This PR changes GPUI to open windows with a default size and location,
and to otherwise inherit from their spawning window.
Note: The linux build now crashes on startup.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Ezekiel Warren <zaucy@users.noreply.github.com>
FindAllReferences LSP requests might take a long time to complete, and
currently Zed allows multiple requests spawned concurrently for the same
Anchor in the multi buffer. That results in multiple search results'
multi buffers appearing, sometimes at once, which is not what we want.
Part of https://github.com/zed-industries/zed/issues/5351 that helps to
reduce the amount of search results after clicks that did not resolve
instantly.
Release Notes:
- Improved FindAllReferences action by not allowing concurrent requests
for the same multi buffer source
Closes https://github.com/zed-industries/zed/issues/5275
Double click with `alt` modifier pressed will do the regular word
selection.
Adds a setting to disable this behavior and instead select a word, as in
the regular buffer.
```
// What to do when multibuffer is double clicked in some of its excerpts
// (parts of singleton buffers).
// May take 2 values:
// 1. Behave as a regular buffer and select the whole word.
// "double_click_in_multibuffer": "select"
// 2. Open the excerpt clicked as a new buffer in the new tab (default).
// "double_click_in_multibuffer": "open",
// For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
"double_click_in_multibuffer": "open",
```
Release Notes:
- Made multibuffer to open excerpts in new tabs on double click by
default (changing settings or keeping alt restores the word selection
behavior). ([5275](https://github.com/zed-industries/zed/issues/5275))
This fixes https://github.com/zed-industries/zed/issues/9069 by
1. reverting https://github.com/zed-industries/zed/issues/7819
2. fixing completion filtering with regards to word boudaries
For (2) see explanation in commit message:
> Previously, this would only split words on upper-lower boundaries or
> on `_`/`-`.
>
> The result was that we would filter out completions too aggressively.
> The filter works by taking a suggested completion, say `foo_bar_lol`,
split
> it up into words - `foo`, `bar, `lol` - and check whether any of the
words
> start with the same characters as what the user already typed: `fo`,
or `bar`,
> ...
>
> In the case of Ruby, though, `:` wasn't considered a word boundary. If
the
> LSP would return `:foobar` when the user typed `:foo`, we'd check if
there are
> any completions that match `foo` (because that's the current word) but
> we'd compare against `foobar`, not `:` or `:foobar`.
>
> With this change, we get more match candidates and thus more
completions in Ruby.
With that we can do (1) because we don't need these characters as word
characters anymore to trigger completions.
Release Notes:
- Fixed word boundaries in Ruby by restoring old behavior (`@`, `:`, ...
are no longer considered word characters)
([#9069](https://github.com/zed-industries/zed/issues/9069))
- Fixed completions being filtered out when they happened at word
boundaries on special characters (e.g. `:`)
---------
Co-authored-by: Max <max@zed.dev>
This is just a refactor. I noticed that we now have a `project_core`
crate, which mainly contains the `Worktree` type and its private
helpers, plus the project's settings.
In this PR, I've renamed that crate to `worktree` and did some minor
simplification to its module structure. I also extracted a new
`WorktreeSettings` settings type from the `ProjectSettings`, so that the
worktree settings could live in the worktree crate. This way, the crate
is now exclusively about worktree logic.
Release Notes:
- N/A
We were seeing weird layouts with large files, where - starting with
some verylargelineindex - lines were rendered at weird y offsets. It
turned out that in some cases we're doing operations on Pixel values of
different magnitude, which then led to wrong results in calculations.
This commit addresses some of these problems, visible at glance when
working with large plaintext files. I *did not* dig into things like
inlay hints or diagnostics to see if they are subject to the same
potential precision loss.
Fixes#5371
Release Notes:
- Fixed editor layout for large files, where the lines might have been
laid out with incorrect Y offset from the top.
Right now we're basing the width of the menu on the longest code action
title. That is only an approximation and doesn't always coincide
perfectly with the true, longest code action.
Given that it's pretty close, however, this commit simply disables text
wrapping on the code action menu.
Release Notes:
- Fixed a rendering glitch that could cause code actions to not display
correctly ([#8341](https://github.com/zed-industries/zed/issues/8341))
See https://zed.dev/channel/gpui-536
Fixes https://github.com/zed-industries/zed/issues/9010
Fixes https://github.com/zed-industries/zed/issues/8883
Fixes https://github.com/zed-industries/zed/issues/8640
Fixes https://github.com/zed-industries/zed/issues/8598
Fixes https://github.com/zed-industries/zed/issues/8579
Fixes https://github.com/zed-industries/zed/issues/8363
Fixes https://github.com/zed-industries/zed/issues/8207
### Problem
After transitioning Zed to GPUI 2, we started noticing that interacting
with the mouse on many UI elements would lead to a pretty annoying
flicker. The main issue with the old approach was that hover state was
calculated based on the previous frame. That is, when computing whether
a given element was hovered in the current frame, we would use
information about the same element in the previous frame.
However, inspecting the previous frame tells us very little about what
should be hovered in the current frame, as elements in the current frame
may have changed significantly.
### Solution
This pull request's main contribution is the introduction of a new
`after_layout` phase when redrawing the window. The key idea is that
we'll give every element a chance to register a hitbox (see
`ElementContext::insert_hitbox`) before painting anything. Then, during
the `paint` phase, elements can determine whether they're the topmost
and draw their hover state accordingly.
We are also removing the ability to give an arbitrary z-index to
elements. Instead, we will follow the much simpler painter's algorithm.
That is, an element that gets painted after will be drawn on top of an
element that got painted earlier. Elements can still escape their
current "stacking context" by using the new `ElementContext::defer_draw`
method (see `Overlay` for an example). Elements drawn using this method
will still be logically considered as being children of their original
parent (for keybinding, focus and cache invalidation purposes) but their
layout and paint passes will be deferred until the currently-drawn
element is done.
With these changes we also reworked geometry batching within the
`Scene`. The new approach uses an AABB tree to determine geometry
occlusion, which allows the GPU to render non-overlapping geometry in
parallel.
### Performance
Performance is slightly better than on `main` even though this new
approach is more correct and we're maintaining an extra data structure
(the AABB tree).
Release Notes:
- Fixed a bug that was causing popovers to flicker.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Thorsten <thorsten@zed.dev>
Prepare for git diff hunk highlights by grouping all inlay highlight
properties into one struct, and removing the dead background highlight
code.
Release Notes:
- N/A
We were seeing panics due to callers assuming they had valid
excerpt_ids, but that cannot easily be guaranteed across await points as
anyone may remove an excerpt.
Release Notes:
- Fixed a panic when hovering in a multibuffer
Release Notes:
- Changed default keybindings in the VS Code keymap so that
`alt-[up|down]` now move lines up/down and`alt-shift-[up|down]`
duplicate lines up/down. Previous bindings for selecting larger/smaller
syntax nodes are now bound to `ctrl-shift-[left|right]`.
([#4652](https://github.com/zed-industries/zed/issues/4652))([#7151](https://github.com/zed-industries/zed/issues/7151))
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This PR moves the Clippy configuration up to the workspace level.
We're using the [`lints`
table](https://doc.rust-lang.org/cargo/reference/workspaces.html#the-lints-table)
to configure the Clippy ruleset in the workspace's `Cargo.toml`.
Each crate in the workspace now has the following in their own
`Cargo.toml` to inherit the lints from the workspace:
```toml
[lints]
workspace = true
```
This allows for configuring rust-analyzer to show Clippy lints in the
editor by using the following configuration in your Zed `settings.json`:
```json
{
"lsp": {
"rust-analyzer": {
"initialization_options": {
"check": {
"command": "clippy"
}
}
}
}
```
Release Notes:
- N/A
Previously this code would call `project.visible_worktrees(cx).next`
which might not necessarily return the worktree matching the currently
open file.
What this change does is it adds `get_repo` method on `Project` that
allows us to get the `GitRepository` for the current buffer.
Release Notes:
- Fixed `open permalink to line` not working when multiple folders are
added to the project.
Co-authored-by: Mikayla <mikayla@zed.dev>
Before this change they would disappear if you blurred the pane.
Release Notes:
- Fixed an issue where the followed users' cursor would disappear if you
blurred the pane.
This solves a major usability problem in Zed, that there's no way to
temporarily disable auto formatting without toggling the whole feature
off.
fixes https://github.com/zed-industries/zed/issues/5230
Release Notes:
- Added a new `workspace::SaveWithoutFormatting`, bound to `cmd-k s`, to
save a file without invoking the auto formatter.
