Closes#11115
**Context**:
Consider a monorepo setup like this: the root has Prettier installed,
but the individual monorepos do not. In this case, only one Prettier
instance is used, with its installation located at the root. The
monorepos also use this same instance for formatting.
However, monorepo can have its own `.prettierignore` file, which will
take precedence over the `.prettierignore` file at the root level (if
one exists) for files in that monorepo.
<img
src="https://github.com/user-attachments/assets/742f16ac-11ad-4d2f-a5a2-696e47a617b9"
alt="prettier" width="200px" />
**Implementation**:
From the context above, we should keep ignore dir decoupled from the
Prettier instance. This means that even if the project has only one
Prettier installation (and thus a single Prettier instance), there can
still be multiple `.prettierignore` in play.
This approach also allows us to respect `.prettierignore` even when the
project does not have Prettier installed locally and instead relies on
the editor’s Prettier instance.
**Tests**:
1. No Prettier in project, using editor Prettier: Ensures
`.prettierignore` is respected even without a local Prettier
installation.
2. Monorepo with root Prettier and child `.prettierignore`: Confirms
that the child project’s ignore file is correctly used.
3. Monorepo with root and child `.prettierignore` files: Verifies the
child ignore file takes precedence over the root’s.
Release Notes:
- Added `.prettierignore` support to the Prettier integration.
Still TODO:
* [x] Factor out `start_language_server` so we can call it on register
(instead of on detect language)
* [x] Only call register in singleton editors (or when
editing/go-to-definition etc. in a multibuffer?)
* [x] Refcount on register so we can unregister when no buffer remain
* [ ] (maybe) Stop language servers that are no longer needed after some
time
Release Notes:
- Fixed language servers starting when doing project search
- Fixed high CPU usage when ignoring warnings in the diagnostics view
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Cole <cole@zed.dev>
These were silently passing after the delay in updating diagnostics was
added.
Co-Authored-By: Max <max@zed.dev>
cc @someonetoignore
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Closes#21564
Notably, RA will now rename module references if you change the source
file name via our project panel.
This PR is a tad bigger than necessary as I torn out the Model<> from
didSave watchers (I tried to reuse that code for the same purpose).
Release Notes:
- Added support for language server actions being executed on file
rename.
This is a pure refactor of our Git diff state management. Buffers are no
longer are associated with one single diff (the unstaged changes).
Instead, there is an explicit project API for retrieving a buffer's
unstaged changes, and the `Editor` view layer is responsible for
choosing what diff to associate with a buffer.
The reason for this change is that we'll soon want to add multiple "git
diff views" to Zed, one of which will show the *uncommitted* changes for
a buffer. But that view will need to co-exist with other views of the
same buffer, which may want to show the unstaged changes.
### Todo
* [x] Get git gutter and git hunks working with new structure
* [x] Update editor tests to use new APIs
* [x] Update buffer tests
* [x] Restructure remoting/collab protocol
* [x] Update assertions about staged text in
`random_project_collaboration_tests`
* [x] Move buffer tests for git diff management to a new spot, using the
new APIs
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Closes https://github.com/zed-industries/zed/issues/21516
Technically, this is an LSP violation from `vtsls`, but seems that it's
not going to be fixed adequately on that side, see
https://github.com/yioneko/vtsls/issues/213 for more context.
So, we have to accommodate at least for now.
Release Notes:
- Fixed completion item labels not being updated after the resolve for
non-LSP compliant servers
Part of https://github.com/zed-industries/zed/issues/20925
This prototype is behind a feature flag and being merged to avoid
conflicts with further git-related resturctures.
To be a proper, public feature, this needs at least:
* showing deleted files
* better performance
* randomized tests
* `TODO`s in the `project_diff.rs` file fixed
The good thing is, >90% of the changes are in the `project_diff.rs` file
only, have a basic test and already work on simple cases.
Release Notes:
- N/A
---------
Co-authored-by: Thorsten Ball <thorsten@zed.dev>
Co-authored-by: Cole Miller <cole@zed.dev>
Fixes part of issue #7808
> This venv should be the one we automatically activate when opening new
terminals, if the detect_venv setting is on.
Release Notes:
- Selected Python toolchains (virtual environments) are now automatically activated in new terminals.
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Potentially fixes#21404
This is a speculative fix, as while I was trying to repro this issue
I've noticed that introducing artificial delays in ToolchainLister::list
could impact apps responsiveness. These delays were essentially there to
stimulate PET taking a while to find venvs.
Release Notes:
- Improved app responsiveness in environments with multiple Python
virtual environments
Closes https://github.com/zed-industries/zed/issues/12029
Allows to introspect project items inside items more deeply, checking
them for being dirty.
For that:
* renames `project::Item` into `project::ProjectItem`
* adds an `is_dirty(&self) -> bool` method to the renamed trait
* changes the closing logic to only care about dirty project items when
checking for save prompts conditions
* save prompts are raised only if the item is singleton without a
project path; or if the item has dirty project items that are not open
elsewhere
Release Notes:
- Fixed item closing overly triggering save dialogues
when search somethings like `clone(`, with search options `match case
sensitively` and `match whole words` in zed code base, only `clone(cx)`
hit match, `clone()` will not hit math.
Release Notes:
- Improved buffer search for queries ending with non-letter characters
Closes#19866
This PR supersedes #19228, as #19228 encountered too many merge
conflicts.
After some exploration, I found that for paths with the `\\?\` prefix,
we can safely remove it and consistently use the clean paths in all
cases. Previously, in #19228, I thought we would still need the `\\?\`
prefix for IO operations to handle long paths better. However, this
turns out to be unnecessary because Rust automatically manages this for
us when calling IO-related APIs. For details, refer to Rust's internal
function
[`get_long_path`](017ae1b21f/library/std/src/sys/path/windows.rs (L225-L233)).
Therefore, we can always store and use paths without the `\\?\` prefix.
This PR introduces a `SanitizedPath` structure, which represents a path
stripped of the `\\?\` prefix. To prevent untrimmed paths from being
mistakenly passed into `Worktree`, the type of `Worktree`’s `abs_path`
member variable has been changed to `SanitizedPath`.
Additionally, this PR reverts the changes of #15856 and #18726. After
testing, it appears that the issues those PRs addressed can be resolved
by this PR.
### Existing Issue
To keep the scope of modifications manageable, `Worktree::abs_path` has
retained its current signature as `fn abs_path(&self) -> Arc<Path>`,
rather than returning a `SanitizedPath`. Updating the method to return
`SanitizedPath`—which may better resolve path inconsistencies—would
likely introduce extensive changes similar to those in #19228.
Currently, the limitation is as follows:
```rust
let abs_path: &Arc<Path> = snapshot.abs_path();
let some_non_trimmed_path = Path::new("\\\\?\\C:\\Users\\user\\Desktop\\project");
// The caller performs some actions here:
some_non_trimmed_path.strip_prefix(abs_path); // This fails
some_non_trimmed_path.starts_with(abs_path); // This fails too
```
The final two lines will fail because `snapshot.abs_path()` returns a
clean path without the `\\?\` prefix. I have identified two relevant
instances that may face this issue:
-
[lsp_store.rs#L3578](0173479d18/crates/project/src/lsp_store.rs (L3578))
-
[worktree.rs#L4338](0173479d18/crates/worktree/src/worktree.rs (L4338))
Switching `Worktree::abs_path` to return `SanitizedPath` would resolve
these issues but would also lead to many code changes.
Any suggestions or feedback on this approach are very welcome.
cc @SomeoneToIgnore
Release Notes:
- N/A
Follow-up of https://github.com/zed-industries/zed/pull/21173
Rust-analyzer with `checkOnSave` enabled will push diagnostics for a
file after each diagnostics refresh (e.g. save, file open, file close).
If there's a file that is not open in any pane and has only warnings,
and the diagnostics editor has warnings toggled off, then
0. rust-analyzer will push the corresponding warnings after initial load
1. the diagnostics editor code registers
`project::Event::DiagnosticsUpdated` for the corresponding file path and
opens the corresponding buffer to read its associated diagnostics from
the snapshot
2. opening the buffer would send `textDocument/didOpen` which would
trigger rust-analyzer to push the same diagnostics
3. meanwhile, the diagnostics editor would filter out all diagnostics
for that buffer, dropping the open buffer and effectively closing it
4. closing the buffer will send `textDocument/didClose` which would
trigger rust-analyzer to push the same diagnostics again, as those are
`cargo check` ones, still present in the file
5. GOTO 1
Release Notes:
- Fixed diagnostics editor not scrolling properly under certain
conditions
This is a pure refactor, motivated by wanting to introduce to the
BufferStore new logic for opening staged and committed changes.
I found the `BufferStoreImpl` trait a little bit confusing, particularly
how the different implementors of the trait held a handle back to the
owning buffer store. I was able to reduce the amount of code
considerably (-78 lines) by using a two-variant enum instead, similar to
what we do for `LspStore`, `WorktreeStore` and `Worktree`.
Release Notes:
- N/A
The goal is to be able to hide these lines from a task output:
```sh
⏵ Task `...` finished successfully
⏵ Command: ...
```
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
I've observed that Zed's implementation of [Code Actions On
Format](https://zed.dev/docs/configuring-zed#code-actions-on-format)
uses the
[CodeActionContext.only](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#codeActionContext)
parameter to request specific code action kinds from the server. The
issue is that it does not filter out code actions from the response,
believing that the server will do it.
The [LSP
specification](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#codeActionContext)
says that the client is responsible for filtering out unwanted code
actions:
```js
/**
* Requested kind of actions to return.
*
* Actions not of this kind are filtered out by the client before being
* shown. So servers can omit computing them.
*/
only?: CodeActionKind[];
```
This PR will filter out unwanted code action on the client side.
I have initially encountered this issue because the [ZLS language
server](https://github.com/zigtools/zls) (until
https://github.com/zigtools/zls/pull/2087) does not filter code action
based on `CodeActionContext.only` so Zed runs all received code actions
even if they are explicitly disabled in the `code_actions_on_format`
setting.
Release Notes:
- Fix the `code_actions_on_format` setting when used with a language
server like ZLS
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
We occasionally see dates in the future appearing in our telemetry. One
hypothesis is that this is caused by a clock change while Zed is running
causing date math based on chrono to be incorrect.
Instant *should* be a more stable source of relative timestamps.
Release Notes:
- N/A
`create_buffer` calls `Buffer::local` which sets `file` to `None`
[here](f12981db32/crates/language/src/buffer.rs (L629)).
So there's no point in then immediately attempting to update maps that
rely on `file` being present.
Release Notes:
- N/A
Motivation for this is to make things more understandable while figuring
out #20775.
This is intended to be a refactoring that does not affect behavior, but
there are a few tricky spots:
* Previously `File.mtime()` (now `File.disk_state().mtime()`) would
return last known modification time for deleted files. Looking at uses,
I believe this will not affect anything. If there are behavior changes
here I believe they would be improvements.
* `BufferEvent::DirtyChanged` is now only emitted if dirtiness actually
changed, rather than if it may have changed. This should only be an
efficiency improvement.
Release Notes:
- N/A
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This change ensures we always run LSPs with the project environment (in
addition to any overrides they provide). This helps ensure the
environment is
set correctly on remotes where we don't load the login shell environment
and
assign it to the current process.
Also fixed the go language to use the project env to find the go
command.
Release Notes:
- Improved environment variable handling for SSH remotes
Closes#19227
Since items listed in `.gitignore` file are not included in a worktree,
python virtual environment cannot be detected until venv directory is
unfolded from project panel and forcefully added into worktree. I didn't
come up with anything better than scanning fs directly. I'm not sure how
it will affect remote development. if at all.
Release Notes:
- Fixed detection of `detect_venv.directories` ignored by a worktree
A straight alphabetical order is arguably clearer, and avoids a large
initial delay when searching large repos.
Release Notes:
- Fixed a long initial delay when performing a project search in a large
repository.
This fixes the issue of multiple language servers showing up as `node`
in the language server logs dropdown.
It does this by changing `language_server.name()` to return the
adapter's name, not the binary name, and changing types to make sure
that we always use this.
Release Notes:
- Fixed language server names showing up only as `"node"`
---------
Co-authored-by: Sam Rose <hello@samwho.dev>
Co-authored-by: Bennet <bennet@zed.dev>
Closes#11529
Release Notes:
- Fixed an issue where the image preview would not update when the
underlying file changed
---------
Co-authored-by: Bennet <bennet@zed.dev>
This PR improves how we handle completions in buffers with multiple
LSPs.
Context: while working on
https://github.com/zed-industries/zed/issues/19777 with @mgsloan we
noticed that completion triggers coming from language servers are not
tracked properly. Namely, each buffer has `completion_triggers` field
which is read from the configuration of a language server. The problem
is, there can be multiple language servers for a single buffer, in which
case we'd just stick to the one that was registered last.
This PR makes the tracking a bit more fine-grained. We now track not
only what the completion triggers are, but also their origin server id.
Whenever completion triggers are updated, we recreate the completion
triggers set.
Release Notes:
- Fixed completions not triggering when multiple language servers are
used for a single file.
Reimplements `pet::EnvironmentApi`, trying to access the `project_env`
first
Closes#20177
Release Notes:
- Fixed python toolchain detection when worktree local path is set
