Provide a current, broken state as an experimental way to browse
diagnostics.
The diagnostics are grouped by lines and reduced into a block that, in
case of multiple diagnostics per line, could be toggled back and forth
to show more diagnostics on the line.
Use `grouped_diagnostics::Deploy` to show the panel.
Issues remaining:
* panic on warnings toggle due to incorrect excerpt manipulation
* badly styled blocks
* no key bindings to navigate between blocks and toggle them
* overall odd usability gains for certain groups of people
Due to all above, the thing is feature-gated and not exposed to regular
people.
Release Notes:
- N/A
Release Notes:
- Added support for following into the assistant panel.
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Nathan <nathan@zed.dev>
This is a ~small~ pure refactor that's a step toward SSH remoting. I've
extracted the Project's buffer state management into a smaller, separate
struct called `BufferStore`, currently in the same crate. I did this as
a separate PR to reduce conflicts between main and `remoting-over-ssh`.
The idea is to make use of this struct (and other smaller structs that
make up `Project`) in a dedicated, simpler `HeadlessProject` type that
we will use in the SSH server to model the remote end of a project. With
this approach, as we develop the headless project, we can avoid adding
more conditional logic to `Project` itself (which is already very
complex), and actually make `Project` a bit smaller by extracting out
helper objects.
Release Notes:
- N/A
# Issue
When a user does something that changes the cursor shape, such as when
switching between vim modes, there may be an up to 500ms (cursor blink
interval) delay until the user receives feedback for their action. This
happens when the shape change happens during the invisible phase of a
blink - the user will not see the cursor shape change until the next
phase, which could be 500ms away.
# Solution
Cursor shape changes should disrupt blinking by forcing the cursor to be
shown, this results in immediate feedback for shape changes. This is in
line with the behavior of other editors I've tried.
Release Notes:
- Improved visual feedback when changing cursor shape
When I implemented #13701, I kinda messed up with the reversed
selections, thinking that their anchors are flipped, so I flipped them
again. This caused the reverse selections to always be cleared
Release Notes:
- Fix reverse selections always being cleared, even if the right click
was performed inside
For: #13417
This is a simple version, I'm not sure if we just need to limit this
feature to vim mode, or maybe in normal editor mode, which involves
other logic like the location of the setting
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
The biggest hurdle turned out to be use of `Arc<Language>` in maps, as
`clippy::mutable_key_type` started triggering on it (due to - I suppose
- internal mutability on `HighlightMap`?). I switched over to using
`LanguageId` as the key type in some of the callsites, as that's what
`Language` uses anyways for it's hash/eq, though I've still had to
suppress the lint outside of language crate.
/cc @maxdeviant , le clippy guru.
Release Notes:
- N/A
For now extensions can only register global snippets, but there'll be
follow-up work to support scope attribute in snippets.json.
Release Notes:
- Extensions can now provide snippets by including `snippets.json` file
next to the extension manifest.
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR adds margin style methods to the `Label` and `LabelLike`
components.
This allows for callers to provide a margin to these components without
needing to introduce a wrapping `div` to do so.
Release Notes:
- N/A
The problem seemingly was that scrolling only started after autoscroll
has finished. I have added a function to forcefully stop it, which I
call when scroll event happens
Release Notes:
- Fixed delay when changing scrolling direction (#13720)
---------
Co-authored-by: Piotr <piotr@zed.dev>
Release Notes:
- Move snippet support into core editor experience, marking the official
extension as deprecated. Snippets now show up in any buffer (including
plain text buffers).
Sets up the `cmd-enter` keybinding for the jupyter repl to only apply
when enabled.
Release Notes:
- N/A
---------
Co-authored-by: Kirill <kirill@zed.dev>
Initial runtimes UI panel. The main draw here is that all message
subscription occurs with two background tasks that run for the life of
the kernel. Follow on to #12062
* [x] Disable previous cmd-enter behavior only if runtimes are enabled
in settings
* [x] Only show the runtimes panel if it is enabled via settings
* [x] Create clean UI for the current sessions
### Running Kernels UI
<img width="205" alt="image"
src="https://github.com/zed-industries/zed/assets/836375/814ae79b-0807-4e23-bc95-77ce64f9d732">
* [x] List running kernels
* [x] Implement shutdown
* [x] Delete connection file on `drop` of `RunningKernel`
* [x] Implement interrupt
#### Project-specific Kernel Settings
- [x] Modify JupyterSettings to include a `kernel_selections` field
(`HashMap<String, String>`).
- [x] Implement saving and loading of kernel selections to/from
`.zed/settings.json` (by default, rather than global settings?)
#### Kernel Selection Persistence
- [x] Save the selected kernel for each language when the user makes a
choice.
- [x] Load these selections when the RuntimePanel is initialized.
#### Use Selected Kernels
- [x] Modify kernel launch to use the selected kernel for the detected
language.
- [x] Fallback to default behavior if no selection is made.
### Empty states
- [x] Create helpful UI for when the user has 0 kernels they can launch
and/or 0 kernels running
<img width="694" alt="image"
src="https://github.com/zed-industries/zed/assets/836375/d6a75939-e4e4-40fb-80fe-014da041cc3c">
## Future work
### Kernel Discovery
- Improve the kernel discovery process to handle various installation
methods (system, virtualenv, poetry, etc.).
- Create a way to refresh the available kernels on demand
### Documentation:
- Update documentation to explain how users can configure kernels for
their projects.
- Provide examples of .zed/settings.json configurations for kernel
selection.
### Kernel Selection UI
- Implement a new section in the RuntimePanel to display available
kernels.
- Group on the language name from the kernel specification
- Create a dropdown for each language group to select the default
kernel.
Release Notes:
- N/A
---------
Co-authored-by: Kirill <kirill@zed.dev>
Context:
@bennetbo spotted a regression in handling of `cargo run` task in zed
repo following a merge of #13658. We've started invoking `cargo run`
from the folder of an active file whereas previously we did it from the
workspace root. We brainstormed few solutions that involved adding a
separate task that gets invoked at a workspace level, but I realized
that a cleaner solution may be to finally add user-configured task
variables. This way, we can choose which crate to run by default at a
workspace level.
This has been originally brought up in the context of javascript tasks
in
https://github.com/zed-industries/zed/pull/12118#issuecomment-2129232114
Note that this is intended for internal use only for the time being.
/cc @RemcoSmitsDev we should be unblocked on having runner-dependant
tasks now.
Release notes:
- N/A
This is just tests to verify [the fix for PageUp/PageDown in the
completions list](6e1b99b039) that was
previously added works properly. @SomeoneToIgnore Please check when you
have a moment. Thanks
Release Notes:
- N/A
Previously replace_all amounted to what could be achieved by repeatedly
mashing "Replace" button, which had a bunch of overhead related to
buffer state syncing. This commit gets rid of the automated button
mashing, processing all of the replacements in one go.
Fixes#13455
Release Notes:
- Improved performance of "replace all" in buffer search and project
search
The PageUp key was not working for the context menu. Instead of
selecting one of the previous items in the context menu, `MovePageUp`
closed the menu and scrolled the editor. `MovePageDown` was working
correctly because it has the same fix.
Release Notes:
- Fixed `pageup` key, when bound to `editor::MovePageUp`, not moving context menus as other keys
Add a single-line text input example to gpui
(I'm hoping to be able to debug keyboard issues without rebuilding the
whole
app every time)
Release Notes:
- N/A
TODO:
- [x] Moving the cursor out of the title editor should unselect any
selected text
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Richard <richard@zed.dev>
I use this for a much faster workflow with inline assist when using fast
models.
Release Notes:
- Added "Select Enclosing Symbol" command based on tree-sitter outline.
Useful in combination with inline assist to rewrite a function.
Buffers carry several pieces of state besides their text: syntax tree,
diagnostics, git diff, and file data. Previously, the buffer maintained
a separate integer version number for each of these four pieces of
state, incrementing it every time that piece of state is updated. This
is used by MultiBuffers to detect when they need to update excerpts.
Previously, for a given buffer, these four version numbers were stored
on the buffer itself, on every snapshot of the buffer, in any
multi-buffer that referenced that buffer, **and** on snapshots of that
multi-buffer. But the only use for the version numbers was reduced down
to a single boolean predicate: whether or not the buffer's state has
changed.
In this PR, I've combined those 4 version numbers into one. I've called
it `non_text_state_update_count` because it tracks all state updates
outside of the text itself. This removes a bunch of unnecessary code,
and reduces the size of buffer snapshots and multi-buffer snapshots.
Release Notes:
- N/A
Previously we've placed cursor on the first line of the first excerpt in
the multibuffer, but alas,
https://x.com/fasterthanlime/status/1804883499809165473 happened (j/k,
this feedback is totally valid) and now we're gonna place it at the end
of the first reference. As a bonus, with the old configuration `editor:
select next` tripped over itself. Now it's possible (& feasible) to do a
"select next" in "find all references"; consecutive referenced ranges
will be selected.
Fixes#13419
Release Notes:
- Fixed a bug where "Find all references" editor had cursor placed on
the first line of the first excerpt in the multibuffer instead of having
it on the first reference.
Runnables can now be disabled with:
```
"gutter": {
"runnables": false
}
```
Fixes#13280
Release Notes:
- Added `gutter.runnables` setting that controls whether runnable
indicators are displayed in the gutter.
In the past, Zed used a single switch called `autoclose` to control both
`autoclose` and `auto_surround` functionalities:
+ `autoclose`: when input '(', append ')' automatically.
+ `auto_surround`: when select text and input '(', surround text with
'(' and ')' automatically.
This PR separates `auto_surround` from `autoclose` to support `<`.
Previously, if `autoclose` of `<` was set to `false`, `auto_surround`
couldn't be used. However, setting `autoclose` to `true` would affect
the default behavior of simple expression. For example, `a < b` would
become `a <> b`.
For more information, see #13187.
Fix#12898.
Release Notes:
- Added support for `auto_surround`
([#12898](https://github.com/zed-industries/zed/issues/12898)).
This adds two new actions to `editor`:
- `editor::SelectPageUp`
- `editor::SelectPageDown`
On Linux they're bound by default to `shift-pageup` and
`shift-pagedown`, which matches VS Code and JetBrains.
Release Notes:
- N/A
This changes the breadcrumb header from "untitled" to "Last 1000 lines
in <location of log file>".
Reason is that it's been incredibly frustrating not seeing the location
of the log file there and not seeing that it's actually a truncated
version of the logs.
This is one remedy for that.
Other options considered:
1. Opening the actual log file. Turns out that is huge. On Linux right
now it's 5 megabyte after 5 minutes.
2. Opening the file and adding it on the buffer. That is tricky and
weird, because you have to modify the underlying buffer and set the
file, after having to add it to the workspace and getting its entry,
etc.
3. Setting a `display_file_path` on Buffer. That would require also
adding it on `BufferSnapshot` and then threading that through so that it
gets returned by the multi-buffer and then in the editor. And ultimately
this here is a "view concern", so we thought we just add it as such.
So yes, not the best change possible, but it's not that invasive and
makes it clear that it's a view-only concern.
Release Notes:
- N/A
Co-authored-by: Kirill <kirill@zed.dev>
### TODO
- [x] Make sure keybinding shows up in pane + menu
- [x] Selection tool in the editor toolbar
- [x] Application Menu
- [x] Add more options to pane + menu
- Go to File...
- Go to Symbol in Project...
- [x] Add go items to the selection tool in the editor:
- Go to Symbol in Editor...
- Go to Line/Column...
- Next Problem
- Previous Problem
- [x] Fix a bug where modals opened from a context menu aren't focused
correclty
- [x] Determine if or what needs to be done with project actions:
- Difficulty is that these are exposed in the UI via clicking the
project name in the titlebar or by right clicking the root entry in the
project panel. But they require reading and are two clicks away. Is that
sufficient?
- Add Folder to Project
- Open a new project
- Open recent
- [x] Get a style pass
- [x] Implement style pass
- [x] Fix the wrong actions in the selection menu
- [x] Show selection tool toggle in the 'editor settings' thing
- [x] Put preferences section from the app menu onto the right hand user
menu
- [x] Add Project menu into app menu to replace 'preferences' section,
and put the rest of the actions there
- [ ] ~~Adopt `...` convention for opening a surface~~ uncertain what
this convention is.
- [x] Adopt link styling for webview actions
- [x] Set lucide hamburger for menu icon
- [x] Gate application menu to only show on Linux and Windows
Release Notes:
- Added a 'selection and movement' tool to the Editor's toolbar, as well
as controls to toggle it and a setting to remove it (`"toolbar":
{"selections_menu": true/false }`)
- Changed the behavior of the `+` menu in the tab bar to use standard
actions and keybindings. Replaced 'New Center Terminal' with 'New
Terminal', and 'New Search', with the usual 'Deploy Search'. Also added
item-creating actions to this menu.
- Added an 'application' menu to the titlebar to Linux and Windows
builds of Zed
Fixes https://github.com/zed-industries/zed/issues/12054
Replaces the `copypasta`/`smithay-clipboard` implementation with a new,
custom one
TODO list:
- [x] Cleanup code
- [x] Remove `smithay-clipboard`
- [x] Add more mime types to the supported list
Release Notes:
- Fixed drag and drop on Gnome
- Fixed clipboard paste on Hyprland
Release Notes:
- Added a more detailed message in place of the generic `checking...`
messages when Rust-analyzer is running.
- Added a rate limit for language server status messages, to reduce
noisiness of those updates.
- Added a `cancel language server work` action which will cancel
long-running language server tasks.
---------
Co-authored-by: Richard <richard@zed.dev>
This was a bug in https://github.com/zed-industries/zed/pull/12990, due
to the new focus restoration logic introduced with the editor.
With this pull request, the editor will only restore focus when a
descendant lost it. If the focus was lost by the editor itself, there's
no need to restore it and we can instead proceed with starting the
cursor blink.
Release Notes:
- N/A
Release Notes:
- Now when an editor loses focus (e.g. from switching tabs) and then
gains focus again, it doesn't close the inline assist. Instead, it only
closes when you move the cursor outside of it, e.g. by clicking
somewhere else in its parent editor.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Note:
- We have disabled all tests that rely on Postgres in the Linux CI. We
only really need to test these once, and as macOS is our team's primary
platform, we'll only enable them on macOS for local reproduction.
- We have disabled all tests that rely on the font metrics. We
standardized on Zed Mono in many fonts, but our CoreText Text System and
Cosmic Text System proved to be very different in effect. We should
revisit if we decide to standardize our text system across platforms
(e.g. using Harfbuzz everywhere)
- Extended the condition timeout significantly. Our CI machines are slow
enough that this is causing spurious errors in random tests.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This fixes a panic in the `SelectionsCollection::first_anchor` when
there was a pending mouse selection and no other selections. Until
recently, this method was only used in vim mode, but as of
53b0720d54,
it's also used in the normal `move_up` and `move_down` actions.
So until recently, the panic that this fixes could only happen in vim
mode.
Release Notes:
- Fixed a crash that could happen when using certain cursor-motion
bindings with a pending mouse selection.
This PR updates the spots where we render the fold indicators in editors
to use the `Disclosure` component instead of re-implementing similar UI.
This makes this UI more consistent across Zed.
Release Notes:
- N/A
On most platforms, things were working correctly, but had the wrong
type. On X11, there were some problems with window and display size
calculations.
Release Notes:
- Fixed issues with window positioning on X11
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Mikayla <mikayla@zed.dev>
TODO:
- [x] Finish GPUI changes on other operating systems
This is a largely internal change to how we report data to our
diagnostics and telemetry. This PR also includes an update to our blade
backend which allows us to report errors in a more useful way when
failing to initialize blade.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR adds support for [linked editing of
ranges](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_linkedEditingRange),
which in short means that editing one part of a file can now change
related parts in that same file. Think of automatically renaming
HTML/TSX closing tags when the opening one is changed.
TODO:
- [x] proto changes
- [x] Allow disabling linked editing ranges on a per language basis.
Fixes#4535
Release Notes:
- Added support for linked editing ranges LSP request. Editing opening
tags in HTML/TSX files (with vtsls) performs the same edit on the
closing tag as well (and vice versa). It can be turned off on a language-by-language basis with the following setting:
```
"languages": {
"HTML": {
"linked_edits": true
},
}
```
---------
Co-authored-by: Bennet <bennet@zed.dev>
On X11 I was unable to type ä ü and other umlauts in files with
autoclose enabled, because typing ä requires me to hit
- compose key
- `"`
- `a`
When the `"` was typed, Zed would insert a matching `"` because it had a
selection around the dead-key that was inserted by the compose key.
We ran into a similar issue in #7611, but in the case of the Brazilian
keyboard, the `"` is the compose key so we didn't trigger the matching
`"`, because we didn't have a selection yet.
What this does is it fixes the issue by making the
surround-selection-with-quotes-or-brackets also depend on the autoclose
settings, which is didn't do before. This is a breaking change for users
of a Brazilian keyboard layout in which `"` cannot be used to surround
an existing selection with quotes anymore.
That _might_ be a change that users notice, but I can't think of
scenario for that where the user wants, say, `"` to be NOT autoclosed,
but work with selections. (Example is Markdown, for which autoclose for
`"` is disabled. Do we want that but allow surrounding with quotes?)
So it fixes the issue and makes the behavior slightly more consistent,
in my eyes.
Release Notes:
- Changed the behavior of surrounding selections with brackets/quotes to
also depend on the auto-close settings of the language. This is a
breaking change for users of a Brazilian keyboard layout in which `"`
cannot be used to surround an existing selection with quotes anymore.
Before:
[Screencast from 2024-06-04
11-49-51.webm](https://github.com/zed-industries/zed/assets/1185253/6bf255b5-32e9-4ba7-8b46-1e49ace2ba7c)
After:
[Screencast from 2024-06-04
11-52-19.webm](https://github.com/zed-industries/zed/assets/1185253/3cd196fc-20ba-465f-bb54-e257f7f6d9f3)
This PR adds the `editor: toggle tab bar` action that hides / shows the
tab bar and updates the `tab_bar.show` setting in `settings.json`
accordingly.
First mentioned in
https://github.com/zed-industries/zed/pull/7356#issuecomment-2118445379.
Release Notes:
- Added the `editor: toggle tab bar` action.
Release Notes:
- Improved UX for the inline assistant. It will now automatically wrap
when the text gets too long, and you can insert newlines using
`shift-enter`.
Previously, we were:
- cancelling previous requests only after the latest one has completed
- always running the debounced documentation resolution to completion,
even when we had no need for it.
In this commit, we drop the ongoing completion requests as soon as the
new one is fired.
Fixes#5166
Release Notes:
- Improved performance and reliability of completions in large
Typescript projects
Co-authored-by: Bennet Bo <bennet@zed.dev>
Using the file system as a database seems like it's easy, but it's
actually a real pain. I'd like to use LMDB to store the prompts locally
so we have more control. We can always add an export option, but I want
the source of truth to be somewhere other than the file system.
So far, I have a PromptStore which is global to the application and can
be initialized on startup. Then there's a `PromptLibrary` which is
intended to be the root of a new kind of Zed window. I haven't actually
seen pixels yet, but I've sketched out the basics needed to create a new
prompt, save, etc.
Still lots to figure out but the foundations of being backed by a DB and
rendering in an independent window are in place.
/cc @iamnbutler @as-cii
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR disables indent guides by default for single line editors. Right
now indent guides show up in the project search editor (which is only a
single line)
<img width="715" alt="image"
src="https://github.com/zed-industries/zed/assets/53836821/0b61da71-6f64-424d-9612-6a34eac4686a">
Release Notes:
- Fixed an issue where indent guides would show up in a single line
editor (e.g. project search, buffer search)
Indent guides can be configured per language, meaning that in a multi
buffer we can get excerpts where indent guides should be
disabled/enabled/styled differently than other excerpts.
Imagine the following scenario, i have indent guides disabled in my
settings, but want to enable them for JS and Python. I also want to use
a different line width for python files. Something like this is now
supported:
<img width="445" alt="image"
src="https://github.com/zed-industries/zed/assets/53836821/0c91411c-145c-4210-a883-4c469d5cb828">
And the relevant settings for the example above:
```json
"indent_guides": {
"enabled": false
},
"languages": {
"JavaScript": {
"indent_guides": {
"enabled": true
}
},
"Python": {
"indent_guides": {
"enabled": true,
"line_width": 5
}
}
}
```
Release Notes:
- Respect language specific settings when showing indent guides in a
multibuffer
- Fixes an issue where indent guide specific settings were not
recognized when specified in local settings
Previously, each git `Repository` object was held inside of a mutex.
This was needed because libgit2's Repository object is (as one would
expect) not thread safe. But now, the two longest-running git operations
that Zed performs, (`status` and `blame`) do not use libgit2 - they
invoke the `git` executable. For these operations, it's not necessary to
hold a lock on the repository.
In this PR, I've moved our mutex usage so that it only wraps the libgit2
calls, not our `git` subprocess spawns. The main user-facing impact of
this is that the UI is much more responsive when initially opening a
project with a very large git repository (e.g. `chromium`, `webkit`,
`linux`).
Release Notes:
- Improved Zed's responsiveness when initially opening a project
containing a very large git repository.
When running the tests for linux, I found a lot of benign errors getting
logged. This PR cuts down some of the noise from unnecessary workspace
serialization and SVG renders
Release Notes:
- N/A
Release Notes:
- Fixed an issue where expanded hunks could be rendered at the wrong
position when zooming
- Fixed an issue where expanded hunks could be rendered at the wrong
position when toggling git blame
([#11941](https://github.com/zed-industries/zed/issues/11941))
- Confirming a completion now runs the command immediately
- Hitting `enter` on a line with a command now runs it
- The output of commands gets folded away and replaced with a custom
placeholder
- Eliminated ambient context
<img width="1588" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/b1927a45-52d6-4634-acc9-2ee539c1d89a">
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Release Notes:
- Improved expand excerpt indicators to allow unidirectional expansion.
Also added the `editor::ExpandExcerptsUp` and
`editor::ExpandExcerptsDown` actions, which can both take a `lines`
parameter. Also added a `expand_excerpt_lines` setting which controls
the default number of lines that the indicators and actions use.
---------
Co-authored-by: conrad <conrad@zed.dev>
In #12003 we found ourselves in need for precise region tracking in
which a given runnable has an effect in order to grab variables from it.
This PR makes it so that in task modal all task variables from queries
overlapping current cursor position.
However, in the process of working on that I've found that we cannot
always use a top-level capture to represent the full match range of
runnable (which has been my assumption up to this point). Tree-sitter
captures cannot capture sibling groups; we did just that in Rust
queries.
Thankfully, none of the extensions are affected as in them, a capture is
always attached to single node. This PR adds annotations to them
nonetheless; we'll be able to get rid of top-level captures in extension
runnables.scm once this PR is in stable version of Zed.
Release Notes:
- N/A
This pull request replaces the static `⋯` character we used to insert
when folding a range with a custom render function that return an
`AnyElement`. We plan to use this in the assistant, but for now this
should be behavior-preserving.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Builds on top of existing work from #2249, but here's a showcase:
https://github.com/zed-industries/zed/assets/53836821/4b346965-6654-496c-b379-75425d9b493f
TODO:
- [x] handle line wrapping
- [x] implement handling in multibuffer (crashes currently)
- [x] add configuration option
- [x] new theme properties? What colors to use?
- [x] Possibly support indents with different colors or background
colors
- [x] investigate edge cases (e.g. indent guides and folds continue on
empty lines even if the next indent is different)
- [x] add more tests (also test `find_active_indent_index`)
- [x] docs (will do in a follow up PR)
- [x] benchmark performance impact
Release Notes:
- Added indent guides
([#5373](https://github.com/zed-industries/zed/issues/5373))
---------
Co-authored-by: Nate Butler <1714999+iamnbutler@users.noreply.github.com>
Co-authored-by: Remco <djsmits12@gmail.com>
Tasks
* [x] remove old flaps and output when editing a slash command
* [x] the completing a command name that takes args, insert a space to
prepare for typing an arg
* [x] always trigger completions when typing in a slash command
* [x] don't show line numbers
* [x] implement `prompt` command
* [x] `current-file` command
* [x] state gets corrupted on `duplicate line up` on a slash command
* [x] exclude slash command source from completion request
Next steps:
* show output token count in flap trailer
* add `/project` command that matches project ambient context
* delete ambient context
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR changes the interface of ContextProvider, allowing it to inspect
*all* variables set so far during the process of building
`TaskVariables`. This makes it possible to capture e.g. an identifier in
tree-sitter query, process it and then export it as a task variable.
Notably, the list of variables includes captures prefixed with leading
underscore; they are removed after all calls to `build_context`, but it
makes it possible to capture something and then conditionally preserve
it (and perhaps modify it).
Release Notes:
- N/A
When you press `V` to go into visual-line mode in Vim,
`selections.line_mode` is true and the selection contains _lines_.
But `$ZED_SELECTED_TEXT` always contained just the cursor location or
any non-line-mode selection that was previously made.
Release Notes:
- Fixed `$ZED_SELECTED_TEXT` variable in Tasks ignoring whether
visual-line-mode in Vim was used.
This pull request introduces the ability to add flaps, custom foldable
regions whose first foldable line can be associated with:
- A toggle in the gutter
- A trailer showed at the end of the line, before the inline blame
information
https://github.com/zed-industries/zed/assets/482957/c53a9148-f31a-4743-af64-18afa73c404c
To achieve this, we changed `FoldMap::fold` to accept a piece of text to
display when the range is folded. We use this capability in flaps to
avoid displaying the ellipsis character.
We want to use this new API in the assistant to fold context while still
giving visual cues as to what that context is.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Max <max@zed.dev>
Fixes#5267
TODO:
- [x] Publish our fork of vscode-langservers-extracted on GH and wire
that through as a language server of choice for HTML extension.
- [x] Figure out how to prevent edits made by remote participants from
moving the cursor of a host.
Release Notes:
- Added support for autoclosing of HTML tags in local projects.
### Todo
* [x] tuck the new system prompt away somehow
* for now, we're treating it as built-in, and not editable. once we have
a way to fold away default prompts, let's make it a default prompt.
* [x] when applying edits, re-parse the edit from the latest content of
the assistant buffer (to allow for manual editing of edits)
* [x] automatically adjust the indentation of edits suggested by the
assistant
* [x] fix edit row highlights persisting even when assistant messages
with edits are deleted
* ~adjust the fuzzy search to allow for small errors in the old text,
using some string similarity routine~
We decided to defer the fuzzy searching thing to a separate PR, since
it's a little bit involved, and the current functionality works well
enough to be worth landing. A couple of notes on the fuzzy searching:
* sometimes the assistant accidentally omits line breaks from the text
that it wants to replace
* when the old text has hallucinations, the new text often contains the
same hallucinations. so we'll probably need to use a more fine-grained
editing strategy where we perform a character-wise diff of the old and
new text as reported by the assistant, and then adjust that diff so that
it can be applied to the actual buffer text
Release Notes:
- Added the ability to request edits to project files using the
assistant panel.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Nathan <nathan@zed.dev>
I'm not a huge fan of passing around a boolean all around the place, but
this will tame the events for now until we have a better solution.
Release Notes:
- N/A
Previously, when highlighting editor rows with a color, we always
auto-scrolled to the first highlighted row. This was useful in contexts
like go-to-line and the outline view. We had an explicit special case
for git diff highlights. Now, part of the `highlight_rows` API, you
specify whether or not you want the autoscroll behavior. This is needed
because we want to highlight rows in the assistant panel, and we don't
want the autoscroll.
Release Notes:
- N/A
Data migration plan:
- [X] Make a duplicate table of `copilot_events`
- Name: `inline_completion_events`
- Omit `suggestion_id` column
- [X-reverted-skipping] In collab, continue to match on copilot_events,
but simply stuff their data into inline_completion_events, to forward it
to the new table
- [skipping] Once collab is deployed, ensure no events are being sent to
copilot_events, migrate `copilot_events` to new table via a transaction
- [skipping] Delete `copilot_events` table
---
- [X] Locally test that copilot events sent from old clients get put
into inline_completions_table
- [X] Locally test that copilot events and supermaven events sent from
new clients get put into inline_completions_table
---
- [X] Why are discard events being spammed?
- A:
8d4315712b/crates/editor/src/editor.rs (L2147)
This will throw off the past results for accepted / dismissed that I was
wanting to use to evaluate Supermaven quality, by comparing its rate
with copilot's rate.
I'm not super thrilled with this fix, but I think it'll do. In the
`supermaven_completions_provider`, we check if there's a `completion_id`
before sending either an accepted or discard completion event. I don't
see a similar construct in the `copilot_completions_provider` to
piggyback off of, so I begrudgingly introduced
`should_allow_event_to_send` and had it follow the same pattern that
`completion_id` does. Maybe there's a better way?
---
Adds events to supermaven suggestions. Makes "CopilotEvents" generic ->
"InlineCompletionEvents".
Release Notes:
- N/A
Hi, I saw someone on Twitter mentioned that missing Cut, Copy and Paste
actions in the context menu in the editor block them from using Zed. It
turns out that resolving this issue is simply a matter of adding these
actions to the mouse context menu. To keep items in the context menu
grouped, I placed them at the top of the menu with a separator at the
end. Let me know if that's OK. Thanks!
Here is the screenshot:
Release Notes:
- Added "Cut", "Copy", and "Paste" actions to the context menu
([#4280](https://github.com/zed-industries/zed/issues/4280)).
Closes https://github.com/zed-industries/zed/issues/11517
* Removes forced prettier parser name for languages, making `auto`
command to run prettier on every file by default.
* Moves prettier configs away from plugin language declarations into
language settings
Release Notes:
- N/A
Fixes a bug where Vim bindings would flash in the mouse context menu and
then be replaced by the default keybindings. Also fixes those bindings
not being usable while the mouse context menu was open.
Release Notes:
- Fixed bug where Vim bindings were not available when mouse context
menu was open
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This fixes#10185 by not keeping snippet state around when already at
the end of the snippet and the tabstop is empty (i.e. it's not a
selection) and we're already on it.
The reason for the fix is outlined in the comments of #10185 but to
repeat:
1. `gopls` sends completions with type "snippet" even when suggesting
single word completions that don't contain tabstops
2. We use a default behavior and add an "end tabstop" by default so that
the cursor jumps to the end of the snippet when accepting it.
3. We'd then push the state of the snippet on the stack which is where
it would stay, with the cursor already at the end and the user unable to
get rid of the tabstop state.
This fixes the issue by not pushing snippet state when the tabstop we
accepted is the "end tabstop".
Release Notes:
- Fixed completions inside snippets breaking the jump-to-next-tabstop
behaviour when using Go/`gopls`
([#10185](https://github.com/zed-industries/zed/issues/10185)).
Demo:
https://github.com/zed-industries/zed/assets/1185253/35384e5e-45c6-46ab-870d-b48e56d8786b
This adds a new option to the right click menu for git blame entries in
the gutter: "Open permalink". If there is a URL for the code host, then
this will open it.
Release Notes:
- Added "Open permalink" option to right-click menu of git blame entries
in gutter.
Demo:
This PR adds an extra scrollbar-wide margin to the right side of the
editor. This prevents hiding the last character under the scrollbar.
Fixes#7098
Release Notes:
- Fixed hiding of the last character under the scrollbar (#7098).
This cleans up the neovim-backed vim tests:
- removed exempted tests (we'll rely on bug reports to find missing edge
cases)
- moved all assertions into non-async fn's so that failures are
reporting on the right file/line
- removed the NeovimBackedBindingTestContext
- renamed a few things to make them clearer
- reduced the number of permutations tested in some cases to reduce
slowest test from 60s to 5s
Release Notes:
- N/A
While looking into how to implement #4901, noticed that the current
`Goto next/previous diagnostic` behaved a bit weirdly. That is, when
there are multiple errors that have overlapping ranges, only the first
one can be chosen to be active by the `go_to_diagnostic_impl`.
### Previous behavior:
https://github.com/zed-industries/zed/assets/71292737/95897675-f5ee-40e5-869f-0a40066eb8e3
Doesn't go through all the diagnostics, and going backwards and forwards
doesn't show the same diagnostic always.
### New behavior:
https://github.com/zed-industries/zed/assets/71292737/81f7945a-7ad8-4a34-b286-cc2799b10500
Should always go through the diagnostics in a consistent manner.
Release Notes:
* Improved the behavioral consistency of "Go to Next/Previous
Diagnostic"
Part of https://github.com/zed-industries/zed/issues/8081
To avoid confusion and bugs when converting between various row `u32`'s,
use different types for each.
Further PRs should split `Point` into buffer and multi buffer variants
and make the code more readable.
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Release Notes:
- vim: Added support for the changelist. `g;` and `g,` to the
previous/next change
- vim: Added support for the `'.` mark
- vim: Added support for `gi` to resume the previous insert
From now on, only top-level captures are treated as runnable tags and
the rest is appended to task context as custom environmental variables
(unless the name is prefixed with _, in which case the capture is
ignored). This is most likely gonna help with Pest-like test runners.
Release Notes:
- N/A
---------
Co-authored-by: Remco <djsmits12@gmail.com>
There're two errors in scrollbar markers in the presence of folded code:
1. Some markers are not displayed (when the marked row numbers are
greater than the total displayed rows count after folding).
2. Code folding / unfolding doesn't trigger markers repainting.
This PR fixes both problems.
Release Notes:
- Fixed scrollbar markers for folded code.
The second problem (markers are repainted after I move the cursor, not
after folding):
https://github.com/zed-industries/zed/assets/2101250/57ed563d-186d-4497-98ab-d4f946416726
A minor thing I've spotted and decided to fix on the spot.
It was being cloned twice within the body of that function (one of which
was redundant even without this PR); now in most cases we go down from 2
clones to 0.
Release Notes:
- N/A
Now, regardless of how the Zed window is closed, Zed can remember the
window's restore size.
- [x] Windows implementation
- [x] macOS implementation
- [x] Linux implementation (partial)
- [x] update SQL data base (mark column `fullscreen` as deprecated)
The current implementation on Linux is basic, and I'm not sure if it's
correct.
The variable `fullscreen` in SQL can be removed, but I'm unsure how to
do it.
edit: mark `fullscreen` as deprecated
### Case 1
When the window is closed as maximized, reopening it will open in the
maximized state, and returning from maximized state will restore the
position and size it had when it was maximized.
https://github.com/zed-industries/zed/assets/14981363/7207752e-878a-4d43-93a7-41ad1fdb3a06
### Case 2
When the window is closed as fullscreen, reopening it will open in
fullscreen mode, and toggling fullscreen will restore the position and
size it had when it entered fullscreen (note that the fullscreen
application was not recorded in the video, showing a black screen, but
it had actually entered fullscreen mode).
https://github.com/zed-industries/zed/assets/14981363/ea5aa70d-b296-462a-afb3-4c3372883ea3
### What's more
- As English is not my native language, some variable and struct names
may need to be modified to match their actual meaning.
- I am not familiar with the APIs related to macOS and Linux, so
implementation for these two platforms has not been done for now.
- Any suggestions and ideas are welcome.
Release Notes:
- N/A
Fixes#11422 by accepting just the start of the line.
Release Notes:
- N/A
---------
Co-authored-by: max <max@zed.dev>
Co-authored-by: jacob <jacob@supermaven.com>
This PR increases the length of a shortened Git SHA from 6 to 7
characters.
This matches what GitHub uses.
I also took the opportunity to factor out a common method for computing
a short SHA so that we have a single source of truth for the length that
we're using.
Release Notes:
- Increased the short commit SHA length used by git blame from 6 to 7
characters.
Originally reported by @mrnugget and @bennetbo
Also, instead of requerying them every frame, we do so whenever buffer
changes.
As a bonus, I modified tree-sitter query for Rust tests.
Release Notes:
- N/A
This PR adds a registry for `GitHostingProvider`s.
The intent here is to help decouple these provider-specific concerns
from the lower-level `git` crate.
Similar to languages, the Git hosting providers live in the new
`git_hosting_providers` crate.
This work also lays the foundation for if we wanted to allow defining a
`GitHostingProvider` from within an extension. This could be useful if
we wanted to extend the support to work with self-hosted Git providers
(like GitHub Enterprise).
I also took the opportunity to move some of the provider-specific code
out of the `util` crate, since it had leaked into there.
Release Notes:
- N/A
This PR refactors the code pertaining to Git hosting providers to make
it more uniform and easy to add support for new providers.
There is now a `GitHostingProvider` trait that contains the
functionality specific to an individual Git hosting provider. Each
provider we support has an implementation of this trait.
Release Notes:
- N/A
This PR makes the `border` methods require an explicit width instead of
defaulting to 1px.
This breaks convention with Tailwind, but it makes GPUI more consistent
with itself. We already have an edge case where the parameterized method
had to be named `border_width`, since `border` was taken up by an alias
for the 1px variant.
### Before
```rs
div()
.border()
.border_t()
.border_r()
.border_b()
.border_l()
.border_width(px(7.))
```
### After
```rs
div()
.border_1()
.border_t_1()
.border_r_1()
.border_b_1()
.border_l_1()
.border(px(7.))
```
Release Notes:
- N/A
The DisplayPoint returned from the position map is only valid at the
snapshot in the position map.
Before this change we were erroneously using it to index into the
current version of the buffer.
Release Notes:
- Fixed a panic caused by a race condition in hover.
We were retrieving task context incorrectly with a display point row as
the location argument, and not the actual row in the buffer.
Release Notes:
- N/A
Notable things I've had to fix due to 1.78:
- Better detection of unused items
- New clippy lint (`assigning_clones`) that points out places where assignment operations with clone rhs could be replaced with more performant `clone_into`
Release Notes:
- N/A
This fixes a tricky intermittent issue I was seeing, where failed to
chunk certain files correctly because of the way we reuse Tree-sitter
`Parser` instances across parses.
I've also accounted for leading comments in chunk boundaries, so that
items are grouped with their leading comments whenever possible when
chunking.
Finally, we've changed the `debug project index` action so that it opens
a simple debug view in a pane, instead of printing paths to the console.
This lets you click into a path and see how it was chunked.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Adds a supermaven provider for completions. There are various other
refactors amidst this branch, primarily to make copilot no longer a
dependency of project as well as show LSP Logs for global LSPs like
copilot properly.
This feature is not enabled by default. We're going to seek to refine it
in the coming weeks.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
* clear their selections on focus lost
* allow reverting diff hunks when the caret is inside of the deleted
hunk diff editor block
Release Notes:
- N/A
As an attempt to do things better when showing diff hunks, store diff
base as Rope, not String, to have cheaper clones when the diff base text
is reused, e.g. creating another buffer with the diff base text for hunk
diff expanding.
Release Notes:
- N/A
Release Notes:
- Fixed#10888
This patch addresses behavior of
`Editor::move_to_{beginning|end}_of_line`. It adds a setting,
`stop_at_soft_wraps` when defining a keymap for the
`editor::MoveToBeginningOfLine` and `editor::MoveToEndOfLine` actions.
When `true`, it causes movement to the either end of the line (via, for
example Home or End), to go to the logical end, as opposed to the
nearest soft wrap point in the respective direction.
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
This allows function call (i.e. snippet) completion with
`typescript-language-server`. So far that didn't work, because
`typescript-language-server` doesn't respond with `insertText` when
getting the completions, but only when then sending
`completionItem/resolve` requests. See:
https://github.com/hrsh7th/nvim-cmp/issues/646#issuecomment-992765479
What this PR does is to support text edits in the response to
`completionItem/resolve`, which means updating the completion item.
It then enables this feature by default for
`typescript-language-server`.
TODOs:
- [x] Make this work over collab
- [x] Test that this doesn't break existing language server support
- [x] Refactor duplicated code
Release Notes:
- Added support for function call completion when using
`typescript-language-server`. This will result in parameters being
added, which can then be changed and navigated with `<tab>`. For this to
work with `typescript-language-server`, the documentation for a given
completion item needs to be resolved, meaning that if one types very
quickly and accepts completion before `typescript-language-server` could
respond with the documentation, no full function completion is used.
Demo:
https://github.com/zed-industries/zed/assets/1185253/c23ebe12-5902-4b50-888c-d9b8cd32965d
I was experiencing hang, and we blamed it on spawning a few hundred git
processes
simultaneously.
cc @MrNugget
Release Notes:
- Fixed slowness with hundreds of buffers open doing git blame.
Part of https://github.com/zed-industries/zed/issues/4523
Added two new actions with the default keybindings
```
"cmd-'": "editor::ToggleHunkDiff",
"cmd-\"": "editor::ExpandAllHunkDiffs",
```
that allow to browse git hunk diffs in Zed:
https://github.com/zed-industries/zed/assets/2690773/9a8a7d10-ed06-4960-b4ee-fe28fc5c4768
The hunks are dynamic and alter on user folds and modifications, or
toggle hidden, if the modifications were not adjacent to the expanded
hunk.
Release Notes:
- Added `editor::ToggleHunkDiff` (`cmd-'`) and
`editor::ExpandAllHunkDiffs` (`cmd-"`) actions to browse git hunk diffs
in Zed
This PR fixes scrollbar auto-show feature when there're not visible
cursors. The intial behavior was broken in #11147.
The problem is that `selections` only contains visible selections, so
the `if` with `non_visible_cursors |= true` is only visited in rare edge
cases when we have at least part of the selection still visible on the
screen. But when we scroll far enough from the cursor,
`non_visible_cursors` keeps its default `false` value, which is
incorrect.
Release Notes:
- N/A
Release Notes:
- Added support for line ranges in vim replace commands #9428
- not supporting anything other than bare line numbers right now
- ~need to figure out how to show range in question in search bar~
@ConradIrwin implemented showing a highlight of the selected range for a
short direction instead
- ~tests lol~
This PR adds support for replacing the current preview tab when using
GoToDefinition. Previously a tab, that was navigated away from, was
converted into a permanent tab and the new tab was opened as preview.
Without `enable_preview_from_code_navigation`:
https://github.com/zed-industries/zed/assets/53836821/99840724-d6ff-4738-a9c4-ee71a0001634
With `enable_preview_from_code_navigation`:
https://github.com/zed-industries/zed/assets/53836821/8c60efcb-d597-40bf-b08b-13faf5a289b6
Note: In the future I would like to improve support for the navigation
history, because right now tabs that are not "normal" project items,
e.g. FindAllReferences cannot be reopened
Release Notes:
- Added support for replacing the current preview tab when using code
navigation (`enable_preview_from_code_navigation`)
We're planning to associate "selection sources" with global element ids
to allow arbitrary UI text to be selected in GPUI. Previously, global
ids were not exposed outside the framework and we entangled management
of the element id stack with element state access. This was more
acceptable when element state was the only place we used global element
ids, but now that we're planning to use them more places, it makes sense
to deal with element identity as a first-class part of the element
system. We now ensure that the stack of element ids which forms the
current global element id is correctly managed in every phase of element
layout and paint and make the global id available to each element
method. In a subsequent PR, we'll use the global element id as part of
implementing arbitrary selection for UI text.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
How it looks:
https://github.com/zed-industries/zed/assets/2101250/f564111c-1019-4442-b8a6-de338e12b12e
This PR adds cursor markers to the scrollbar. They work similar to
VSCode:
1. A cursor marker takes the whole scrollbar width.
2. It's always 2px high.
3. It uses the player's `cursor` color, so it may be helpful in the
collaboration mode.
There's a setting to switch cursor markers on/off:
```json
{
"scrollbar": {
"cursors": true
}
}
```
Implementation details:
- Unlike other markers, cursor markers are displayed synchronously.
Otherwise they don't feel smooth and sometimes freez on prolonged
up/down navigation.
- Cursor markers are automatically switched off when it's more than 100
of them.
- The minimum (non-cursor) marker height is now 5px. It allows the user
to see other markers under the cursor marker.
- The way the minimum height is imposed on markers has changed a bit to
keep consistency between markers of different types.
- Selected symbol markers use less vibrant color (`info` faded out a
little).
Release Notes:
- Added displaying of cursor markers in the scrollbar. They can be
switched on/off by the `scrollbar.cursors` setting.
Still TODO:
* Disable the new save-as for local projects
* Wire up sending the new path to the remote server
Release Notes:
- Added the ability to "Save-as" in remote projects
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
Fixed the cursor selection being offset, the hollow cursor was being
displayed fine when not having text selected that's why it might not
have been noticed at first.
Release Notes:
- N/A
Improved:
0d6fb08b67
Exclude go-to-definition links returned by LSP that points to the
current cursor position. This fixes#10392 . Related PR #9243 .
The previous implementation first performs go-to-definition, and if the
selected text covers the clicked position, it figures out that it is
already clicking on a definition, and should instead look for
references.
However, the selected range does not necessarily cover the clicked
position after clicking on a definition, as in VIM mode.
After the PR, if cmd+click on definitions, the definition links would be
an empty list, so no go-to-definition is performed, and
find-all-references is performed instead.
Release Notes:
- Fixed#10392 , now `cmd+click`ing to find all references works in vim
mode.
This was introduced with #10979 and was caused by a missing call to
`cx.set_view_id` in `EditorElement`, which is necessary when rendering
`EditorElement` manually instead of via a view.
Release Notes:
- N/A
The new `ElementContext` was originally introduced to ensure the element
APIs could only be used inside of elements. Unfortunately, there were
many places where some of those APIs needed to be used, so
`WindowContext::with_element_context` was introduced, which defeated the
original safety purposes of having a specific context for elements.
This pull request merges `ElementContext` into `WindowContext` and adds
(debug) runtime checks to APIs that can only be used during certain
phases of element drawing.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
This is a crate only addition of a new version of the AssistantPanel.
We'll be putting this behind a feature flag while we iron out the new
experience.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Co-authored-by: Nate Butler <nate@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Max <max@zed.dev>
Release Notes:
- Made remote projects per-user instead of per-channel. If you'd like to
be part of the remote development alpha, please email hi@zed.dev.
---------
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Co-authored-by: Bennet <bennetbo@gmx.de>
Co-authored-by: Nate Butler <1714999+iamnbutler@users.noreply.github.com>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
This pull request introduces the new
`ElementContext::request_autoscroll(bounds)` and
`ElementContext::take_autoscroll()` methods in GPUI. These new APIs
enable container elements such as `List` to change their scroll position
if one of their children requested an autoscroll. We plan to use this in
the revamped assistant.
As a drive-by, we also:
- Renamed `Element::before_layout` to `Element::request_layout`
- Renamed `Element::after_layout` to `Element::prepaint`
- Introduced a new `List::splice_focusable` method to splice focusable
elements into the list, which enables rendering offscreen elements that
are focused.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
This PR includes two relevant changes:
- Platform binds (super, windows, cmd) will now parse on all platforms,
regardless of which one is being used. While very counter-intuitive
(this means that `cmd-d` will actually be triggered by `win-d` on
windows) this makes it possible to reuse keymap files across platforms
easily
- There is now a KeyContext `os == linux`, `os == macos` or `os ==
windows` available in keymaps. This allows users to specify certain
blocks of keybinds only for one OS, allowing you to minimize the amount
of keymappings that you have to re-configure for each platform.
Release Notes:
- Added `os` KeyContext, set to either `linux`, `macos` or `windows`
- Fixed keymap parsing errors when `cmd` was used on linux, `super` was
used on mac, etc.
This PR adds an action to expand the excerpts lines of context in a
multibuffer.
Release Notes:
- Added an `editor::ExpandExcerpts` action (bound to `shift-enter` by
default), which can expand the excerpt the cursor is currently in by 3
lines. You can customize the number of lines by rebinding this action
like so:
```json5
// In your keybindings array...
{
"context": "Editor && mode == full",
"bindings": {
"shift-enter": ["editor::ExpandExcerpts", { "lines": 5 }],
}
}
```
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Max <max@zed.dev>
Editor scrollbar has several issues that show up on large files:
- The thumb scrolls beyond the window.
- When dragged, the thumb goes out of sync with the mouse pointer.
- When the scrollbar trunk is clicked, the thumb jumps incorrectly.
https://github.com/zed-industries/zed/assets/2101250/320dba59-a526-4e68-99b3-1186271ba839
The reason is that the scrollbar now has two modes:
1. The "basic mode" for small files, when the thumb height correctly
represents the visible area, i.e. the top of the thumb matches the top
visible row (let's call it top-to-top sync), and the bottom of the thumb
matches the bottom visible row.
2. The "extended mode" for large files, when thumb becomes too small and
we have to impose minimal height to it. In this mode we have a vertical
offset of the first row position inside the scrollbar, we try to
position the thumb center-to-center with the editor.
...and the second mode is not implemented correctly. Also, mouse event
handlers ignore it. It is possible to fix this implementation, but I'm
not sure if it worth doing because it a) leads to some confusing cases
(for instance, in the extended mode the first row marker is not at the
top of the scrollbar), and b) differs from what all other editors do.
Here's a previous mentioning of this problem:
https://github.com/zed-industries/zed/pull/9080#pullrequestreview-1927465293
This PR changes the "extended mode", making it synchronize the thumb
top-to-top with the editor. It solves all the mentioned problems and
makes the scroll thumb work the same whay as in other editors.
But if you want to stick to the idea of the center-to-center sync for
large files, I can do that too.
Release Notes:
- Fixed scroll thumb behaviour.
Optionally, include screenshots / media showcasing your addition that
can be included in the release notes.
- N/A
This PR adds an editor controls menu to the tool bar. This menu will be
used to contain controls that toggle visual features in the editor, like
toggling inlay hints, showing git status or blame, hiding the gutter,
hiding or showing elements in the tool bar, etc.
For the moment, this consolidates the new Inline Git Blame toggle and
the old Inlay Hints toggle. In the future it will contain additional
controls.
Before:
After:
---
Release Notes:
- Added an editor controls menu to the tool bar. This will contain
visual, editor-specific options like toggling inlay hints, showing git
status or blame, etc.
- Removed the top level inlay hint toggle from the tool bar due to the
above change.
- Added the ability to toggle inline git blame from the new editor
controls menu.
---------
Co-authored-by: Marshall Bowers <1486634+maxdeviant@users.noreply.github.com>
Zed displays scrollbar markers of three types: git diffs, background
highlights and diagnostics. At the moment, the "background highlights"
markers are displayed for all the supported highlights:
- Occurences of the symbol under cursor.
- Search results.
- Scope boundaries (only works when a symbol is selected).
- Active hover popover position.
They all use the same color, which leads to confusing results. For
instance, in the following case I expect to see markers for the
`new_anchor` occurences in lines 43 and 47. But besides them, there're
also scope-markers for `ScrollAnchor` initialization block in lines 46
and 49, which makes me think that there're four places where
`new_anchor` appears.
<img width="740" alt="zed-scrollbar-markers"
src="https://github.com/zed-industries/zed/assets/2101250/78700e6b-fdd1-4c2f-beff-e564d8defc13">
Existing settings `selection` and `symbol_selection` in the `scrollbar`
section [don't work as
expected](https://github.com/zed-industries/zed/pull/10080#discussion_r1552325493),
which increases confusion.
This PR only leaves two types of bg-highlight-markers and provides
dedicated settings for them:
- Occurences of the symbol under cursor. Setting: `selected_symbol`,
default is `true`.
- Search results. Setting: `search_results`, default is `true`.
The `selection` and `symbol_selection` settings are not used anymore.
Release Notes:
- Breaking changes. Settings `selection` and `symbol_selection` in the
`scrollbar` section renamed to `search_results` and `selected_symbol`
respectively. Fixed the effect of these settings on which markers are
displayed on the scrollbar.
Optionally, include screenshots / media showcasing your addition that
can be included in the release notes.
- N/A
/cc @mrnugget
This moves the diagnostics and find all references to be in line with
the search pane. This also centralizes the constant into the editor code
base.
Release Notes:
- Increased diagnostic context to match the project search context.
Some people (like myself) use touchpads for development and I find Zed's
default scroll sensitivity to be slower than I like. This change adds a
scroll sensitivity multiplier that allows users to customize the speed
of their scrolling.
Release Notes:
- Added a setting under "scroll_sensitivity" that allows user to control
the scroll sensitivity. This value acts as a multiplier for the
horizontal and vertical scroll speed.
This adds so-called "inline git blame" to the editor that, when turned
on, shows `git blame` information about the current line inline:
When the inline information is hovered, a new tooltip appears that
contains more information on the current commit:
The commit message in this tooltip is rendered as Markdown, is
scrollable and clickable.
The tooltip is now also the tooltip used in the gutter:
## Settings
1. The inline git blame information can be turned on and off via
settings:
```json
{
"git": {
"inline_blame": {
"enabled": true
}
}
}
```
2. Optionally, a delay can be configured. When a delay is set, the
inline blame information will only show up `x milliseconds` after a
cursor movement:
```json
{
"git": {
"inline_blame": {
"enabled": true,
"delay_ms": 600
}
}
}
```
3. It can also be turned on/off for the current buffer with `editor:
toggle git blame inline`.
## To be done in follow-up PRs
- [ ] Add link to pull request in tooltip
- [ ] Add avatars of users if possible
## Release notes
Release Notes:
- Added inline `git blame` information the editor. It can be turned on
in the settings with `{"git": { "inline_blame": "on" } }` for every
buffer or, temporarily for the current buffer, with `editor: toggle git
blame inline`.
This introduces semantic indexing in Zed based on chunking text from
files in the developer's workspace and creating vector embeddings using
an embedding model. As part of this, we've created an embeddings
provider trait that allows us to work with OpenAI, a local Ollama model,
or a Zed hosted embedding.
The semantic index is built by breaking down text for known
(programming) languages into manageable chunks that are smaller than the
max token size. Each chunk is then fed to a language model to create a
high dimensional vector which is then normalized to a unit vector to
allow fast comparison with other vectors with a simple dot product.
Alongside the vector, we store the path of the file and the range within
the document where the vector was sourced from.
Zed will soon grok contextual similarity across different text snippets,
allowing for natural language search beyond keyword matching. This is
being put together both for human-based search as well as providing
results to Large Language Models to allow them to refine how they help
developers.
Remaining todo:
* [x] Change `provider` to `model` within the zed hosted embeddings
database (as its currently a combo of the provider and the model in one
name)
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio <antonio@zed.dev>
This reverts commit caed275fbf.
NOTE: this should not be merged until #9668 is on stable and the
`ZedVersion#can_collaborate` is updated to exclude all clients without
that change.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
`FindAllReferences` will now open a preview tab, jumping to a definition
will also open a preview tab.
https://github.com/zed-industries/zed/assets/53836821/fa3db1fd-ccb3-4559-b3d2-b1fe57f86481
Note: One thing I would like to improve here is also adding support for
reopening `FindAllReferences` using the navigation history. As of now
the navigation history is lacking support for reopening items other then
project files, which needs to be implemented first.
Release Notes:
- N/A
This introduces a new API on `StatefulInteractiveElement` to create a
tooltip that can be hovered, scrolled inside, and clicked:
`.hoverable_tooltip`.
Right now we only use it in the `git blame` gutter, but the plan is to
use the new hover/click/scroll behavior in #10398 to introduce new
git-blame-tooltips.
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
<img width="1035" alt="Screenshot 2024-04-11 at 13 13 44"
src="https://github.com/zed-industries/zed/assets/13402668/cd0e96a0-41c6-4757-8840-97d15a75c511">
Release Notes:
- Added a notification to show possible `git blame` errors if it fails to run.
Caveats:
- ~git blame now executes in foreground
executor (required since the Fut is !Send)~
TODOs:
- After a failed toggle, the app thinks the blame
is shown. This means toggling again will do nothing
instead of retrying. (Caused by editor.show_git_blame
being set to true before the git blame is generated)
- ~(Maybe) Trim error?~ Done
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
