Closes#7688
Release Notes:
- (breaking change) Stop binding keyboard shortcuts to alt-[a-z]. These
get in the way of typing characters. This is usually not an issue for
English speakers because we don't use many characters; but for other
Latin-based languages with diacritics our shortcuts prevent them typing
what they need to type.
This primarily affects Zed's extra features:
* `alt-q` => `cmd-k q` on maOS, `ctrl-k q` on Linux for `editor::Rewrap`
* `alt-z` => `cmd-k z` on macOS `ctrl-k z` on Linux for
`editor::ToggleSoftWrap`
* `alt-m` => `ctrl-shift-m` for `assistant::ToggleModelSelector`
* `alt-v` => `ctrl-shift-v` for `["editor::MovePageUp", {
"center_cursor": true }]` (macOS only)
* `alt-t` => `cmd-shift-r` on maOS, `ctrl-shift-r` on Linux for
`task::Spawn` (The previous binding for `editor::RevealInFileManager`
now only applies in the project panel)
* `alt-shift-t` => `alt-cmd-r` on maOS, `ctrl-alt-r` on Linux for
`task::Rerun`
* `alt-shift-f` => `ctrl-shift-f` for
`project_panel::SearchInDirectory`.
But also overrides some bindings from Readline.
* `alt-h` => `alt-backspace` for `editor::DeleteToPreviousWordStart`
* `alt-d` => `alt-delete` for `editor::DeleteToNextWordEnd`
* `alt-f` => `ctrl-f` for `editor:: MoveToNextWordEnd` (`ctrl-f` was
previously `editor::MoveRight`)
* `alt-b` => `ctrl-b` for `editor::MoveToNextWordStart` (`ctrl-b` was
previously `editor::MoveLeft`)
Note that `alt-t` and `alt-shift-t` have been kept as aliases (because
no-one complained about `t` yet; but we may remove them completely in
the future).
JetBrains IDE's use `ctrl-w` and `ctrl-shift-w` on Win/Linux and
`cmd-up` and `cmd-down` on mac to extend/shrink selections.
https://www.jetbrains.com/guide/java/tips/extend-selection/
Release Notes:
- Fixed extend/shrink selection on JetBrains keymap
Closes#19417
Release Notes:
- vim : Added `r` and `a` as aliases for `[` and `<` text objects
(copying vim-surround).
- vim: (breaking change) rebound the function argument text object to
`g`.
- vim: Fixed surrounds to allow `b`/`B`/`r`/`a` anywhere you could use
`(`, `{`, `[`, `<`.
---
- vim: Added `b`, `B`, `r`, `s`, `a` as aliases for `()`, `{}`, `[]`,
`<>` in vim surround mode.
- Adds a new `surround_alias` function where aliases are defined.
- This function is used in `find_surround_pairs` to substitute the
chosen text with the alias
- The keymap is also modified to add support for Square and Angle
brackets when changing surrounds. These two were added to follow the
example of Tim Pope's ubiquitous `vim-surround` plugin.
- I had to overwrite the `vim::Argument` keybind in order to do this. I
moved it to use the `g` modifier. I realize this is a breaking change
and will happily move the `vim::AngleBracket` keymap to a different
letter if you'd like to avoid this. I'm just trying to keep with
convention. Ideally, Users would be able to define surround aliases
themselves in the config file but that's a much bigger task than I'm
able to do right now.
- I also added tests for the new aliases.
Thanks for making such a clean and organized codebase. I was able to
find the relevant section of code rather quickly thanks to this.
Release Notes:
- vim: Add `ctrl-v`/`ctrl-q` to type any unicode code point. For example
`ctrl-v escape` inserts an escape character(U+001B), or `ctrl-v u 1 0 E
2` types ტ (U+10E2). As in vim `ctrl-v ctrl-j` inserts U+0000 not
U+000A. Zed does not yet implement insertion of the vim-specific
representation of the typed keystroke for other keystrokes.
- vim: Add `ctrl-shift-v` as an alias for paste on Linux
Add an edit button to the assistant. This is totally hacked in for now,
just to see how this would feel rendered simply in the UI.
cc @as-cii @danilo-leal
Release Notes:
- N/A
---------
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
I went with Cmd-Shift-Y on macOS (Ctrl-Shift-Y on Linux) for "yes accept
this individual hunk" - both are currently unused.
I went with Cmd-Shift-A on macOS (Ctrl-Alt-A on Linux) for "accept all
hunks" - both are unused. (Ctrl-Shift-A on Linux was taken, as is
Ctrl-Alt-Y, so although the pairing of Ctrl-Shift-Y and Ctrl-Alt-A isn't
necessarily obvious, the letters seem intuitive - "yes" and "all" - and
those key combinations don't conflict with anything.)
Release Notes:
- Added keybindings for applying hunks in Proposed Changes
<img width="247" alt="Screenshot 2024-10-25 at 12 47 00 PM"
src="https://github.com/user-attachments/assets/d6355621-ba80-4ee2-8918-b7239a4d29be">
This commit adds support for using the physical insert-button. First
click toggles insert mode and subsequent clicks toggle back and forth
between replace and insert mode.
Closes#19224
Release Notes:
- Added support for using the insert button for vim_mode.
This PR changes the SSH modal design so its more keyboard
navigation-friendly and adds the server nickname feature.
Release Notes:
- N/A
---------
Co-authored-by: Danilo <danilo@zed.dev>
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Closes#7417
Release Notes:
- Added basic support for Alacritty's [vi
mode](https://github.com/alacritty/alacritty/blob/master/docs/features.md#vi-mode)
to the built-in terminal (which is using Alacritty under the hood.) The
vi mode can be activated with `ctrl-shift-space` and then supports some
basic motions to navigate through the terminal's scrollback buffer.
## Details
Leverages existing selection functionality from mouse_drag and the
ViMotion API of alacritty to add basic vi motions in the terminal.
Please note, this is only basic functionality (move, select, and yank to
system clipboard) and not a fully functional vim environment (e.g.
search, configurable keybindings, and paste). I figured this would be an
interim solution to the long term, more fleshed out, solution proposed
by @mrnugget.
Ctrl+Shift+Space to enter Vi mode while in the terminal (Same default
binding in alacritty)
Fixes some missing shortcuts from Tooltips like the project search,
buffer search, quick action bar, ....
https://github.com/user-attachments/assets/d3a0160a-8d6e-4ddc-bf82-1fabeca42d59
This should hopefully help new users learn and discover some nice
keyboard shortcuts
Release Notes:
- Display keyboard shortcuts inside tooltips in the project search,
buffer search etc.
Closes#6822
Updates #5142
Release Notes:
- Added new fold actions to toggle folds (`cmd-k cmd-l`), fold every
fold (`cmd-k cmd-0`) unfold every fold (`cmd-k cmd-j`) to fold
recursively (`cmd-k cmd-[`) and unfold recursively (`cmd-k cmd-]`).
- vim: Added `za` to toggle fold under cursor.
- vim: Added `zO`/`zC`/`zA` to open, close and toggle folds recursively
(and fixed `zc` to not recurse into selections).
- vim: Added `zR`/`zM` to open/close all folds in the buffer.
Release Notes:
- Added a new `assistant.inline_alternatives` setting to configure
additional models that will be used to perform inline assists in
parallel.
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Roy <roy@anthropic.com>
Co-authored-by: Adam <wolffiex@anthropic.com>
Some notes:
- You can put the cursor on the start or end line with triple backticks,
it doesn't actually have to be inside the block.
- Placing the cursor outside of a code block does nothing.
- Code blocks are determined by counting triple backticks pairs from
either start or end of buffer, and nothing else.
- If you manually select something, the selection takes precedence over
any code blocks.
Release Notes:
- Added the ability to copy surrounding code blocks in the assistant
panel into the clipboard, or inserting them directly into the editor,
without manually selecting. Place cursor anywhere in a code block
(marked by triple backticks) and use the `assistant::CopyCode` action
(`cmd-k c` / `ctrl-k c`) to copy to the clipboard, or the
`assistant::InsertIntoEditor` action (`cmd-<` / `ctrl-<`) to insert into
editor.
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Bennet <bennet@zed.dev>
This PR adds a keybinding for the `editor: rewrap` command.
It is bound to `alt-q`, by default. In Vim mode, it is bound to `g q`.
Release Notes:
- N/A
Release Notes:
- vim: Added `:diff` and `:revert` (that work with `'<,'>`) to open the
selected diff and revert it.
- vim: Added `d o` to open the diff and `d p` to revert (spiritually
similar to vim's do/dp, though obviously not the same)
- vim: Added `ctrl-p` and `ctrl-n` to summon the autocomplete menu in
insert mode.
- Fixes incorrect shorcuts being displayed in Linux context menus.
- Re-ordering them within the json object doesn't work, but putting them in a dedicate block does.
- Improved Sublime keymap: Support for switching to individual tabs with `cmd-1` thru `cmd-9` (MacOS) and `alt-1` thru `alt-9` (Linux) matching Sublime behavior.
Follow-up https://github.com/zed-industries/zed/pull/16085 that fixes
the search deploy to be actually a part of the terminal-related
bindings.
Part of https://github.com/zed-industries/zed/issues/16839
Also
* fixes few other bindings to use `shift` and avoid conflicts with the
existing key bindings.
* adds terminal inline assist to the context menu and makes both the
menu and the button to dynamically adjust to `assist.enabled` settings
change
It is still unclear to me, why certain labels for certain bindings are
wrong (it's still showing `ctrl-w` for closing the terminal tab, and
`shift-insert` instead of `ctrl-shift-v` for Paste, while Insert is near
and has a `ctrl-shift-c` binding shown) but at least the keys work now.
Release notes:
- Improved Linux terminal keymap and context menu
Prototypes a way to display new entities in the outline panel, making it
less outline.
The design is not final and might be adjusted, but the workflow seems to
be solid enough to keep and iron it out.
* Now, when any project search buffer is activated (multi buffer mode),
or buffer search is open (singleton buffer mode, but is available for
search usages multi buffer too — in that case buffer search overrides
multi buffer's contents display), outline panel displays all search
matches instead of the outline items.
Outline items are not displayed at all during those cases, unless the
buffer search is closed, or a new buffer gets opened, of an active
buffer search matches zero items.
https://github.com/user-attachments/assets/4a3e4faa-7f75-4522-96bb-3761872c753a
* For the multi buffer mode, search matches are grouped under
directories and files, same as outline items
* For buffer search , search matches are displayed one under another
For both cases, the entire match line is taken and rendered, with the
hover tooltip showing the line number.
So far it does not look very bad, but I am certain there are bad cases
with long lines and bad indents where it looks not optimal — this part
most probably will be redesigned after some trial.
Or, maybe, it's ok to leave the current state if the horizontal
scrollbar is added?
Clicking the item navigates to the item's position in the editor.
Search item lines are also possible to filter with the outline panel's
filter input.
* Inline panel is now possible to "pin" to track a currently active
editor, to display outlines/search results for that editor even if
another item is activated afterwards:
This is useful in combination with project search results display: now
it's possible to leave the search results pinned in the outline panel
and jump to every search result and back.
If the item the panel was pinned to gets closed, the panel gets back to
its regular state, showing outlines/search results for a currently
active editor.
Release Notes:
- Added a way to display buffer/project search entries in the outline
panel
Release Notes:
- vim: Added `gf` command to open files under the cursor.
- Filenames can now be `cmd`/`ctrl`-clicked, which opens them.
TODOs:
- [x] `main_test.go` <-- works
- [x] `./my-pkg/my_pkg.go` <-- works
- [x] `../go.mod` <-- works
- [x] `my-pkg/my_pkg.go` <-- works
- [x] `my-pkg/subpkg/subpkg_test.go` <-- works
- [x] `file\ with\ space\ in\ it.txt` <-- works
- [x] `"file\ with\ space\ in\ it.txt"` <-- works
- [x] `"main_test.go"` <-- works
- [x] `/Users/thorstenball/.vimrc` <-- works, but only locally
- [x] `~/.vimrc` <--works, but only locally
- [x] Get it working over collab
- [x] Get hover links working
Demo:
https://github.com/user-attachments/assets/26af7f3b-c392-4aaf-849a-95d6c3b00067
Collab demo:
https://github.com/user-attachments/assets/272598bd-0e82-4556-8f9c-ba53d3a95682
Reverts zed-industries/zed#15981
Release Notes:
- Restored the behavior of `ctrl-a` until we can separate the behavior
of the command for soft wraps and leading indentation.
This PR:
- Makes slash commands easier to compose by adding a concept,
`CompletionIntent`. When using `tab` on a completion in the assistant
panel, that completion item will be expanded but the associated command
will not be run. Using `enter` will still either run the completion item
or continue command composition as before.
- Fixes a bug where running `/diagnostics` on a project with no
diagnostics will delete the entire command, rather than rendering an
empty header.
- Improves the autocomplete rendering for files, showing when
directories are selected and re-arranging the results to have the file
name or trailing directory show first.
<img width="642" alt="Screenshot 2024-08-13 at 8 12 43 PM"
src="https://github.com/user-attachments/assets/97c96cd2-741f-4f15-ad03-7cf78129a71c">
Release Notes:
- N/A
- Make `ctrl-a` and `ctrl-e` ignore soft_wraps on MacOS, matching the behavior of VSCode.
- Unchanged: `home`, `end`, `cmd-left`, `cmd-right` respect softwrap (both in Zed and VSCode).
