Sharing a project displays a notification (window) on every screen.
Previously there was an issue with the positioning of windows on all
screens except the primary screen.
As you can see here:
Now:
@mikayla-maki and I also decided to refactor the `WindowOptions` a bit.
Previously you could specify bounds which controlled the positioning and
size of the window in the global coordinate space, while also providing
a display id (which screen to show the window on). This can lead to
unusual behavior because you could theoretically specify a global bound
which does not even belong to the display id which was provided.
Therefore we changed the api to this:
```rust
struct WindowOptions {
/// The bounds of the window in screen coordinates
/// None -> inherit, Some(bounds) -> set bounds.
pub bounds: Option<Bounds<DevicePixels>>,
/// The display to create the window on, if this is None,
/// the window will be created on the main display
pub display_id: Option<DisplayId>,
}
```
This lets you specify a display id, which maps to the screen where the
window should be created and bounds relative to the upper left of the
screen.
Release Notes:
- Fixed positioning of popup windows (e.g. when sharing a project) when
using multiple external displays.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This pull request introduces a new `InlineCompletionProvider` trait,
which enables making `Editor` copilot-agnostic and lets us push all the
copilot functionality into the `copilot_ui` module. Long-term, I would
like to merge `copilot` and `copilot_ui`, but right now `project`
depends on `copilot`, which makes this impossible.
The reason for adding this new trait is so that we can experiment with
other inline completion providers and swap them at runtime using config
settings.
Please, note also that we renamed some of the existing copilot actions
to be more agnostic (see release notes below). We still kept the old
actions bound for backwards-compatibility, but we should probably remove
them at some later version.
Also, as a drive-by, we added new methods to the `Global` trait that let
you read or mutate a global directly, e.g.:
```rs
MyGlobal::update(cx, |global, cx| {
});
```
Release Notes:
- Renamed the `copilot::Suggest` action to
`editor::ShowInlineCompletion`
- Renamed the `copilot::NextSuggestion` action to
`editor::NextInlineCompletion`
- Renamed the `copilot::PreviousSuggestion` action to
`editor::PreviousInlineCompletion`
- Renamed the `editor::AcceptPartialCopilotSuggestion` action to
`editor::AcceptPartialInlineCompletion`
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Kyle <kylek@zed.dev>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
This PR fixes file name coloring in the project panel and tabs when
.gitignore file is updated. It's intended to fix#7831.
There's another, less vivid, problem with git-aware labels coloring.
It's about files that are both ignored and contained in the git index.
I'll file a separate issue for it to keep this fix focused.
Release Notes:
- Fixed file Git status refreshing on .gitignore update (#7831).
this PR allows users to use `cmd` instead of `alt` as the
`multi_cursor_modifier` for creating multiple cursors/selections
closes#4339
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
For #4440, I've only added support for normal, if it's visual mode,
would we like this to delete the current selection row and enter insert
mode?
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Fixes
https://github.com/orgs/zed-industries/projects/14/views/1?pane=issue&itemId=56263346
Fixes a state where Zed multi buffers were not reachable after going to
an excerpt inside it (with alt-enter).
I suspect, we will have to come back to multi buffer history and check
the way it behaves on inner excerpts clicking, but now this change seems
to restore the main thing: multi buffers not being shown in the history
at all.
Release Notes:
- Fixes "go backwards" not considering multibuffers in history
The important change here is to ensure that undo never lands you in
visual mode; but we also take care to restore the selection the same way
vim does (visual line goes to beginning of line, visual block to the top
left, etc.).
To help make this behaviour feel right we also group any deletions that
started insert mode with the first text inserted.
Fixes: #7521
Release Notes:
- vim: Improved undo. It will now restore you to normal mode in the same
position as vim, and group deletions caused by `c` or `s` with the
concomitant insert.
([#7521](https://github.com/zed-industries/zed/issues/7521)).
Several improvements in how various markers are displayed in the editor
scrollbar, as described in #9070, if you're ok with the proposal:
- Scrollbar has three columns:
- 1st is for git markers
- 2nd is for selections and search resulta highlightings
- 3rd is for diagnostics
- Height of all markers is scaled, but there's a minimal allowed height
of 2px.
- Right border removed from both the scrollbar and thumb to make more
room for markers.
Release Notes:
- Improved scrollbar markers visualization (#9070).
This fixes#9292 by adding a section to the language server settings
that allows users to specify the binary path and arguments with which to
start up a language server.
Example user settings for `rust-analyzer`:
```json
{
"lsp": {
"rust-analyzer": {
"binary": {
"path": "/Users/thorstenball/tmp/rust-analyzer-aarch64-apple-darwin",
"arguments": ["--no-log-buffering"]
}
}
}
}
```
Constraints:
* Right now this only allows ABSOLUTE paths.
* This is only used by `rust-analyzer` integration right now, but the
setting can be used for other language servers. We just need to update
the adapters to also respect that setting.
Release Notes:
- Added ability to specify `rust-analyzer` binary `path` (must be
absolute) and `arguments` in user settings. Example: `{"lsp":
{"rust-analyzer": {"binary": {"path": "/my/abs/path/rust-analyzer",
"arguments": ["--no-log-buffering"] }}}}`
([#9292](https://github.com/zed-industries/zed/issues/9292)).
Co-authored-by: Ricard Mallafre <rikitzzz@gmail.com>
Closes#5178
Release Notes:
- Added a `file_types` setting that can be used to associate languages
with file names and file extensions. For example, to interpret all `.c`
files as C++, and files called `MyLockFile` as TOML, add the following
to `settings.json`:
```json
{
"file_types": {
"C++": ["c"],
"TOML": ["MyLockFile"]
}
}
```
As with most zed settings, this can be configured on a per-directory
basis by including a local `.zed/settings.json` file in that directory.
---------
Co-authored-by: Marshall <marshall@zed.dev>
This PR changes GPUI to open windows with a default size and location,
and to otherwise inherit from their spawning window.
Note: The linux build now crashes on startup.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Ezekiel Warren <zaucy@users.noreply.github.com>
FindAllReferences LSP requests might take a long time to complete, and
currently Zed allows multiple requests spawned concurrently for the same
Anchor in the multi buffer. That results in multiple search results'
multi buffers appearing, sometimes at once, which is not what we want.
Part of https://github.com/zed-industries/zed/issues/5351 that helps to
reduce the amount of search results after clicks that did not resolve
instantly.
Release Notes:
- Improved FindAllReferences action by not allowing concurrent requests
for the same multi buffer source
Closes https://github.com/zed-industries/zed/issues/5275
Double click with `alt` modifier pressed will do the regular word
selection.
Adds a setting to disable this behavior and instead select a word, as in
the regular buffer.
```
// What to do when multibuffer is double clicked in some of its excerpts
// (parts of singleton buffers).
// May take 2 values:
// 1. Behave as a regular buffer and select the whole word.
// "double_click_in_multibuffer": "select"
// 2. Open the excerpt clicked as a new buffer in the new tab (default).
// "double_click_in_multibuffer": "open",
// For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
"double_click_in_multibuffer": "open",
```
Release Notes:
- Made multibuffer to open excerpts in new tabs on double click by
default (changing settings or keeping alt restores the word selection
behavior). ([5275](https://github.com/zed-industries/zed/issues/5275))
This fixes https://github.com/zed-industries/zed/issues/9069 by
1. reverting https://github.com/zed-industries/zed/issues/7819
2. fixing completion filtering with regards to word boudaries
For (2) see explanation in commit message:
> Previously, this would only split words on upper-lower boundaries or
> on `_`/`-`.
>
> The result was that we would filter out completions too aggressively.
> The filter works by taking a suggested completion, say `foo_bar_lol`,
split
> it up into words - `foo`, `bar, `lol` - and check whether any of the
words
> start with the same characters as what the user already typed: `fo`,
or `bar`,
> ...
>
> In the case of Ruby, though, `:` wasn't considered a word boundary. If
the
> LSP would return `:foobar` when the user typed `:foo`, we'd check if
there are
> any completions that match `foo` (because that's the current word) but
> we'd compare against `foobar`, not `:` or `:foobar`.
>
> With this change, we get more match candidates and thus more
completions in Ruby.
With that we can do (1) because we don't need these characters as word
characters anymore to trigger completions.
Release Notes:
- Fixed word boundaries in Ruby by restoring old behavior (`@`, `:`, ...
are no longer considered word characters)
([#9069](https://github.com/zed-industries/zed/issues/9069))
- Fixed completions being filtered out when they happened at word
boundaries on special characters (e.g. `:`)
---------
Co-authored-by: Max <max@zed.dev>
This is just a refactor. I noticed that we now have a `project_core`
crate, which mainly contains the `Worktree` type and its private
helpers, plus the project's settings.
In this PR, I've renamed that crate to `worktree` and did some minor
simplification to its module structure. I also extracted a new
`WorktreeSettings` settings type from the `ProjectSettings`, so that the
worktree settings could live in the worktree crate. This way, the crate
is now exclusively about worktree logic.
Release Notes:
- N/A
We were seeing weird layouts with large files, where - starting with
some verylargelineindex - lines were rendered at weird y offsets. It
turned out that in some cases we're doing operations on Pixel values of
different magnitude, which then led to wrong results in calculations.
This commit addresses some of these problems, visible at glance when
working with large plaintext files. I *did not* dig into things like
inlay hints or diagnostics to see if they are subject to the same
potential precision loss.
Fixes#5371
Release Notes:
- Fixed editor layout for large files, where the lines might have been
laid out with incorrect Y offset from the top.
Right now we're basing the width of the menu on the longest code action
title. That is only an approximation and doesn't always coincide
perfectly with the true, longest code action.
Given that it's pretty close, however, this commit simply disables text
wrapping on the code action menu.
Release Notes:
- Fixed a rendering glitch that could cause code actions to not display
correctly ([#8341](https://github.com/zed-industries/zed/issues/8341))
See https://zed.dev/channel/gpui-536
Fixes https://github.com/zed-industries/zed/issues/9010
Fixes https://github.com/zed-industries/zed/issues/8883
Fixes https://github.com/zed-industries/zed/issues/8640
Fixes https://github.com/zed-industries/zed/issues/8598
Fixes https://github.com/zed-industries/zed/issues/8579
Fixes https://github.com/zed-industries/zed/issues/8363
Fixes https://github.com/zed-industries/zed/issues/8207
### Problem
After transitioning Zed to GPUI 2, we started noticing that interacting
with the mouse on many UI elements would lead to a pretty annoying
flicker. The main issue with the old approach was that hover state was
calculated based on the previous frame. That is, when computing whether
a given element was hovered in the current frame, we would use
information about the same element in the previous frame.
However, inspecting the previous frame tells us very little about what
should be hovered in the current frame, as elements in the current frame
may have changed significantly.
### Solution
This pull request's main contribution is the introduction of a new
`after_layout` phase when redrawing the window. The key idea is that
we'll give every element a chance to register a hitbox (see
`ElementContext::insert_hitbox`) before painting anything. Then, during
the `paint` phase, elements can determine whether they're the topmost
and draw their hover state accordingly.
We are also removing the ability to give an arbitrary z-index to
elements. Instead, we will follow the much simpler painter's algorithm.
That is, an element that gets painted after will be drawn on top of an
element that got painted earlier. Elements can still escape their
current "stacking context" by using the new `ElementContext::defer_draw`
method (see `Overlay` for an example). Elements drawn using this method
will still be logically considered as being children of their original
parent (for keybinding, focus and cache invalidation purposes) but their
layout and paint passes will be deferred until the currently-drawn
element is done.
With these changes we also reworked geometry batching within the
`Scene`. The new approach uses an AABB tree to determine geometry
occlusion, which allows the GPU to render non-overlapping geometry in
parallel.
### Performance
Performance is slightly better than on `main` even though this new
approach is more correct and we're maintaining an extra data structure
(the AABB tree).
Release Notes:
- Fixed a bug that was causing popovers to flicker.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Thorsten <thorsten@zed.dev>
Prepare for git diff hunk highlights by grouping all inlay highlight
properties into one struct, and removing the dead background highlight
code.
Release Notes:
- N/A
We were seeing panics due to callers assuming they had valid
excerpt_ids, but that cannot easily be guaranteed across await points as
anyone may remove an excerpt.
Release Notes:
- Fixed a panic when hovering in a multibuffer
Release Notes:
- Changed default keybindings in the VS Code keymap so that
`alt-[up|down]` now move lines up/down and`alt-shift-[up|down]`
duplicate lines up/down. Previous bindings for selecting larger/smaller
syntax nodes are now bound to `ctrl-shift-[left|right]`.
([#4652](https://github.com/zed-industries/zed/issues/4652))([#7151](https://github.com/zed-industries/zed/issues/7151))
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This PR moves the Clippy configuration up to the workspace level.
We're using the [`lints`
table](https://doc.rust-lang.org/cargo/reference/workspaces.html#the-lints-table)
to configure the Clippy ruleset in the workspace's `Cargo.toml`.
Each crate in the workspace now has the following in their own
`Cargo.toml` to inherit the lints from the workspace:
```toml
[lints]
workspace = true
```
This allows for configuring rust-analyzer to show Clippy lints in the
editor by using the following configuration in your Zed `settings.json`:
```json
{
"lsp": {
"rust-analyzer": {
"initialization_options": {
"check": {
"command": "clippy"
}
}
}
}
```
Release Notes:
- N/A
Previously this code would call `project.visible_worktrees(cx).next`
which might not necessarily return the worktree matching the currently
open file.
What this change does is it adds `get_repo` method on `Project` that
allows us to get the `GitRepository` for the current buffer.
Release Notes:
- Fixed `open permalink to line` not working when multiple folders are
added to the project.
Co-authored-by: Mikayla <mikayla@zed.dev>
Before this change they would disappear if you blurred the pane.
Release Notes:
- Fixed an issue where the followed users' cursor would disappear if you
blurred the pane.
