This seems more useful if aliases are nested. The innermost error usually
contains the problem, and the outer errors are contexts where aliases are
expanded.
Except for the generic list and template methods. We'll need a bit more
refactoring to migrate List<T> method builders to be compatible with
non-capturing fn() type.
The recovery commit we create when we run into a stale working copy
with a missing operation currently has an empty tree. Our commit
backend at Google creates an index of which files changed in each
commit. That gets really expensive when a commit deletes all files in
the repo, as these recovery commits do. So for our backend, it is much
better to make the recovery commit empty instead. That's what this
patch does.
It almost doesn't matter functionally what tree we use for it since we
don't care much about the current tree when snapshotting the working
copy. It does matter in a few cases, however. One case is for
conflicts. In that case, it's likely better to use the recovery
commit's parent as base tree (as we do by making the recovery commit
empty) than to use an empty tree, as that would guarantee that all
conflicts would be considered resolved. (Side note: perhaps we should
start looking at the current commit's parent instead of looking at the
current commit when snapshotting, but that's a topic for another day.)
When we abandon a working-copy commit, we create a new working-copy
commit on top. This behave is very useful, but it's not obvious. Let's
document it.
Thankfully, 2bbefcc338 (rewrite: default to not simplifying ancestor
merges) means that there are much fewer commands where we need to
document this behavior.
There are two major goals:
* provide typo hints in a similar way to revset
* make methods extensible
The created method table is bound to the 'repo lifetime because of the problem
described in the inline comment. It would be nice if we can build cachable
core method table for<'repo> CommitTemplateLanguage<'repo, '_>, but I couldn't
figure out how.
Add an option to list tracked branches only
This option keeps most of the current `--all` printing logic, but:
- Omits local Git-tracking branches by default (can be extended to
support filtering by remote).
- Skip over the branch altogether if it doesn't contain tracked remotes
- Don't print the untracked_remote_refs at the end
Usage:
`jj branch list -t`
`jj branch list --tracked`
`jj branch list --tracked <branch name>`
I think the user usually wants to abandon only newly empty commits. I
think they should use `jj abandon` if they want to get rid of already
empty commits. By keeping already empty commits, we don't need to
special-case the working copy and merge commits.
This allows us to call alias function with the top-level object.
For convenience, all self.<method>()s are available as keywords. I don't think
we'll want to deprecate them. It would be tedious if we had to specify
-T'self.commit_id()' instead of -Tcommit_id.
If I remember correctly, wrap_fn() was added to help type inference. It no
longer makes sense because the type is coerced by TemplateFunction::new()
and language.wrap_*().
The description of `jj diff` was lost in commit b5e4e670. We later got
a short description for it in b5e4e670. This patch restores the
original description.
This eliminates the separate keywords table. All keywords are resolved through
the pseudo "self" property. Maybe we'll add "self" keyword/variable later.
This is copied from the commit templater. I'm going to extract the "self"
property handling to the core template builder, and build_keyword() methods
will be replaced with that.
The default immutable_heads() includes tags(), which makes sense, but computing
heads(tags()) can be expensive because the tags() set is usually sparse. For
example, "jj bench revset 'heads(tags())'" took 157ms in my linux stable
mirror. We can of course optimize the heads evaluation by using bit set or
segmented index, but the query includes many historical heads if the repository
has per-release branches, which are uninteresting anyway. So, this patch
replaces heads(immutable_heads()) with trunk().
The reason we include heads(immutable_heads()) is to mitigate the following
problem. Suppose trunk() is the branch to be based off, I think using trunk()
here is pretty good.
```
A B
*---*----* trunk() ⊆ immutable_heads()
\
* C
```
https://github.com/martinvonz/jj/pull/2247#discussion_r1335078879
In my linux stable mirror, this makes the default log revset evaluation super
fast. immutable_heads(), if configured properly, includes many historical
branch heads which are also the visible heads.
revsets/immutable_heads()..
---------------------------
0 12.27 117.1±0.77m
3 1.00 9.5±0.08m
It should be useful at least in the presentation layer to know which
operations correspond to working-copy snapshots. They might be
rendered differently in the graph, for example. Or maybe an undo
command wants to warn if you just undid a snapshot operation. This
patch just introduces a field in the metadata to store the
information.
I think I prefer this behavior because it's less lossy. The user can
manually simplify the history with `jj rebase -s <merge commit> -d
<one of the parents>` afterwards. We can roll this change back later
if we find it annoying.
We now have lots of tests of ancestor merges in `test_bug_2600()`, so
we don't need the ones in `test_basics()`. Since it doesn't have the
"nottherootcommit" commit, it would break when we change the default
to preserve ancestor merges.
I think the conclusion from #2600 is that at least auto-rebasing
should not simplify merge commits that merge a commit with its
ancestor. Let's start by adding an option for that in the library.
The shortest change id prefix will become a few digits longer, but I think
that's acceptable. Entries included in the "revsets.short-prefixes" set are
unaffected.
The reachable set is calculated eagerly, but this is still faster as we no
longer need to sort the reachable entries by change id. The lazy version will
save another ~100ms in mid-size repos.
"jj log" without working copy snapshot:
```
% hyperfine --sort command --warmup 3 --runs 20 -L bin jj-0,jj-1,jj-2 \
-s "target/release-with-debug/{bin} -R ~/mirrors/linux debug reindex" \
"target/release-with-debug/{bin} -R ~/mirrors/linux \
--ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=\"\"'"
Benchmark 1: target/release-with-debug/jj-0 -R ~/mirrors/linux --ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=""'
Time (mean ± σ): 353.6 ms ± 11.9 ms [User: 266.7 ms, System: 87.0 ms]
Range (min … max): 329.0 ms … 365.6 ms 20 runs
Benchmark 2: target/release-with-debug/jj-1 -R ~/mirrors/linux --ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=""'
Time (mean ± σ): 271.3 ms ± 9.9 ms [User: 183.8 ms, System: 87.7 ms]
Range (min … max): 250.5 ms … 282.7 ms 20 runs
Relative speed comparison
1.99 ± 0.16 target/release-with-debug/jj-0 -R ~/mirrors/linux --ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=""'
1.53 ± 0.12 target/release-with-debug/jj-1 -R ~/mirrors/linux --ignore-working-copy log -r.. -l100 --config-toml='revsets.short-prefixes=""'
```
"jj status" with working copy snapshot (watchman enabled):
```
% hyperfine --sort command --warmup 3 --runs 20 -L bin jj-0,jj-1,jj-2 \
-s "target/release-with-debug/{bin} -R ~/mirrors/linux debug reindex" \
"target/release-with-debug/{bin} -R ~/mirrors/linux \
status --config-toml='revsets.short-prefixes=\"\"'"
Benchmark 1: target/release-with-debug/jj-0 -R ~/mirrors/linux status --config-toml='revsets.short-prefixes=""'
Time (mean ± σ): 396.6 ms ± 10.1 ms [User: 300.7 ms, System: 94.0 ms]
Range (min … max): 373.6 ms … 408.0 ms 20 runs
Benchmark 2: target/release-with-debug/jj-1 -R ~/mirrors/linux status --config-toml='revsets.short-prefixes=""'
Time (mean ± σ): 318.6 ms ± 12.6 ms [User: 219.1 ms, System: 94.1 ms]
Range (min … max): 294.2 ms … 333.0 ms 20 runs
Relative speed comparison
1.85 ± 0.14 target/release-with-debug/jj-0 -R ~/mirrors/linux status --config-toml='revsets.short-prefixes=""'
1.48 ± 0.12 target/release-with-debug/jj-1 -R ~/mirrors/linux status --config-toml='revsets.short-prefixes=""'
```
When adding a new workspace, I would expect that it inherits the
patterns from the workspace I ran the command in. We currently don't
do that. That's quite annoying when your repo has very many files
(like at Google).
`graphlog::Edge` is used somewhat inconsistently. I've replaced `Edge::Present`
with two distinct `Edge::Direct` and `Edge::Indirect` which simplifies the
construction of the enum.
The `ContentHash` documentation specifies that implementations for enums should
hash the ordinal number of the variant contained in the enum as a 32-bit
little-endian number and then hash the contents of the variant, if any.
The current implementations for `std::Option`, `MergedTreeId`, and
`RemoteRefState` are non-conformant since they hash the ordinal number as a u8
with platform specific endianness.
Fixes#3051
The legacy parsing rules are turned into compatibility errors. The x:y rule
is temporarily enabled when parsing string patterns. It's weird, but we can't
isolate the parsing function because a string pattern may be defined in an
alias.
This adds a config to render a synthetic node with a "(elided
revisions)" description for elided segments of the graph.
I didn't add any templating support for the elided nodes because I'm
not sure how we would want that to work. In particular, I don't know
what `commit_id` and most other keywords should return for elided
revisions.
Users who edit non-head commits usually expect `jj next/prev` to
continue to edit the next/previous commit, so let's make that the
default behavior. This should not confuse users who don't edit
non-head commits since they will simply not be in this state. My main
concern is that doing `jj next; jj prev` will now usually take you
back to the previous commit, but not if you started on the parent of a
head commit.
The main goal is to avoid having a symlink in our source tree. Currently, there
is no good way to work with the `jj` repo with `jj` on Windows. Currently `jj`
just crashes with symlinks. This is being worked on, see e.g. #2939, but it will
always depend on whether Developer Mode is enabled in Windows or whether
symlinks are materialized as text files with symlinks. Finally, MkDocs has
trouble following symlinks on Windows, so building docs wouldn't work there.
Another advantage is that, previously, we were lucky that MkDocs treats `insta`
header in `cli-reference@.md.snap` as a Markdown header and follows symlinks at
all. Now, we no longer depend on that.
Follows up 9702a425e5 "Allow negative numbers in the template grammar."
Since we've added parsing rules for operator expressions, it makes sense to
parse unary '-' as operator.
If the operation corresponding to a workspace is missing for some reason
(the specific situation in the test in this commit is that an operation
was abandoned and garbage-collected from another workspace), currently,
jj fails with a 255 error code. Teach jj a way to recover from this
situation.
When jj detects such a situation, it prints a message and stops
operation, similar to when a workspace is stale. The message tells the
user what command to run.
When that command is run, jj loads the repo at the @ operation (instead
of the operation of the workspace), creates a new commit on the @
commit with an empty tree, and then proceeds as usual - in particular,
including the auto-snapshotting of the working tree, which creates
another commit that obsoletes the newly created commit.
There are several design points I considered.
1) Whether the recovery should be automatic, or (as in this commit)
manual in that the user should be prompted to run a command. The user
might prefer to recover in another way (e.g. by simply deleting the
workspace) and this situation is (hopefully) rare enough that I think
it's better to prompt the user.
2) Which command the user should be prompted to run (and thus, which
command should be taught to perform the recovery). I chose "workspace
update-stale" because the circumstances are very similar to it: it's
symptom is that the regular jj operation is blocked somewhere at the
beginning, and "workspace update-stale" already does some special work
before the blockage (this commit adds more of such special work). But it
might be better for something more explicitly named, or even a sequence
of commands (e.g. "create a new operation that becomes @ that no
workspace points to", "low-level command that makes a workspace point to
the operation @") but I can see how this can be unnecessarily confusing
for the user.
3) How we recover. I can think of several ways:
a) Always create a commit, and allow the automatic snapshotting to
create another commit that obsoletes this commit.
b) Create a commit but somehow teach the automatic snapshotting to
replace the created commit in-place (so it has no predecessor, as viewed
in "obslog").
c) Do either a) or b), with the added improvement that if there is no
diff between the newly created commit and the former @, to behave as if
no new commit was created (@ remains as the former @).
I chose a) since it was the simplest and most easily reasoned about,
which I think is the best way to go when recovering from a rare
situation.
A subsequent commit will need to handle the return value of
check_stale_working_copy() in 3 different ways, so a boolean will soon
not be sufficient. In preparation for that, inline is_stale() into its
caller, converting it into a "match".
These operator symbols are different from the ones in the revset language. I
have no idea if we need bitwise operators, but we'll probably add comparison
operators. It would look weird if 'x == y & z' were parsed as '(x == y) & z'.
this greatly speeds up the time to run all tests, at the cost of slightly larger recompile times for individual tests.
this unfortunately adds the requirement that all tests are listed in `runner.rs` for the crate.
to avoid forgetting, i've added a new test that ensures the directory is in sync with the file.
## benchmarks
before this change, recompiling all tests took 32-50 seconds and running a single test took 3.5 seconds:
```
; hyperfine 'touch lib/src/lib.rs && cargo t --test test_working_copy'
Time (mean ± σ): 3.543 s ± 0.168 s [User: 2.597 s, System: 1.262 s]
Range (min … max): 3.400 s … 3.847 s 10 runs
```
after this change, recompiling all tests take 4 seconds:
```
; hyperfine 'touch lib/src/lib.rs ; cargo t --test runner --no-run'
Time (mean ± σ): 4.055 s ± 0.123 s [User: 3.591 s, System: 1.593 s]
Range (min … max): 3.804 s … 4.159 s 10 runs
```
and running a single test takes about the same:
```
; hyperfine 'touch lib/src/lib.rs && cargo t --test runner -- test_working_copy'
Time (mean ± σ): 4.129 s ± 0.120 s [User: 3.636 s, System: 1.593 s]
Range (min … max): 3.933 s … 4.346 s 10 runs
```
about 1.4 seconds of that is the time for the runner, of which .4 is the time for the linker. so
there may be room for further improving the times.
It tries to push all deleted branches, but can only succeed for tracked
branches.
Closes#2946, as there's probably no need to have `--deleted --tracked`
that would only be different in that the warnings wouldn't be printed.
Thanks to @yuja for pointing this out.
Our virtual file system at Google (CitC) would like to know the commit
so it can scan backwards and find the closest mainline tree based on
it. Since we always record an operation id (which resolves to a
working-copy commit) when we write the working-copy state, it doesn't
seem like a restriction to require a commit.
When the user doesn't have a configured default command, we show a
hint saying to set `ui.default-command`. I think the user is very
likely to want to set that in the user-wide config, so let's include
the command in the hint.
I'll probably add infix logical operators later, but the surround() function
is still useful because we don't have to repeat the condition:
if(x || y, "<" ++ separate(" ", x, y) ++ ">")
surround("<", ">", separate(" ", x, y))
It can't be used if we want to add placeholder text, though:
if(x || y, "<" ++ separate(" ", x, y) ++ ">", "(none)")
Closes#2924
This reimplements the change 9faa4670d5 "cli: on init, import git refs prior
to importing HEAD." Initialization is special because the HEAD ref isn't
available to jj yet, and there is an empty working-copy commit.
The initialization function could be refactored to go through the common code
path, but I think doing that would make future improvement harder. We might
want to initialize tracking branches based on .git/config for example.
Fixes#2942
This initializes a git backed repo.
* It does the same thing as `jj init --git` except that it
has a --colocated flag to explicitly specify that we want
the .git repo to be side-by-side the .jj repo in the working
directory.
* `jj init --git` will keep the current behaviour and will not
be able to create colocated git backed repos.
* Update test snapshots.
A few minor updates after 0f27152 AKA #2945
Specifically, I tried to change the help text so that it looks better as
Markdown. I also reworded the deprecation warning and added a hint.
this has two main advantages:
- it makes it clear that the shells are mutually exclusive
- it allows us to extend the command with shell-specific options in the future if necessary
as a happy accident, it also adds support for `elvish` and `powershell`.
for backwards compatibility, this also keeps the existing options as hidden flags.
i am not super happy with how the new help looks; the instructions for setting up the shell are
squished together and IMO a little harder to read. i'm open to suggestions.
it's somewhat confusing to me that the `--bash` flag exists at all, since it does nothing - maybe it makes sense to give a hard error? or just remove the flag?
but in any case, it seems good to document the existing behavior.
previously, `jj diff` would show the full contents of binary files such as images.
after this change, it instead shows "(binary)". it still shows the filename and metadata so that
users can open the file in the viewer of their choce.
future work could involve showing binary files as Sixel or similar; finding a way to compare large
non-binary files without filling up the screen; or extending the data backends to avoid having to
read the whole file contents into memory.
Previously, `jj git push; jj git push` would tell the user that "No
branches point to the specified revisions.". I found this confusing,
even though strictly speaking it is correct (as the default revset only
considers revisions that haven't been pushed to the remote).
Closes#2241
The error output gets more verbose because all gix error sources are printed.
Maybe we'll need a better formatting, but changing to multi-line output doesn't
look nice either.
These error types are special because the message is embedded in ASCII art. I
think it would be a source of bugs if some error types had ": {source}" but
others don't. So I'm going to remove all ": {source}"s, and let the callers
concatenate them when needed.
Summary: As discussed in Discord, on GitHub, and elsewhere, this change
deprecates the use of `jj merge` and suggests users use `jj new` exclusively
instead. `merge` isn't completely unfit as a name; but we think it obscures
the generality of `new` and we want people to use it instead.
To further drive the bit home, by default, `jj merge` is now hidden. This will
hopefully stop new users from running into it.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I94938aca9d3e2aa12d1394a5fbc58acce3185b56
