Closes#22659
More context can be found in attached issue.
This is specific to Windows:
1. Add parent directory watching for fs watch when the file doesn't
exist. For example, when Zed is first launched and `settings.json` isn't
there.
2. Add proper symlink handling for fs watch. For example, when
`settings.json` is a symlink.
This is exactly same as how we handle it on Linux.
Release Notes:
- Fixed an issue where items on the Welcome page could not be toggled on
Windows, either on first launch or when `settings.json` is a symlink.
Closes#22399
Currently, the target file is being trashed when trashing a symlink, and
the symlink remains intact. Symlinks are not handled separately yet, so
when `open` is used on a symlink, it gets resolved to the target file.
To fix this, we can get the file descriptor of the symlink by passing
`libc::O_PATH | libc::O_NOFOLLOW` flags to `open`, and then pass this
file descriptor to the existing `trash::trash_file` from `ashpd`.
However, this would result in an error because `ashpd` currently does
not support trashing symlink files. I have created an issue for it here:
[https://github.com/bilelmoussaoui/ashpd/issues/255](https://github.com/bilelmoussaoui/ashpd/issues/255).
For the time being, this PR partially fixes the issue by removing the
symlink without trashing so that the target file won't be affected. Once
the upstream bug is fixed, we can switch this remove action back to
trashing.
Release Notes:
- Fixed target file from being trashed when trashing symlink on Linux.
Closes#22607
Symlinks can be absolute or relative. When using
[stow](https://www.gnu.org/software/stow/) to manage dotfiles, it
creates relative symlinks to the target files.
For example:
- Original file: `/home/tims/dotfiles/zed/setting.json`
- Symlink path: `/home/tims/.config/zed/setting.json`
- Target path (relative to symlink): `../../dotfiles/zed/setting.json`
The issue is that you can’t watch the symlink path because it’s relative
and doesn't include the base path it is relative to. This PR fixes that
by converting relative symlink paths to absolute paths.
- Absolute path (after parent join):
`/home/tims/.config/zed/../../dotfiles/zed/setting.json` (This works)
- Canonicalized path (from absolute path):
`/home/tims/dotfiles/zed/setting.json` (This works too, just more
cleaner)
Release Notes:
- Fix issue where items on the Welcome page could not be toggled on
Linux when using Stow to manage dotfiles
Closes#13585
Currently, saving files with `root` ownership or `root` as the group
throws a `Permission denied (os error 13). Please try again.` error.
This PR fixes the issue on Linux by prompting the user for a password
and saving the file with elevated privileges.
It uses `pkexec` (Polkit), which is by default available on GNOME, KDE,
and most Linux systems. I haven't implemented this for macOS as I don't
have a device to test it on.
This implementation is similar to how Vscode handles it. Except, they
don't show custom message.
**Working**:
When file saving fails due to a `PermissionDenied` error, we create a
temporary file in the same directory as the target file and writes the
data to this temporary file. After, the contents of this file are copied
to the original file using the `tee` command instead of `cp` or `mv`.
This ensures that the ownership and permissions of the original file are
preserved. This command is executed using `pkexec` which will prompt
user for their password.
**Custom Message**:
The message displayed to the user in the prompt is automatically
retrieved from the `org.zed.app.policy` file, which is located at
`/usr/share/polkit-1/actions/`. This file should be installed during the
setup process. While the policy file is optional, omitting it will cause
the user to see the underlying command being executed rather than a
user-friendly message. Currently, VSCode does not display the
user-friendly message.
The policy file must specify a unique binary, ensuring that only that
binary can use the policy file. It cannot be as generic as a
`/bin/bash`, as any software using bash to prompt will end up showing
Zed’s custom message. To address this, we will create a custom bash
script, as simple as the following, placed in `/usr/bin/zed/elevate.sh`.
The script should have root ownership and should not reside in the home
directory, since the policy file cannot resolve `$HOME`.
```sh
#!/bin/bash
eval "$@"
```
*IMPORTANT NOTE*
Since copying the policy file and our script requires sudo privileges,
the installation script will now prompt for the password at very end.
Only on Linux, if `pexec` is installed.
Screenshots:
KDE with policy file:
Gnome with policy file:
Gnome without policy file:
VSCode:
User declines the permission request:
Release Notes:
- Fixed file saving with root ownership on Linux.
Closes #ISSUE
## background
If a project is big, some times it will be splited into many small git
repos.
[google repo](https://gerrit.googlesource.com/git-repo/) is a tool to
manage a group of git repos.
But, any small git repo manged by this tool, have a difference with
normal git repo.
That is , the path `.git` in the root of the git repo, is not a normal
directory, but a soft link to real git bare dir.
### zed can not recognize the `git-repo` managed git repos
you can use the procedure to genreate this problem
```bash
# tested on linux
mkdir -p bad_git_repo_project
cd bad_git_repo_project
git init
echo "hello" > hi.txt
git add .
git commit -m "init commit"
echo "hello world" >> hi.txt
# modify the repo
mv .git ../.real_git_repo
ln -sf ../.real_git_repo .git
```
with vscode, after opening this project, git works well.
but for Zed, git not work(not git status, no git blame)
## how to fix
libgit2 can recognize git repo from the root of the project(dir that
have `.git`).
so, we can recognize the git project by opening from the project root
dir, but not the `.git` dir
This fix also works with normal git project.
### before fix
### after fix
Release Notes:
- Fix opening repos when .git is a soft link
The Linux watcher was unconditionally watching the parent directory of
every watched path. This is needed in the case of config files that may
not exist when the watch is set up, but not in other cases. Scoping the
parent watch more narrowly cuts down on the amount of error logging from
irrelevant file change notifications being sent to Zed (in my case it
was picking up changes to a random file in `$HOME`).
Release Notes:
- N/A
This is a pure refactor of our Git diff state management. Buffers are no
longer are associated with one single diff (the unstaged changes).
Instead, there is an explicit project API for retrieving a buffer's
unstaged changes, and the `Editor` view layer is responsible for
choosing what diff to associate with a buffer.
The reason for this change is that we'll soon want to add multiple "git
diff views" to Zed, one of which will show the *uncommitted* changes for
a buffer. But that view will need to co-exist with other views of the
same buffer, which may want to show the unstaged changes.
### Todo
* [x] Get git gutter and git hunks working with new structure
* [x] Update editor tests to use new APIs
* [x] Update buffer tests
* [x] Restructure remoting/collab protocol
* [x] Update assertions about staged text in
`random_project_collaboration_tests`
* [x] Move buffer tests for git diff management to a new spot, using the
new APIs
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Closes#19866
This PR supersedes #19228, as #19228 encountered too many merge
conflicts.
After some exploration, I found that for paths with the `\\?\` prefix,
we can safely remove it and consistently use the clean paths in all
cases. Previously, in #19228, I thought we would still need the `\\?\`
prefix for IO operations to handle long paths better. However, this
turns out to be unnecessary because Rust automatically manages this for
us when calling IO-related APIs. For details, refer to Rust's internal
function
[`get_long_path`](017ae1b21f/library/std/src/sys/path/windows.rs (L225-L233)).
Therefore, we can always store and use paths without the `\\?\` prefix.
This PR introduces a `SanitizedPath` structure, which represents a path
stripped of the `\\?\` prefix. To prevent untrimmed paths from being
mistakenly passed into `Worktree`, the type of `Worktree`’s `abs_path`
member variable has been changed to `SanitizedPath`.
Additionally, this PR reverts the changes of #15856 and #18726. After
testing, it appears that the issues those PRs addressed can be resolved
by this PR.
### Existing Issue
To keep the scope of modifications manageable, `Worktree::abs_path` has
retained its current signature as `fn abs_path(&self) -> Arc<Path>`,
rather than returning a `SanitizedPath`. Updating the method to return
`SanitizedPath`—which may better resolve path inconsistencies—would
likely introduce extensive changes similar to those in #19228.
Currently, the limitation is as follows:
```rust
let abs_path: &Arc<Path> = snapshot.abs_path();
let some_non_trimmed_path = Path::new("\\\\?\\C:\\Users\\user\\Desktop\\project");
// The caller performs some actions here:
some_non_trimmed_path.strip_prefix(abs_path); // This fails
some_non_trimmed_path.starts_with(abs_path); // This fails too
```
The final two lines will fail because `snapshot.abs_path()` returns a
clean path without the `\\?\` prefix. I have identified two relevant
instances that may face this issue:
-
[lsp_store.rs#L3578](0173479d18/crates/project/src/lsp_store.rs (L3578))
-
[worktree.rs#L4338](0173479d18/crates/worktree/src/worktree.rs (L4338))
Switching `Worktree::abs_path` to return `SanitizedPath` would resolve
these issues but would also lead to many code changes.
Any suggestions or feedback on this approach are very welcome.
cc @SomeoneToIgnore
Release Notes:
- N/A
See ["mtime comparison considered
harmful"](https://apenwarr.ca/log/20181113) for details of why
comparators other than equality/inequality should not be used with
mtime.
Release Notes:
- N/A
This adds support for [git
worktrees](https://matklad.github.io/2024/07/25/git-worktrees.html). It
fixes the errors that show up (git blame not working) and actually adds
support for detecting git changes in a `.git` folder that's outside of
our path (and not even in the ancestor chain of our root path).
(While working on this we discovered that our `.gitignore` handling is
not 100% correct. For example: we do stop processing `.gitignore` files
once we found a `.git` repository and don't go further up the ancestors,
which is correct, but then we also don't take into account the
`excludesFile` that a user might have configured, see:
https://git-scm.com/docs/gitignore)
Closes https://github.com/zed-industries/zed/issues/19842
Closes https://github.com/zed-industries/zed/issues/4670
Release Notes:
- Added support for git worktrees. Zed can now open git worktrees and
the git status in them is correctly handled.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Bennet <bennet@zed.dev>
Closes#17605
Watches for target paths if file watched is a symlink in Linux.
This will check if the generated `notify::Event` has any paths matching
the `root_path` and if the file is a symlink it will also check if the
path matches the `target_root_path` (the path that the symlink is
pointing to)
Release Notes:
- Added file watching for symlinks
Add `/auto` behind a feature flag that's disabled for now, even for
staff.
We've decided on a different design for context inference, but there are
parts of /auto that will be useful for that, so we want them in the code
base even if they're unused for now.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR reverts #17173, as it introduced a segfault when opening any
Gleam project and the language server starts up.
This reverts commit a850731b0e.
Release Notes:
- N/A
Context: https://x.com/fasterthanlime/status/1819120238228570598
Up to this PR:
- We were not watching paths outside of a worktree when language server
requested it.
- We expected GlobPattern used for file watching to be always rooted at
the worktree root.
'1 mattered for observing global files (e.g. global RA config) and both
points had impact on "monorepos".
Let's picture the following scenario:
You're working on a Rust project that has two crates: bin and lib crate:
```
my-rust-project/
bin-crate/
lib-crate/
```
Up to this PR, making changes like changing field visibility in
lib-crate **was not reflected** in bin-crate until RA was restarted. RA
for bin-crate asked us to watch lib-crate. Now, depending on if you had
this project open as:
- a project with one worktree rooted at my-rust-project:
- due to '2, we never noticed that we have to notify RA instance for
bin-crate about changes in lib-crate.
- a project with two worktrees (bin-crate and lib-crate):
- due to '1 (as lib-crate is not within bin-crate's worktree), we once
again missed the fact that we have to watch for changes in lib-crate.
This PR solves this by introducing a side-channel - we just store fs
watchers for abs paths at the Project level. Worktree changes handling
is left relatively untouched - as it's used for other changes besides
LSP change notifying, I've figured to better leave it as is, as right
now we have 1 worktree change watcher; if we were to change it, we'd
have `(language server) + 1` watchers per worktree, which seems.. pretty
horrid.
What's the end effect? At the very least fasterthanlime should be a tad
happier; in reality though, I expect it to have some impact on LS
reliability in monorepo setups.
TODO
- [x] Wire through FileChangeType into `fs::watch` interface.
Release Notes:
- Improved language server reliability in multi-worktree projects and
monorepo. We now notify the language server more reliably about which
files have changed.
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [cocoa](https://togithub.com/servo/core-foundation-rs) | dependencies
| minor | `0.25` -> `0.26` |
| [cocoa](https://togithub.com/servo/core-foundation-rs) |
workspace.dependencies | minor | `0.25` -> `0.26` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41Ni4wIiwidXBkYXRlZEluVmVyIjoiMzguNTYuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
---------
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Mikayla <mikayla@zed.dev>
Release Notes:
- Fixed the issue related to the project wide search being stuck when
project contains .fifo files
- Might potentially solve the following issue
https://github.com/zed-industries/zed/issues/7360
I have my system temp dir on a different drive than the default, so this
error was spammed in the logs. This also broke Zed in many ways, one of
which was the AI system failing to work since it couldn't save settings.
```
2024-08-20T22:39:54.0660708-07:00 [ERROR] Failed to write settings to file "\\\\?\\C:\\Users\\myuser\\AppData\\Roaming\\Zed\\settings.json"
Caused by:
0: failed to persist temporary file: The system cannot move the file to a different disk drive. (os error 17)
1: The system cannot move the file to a different disk drive. (os error 17)
```
Note: This problem is probably present on MacOS due to the requirement
of the underlying api being used. I do not have Mac, so I cannot test
this. This PR only solves this issue on Windows.
Closes#16571
Release Notes:
- fix atomic_write failing on windows if destination is on a different
drive than the OS's temp dir.
Closes#15860
Since rust std now supports LazyLock replacing lazy_static with it
reduce the external dependency.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Previously, we've only marked restored buffers as dirty. This PR changes
that behavior in case the buffer has been associated with a file and
that file has changed on disk since the last time Zed stored its
contents.
Example timeline:
1. User edits file in Zed, buffer is dirty
2. User quites Zed with `cmd-q`
3. User changes file on disk: `echo foobar >> file.txt` or `git checkout
file.txt`
4. User starts Zed
5. File/buffer are now marked as having a conflict (yellow icon)
Release Notes:
- Unsaved files that are restored when Zed starts are now marked as
having a conflict if they have been changed on disk since the last time
they were stored.
Demo:
https://github.com/user-attachments/assets/6098b485-b325-49b7-b694-fd2fc60cce64
This PR adds a global `Fs` instance to the app context.
This will make it easier to access the filesystem in some cases instead
of having to thread it around.
Release Notes:
- N/A
This is a first step towards allowing you to edit remote projects
directly over SSH. We'll start with a pretty bare-bones feature set, and
incrementally add further features.
### Todo
Distribution
* [x] Build nightly releases of `zed-remote-server` binaries
* [x] linux (arm + x86)
* [x] mac (arm + x86)
* [x] Build stable + preview releases of `zed-remote-server`
* [x] download and cache remote server binaries as needed when opening
ssh project
* [x] ensure server has the latest version of the binary
Auth
* [x] allow specifying password at the command line
* [x] auth via ssh keys
* [x] UI password prompt
Features
* [x] upload remote server binary to server automatically
* [x] opening directories
* [x] tracking file system updates
* [x] opening, editing, saving buffers
* [ ] file operations (rename, delete, create)
* [ ] git diffs
* [ ] project search
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
TODO:
- [ ] File a PR with Yarn to add Zed to the list of supported IDEs.
Fixes: https://github.com/zed-industries/zed/issues/10107
Fixes: https://github.com/zed-industries/zed/issues/13706
Release Notes:
- Improved experience in projects using Yarn. Run `yarn dlx
@yarnpkg/sdks base` in the root of your project in order to elevate your
experience.
---------
Co-authored-by: Saurabh <79586784+m4saurabh@users.noreply.github.com>
This PR replaces the `lazy_static!` usages in the `paths` crate with
`OnceLock` from the standard library.
This allows us to drop the `lazy_static` dependency from this crate.
The paths are now exposed as accessor functions that reference a private
static value.
Release Notes:
- N/A
This PR extracts the definition of the various Zed paths out of `util`
and into a new `paths` crate.
`util` is for generic utils, while these paths are Zed-specific. For
instance, `gpui` depends on `util`, and it shouldn't have knowledge of
these paths, since they are only used by Zed.
Release Notes:
- N/A
This fixes `project_tests::rescan_and_remote_updates` .
That test was actually correctly failing, revealing two bugs on Linux.
Release Notes:
- Fixed an issue where file renames were not detected on Linux.
- Fixed performance problems caused by excessive file system events on
Linux.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Previously, each git `Repository` object was held inside of a mutex.
This was needed because libgit2's Repository object is (as one would
expect) not thread safe. But now, the two longest-running git operations
that Zed performs, (`status` and `blame`) do not use libgit2 - they
invoke the `git` executable. For these operations, it's not necessary to
hold a lock on the repository.
In this PR, I've moved our mutex usage so that it only wraps the libgit2
calls, not our `git` subprocess spawns. The main user-facing impact of
this is that the UI is much more responsive when initially opening a
project with a very large git repository (e.g. `chromium`, `webkit`,
`linux`).
Release Notes:
- Improved Zed's responsiveness when initially opening a project
containing a very large git repository.
- Added support for xdg trash when deleting files on linux
- moved ashpd depency to toplevel to use it in both fs and gpui
If I need to add test, or change anything, please let me know. I tested
locally by creating and deleting a file and confirming it showed up in
my trashcan, but that probably a less than ideal method of confirming
correct behavior
Also, I could remove the delete directory function for linux, and change
the one configured for macos to compile for both macos and linux (they
are the same, the version of the function they are calling is
different).
Release Notes:
- N/A
- [x] Build out cli on linux
- [x] Add support for --dev-server-token sent by the CLI
- [x] Package cli into the .tar.gz
- [x] Link the cli to ~/.local/bin in install.sh
Release Notes:
- linux: Add cli support for managing zed
This PR adds a registry for `GitHostingProvider`s.
The intent here is to help decouple these provider-specific concerns
from the lower-level `git` crate.
Similar to languages, the Git hosting providers live in the new
`git_hosting_providers` crate.
This work also lays the foundation for if we wanted to allow defining a
`GitHostingProvider` from within an extension. This could be useful if
we wanted to extend the support to work with self-hosted Git providers
(like GitHub Enterprise).
I also took the opportunity to move some of the provider-specific code
out of the `util` crate, since it had leaked into there.
Release Notes:
- N/A
TODO:
- [x] Don't immediately seg fault
- [x] Implement for directories
- [x] Add cmd-delete to remove files
- [ ] ~~Add setting for trash vs. delete~~ You can just use keybindings
to change the behavior.
fixes https://github.com/zed-industries/zed/issues/7228
fixes https://github.com/zed-industries/zed/issues/5094
Release Notes:
- Added a new `project_panel::Trash` action and changed the default
behavior for `backspace` and `delete` in the project panel to send a
file to the systems trash, instead of permanently deleting it
([#7228](https://github.com/zed-industries/zed/issues/7228),
[#5094](https://github.com/zed-industries/zed/issues/5094)). The
original behavior can be restored by adding the following section to
your keybindings:
```json5
[
// ...Other keybindings...
{
"context": "ProjectPanel",
"bindings": {
"backspace": "project_panel::Delete",
"delete": "project_panel::Delete",
}
}
]
For a long time, we've had problems where diagnostics can end up showing
up inconsistently in different views. This PR is my attempt to prevent
that, and to simplify the system in the process. There are some UX
changes.
Diagnostic behaviors that have *not* changed:
* In-buffer diagnostics update immediately when LSPs send diagnostics
updates.
* The diagnostic counts in the status bar indicator also update
immediately.
Diagnostic behaviors that this PR changes:
* [x] The tab title for the project diagnostics view now simply shows
the same counts as the status bar indicator - the project's current
totals. Previously, this tab title showed something slightly different -
the numbers of diagnostics *currently shown* in the diagnostics view's
excerpts. But it was pretty confusing that you could sometimes see two
different diagnostic counts.
* [x] The project diagnostics view **never** updates its excerpts while
the user might be in the middle of typing it that view, unless the user
expressed an intent for the excerpts to update (by e.g. saving the
buffer). This was the behavior we originally implemented, but has
changed a few times since then, in attempts to fix other issues. I've
restored that invariant.
Times when the excerpts will update:
* diagnostics are updated while the diagnostics view is not focused
* the user changes focus away from the diagnostics view
* the language server sends a `work done progress end` message for its
disk-based diagnostics token (i.e. cargo check finishes)
* the user saves a buffer associated with a language server, and then a
debounce timer expires
* [x] The project diagnostics view indicates when its diagnostics are
stale. States:
* when diagnostics have been updated while the diagnostics view was
focused:
* the indicator shows a 'refresh' icon
* clicking the indicator updates the excerpts
* when diagnostics have been updated, but a file has been saved, so that
the diagnostics will soon update, the indicator is disabled
With these UX changes, the only 'complex' part of the our diagnostics
presentation is the Project Diagnostics view's excerpt management,
because it needs to implement the deferred updates in order to avoid
disrupting the user while they may be typing. I want to take some steps
to reduce the potential for bugs in this view.
* [x] Reduce the amount of state that the view uses, and simplify its
implementation
* [x] Add a randomized test that checks the invariant that a mutated
diagnostics view matches a freshly computed diagnostics view
## Release Notes
- Reworked the project diagnostics view:
- Fixed an issue where the project diagnostics view could update its
excerpts while you were typing in it.
- Fixed bugs where the project diagnostics view could show the wrong
excerpts.
- Changed the diagnostics view to always update its excerpts eagerly
when not focused.
- Added an indicator to the project diagnostics view's toolbar, showing
when diagnostics have been changed.
---------
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
Closes https://github.com/zed-industries/zed/issues/4730
To the left is a symlink, to the right — the real file.
The issue was due to the fact, that symlinks files contain the file path
to the real file, and git (properly) treats that symlink file contents
as diff base, returning in `load_index_text` (via `let content =
repo.find_blob(oid)?.content().to_owned();`) the contents of that
symlink file — the path.
The fix checks for FS metadata before fetching the git diff base, and
skips it entirely for symlinks: Zed opens the symlink file contents
instead, fully obscuring the git symlink diff hunks.
Interesting, that VSCode behaves as Zed before the fix; while the fix
makes Zed behave like Intellij* IDEs now.
Release Notes:
- Fixed git diff hunks appearing in the symlinked files
([4730](https://github.com/zed-industries/zed/issues/4730))
This adds a new action to the editor: `editor: toggle git blame`. When
used it turns on a sidebar containing `git blame` information for the
currently open buffer.
The git blame information is updated when the buffer changes. It handles
additions, deletions, modifications, changes to the underlying git data
(new commits, changed commits, ...), file saves. It also handles folding
and wrapping lines correctly.
When the user hovers over a commit, a tooltip displays information for
the commit that introduced the line. If the repository has a remote with
the name `origin` configured, then clicking on a blame entry opens the
permalink to the commit on the code host.
Users can right-click on a blame entry to get a context menu which
allows them to copy the SHA of the commit.
The feature also works on shared projects, e.g. when collaborating a
peer can request `git blame` data.
As of this PR, Zed now comes bundled with a `git` binary so that users
don't have to have `git` installed locally to use this feature.
### Screenshots
### TODOs
- [x] Bundling `git` binary
### Release Notes
Release Notes:
- Added `editor: toggle git blame` command that toggles a sidebar with
git blame information for the current buffer.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
Co-authored-by: Mikayla <mikayla@zed.dev>
Since Windows has a distinction between symlinks for directories and
symlinks for files, the implementation is adapted to this distinction.
Release Notes:
- N/A
