The last hunk could be truncated instead, but the .peekable() version is easier
to follow. If we truncated lines, we would have to adjust line ranges
accordingly.
It's common to create empty working-copy commits while using jj, and
currently the author timestamp for a commit is only set when it is first
created. If you create an empty commit, then don't work on a repo for a
few days, and then start working on a new feature without abandoning the
working-copy commit, the author timestamp will remain as the time the
commit was created rather than being updated to the time that work began
or finished.
This commit changes the behavior so that discardable commits (empty
commits with no description) by the current user have their author
timestamps reset when they are rewritten, meaning that the author
timestamp will become finalized whenever a commit is given a description
or becomes non-empty.
While explaining branch tracking behavior, I find it's bad UX that a deleted
branch can be re-"create"d with tracking state preserved. It's rather a "set"
operation. Since deleted tracking branch is still listed, I think it's better
to assume that the local branch name is reserved.
https://github.com/martinvonz/jj/discussions/3871
Renaming to deleted tracking branch is still allowed (with warning) because the
"rename" command can't handle tracked remotes very well. If it were banned, bad
rename couldn't be reverted by using "jj branch rename". It would be confusing
if "rename a b" succeeded with warning, but the following "rename b a" failed.
We now have two `cmd_show` in the repo. I think this one should become
`cmd_file_show`, but this should be done uniformly over all the commands
for consistency.
I did *not* keep `print` as an alias (I couldn't find a compelling
reason to do it), but let me know if anyone feels like keeping it.
Since "set <thing>" often adds a <thing> if not exists, it make some sense
that "branch set" does upsert. The current "branch set" use case is now covered
by "branch move", so it's okay to change the "set" behavior.
If new branch is created by "branch set", status message and hint will be
printed to help migration. The user should be able to undo creation if it was
a mistake.
Closes#3584
There are several bugs in both the tests and in the implementation
that are made more clear by showing the log output before and after
running the command.
This allows users to jump to the next conflict in the ancestors or children of
the start commit.
Continues work on #2126
Co-Authored-By: Noah Mayr <dev@noahmayr.com>
In a repo of mine I wanted to do something like the following to push all of my
leaves to the remote as backup:
jj git push -c 'all:heads(base::) & mine() ~ empty()'
But couldn't, because `jj git push` doesn't handle large revsets, even though
it does handle multiple `-c` arguments, so I had to work out some pipe-to-xargs
command instead.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
The follow up diff will make `-c` accept large revsets, so it won't make any
sense to print out the original expression when multiple branches will be
created from it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
The error message that says something like 'Workspace "default"
doesn't have a working copy' confused me when I saw it. The problem
it's describing is that the repo view doesn't have a working-copy
commit for the given workspace id. Saying "working-copy commit"
instead of "working copy" hopefully clarifies it a bit.
This basically supersedes the current "branch set" command. The plan is to turn
"branch set" into an "upsert" command, and deprecate "branch create". (#3584)
Maybe we can also add "branch set --new" flag to only allow creation of new
branches. One reason behind this proposed change is that "set" usually allows
both "creation" and "update". However, we also need a typo-safe version of
"set" to not create new branches by accident.
"jj branch move" is useful when advancing ancestor branches. Let's say you've
added a couple of commits on top of an existing PR branch, you can advance the
branch by "jj branch move --from 'heads(::@- & branches())' --to @-". If this
pattern is super common, maybe we can add --advance flag for short.
One drawback of this change is that "git branch --move" is equivalent to
"jj branch rename". I personally don't find this is confusing, but it's true
that "move" sometimes means "rename".
Otherwise they wouldn't be sorted in help. I also reordered the match statement.
Since subcommands are split to per-file modules, there's no point to keep some
logical ordering.
If I can't tell what this comment means, probably nobody else can
either.
I think it might be a copy-paste error from whatever docs I copied the
initial version of the config from.
Still alias function shadows builtin function (of any arity) by name. This
allows to detect argument error as such, but might be a bit inconvenient if
user wants to overload heads() for example. If needed, maybe we can add some
config/revset syntax to import builtin function to alias namespace.
The functions table is keyed by name, not by (name, arity) pair. That's mainly
because std collections require keys to be Borrow, and a pair of borrowed
values is incompatible with owned pair. Another reason is it makes easy to look
up overloads by name.
Alias overloading could also be achieved by adding default parameters, but that
will complicate the implementation a bit more, and can't prevent shadowing of
0-ary immutable_heads().
Closes#2966
I'm going to add arity-based alias overloading, and we'll need function
(name, arity) pair to identify it in alias expansion stack. The exact parameter
names aren't necessary, but they can be embedded in error messages.
Most of the value of `jj fix` over a shell script is in formatting commits
other than `@`. `@::` often doesn't contain those other commits, so `-s @` is a
bad default.
We could get the same effect from `-s 'mutable() & ::@'`, but `reachable()` is
a bit more explicit and simple to read.
We could also base this on excluding `trunk()`, but that just seems like an
indirection for `mutable()` that might ignore the user's intent if they have
configured part of trunk to be mutable.
This addresses issue #3317, where as discussed we want to show the paths to
configuration files if they contain errors, to make it easier for the user to
locate them.
As we discovered in the `jj fix` tests,
`MergedTreeBuilder::write_tree()` doesn't try to resolve conflicts,
not even trivial ones. This patch fixes that.
The goal is to remove special case from parsing functions and provide slightly
better error message. I don't know if we'd want to use "all:" in aliases, but
there are no strong reasons to disable it.
This commit adds an optional flag to be able to push commits with an
empty description to a remote git repo. While the default behavior is
ideal we might need to interact with a repo that has an empty commit
description in it. I ran into this issue a few weeks ago pushing commits
from an open source repo to an empty repo and had to go back to using
git for that push as I would not want to rewrite the history which was
many many years long just for that.
This flag allows users an escape hatch for pushing empty descriptions
for commits and they're sure that they want that behavior.
This commit adds the flag to the `git push` command and updates the docs
for the command. It also updates the original test to make sure that the
flag works as intended to reject the commit when not set and to allow
the commit when the flag is set.
Closes#2633
This simplifies the interface of helper functions. While revset doesn't have
top-level string pattern or integer literal, these parsing helpers could be
used to parse array subscript or n-th parent operator if any.
Previously, it sounded like `jj git` might only include highly-technical
commands, while IMO the most important commands in here are `jj git
fetch` and `jj git push`.
This will allows us to parse "file(..)" arguments as fileset expression by
transforming AST for example. I'm not sure if that's good or bad, but we'll
probably want to embed fileset expressions without quoting.
parse_expression_rule() is split to the first str->ExpressionNode stage and
the second ExpressionNode->RevsetExpression stage. The latter is called
"resolve_*()" in fileset, but we have another "symbol" resolution stage in
revset. So I choose "lower_*()" instead.
Otherwise, newly created default branch would be re-imported as a new Git HEAD.
This could be addressed by cmd_git_init(), but the same situation can be
crafted by using "git checkout -b".
It's copied from test_git_colocated.rs, and switched to commit_id.short()
because full-length commit_id looked too verbose. "all()" history isn't needed,
but it's easier to follow.
Some backends, like the one we have at Google, can restrict access to
certain files. For such files, if they return a regular
`BackendError::ReadObject`, then that will terminate iteration in many
cases (e.g. when diffing or listing files). This patch adds a new
error variant for them to return instead, plus handling of such errors
in diff output and in the working copy.
In order to test the feature, I added a new commit backend that
returns the new `ReadAccessDenied` error when the caller tries to read
certain objects.
I'm going to add a similar message for access denied. That will want
an error message printed at the end. For consistency, let's do the
same for non-file paths.
I recently needed to test something on top of a two branches at the
same time, so I created a new commit on top of both of them (i.e. a
merge commit). I then ran tests and made some adjustments to the
code. These adjustments belonged in one of the parent branches, so I
used `jj squash --into` to squash it in there. Unfortunately, that
meant that my working copy became a single-parent commit based on one
of the branches only. We already had #2859 for tracking this issue.
This patch changes the behavior so we create a new working-copy commit
with all of the previous parents.
As explained in the commit, our logic is a bit more complicated than
that of `git push --force-with-lease`. This is to match the behavior of
`jj git fetch` and branch conflict resolution rules.
This tests `git push` attempting to create a branch when the branch
already unexpectedly exists on the remote. This should (and does)
fail.
Also changes another test to use `jj_cmd_failure`.
It's been about six months since we started using tree-level conflicts
by default. I can't imagine we would switch back. So let's continue
the migration by always using tree-level conflicts when merging trees,
even if all inputs were legacy trees.
Perhaps, the original intent was to abandon non-empty working-copy commit
assuming it was rewritten by git (therefore it should be superseded by the
current working-copy content.) However, there are other reasons that could
make the HEAD out of sync (including concurrent jj operations), and abandoning
non-empty commit can be a disaster. This patch turns it to safer side, and let
user abandon non-empty commit manually.
Fixes#3747
"config list NAME" argument is now parsed as TOML key, but it's still broken
since config.get() expects a query expression in different syntax.
The other config commands will be migrated later.
This revset correctly implements "reachability" from a set of source commits following both parent and child edges as far as they can go within a domain set. This type of 'bfs' query is currently impossible to express with existing revset functions.
This follows up on https://github.com/martinvonz/jj/pull/3459 and adds a
label to the closing delimeter of each conflict, e.g. "Conflict 1 of 3
ends".
I didn't initially put any label at the ending delimeter since the
starting delimeter is already marked with "Conflict 1 of 3". However,
I'm now realizing that when I resolve conflicts, I usually go from top
to bottom. The first thing I do is delete the starting conflict
delimeter. It is when I get to the *end* of the conflict that I wonder
whether there are any more conflicts left in the file.
This consolidates the type of substitution results. Before, symbol substitution
can return inner ExpressionKind internally, but function-parameter substitution
couldn't.
This should avoid regression caused by upcoming changes. An alias function
parameter will be wrapped with AliasExpanded, and type errors in it should
be reported with its alias expansion stack.
previously, aliases to built-in commands were silently ignored. this matches git's behavior, but seems unhelpful, especially if the user doesn't know that a command with that name already exists.
give a warning rather than silently ignoring it.
When using `ui.color = "debug"`, changes in the output style
additionally include delimiters << and >>, as well as all active labels
at this point separated by ::. The output is otherwise unformatted and
the delimiters and labels inherit the style of the content they apply
to.
Not all "branch list --all-remotes" callers are replaced because I'm going to
make get_branch_output() suppress hints by default, and there should be tests
for the hints.
This also means "all:" is allowed in default revsets (such as "revsets.log"),
but that seems okay. In revset aliases, "all:" isn't allowed because aliases
may be expanded to sub-expression position.
Closes#3654
Perhaps, this can be used to generate parsable branches list.
The hint for deleted branches isn't migrated to the template. I'm thinking of
moving it out of the loop and printed once at the end. If we want to generate
a hint in template, we'll probably need local_ref.tracking_remote_refs(), etc.
that return a list of RefNames.
More tests will be added later as "branch list" templates.
In "log" template, we might want to see the number of "local" commits ahead
of any tracked remotes. It can be implemented later in a similar way (or as a
nested remote_refs list.)
For example,
```
<<<<<<< Conflict 1 of 3
+++++++ Contents of side #1
left 3.1
left 3.2
left 3.3
%%%%%%% Changes from base to side #2
-line 3
+right 3.1
>>>>>>>
```
or
```
<<<<<<< Conflict 1 of 1
%%%%%%% Changes from base to side #1
-line 3
+right 3.1
+++++++ Contents of side #2
left 3.1
left 3.2
left 3.3
>>>>>>>
```
Currently, there is no way to disable these, this is TODO for a future
PR. Other TODOs for future PRs: make these labels configurable. After
that, we could support a `diff3/git`-like conflict format as well, in
principle.
Counting conflicts helps with knowing whether you fixed all the
conflicts while you are in the editor.
While labeling "side #1", etc, does not tell you the commit id or
description as requested in #1176, I still think it's an improvement.
Most importantly, I hope this will make `jj`'s conflict format less
scary-looking for new users.
I've used this for a bit, and I like it. Without the labels, I would see
that the two conflicts have a different order of conflict markers, but I
wouldn't be able to remember what that means. For longer diffs, it can
be tricky for me to quickly tell that it's a diff as opposed to one of
the sides. This also creates some hope of being able to navigate a
conflict with more than 2 sides.
Another not-so-secret goal for this is explained in
https://github.com/martinvonz/jj/pull/3109#issuecomment-2014140627. The
idea is a little weird, but I *think* it could be helpful, and I'd like
to experiment with it.
I considered adding RefTarget template type, but some of the methods naturally
fit to RefName. For example, a conflicted branch name is decorated as "??", so
it makes sense to add branch.conflict() instead of branch.target().conflict().
I'm not pretty sure how many RefName methods we'll need to add to port the
current branch listing, but there will be .tracked(), .tracking_local_present(),
.ahead_by(), and .behind_by().
I'm going to add more detailed output there. This is a step towards "branch
list" template. "tag list -T" wouldn't be that useful, but it shares primitives
with "branch list -T".
The `move_commits` function accepts a set of target commits to shift to
a new location given by `new_parents` and `new_children`. The roots of
the target set will be reparented onto `new_parents`. `new_children`
will then be reparented onto the heads of the target set.
The commits will be rebased in reverse topological order based on the
new set of parents of each commit, which avoids the need for multiple
sets of rebase operations.
When you use e.g. `git switch` to check out a conflicted commit,
you're going to end up with the `.jjconflicts-*` directories in your
working copy. It's probably not obvious what those mean. This patch
adds a README file to the root tree to try to explain to users what's
going on and how to recover.
The authoritative information about conflicts is stored in the
`jj:trees` commit header. The contents of conflicted commits is only
used for preventing GC. We can therefore add contents to the tree
without much consequence.
I will be updating `rebase -r` to avoid simplifying ancestor merges in a
subsequent commit, which will cause existing tests to fail for the Git
backend due to ancestor merges with the root commit.
I'm not sure if this was an intentional omission, but I think it would be
useful to have `-e` as a short flag for `--edit`. I don't usually edit commits,
but I do use `prev` and `next` with edit to navigate to a commit that I want to
squash. Often this is easier than typing `--from` and `--into` plus the change
IDs.
If people want to edit commits we shouldn't stand in their way.
This is following on the rewrite for `parallelize`.
- https://github.com/martinvonz/jj/pull/3521
Since rebase_descendants from rebase.rs is no longer used outside of that file,
it can be made private again.
In a future commit these tests will run with both `jj commit` and `jj new` since
both will have the same semantics for advancing the branch pointer.
Parameterizing the tests allows us to run both variants without duplicating the
test bodies. Since the commit IDs are different when `jj describe` + `jj new`
is used instead of `jj commit`, this commit also drops the commit IDs from the
test snapshots. This is fine because the commit IDs are not important for these
tests.
## Feature Description
If enabled in the user or repository settings, the local branches pointing to the
parents of the revision targeted by `jj commit` will be advanced to the newly
created commit. Support for `jj new` will be added in a future change.
This behavior can be enabled by default for all branches by setting
the following in the config.toml:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
```
Specific branches can also be disabled:
```
[experimental-advance-branches]
enabled-branches = ["glob:*"]
disabled-branches = ["main"]
```
Branches that match a disabled pattern will not be advanced, even if they also
match an enabled pattern.
This implements feature request #2338.
This one just tests with a larger value and a human-readable string (10KB).
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: If9e5d62146b369d3a1b7efe4e56a1b6b4338c720
For new users this results in a significantly better error output, that
actually shows them how to solve the problem, and why it happened.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ide0c86fdfb40d66f970ceaef7b60a71392d2cd4b
Previously, this command would work:
jj --config-toml='snapshot.max-new-file-size="1"' st
And is equivalent to this:
jj --config-toml='snapshot.max-new-file-size="1B"' st
But this would not work, despite looking like it should:
jj --config-toml='snapshot.max-new-file-size=1' st
This is extremely confusing for users.
This config value is deserialized via serde; and while the `HumanByteSize`
struct allegedly implemented Serde's `visit_u64` method, it was not called by
the deserialize visitor. Strangely, adding an `visit_i64` method *did* work, but
then requires handling of overflow, etc. This is likely because TOML integers
are naturally specified in `i64`.
Instead, just don't bother with any of that; implement a `TryFrom<String>`
instance for `HumanByteSize` that uses `u64::from_str` to try parsing the string
immediately; *then* fall back to `parse_human_byte_size` if that doesn't work.
This not only fixes the behavior but, IMO, is much simpler to reason about; we
get our `Deserialize` instance for free from the `TryFrom` instance.
Finally, this adjusts the test for `max-new-file-size` to now use a raw integer
literal, to ensure it doesn't regress. (There are already in-crate tests for
parsing the human readable strings.)
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I8dafa2358d039ad1c07e9a512c1d10fed5845738
I'm going to make some `jj parallelize` cases that currently error out
instead be successful. Some of the will result in ancestor merges with
the root commit. This patch updates those tests to avoid that.
`jj parallelize` was a good example of a command that can be
simplified by the new API, so I decided to rewrite it as an example.
The rewritten version is more flexible and doesn't actually need the
restrictions from the old version (such as checking that the commits
are connected). I still left the check for now to keep this patch
somewhat small. A subsequent commit will remove the restrictions.
It was removed at 522025e091 "log: remove unused and inconsistent `log`
label", but obslog had the same inconsistency. Since it's now easy to label
the template output, let's re-add the "log" label.
The change in test_templater_upper_lower() is noop. Formatter no longer
emits reset sequence in the middle because the template is still labeled.
Mercurial appears to resolve cwd-relative path first, so "glob:*.c" could be
parsed as "**/*.c" if cwd was literally "**". It wouldn't practically matter,
but isn't correct. Instead, jj's parser first splits glob into literal part
and pattern. That's mainly because we want to parse the user input texts into
type-safe objects, and (RepoPathBuf, glob::Pattern) pairs are the simplest
ones. The current parser can't handle patterns like "foo/*/.." (= "foo" ?),
and errors out. I believe this restriction is acceptable.
Unlike literal paths, the 'glob:' pattern anchors to the whole file path. I
don't think "prefix"-matching glob is useful, and making it the default would
be rather confusing.
This is the last non-debug command that doesn't support file patterns. It
wouldn't make much sense to "cat" multiple files (despite the command name),
but doing that should be harmless.
Prepares for migrating to the matcher API. "Path exists but is not a file"
error is turned into a warning because the loop shouldn't terminate there.
"No such path" error message is also updated for consistency.
if `--use-destination-message/-u` is passed to `jj squash`, the resulting
revision will use the description of the destination revision and the
description(s) of the source revision(s) will be discarded.
If this doesn't work out, maybe we can try one of these:
a. fall back to bare file name if expression doesn't contain any operator-like
characters (e.g. "f(x" is an error, but "f x" can be parsed as bare string)
b. introduce command-line flag to opt in (e.g. -e FILESET)
c. introduce pattern prefix to opt in (e.g. set:FILESET)
Closes#3239, #2915, #2286
This is the same as the `test_split_siblings_with_merge_child` added in
https://github.com/martinvonz/jj/pull/3485, but without the siblings flag. I
forgot to add the non-siblings version in that PR.
#3485
Ilya reported this in https://github.com/martinvonz/jj/issues/3483.
The bug was introduced in 976320726d.
Before this fix, `jj split` dropped any parents what weren't involved in the
split when it rebased the children of the commit being split. This meant that
any children which were merge commits lost their other parents unintentionally.
Fixes#3483
Maybe we can optimize it to check paths during diffing, but I think it's okay
to add extra lookup cost at the end. The size of the path arguments is usually
small.
Closes#505
Path parsing will be migrated to parse_union_filesets(), but I haven't decided
how we'll go forward:
a. migrate everything to fileset
b. require flag like "-e FILESET" (note -p conflicts with log -p)
c. require flag like "-e FILESET" and deprecate positional PATHs #2554
d. require prefix like "set:FILESET" (not consistent with -r REVSET)
I'm currently dogfooding (a). It works for me, but I don't use exotic file
names that would require quoting in zsh.
#3239
Before this commit `jj prev` fails if the current working copy commit is a
merge commit. After this commit it will prompt the user to choose the ancestor
they want to select.
#2126
This commit adds commit graphs to most of the tests for `jj prev` to make it
clearer where `@` points before and after `prev` is run.
In addition, there were a couple of tests where the comments suggested the test
meant to have `@` pointing to a specific commit, but it actually pointed to an
empty child of that commit.
This sort of issue also exists in `test_prev_editing`. The test is supposed to
check that `--edit` is implied if you run `jj prev` on an interior commit, but
it actually caused a new empty commit to be created since `@` was sitting on a
tip commit.
This will hopefully make it clear that `jj prev` does not
move by [OFFSET] relative to `@`, which is a misconception
that I had and I think others may also have.
I am suggesting this change as a result of the vigorous discussion in
these two issues:
- https://github.com/martinvonz/jj/issues/3426
- https://github.com/martinvonz/jj/pull/3445
We should make similar changes to `jj next` as well since
it follows similar rules.
This is basically the same as string kind:pattern syntax in CLI. This will
hopefully be superseded by filesets, but I'm not sure if that will work out.
A file name is more likely to contain whitespaces, which will have to be
quoted as '"Documents and Settings"'.
There are no more callers of parse_function_argument_to_string(), so it's
removed. This function was a thin wrapper of literal parser, and can be
easily reintroduced if needed.
Parallelize revisions by making them siblings
Running `jj parallelize 1::2` will transform the history like this:
```text
3
| 3
2 / \
| -> 1 2
1 \ /
| 0
0
```
Each of the target revisions is rebased onto the parents of the root(s) of
the target revset (not to be confused with the repo root). The children of
the head(s) of the target revset are rebased onto the target revisions.
The target revset is the union of the REVISIONS arguments.
The target revset being parallelized must satisfy several conditions,
otherwise the command will fail.
1. The heads of the target revset must not have different children.
2. The roots of the target revset must not have different parents.
3. The parents of all target revisions except the roots must also be
parallelized. This means that the target revisions must be connected.
This lets users use "large" revsets in commands such as `jj rebase`, without
needing the `all:` modifier.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Ica80927324f3d634413d3cc79fbc73057ccefd8a
Offset is a more descriptive noun for this argument. This commit also tweaks
the help message for the argument.
This isn't an option/flag, so this change should be transparent to users.
Like -r/--revisions, it should be okay to filter synced/non-tracking remote
branches by name.
conflicts_with_all = "tracked" is redundant, so removed as well. The tracked
field declares that it conflicts with --all-remotes.
Since "all:" implies that the user doesn't care about the order of the
revisions within that argument, it should be okay if two "all:" sets overlapped.
When a commit is split, any branches pointing to it are moved to the second
commit created by the split. This is true even if the --siblings option is
used.
#3419
If the --siblings option is used, the target commit is split into two sibling
commits instead of parent and child commits. Any children of the original
commit will have both siblings as their new parents.
#2274
Note that `jj resolve` already had its own `--quiet` flag. The output
with `--quiet` for that command got a lot quieter with the global
`--quiet` also taking effect. That seems reasonable to me.
Templater doesn't have the one yet, but I think it belongs to the same
category.
For clap::Error, we could use clap's own mechanism to render suggestions as
"tip: ...", but I feel "Hint: ..." looks better because our error/hint message
is capitalized.
