Release Notes:
- linux: Added a fallback Open picker for when XDG is not working
- Added a new setting `use_system_path_prompts` (default true) that can
be disabled to use Zed's builtin keyboard-driven prompts.
---------
Co-authored-by: Max <max@zed.dev>
Release Notes:
- Added support for following into the assistant panel.
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Nathan <nathan@zed.dev>
For: #13417
This is a simple version, I'm not sure if we just need to limit this
feature to vim mode, or maybe in normal editor mode, which involves
other logic like the location of the setting
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Introduces the `ZED_WINDOW_DECORATIONS` env variable.
- Not set, defaulting to client-side decorations
- Value is "client": client-side decorations
- Value is "server": server-side decorations
I think it's good to have this escape-hatch next to all possible
detection mechanisms.
Release Notes:
- N/A
By leveraging the `_GTK_EDGE_CONSTRAINTS` atom we can get all four
booleans for the `Tiling` struct and figure out which side is free when
the window is tiled to half of the screen.
For the logic behind the `_GTK_EDGE_CONSTRAINTS` see:
-
8e9d13aa3b/src/x11/window-x11.c (L65-L75)
-
8e9d13aa3b/src/x11/window-x11.c (L1205-L1231)
(I used Claude 3.5 Sonnet with our code and these pieces from `mutter`
to generate the Rust code, that was pretty sweet)
This fixes the gap in the middle when a GPUI window is tiled to the left
and another window to the right.
It's not _perfect_ but it looks a lot better.
Here's a diff that makes it look better:
```diff
diff --git a/crates/gpui/examples/window_shadow.rs b/crates/gpui/examples/window_shadow.rs
index 122231f6b..7fa29dadc 100644
--- a/crates/gpui/examples/window_shadow.rs
+++ b/crates/gpui/examples/window_shadow.rs
@@ -72,8 +72,8 @@ impl Render for WindowShadow {
.when(!(tiling.top || tiling.left), |div| div.rounded_tl(rounding))
.when(!tiling.top, |div| div.pt(shadow_size))
.when(!tiling.bottom, |div| div.pb(shadow_size))
- .when(!tiling.left, |div| div.pl(shadow_size))
- .when(!tiling.right, |div| div.pr(shadow_size))
+ .when(!tiling.left, |div| div.pl(shadow_size - border_size))
+ .when(!tiling.right, |div| div.pr(shadow_size - border_size))
.on_mouse_move(|_e, cx| cx.refresh())
.on_mouse_down(MouseButton::Left, move |e, cx| {
let size = cx.window_bounds().get_bounds().size;
```
But that makes it look weird on Wayland, so I didn't do it.
I think it's fine for now. Chromium looks bad and has a gap, so we're
already better.
## Before
## After
Release Notes:
- N/A
In the latest update, panel loading occasionally occurred randomly,
either before or after workspace deserialization due to their
asynchronous nature. This update addresses the issue by ensuring panels
restore their state based on serialized data, synchronizing their
loading with workspace deserialization.
Release Notes:
- Fixed [#9638](https://github.com/zed-industries/zed/issues/9638)
- Fixed [#12954](https://github.com/zed-industries/zed/issues/12954)
This PR adds support for full client side decorations on X11 and Wayland
TODO:
- [x] Adjust GPUI APIs to expose CSD related information
- [x] Implement remaining CSD features (Resizing, window border, window
shadow)
- [x] Integrate with existing background appearance and window
transparency
- [x] Figure out how to check if the window is tiled on X11
- [x] Implement in Zed
- [x] Repeatedly maximizing and unmaximizing can panic
- [x] Resizing is strangely slow
- [x] X11 resizing and movement doesn't work for this:
https://discord.com/channels/869392257814519848/1204679850208657418/1256816908519604305
- [x] The top corner can clip with current styling
- [x] Pressing titlebar buttons doesn't work
- [x] Not showing maximize / unmaximize buttons
- [x] Noisy transparency logs / surface transparency problem
https://github.com/zed-industries/zed/pull/13611#issuecomment-2201685030
- [x] Strange offsets when dragging the project panel
https://github.com/zed-industries/zed/pull/13611#pullrequestreview-2154606261
- [x] Shadow inset with `_GTK_FRAME_EXTENTS` doesn't respect tiling on
X11 (observe by snapping an X11 window in any direction)
Release Notes:
- N/A
---------
Co-authored-by: conrad <conrad@zed.dev>
Co-authored-by: Owen Law <81528246+someone13574@users.noreply.github.com>
Co-authored-by: apricotbucket28 <71973804+apricotbucket28@users.noreply.github.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Previously replace_all amounted to what could be achieved by repeatedly
mashing "Replace" button, which had a bunch of overhead related to
buffer state syncing. This commit gets rid of the automated button
mashing, processing all of the replacements in one go.
Fixes#13455
Release Notes:
- Improved performance of "replace all" in buffer search and project
search
This fixes#13316 by checking whether there are any local workspace
settings for a given file.
Release Notes:
- Fixed `autosave` settings in project-specific settings file being
ignored. ([#13316](https://github.com/zed-industries/zed/issues/13316)).
Co-authored-by: Bennet <bennet@zed.dev>
<img width="1266" alt="Screenshot 2024-06-10 at 14 33 32"
src="https://github.com/zed-industries/zed/assets/1347854/c75de033-f2c8-4500-8b34-46b5f0260d3d">
This changes the recent projects panel to use the order of paths from
the workspace rather than always being alphanumerical.
This follows the work to introduce manual workspace ordering to ensure
the recent projects paths reflect the order of paths in the main project
panel.
Release Notes:
- Improve the recent project panel by ordering paths using the workspace
order
### TODO
- [x] Make sure keybinding shows up in pane + menu
- [x] Selection tool in the editor toolbar
- [x] Application Menu
- [x] Add more options to pane + menu
- Go to File...
- Go to Symbol in Project...
- [x] Add go items to the selection tool in the editor:
- Go to Symbol in Editor...
- Go to Line/Column...
- Next Problem
- Previous Problem
- [x] Fix a bug where modals opened from a context menu aren't focused
correclty
- [x] Determine if or what needs to be done with project actions:
- Difficulty is that these are exposed in the UI via clicking the
project name in the titlebar or by right clicking the root entry in the
project panel. But they require reading and are two clicks away. Is that
sufficient?
- Add Folder to Project
- Open a new project
- Open recent
- [x] Get a style pass
- [x] Implement style pass
- [x] Fix the wrong actions in the selection menu
- [x] Show selection tool toggle in the 'editor settings' thing
- [x] Put preferences section from the app menu onto the right hand user
menu
- [x] Add Project menu into app menu to replace 'preferences' section,
and put the rest of the actions there
- [ ] ~~Adopt `...` convention for opening a surface~~ uncertain what
this convention is.
- [x] Adopt link styling for webview actions
- [x] Set lucide hamburger for menu icon
- [x] Gate application menu to only show on Linux and Windows
Release Notes:
- Added a 'selection and movement' tool to the Editor's toolbar, as well
as controls to toggle it and a setting to remove it (`"toolbar":
{"selections_menu": true/false }`)
- Changed the behavior of the `+` menu in the tab bar to use standard
actions and keybindings. Replaced 'New Center Terminal' with 'New
Terminal', and 'New Search', with the usual 'Deploy Search'. Also added
item-creating actions to this menu.
- Added an 'application' menu to the titlebar to Linux and Windows
builds of Zed
Release Notes:
- Now when an editor loses focus (e.g. from switching tabs) and then
gains focus again, it doesn't close the inline assist. Instead, it only
closes when you move the cursor outside of it, e.g. by clicking
somewhere else in its parent editor.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR fixes an issue where the `zed-extension` CLI could no longer be
run as a static binary due to the following error:
```
dyld[36964]: Library not loaded: @rpath/WebRTC.framework/WebRTC
Referenced from: <56332E1D-292E-3F9B-97B9-8A9962D21599> /Users/maxdeviant/projects/zed-extensions/zed-extension
Reason: no LC_RPATH's found
fish: Job 1, './zed-extension --scratch-dir .…' terminated by signal SIGABRT (Abort)
```
This is the result of the addition of a dependency on `workspace` to the
`extension` crate (and thus, the `extension_cli` crate) in #12360.
Since we don't actually _need_ WebRTC in the extension CLI, we don't
care about dynamically linking it.
To resolve this, a new `no-webrtc` feature has been added to the
`live_kit_client` client crate and threaded through all of the crates
between it and the `extension_cli`.
Enabling the `no-webrtc` feature will prevent linking to the LiveKit
Swift SDK as well as linking the WebRTC framework.
Release Notes:
- N/A
On most platforms, things were working correctly, but had the wrong
type. On X11, there were some problems with window and display size
calculations.
Release Notes:
- Fixed issues with window positioning on X11
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Mikayla <mikayla@zed.dev>
TODO:
- [x] Finish GPUI changes on other operating systems
This is a largely internal change to how we report data to our
diagnostics and telemetry. This PR also includes an update to our blade
backend which allows us to report errors in a more useful way when
failing to initialize blade.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Fixes https://github.com/zed-industries/zed/issues/10890
* removes `unwrap()` that caused panics for text elements with no text,
remaining after edit state is cleared but project entries are not
updated, having the fake, "new entry"
* improves discoverability of the FS errors during file/directory
creation: now those are shown as workspace notifications
* stops printing anyhow backtraces in workspace notifications, printing
the more readable chain of contexts instead
* better indicates when new entries are created as excluded ones
Release Notes:
- Improve excluded entry creation workflow in the project panel
([10890](https://github.com/zed-industries/zed/issues/10890))
When running the tests for linux, I found a lot of benign errors getting
logged. This PR cuts down some of the noise from unnecessary workspace
serialization and SVG renders
Release Notes:
- N/A
This PR changes the default value of the `calls.share_on_join` setting
from `true` to `false`.
Nathan mentioned that project sharing should be opt-in so that projects
aren't shared unless you intend for them to be.
Release Notes:
- Changed the default `calls.share_on_join` value to `false`.
Follow up to: https://github.com/zed-industries/zed/pull/10986
However, I have set this to have a default behavior of 'auto': matching
the current platform's conventions, rather than a default value of
'off'.
fixes https://github.com/zed-industries/zed/issues/5322.
Release Notes:
- Changed the behavior of `workspace::CloseActiveItem`: when you're
using macOS and there are no open tabs, it now closes the window
([#5322](https://github.com/zed-industries/zed/issues/5322)). This can
be controlled with a new setting, `when_closing_with_no_tabs`, to
disable it on macOS, or enable it on other platforms.
<img width="1637" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/5aaec657-3499-42c9-9528-c83728f2a7a1">
Release Notes:
- Added a new ambient context feature that allows showing the model up
to three buffers (along with their diagnostics) that the user interacted
with recently.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Implemented autosave functionality with a delay, which now refrains from
formatting the code upon triggering unless the user manually saves it.
Additionally, enhanced documentation for the `format_on_save` setting
has been added. This resolves the issue where autosave with delay would
inadvertently format the code, disrupting the user experience, as
reported in the corresponding issue.
Release Notes:
- Fixed a bug where autosave after_delay would auto-format the buffer
([#9787](https://github.com/zed-industries/zed/issues/9787)).
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This is my stab at #7709
I realize the code is flawed. There's no test coverage, I'm using
`clone()` and there are probably better ways to hook into the events.
Also, I didn't know what context to use for the keybinding. But maybe
with some pointers from someone who actually know what they're doing, I
can get this shippable.
Release Notes:
- vim: Added ctrl-6 for
[alternate-file](https://vimhelp.org/editing.txt.html#CTRL-%5E) to
navigate back and forth between two buffers.
https://github.com/zed-industries/zed/assets/261929/2d10494e-5668-4988-b7b4-417c922d6c61
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
While these would match how macOS handles this scenario, they crash on
Catalina, and require mouse clicks to interact.
cc @bennetbo
Release Notes:
- N/A
A minor thing I've spotted and decided to fix on the spot.
It was being cloned twice within the body of that function (one of which
was redundant even without this PR); now in most cases we go down from 2
clones to 0.
Release Notes:
- N/A
