes:
- Fixed positioning of popup windows (e.g. when sharing a project) when
using multiple external displays.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
~~This is still a work in progress, but to show the public where I am
working on it~~ Ready for review
TODO:
- [x] Justify fullscreen size to display
- [x] Record and apply restored size
Release Notes:
- N/A
This pull request introduces a new `InlineCompletionProvider` trait,
which enables making `Editor` copilot-agnostic and lets us push all the
copilot functionality into the `copilot_ui` module. Long-term, I would
like to merge `copilot` and `copilot_ui`, but right now `project`
depends on `copilot`, which makes this impossible.
The reason for adding this new trait is so that we can experiment with
other inline completion providers and swap them at runtime using config
settings.
Please, note also that we renamed some of the existing copilot actions
to be more agnostic (see release notes below). We still kept the old
actions bound for backwards-compatibility, but we should probably remove
them at some later version.
Also, as a drive-by, we added new methods to the `Global` trait that let
you read or mutate a global directly, e.g.:
```rs
MyGlobal::update(cx, |global, cx| {
});
```
Release Notes:
- Renamed the `copilot::Suggest` action to
`editor::ShowInlineCompletion`
- Renamed the `copilot::NextSuggestion` action to
`editor::NextInlineCompletion`
- Renamed the `copilot::PreviousSuggestion` action to
`editor::PreviousInlineCompletion`
- Renamed the `editor::AcceptPartialCopilotSuggestion` action to
`editor::AcceptPartialInlineCompletion`
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Kyle <kylek@zed.dev>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
Quick fix that fixes key repeat not working when releasing a different
key than the current one being held
Don't really know much rust yet, so unsure this is the best way to
handle this, but this does seem like a good starting point to get at
least a tad familiar with it
Release Notes:
- N/A
Separate from #9451
On Windows, a new window may already active immediate after creation.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
mouse scroll wasn't working unless the window was maximized or in the
top left corner because the Windows wheel events give screen coordinates
Release Notes:
- N/A
