The unique-prefixe tests are typically the slowest tests. Here's the
end of my `cargo nextest --workspace` output (from an arbitrary run,
not best-of-5 or anything):
PASS [ 5.129s] jujutsu::test_log_command test_log_prefix_highlight_brackets
PASS [ 5.220s] jujutsu::test_log_command test_log_prefix_highlight_styled
PASS [ 8.523s] jujutsu::test_log_command test_log_prefix_highlight_counts_hidden_commits
These tests create 50-100 commits in a loop. I think much of it comes
from the subprocessing and/or the repeated loading of the repository
in the subprocesses. Rewriting them to use `jj duplicate` for creating
many commits at once speeds them up. Here are the timings after:
PASS [ 2.323s] jujutsu::test_log_command test_log_prefix_highlight_styled
PASS [ 2.330s] jujutsu::test_log_command test_log_prefix_highlight_brackets
PASS [ 3.773s] jujutsu::test_log_command test_log_prefix_highlight_counts_hidden_commits
I felt that the config is too narrow to have it's own top-level [diff]
section, and I couldn't think of another good place to have it. I'm
happy to hear other suggestions.
This allows us to use "if(description,)" to test empty description. And
I think this change is unavoidable if we want to add support for commit
template.
I think of it more as style than a format, so using `style` in the
config key makes sense to me.
I didn't bother making upgrades easy by supporting the old name since
this was just released and only a few developers probably have it set.
I don't think need to write non-UTF8 bytes to our config files. If we
ever do (maybe to test that we give the user a reasonable error
message), we add a custom function for that.
This is ugly, but we need a special case because root_change_id and
root_commit_id aren't equal but share the same prefix bytes. In practice,
no one would care for the shortest root id prefix, but we'll need to deal
with a similar problem when migrating prefix id resolution to repo layer.
I think the intent of '- 1' here is the separator length, which was
originally ':'. Alternatively, we can ensure that prefix + remainder is
always 12 chars.
This creates a templater function `short_underscore_prefix` for commit and
change ids. It is similar to `short` function, but shows one fewer hexadecimal
digit and inserts an underscore after the shortest unique prefix.
Highlighting with an underline and perhaps color/bold will be in a follow-up
PR.
The implementation is quadratic, a simple comparison of each id with every
other id. It is replaced in a subsequent commit. The problem with it is that,
while it works fine for a `jj`-sized repo, it becomes is painfully slow with a
repo the size of git/git.
Still, this naive implemenation is included here since it's simple, and could
be used as a reference implementation.
The `shortest_unique_prefix_length` function goes into `repo.rs` since that's
convenient for follow-up commits in this PR to have nicer diffs.
There are several reasons for this:
* We can more easily skip styling a trailing blank line, which other
internal code then can correctly detect as having a trailing
newline. This fixes the TODO in tests/test_commit_template.rs.
* Some tools (like `less -R`) add an extra newline if the final
character is not a newline (e.g. if there's a color reset after
it), which led to an annoying blank line after the diff summary in
e.g. `jj status`.
* Since each line is styled independently, you get all the necessary
escapes even when grepping through the output.
* Some terminals extend background color to the end of the terminal
(i.e. past the newline character), which is probably not what the
user wanted.
* Some tools (like `less -R`) get confused and lose coloring of lines
after a newline.
We often end up writing escape codes for one style and then
immediately after, we write escape codes for another style. That seems
harmless, but it's a little ugly. More importantly, it prepares for
not emitting any escapes for turning off attributes at the end of
formatted contents across multiple lines (see next commit).
Let's use `crossterm` to make `ColorFormatter` a little more readable,
and maybe also more portable.
This uses the `SetForegroundColor()` function, which uses the escapes
for 256-color support (code 38) instead of the 8-color escapes (codes
30-37) combined with bold/bright (code 1) we were using before. IIUC,
most terminals support the 16 base colors when using the 256-color
escape even if they don't support all the 256 colors. It seems like an
improvement to use actual color codes for the bright colors too,
instead of assuming that terminals render bold as bright (even though
most terminals do).
Before this commit, we relied on ANSI escape 1 - which is specified to
make the font bold - to make the color brighter. That's why we call
the colors "bright blue" etc. When we switch from using code 30-37 to
using 38 to let our color config just control the color (not using
escape1), we therefore lose the bold font on many terminals (at least
in iTerm2 and in the terminal application on my Debian work
computer). As a workaround, I made us still use escape 1 when the
bright colors are used. I'll make boldness a separately configurable
attribute soon. Then we'll be able to remove this hack.
With the switch to `crossterm`, we also reset just the foreground
color (code 39) instead of resetting all attributes (code 0). That
also seems like an improvement, probably making it easier for us to
later support different background colors, underlining, etc.
An important part of the `jj log` output is the commit template. I
suspect we'll have many more tests for that, so let's move it to a
separate file. The main `test_log_command.rs` can focus on which
commits to display.
Since per-repo config may contain CLI settings, it must be visible to CLI.
Therefore, UserSettings::with_repo() -> RepoSettings isn't used, and its
implementation is nullified by this commit.
#616
This will be needed to test functionality for showing shortest
unique prefix for commit and change ids. As a bonus, this also
allows us to test log output with change ids.
As another bonus, this will prevent occasional CI failures like
https://github.com/martinvonz/jj/actions/runs/3817554687/jobs/6493881468.
"jj log -p --summary" now shows summary and color-words diff, like
"hg log -p --stat".
Handling of "-p" is tricky. I first considered "-p" would turn on the default
diff output, but I found it would be confusing if "jj log -p --git" showed
both color-words and git diffs. So the default format is inserted only if
no --git nor --color-words is explicitly specified.
I can't see any reason the user would want to specify revisions
matching the empty string, so let's disallow it. I created a custom
type for revision arguments instead of repeating `value_parser =
NonEmptyStringValueParser::new()`.
Let's acknowledge everyone's contributions by replacing "Google LLC"
in the copyright header by "The Jujutsu Authors". If I understand
correctly, it won't have any legal effect, but maybe it still helps
reduce concerns from contributors (though I haven't heard any
concerns).
Google employees can read about Google's policy at
go/releasing/contributions#copyright.
In the current implementation, tree is diffed twice if both PATH and -p
are specified. If this adds significant cost, we'll need to reimplement
it without using a revset abstraction (or maybe adjust revset/graph API.)
It can be confusing that some commits (typically the working copy)
don't have a description. Let's show a placeholder text in such cases.
I chose the format to match the "(no email configured)" message we
already have.
This adds a `--reversed` flag to `jj log` to show commits with later
commits further down. It works both with and without the graph.
Since the graph-drawing code is already independent of the
relationship between commits, it doesn't need any updating.
`log -s/--summary` and `log --git` without `-p` don't do anything. I
also don't think it's very useful to pass these flags in an alias,
where you would then sometimes also pass `-p` to see the diff summary
in the output. We already have the `diff.format` config for that use
case. So let's make both of these flags imply `-p`.
I implemented it by making the `diff_format` variable an
`Option<DiffFormat>`, which is set iff we should show a patch. That
way we have the condition in one place, and the places we use it
cannot forget to check it.
"log -p | less" is the option I often use with hg/git to find interesting
bits from the changelog, and I think it's also valid with jj. Unlike
"hg log -p --stat", "jj log -p --summary" does not show both diff summary
and patch to reflect the internal structure. This behavoir is arguable and
may be changed later.
The logic of show_patch() is extracted from cmd_show().
