Closes#22720
Release Notes:
- `ExpandExcerpts` (`shift+enter` by default) now expands all excerpts
that have selected text, rather than just excerpts that contain the end
of a selection.
This will allow the diagnostic popover to be displayed even if hovering
an invisible char.
Beyond that, it solves a rare `DiagnosticPopover` corner case:
* Supports moving the selection to a diagnostic when `GoToDiagnostic` is
done while hovering, based on `group_id`
* Provides Diagnostic values with `group_id: 0` providing information on
hover about invisible characters.
So, `GoToDiagnostic` would navigate to the very first error produced by
a language server. Really not a big deal of course.
Release Notes:
- N/A
No need to find or store the primary range ahead of time as it's found
by `activate_diagnostics`.
Not entirely sure we should still even have the special case when the
popover is visible. It does support the keyboard interaction of opening
hover followed by jumping to the primary position, but that seems pretty
undiscoverable.
Support for clicking the hover to navigate to the primary diagnostic was
removed in https://github.com/zed-industries/zed/pull/3408
Release Notes:
- N/A
In #22620 `diagnostic_group` was modified to return results for
multibuffers, but was returning singleton buffer points. `hover_popover`
uses it to find the jump target for clicking the popup - which doesn't
seem to be working right now but that's a separate issue. Now that
`diagnostic_group` is returning values in multibuffers converting these
to anchors was crashing.
Also resolves a potential bug - if folding in multibuffers was supported
then "Go To Diagnostics" would not properly skip diagnostics from folded
regions.
Release Notes:
- N/A
- [x] Rewrite worktree git handling
- [x] Fix tests
- [x] Fix `test_propagate_statuses_for_repos_under_project`
- [x] Replace `WorkDirectoryEntry` with `WorkDirectory` in
`RepositoryEntry`
- [x] Add a worktree event for capturing git status changes
- [x] Confirm that the local repositories are correctly updating the new
WorkDirectory field
- [x] Implement the git statuses query as a join when pulling entries
out of worktree
- [x] Use this new join to implement the project panel and outline
panel.
- [x] Synchronize git statuses over the wire for collab and remote dev
(use the existing `worktree_repository_statuses` table, adjust as
needed)
- [x] Only send changed statuses to collab
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.com>
Co-authored-by: Nathan <nathan@zed.dev>
Clicking buffer headers and line numbers would sometimes take you to a
disorienting scroll position. This PR improves that so the destination
line is roughly at the same Y position as it appeared in the
multibuffer.
https://github.com/user-attachments/assets/3ad71537-cf26-4136-948f-c5a96df57178
**Note**: The alignment won't always be perfect because the multibuffer
and target buffer might start at a different absolute Y position
(because of open search, breadcrumbs, etc). I wanted to compensate for
that, but that requires a fundamental change that I'd prefer to make
separately.
Release Notes:
- Fix vertical alignment when jumping from multibuffers
This PR updates the scrollbar diagnostic setting to provide fine-grained
control over which indicators to show, based on severity level. This
allows the user to hide lower-severity diagnostics that can otherwise
clutter the scrollbar (for example, unused or disabled code).
The options are set such that the existing boolean setting has the same
effect: when `true` all diagnostics are shown, and when `false` no
diagnostics are shown.
Closes#22296.
Release Notes:
- Added fine-grained control of scrollbar diagnostic indicators.
Changes:
- [x] Increase expand affordance surface area
- [x] Ensure expand buttons have tooltips with keybindings
- [x] Make line numbers clickable to jump you to location (only in
multibuffers)
- [x] Hide the "Jump To File" element in not-focused excerpts
Before merging it:
- [x] Fix off-by-one header focus styles glitch
Improvements to consider for follow-up PRs:
1. Experiment with increasing the width of the clickable surface area
for line numbers
2. Don't show (or disable) the "expand excerpt" button when at the top
or bottom edge of the file
3. Once you jump to location, centralize the cursor scroll position
Release Notes:
- Improved multibuffer's "expand excerpt" affordance
- Fixed "jump to file/location" and "expand excerpt" keybinding display
- Made clicking on line numbers in multibuffers jump you to cursor
location in file
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <agus@zed.dev>
This slashes our incremental dev times (touch editor) by 0.6s
(8.1->7.6s) due to unblocking terminal_view build sooner.
Closes #ISSUE
Release Notes:
- N/A
* Remove unnecessary WindowContext and ViewContext '_ lifetimes
* Removed some cases where WindowContext has a different name than `cx`.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/19214
Closes https://github.com/zed-industries/zed/pull/22443
Adds `resolved` property into Zed completion item data, to ensure we
resolve every completion item exactly once.
There are 2 paths for singplayer Zed, and corresponding 2 analogues for
multi player code, where resolve may happen:
* completions menu display & selection, that ends up using
`resolve_completions` in `lsp_store.rs`
* applying a completion menu entry, that ends up using
`apply_additional_edits_for_completion` in `lsp_store.rs`
Now, all local counterparts check `enabled` field before resolving and
set it to true afterwards, and reuse the same `resolve_completion_local`
method for resolving the items.
A logic for re-generating docs and item labels was moved out from the
`resolve_completion_local` method into a separate method, as
`apply_additional_edits_for_completion` does not need that, but needs
the rest of the logic for resolving.
During the extraction, I've noted that multiplayer clients are not
getting the item labels, regenerated after the resolve — as the Zed
protocol-based flow is not the exact copy of the local resolving.
To improve that, `resolve_completion_remote` needs to be adjusted, but
this change is omitted to avoid bloating the PR.
Release Notes:
- Fixed autocomplete inserting multiple imports
* Now more often displayed to the right. Resizes docs width if more
space than min width is available.
* If constrained in horizontal space and so displayed above/below resize
docs height to fit.
* Makes space for scrollbar and gap.
Layout is imperfect for viewport sizes smaller than the context menu,
left TODOs in the code for handling this. Wanted to get this change out
for feedback first.
Release Notes:
- N/A
Makes a first pass over git panel UI, making it more interactive.
* every item can be selected, the selection is shown in the panel
* every item can be clicked, which changes the selection and
creates/focuses the editor with a project changes multi buffer
* the editor is scrolled so that the clicked item is in the center
* it's possible to nagivate up and down the panel, selecting
next/previous items in it, triggering the editor scroll
Known issues:
* entries are updated oddly sometimes (should become better after
DiffMap improvements land?)
* only unstaged diffs are shown currently (entry status storage should
help with this)
* no deleted files are displayed (the underlying work is done by others
now)
* added files have no diff hunks shown (DiffMap will have it?)
* performance story has not improved (again, DiffMap and status storage
should help with this)
Release Notes:
- N/A
This is quite experimental and untested in languages other than Rust.
It's written to attempt to do something sensible in many languages. Due
to its experimental nature, just releasing to staff, and so not
including it in release notes. Future release note might be "Improved
diagnostic excerpts by using syntactic info to determine the context
lines to show."
Release Notes:
- N/A
Leaving release notes as N/A because it had release notes in the past in
#21705
In #21286, documentation resolution was made more efficient by only
resolving the current completion. However, this meant that single line
documentation shown inline in the menu was missing until scrolled
to. This also meant that it would wait for navigation to resolve
completion docs, leading to lag for displaying documentation.
This change resolves this by attempting to fetch all the completions
that will be shown. It also mostly avoids re-resolving completions. It
intentionally re-resolves the current selection on navigation, as some
language servers will respond with more information later on.
Release Notes:
- N/A
We've received a complaint on Discord about bad multicursor performance.
I too run 15k cursor simultaneously. The gist of the issue was in the
lsp_ext; whenever we gather up actions to be registered on a buffer, we
need to know whether a buffer has any of the languages for which we have
LSP extensions. The problem stemed from the fact that we did a two-phase
filtering. For each selection we'd first check whether this selection
lies in a part of a file that is part of a language for which we have
LSP extensions. Then, we'd check whether we're running a language server
of interest for this buffer.
This is not optimal, because it would often do the redundant work:
1. We resolve selections for buffer that are known to not contain a
given language server.
2. We look up language server in the LspStore once per each matching
selection.
In case where the file is not related at all, we end up resolving all of
the selections which is pretty bad. This PR makes us skip buffers which
are known to not match the criteria. It also caches the result of
language server lookup for the buffers.
Closes #ISSUE
Release Notes:
- Improved performance with large quantity of cursors
This PR ensures that, for fixed-width fonts, the cursor width is the
same on blank lines as on non-blank lines, as well as at the end of a
line. It does so by using the em advance to define the cursor width
instead of the em width in these cases.
Note that this can look... bizarre on non-fixed-width fonts:
<img width="93" alt="Screenshot 2024-12-19 at 21 43 11"
src="https://github.com/user-attachments/assets/a4c9b26c-98ea-4a1d-947b-51f1acd3c2f8"
/>
However, this is arguably reasonably consistent with how (terminal) Vim
handles it:
<img width="45" alt="Screenshot 2024-12-19 at 21 46 42"
src="https://github.com/user-attachments/assets/ec3ff614-7a15-4cc3-8d14-3d15ce62f2b8"
/>
Closes#22260.
Release Notes:
- N/A
Closes #ISSUE
Still TODO to make this feature good is better command history
Release Notes:
- vim: Add support for `:g/<pattern>/<cmd>` and `:v/<pattern>/<cmd>`
If an inline completion isn't shown in a menu, we highlight text in the
editor as deleted.
But if it's shown in the menu, we didn't even show deleted text, which
makes it hard to understand what's going on.
This fixes it.
Release Notes:
- N/A
This changes #22093 by making the change only have an effect for the
supported provider: Zeta.
Made the change because the UX is still experimental and I don't want to
break existing workflows for Copilot/Supermaven users.
Even Zeta users can opt-out of it by setting
`"show_inline_completions_in_menu": false` in their settings, in case
they want the old show-inline-completion-or-show-lsp-completion behavior
back.
Release Notes:
- N/A
Possible panic here in case we can't find the excerpt in the
multibuffer.
I thought this could happen when the inline completion references an
excerpt that disappeared from the multibuffer, but looking at the code
I'm not sure anymore - we use the same multibuffer snapshot in this
whole function and the `anchor_in_excerpt` method clips the anchors.
Still, let's be safe here.
Release Notes:
- N/A
We were committing the cardinal sin of subtracting one from a column
without clipping
Closes #ISSUE
Release Notes:
- Fixed a panic in linked editing ranges
* Presence of the aside no longer affects position or size of the
context menu.
* Prefers to fit to the right, then on same side of line, then other
side of line, within the following preference order:
- Max possible size within text area.
- Max possible size within window.
- Actual size within window. This is the only case that could cause it
to jump around with less stability.
A further enhancement atop this might be to dynamically resize aside
height to fit.
Release notes are N/A as they are covered by the notes for #22102.
Closes#8523
Release Notes:
* N/A
Closes#4427
Release Notes:
- Added a horizontal scrollbar to the editor panel
- Added `axis` option to `scrollbar` in the Zed configuration, which can
forcefully disable either the horizontal or vertical scrollbar
- Added `horizontal_scroll_margin` equivalent to
`vertical_scroll_margin` in the Zed configuration
Rough Edges:
This feature seems mostly stable from my testing. I've been using a
development build for about a week with no issues. Any feedback would be
appreciated. There are a few things to note as well:
1. Scrolling to the lower right occasionally causes scrollbar clipping
on my end, but it isn't consistent and it isn't major. Some more testing
would definitely be a good idea. [FIXED]
2. Documentation may need to be modified
3. I added an `AxisPair` type to the `editor` crate to manage values
that have a horizontal and vertical variant. I'm not sure if that's the
optimal way to do it, but I didn't see a good alternative. The `Point`
type would technically work, but it may cause confusion.
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This makes inline completions show up in the completion menu even if the
user has set `"show_completion_documentation": false` in their settings,
because there is no other way to show the Zeta completion.
Follow-up to #22093
Release Notes:
- N/A
Co-authored-by: Danilo <danilo@zed.dev>
* Now decides whether the menu is above or below the target position
before rendering it. This causes its position to no longer vary
depending on the length of completions
* When the text area is height constrained (< 12) lines, now chooses the
side which has the most space. Before it would always display above if
height constrained below.
* Misc code cleanups
Release Notes:
- Improved completions menu layout to be more stable and use available
space better.
- Ensuring that the fold button is big enough to avoid clicking on the
header as a whole (and then moving to the actual file)
- Adding tooltips to the fold button
- Refining the container structure so that the tooltip for the folder
button and the header click don't overlap
- Adding keybindings to tooltips
https://github.com/user-attachments/assets/82284b59-3025-4d6d-b916-ad4d1ecdb119
Release Notes:
- N/A
Follow-up of https://github.com/zed-industries/zed/pull/22004
* Reuse center terminals for tasks, when requested
* Extend task templates with `RevealTarget`, moving it from
`TaskSpawnTarget` into the core library
* Use `reveal_target` instead of `target` to avoid misinterpretations in
the task template context
* Do not expose `SpawnInTerminal` to user interface, avoid it
implementing `Serialize` and `Deserialize`
* Remove `NewCenterTask` action, extending `task::Spawn` interface
instead
* Do not require any extra unrelated parameters during task resolution,
instead, use task overrides on the resolved tasks on the modal side
* Add keybindings for opening the task modal in the
`RevealTarget::Center` mode
Release Notes:
- N/A
