After the changes in #15536, block decorations need to be given an
explicit height if their content doesn't consume height on its own. We
missed that inline transformation deletion decorations didn't do this,
creating weird results. This fixes the issue and prevents block
decorations from ever having a zero height. That helps avoid major
weirdness, but this still a bit of a gotcha.
We need to back port this to Preview Channel (0.147.x)
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
This PR fixes an issue where creating a new context as a guest would
insert multiple default prompts: one for the host and one for the guest.
When creating a new context as a guest while collaborating, we should
only use the host's default prompt.
Release Notes:
- N/A
This PR fixes the `.env.toml` paths, since we inadvertently broke them
in https://github.com/zed-industries/zed/pull/15557.
There's likely a better way we can do this, but I wanted to restore the
previous behavior, for now.
Release Notes:
- N/A
This PR renames the links to the `zed.dev/settings` page to the
`zed.dev/account`.
Some of these spots will likely link out to a marketing page later.
Release Notes:
- N/A
This PR removes the primary/secondary distinction for
`CachedLspAdapter`s.
After #15624 we weren't relying on the `is_primary` field anywhere, so
we can remove it.
Release Notes:
- N/A
This adds a button to the `Configuration` page for providers so it's
easy to start a new context _with the given provider_ selected.
Obviously not the most beautiful form this button can have, but works!
cc @iamnbutler
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
This PR updates how we determine the "primary" language server for a
buffer to make it respect the order specified by the `language_servers`
setting.
Previously we were relying on the language servers to be registered in
the right order in order to select the primary one effectively.
However, in my testing I observed some cases where a native language
server (e.g., `tailwindcss-language-server`) could end up first in the
list of language servers despite not being first in the
`language_servers` setting.
While this wasn't a problem for the Tailwind or ESLint language servers
on account of them being defined natively with the designation of
"secondary" language servers, this could cause problems with
extension-based language servers.
To remedy this, every time we start up language servers we reorder the
list of language servers for a given language to reflect the order in
the `language_servers` setting. This ordering then allows us to treat
the first language server in the list as the "primary" one.
Related issues:
- https://github.com/zed-industries/zed/issues/15023
- https://github.com/zed-industries/zed/issues/15279
Release Notes:
- The ordering of language servers will now respect the order in the
`language_servers` setting.
- The first language server in this list will be used as the primary
language server.
Small bug that snuck in with #15490. When closing the configuration tab
explicitly and then activating the assistant tab again, it wouldn't show
the configuration page.
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
We were reporting file count as worktree entry count, which led to us
missing some of the entries in /file command completion.
/cc @bennetbo
The other components that used `PathMatchCandidateSet` are
`/diagnostics` and file finder. File finder is unaffected, as it used
`Candidates::Files` - thus previously reported count was correct for it;
`/diagnostics` were using `::Entries` as well, so it could miss entries
just like `/files`.
Release Notes:
- Fixed /file and /diagnostics slash commands omitting entries in it's
completions menu.
Built-in prompts can still be removed from the default prompt, but they
can't be edited and are automatically updated with new Zed releases.
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
- [x] bug: setting a key doesn't update anything
- [x] show high-level text on configuration page to explain what it is
- [x] show "everything okay!" status when credentials are set
- [x] maybe: add "verify" button to check credentials
- [x] open configuration page when opening panel for first time and
nothing is configured
- [x] BUG: need to fix empty assistant panel if provider is `zed.dev`
but not logged in
Co-Authored-By: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This commit gives tab button renderers control over the condition in
which they should be displayed. Previously we displayed tab buttons only
when the pane was focused. Now tab renderers can return an Option of
AnyElement, which in turn makes it possible for them to control when and
how they're rendered. Pane and Terminal handlers still check for self
focus condition and Assistant Panel does not.
Release Notes:
- N/A
This PR fixes Copilot chat authentication on Windows. GitHub Copilot
chat in assistant panel uses auth token file generated by [copilot
language server](https://github.com/zed-industries/copilot). The path to
authentication token file is platform dependent. On Windows, it happens
to be `~\AppData\Local\github-copilot\hosts.json`.
Release Notes:
- Fixed Copilot chat sign in issue on Windows ([#4673](https://github.com/zed-industries/zed/issues/4673))
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [image](https://togithub.com/image-rs/image) | dependencies | patch |
`0.25.1` -> `0.25.2` |
| [image](https://togithub.com/image-rs/image) | workspace.dependencies
| patch | `0.25.1` -> `0.25.2` |
---
### Release Notes
<details>
<summary>image-rs/image (image)</summary>
###
[`v0.25.2`](https://togithub.com/image-rs/image/blob/HEAD/CHANGES.md#Version-0252)
[Compare
Source](https://togithub.com/image-rs/image/compare/v0.25.1...v0.25.2)
Features:
- Added the HDR encoder to supported formats in generic write methods
with the
`hdr` feature enabled. Supports 32-bit float RGB color only, for now.
- When cloning `ImageBuffer`, `DynamicImage` and `Frame` the existing
buffer
will now be reused if possible.
- Added `image::ImageReader` as an alias.
- Implement `ImageEncoder` for `HdrEncoder`.
Structural changes
- Switch from `byteorder` to `byteorder-lite`, consolidating some
casting
unsafety to `bytemuck`.
- Many methods on `DynamicImage` and buffers gained `#[must_use]`
indications.
Bug fixes:
- Removed test data included in the crate archive.
- The WebP animation decoder stops when reaching the indicate frame
count.
- Fixed bugs in the `bmp` decoder.
- Format support gated on the `exr` feature now compiles in isolation.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [etagere](https://togithub.com/nical/etagere) | dependencies | patch |
`0.2.8` -> `0.2.13` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR increases the frequency at which we poll for Stripe events.
This decreases the amount of time we have to wait in order for changes
in Stripe to be reflected in our system.
We now poll for events every 5 seconds, down from every 5 minutes.
In order to avoid needlessly over-fetching data from Stripe, we put a
cap on the number of pages consisting entirely of already-processed
events that we can see before stopping. This is set to 4, so once we've
seen 4 pages of processed events (400 events in total), we'll stop
fetching subsequent pages.
Release Notes:
- N/A
This PR ensures that the toolbar within the editor and the assistant
panel have the same height. I also pushed in some other tiny design
(spacing, really) tweaks. There's still a mismatch between the editor
toolbar and the assistant panel's history tab, but I'll try to tackle
this separately.
---
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [emojis](https://togithub.com/rossmacarthur/emojis) |
workspace.dependencies | patch | `0.6.1` -> `0.6.3` |
---
### Release Notes
<details>
<summary>rossmacarthur/emojis (emojis)</summary>
###
[`v0.6.3`](https://togithub.com/rossmacarthur/emojis/compare/0.6.2...0.6.3)
[Compare
Source](https://togithub.com/rossmacarthur/emojis/compare/0.6.2...0.6.3)
###
[`v0.6.2`](https://togithub.com/rossmacarthur/emojis/compare/0.6.1...0.6.2)
[Compare
Source](https://togithub.com/rossmacarthur/emojis/compare/0.6.1...0.6.2)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
English is hard.
In US English the forms of "cancel" are as follows:
- `cancel`
- `cancels`
- `canceling`
- `canceled`
- `cancellation`
Note that `cancellation` _does_ use the double `l`, which all the rest
of the forms do not.
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[embed-resource](https://togithub.com/nabijaczleweli/rust-embed-resource)
| build-dependencies | patch | `2.4.2` -> `2.4.3` |
---
### Release Notes
<details>
<summary>nabijaczleweli/rust-embed-resource (embed-resource)</summary>
###
[`v2.4.3`](https://togithub.com/nabijaczleweli/rust-embed-resource/compare/v2.4.2...v2.4.3)
[Compare
Source](https://togithub.com/nabijaczleweli/rust-embed-resource/compare/v2.4.2...v2.4.3)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [core-graphics](https://togithub.com/servo/core-foundation-rs) |
dependencies | patch | `0.23.1` -> `0.23.2` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR updates collab to pick the `zed.dev` URL based on the current
environment rather than always using `https://zed.dev`.
This means that when developing locally we'll use
`http://localhost:3000` to be taken to the locally-running version of
`zed.dev`.
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [async-task](https://togithub.com/smol-rs/async-task) | dependencies |
patch | `4.7.0` -> `4.7.1` |
---
### Release Notes
<details>
<summary>smol-rs/async-task (async-task)</summary>
###
[`v4.7.1`](https://togithub.com/smol-rs/async-task/blob/HEAD/CHANGELOG.md#Version-471)
[Compare
Source](https://togithub.com/smol-rs/async-task/compare/v4.7.0...v4.7.1)
- Improve the panic message for when a task is polled after completion.
([#​73](https://togithub.com/smol-rs/async-task/issues/73))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This UI change is behind a `ZedPro` feature flag so that it won't be
visible until we're ready to launch that service.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Marshall <marshall@zed.dev>
This PR updates the rate limits to adapt based on the user's current
plan.
For the free plan rate limits I just took one-tenth of the existing rate
limits (which are now the Pro limits). We can adjust, as needed.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
This PR renames and added a new pane event to indicate the difference
between `removing` and `removed` event. This change is needed for the
debugger implementation, if you close a pane we have to send a
`terminateThread` request to the adapter because it's not supported to
reopen a pane. So when the pane is removing we have to know what thread
it is what is stored on the panel itself, so we have to be able to get
this information before the pane is actually removed.
So my idea how to fix this was by adding a new event called
`RemovedItem` which is a rename of `RemoveItem` which also makes a bit
more sense because the item is removed at that point. And seeing the
name `RemoveItem` does not really say that it's removed, more like we
are removing the item.
/cc @mikayla-maki
Release Notes:
- N/A
