It's quite costly to inject virtual interrupt to the guest, especially
in INTx case.
To reduce the number of interrupts, in process_rx(), we don't have to
inject interrupt on every frame, but wait until process_rx() finishes
processing all frames.
On eve, iperf3 gets ~15% improvement, "iperf3 -R" gets ~30% improvement.
BUG=chromium:854765
TEST=iperf3 on eve and Linux
Change-Id: Ie0560d8f42235d2371addb6de34c5f93d11a405f
Signed-off-by: Zide Chen <zide.chen@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1865021
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Commit-Queue: Stephen Barber <smbarber@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
The audio_streams interface now supports specifying a sample format.
Update call sites to indicate that the desired format is S16LE.
BUG=chromium:1010667
TEST=aplay within vm
Cq-Depend: chromium:1856646
Change-Id: Ib69ff9b39196905f0f429eaf771f6f92901bfc71
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1856586
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Tested-by: Fletcher Woodruff <fletcherw@chromium.org>
Commit-Queue: Fletcher Woodruff <fletcherw@chromium.org>
Rather than using `use ::vhost::...` to disambiguate the imports, remove
the conflicting `use virtio_sys::vhost` and add `virtio_sys::` to each
location that used `vhost::...` previously.
The `use ::vhost::...` syntax confuses rustfmt when run directly on
these two files, causing it to rewrite the imports into something that
doesn't actually compile.
BUG=None
TEST=rustfmt --check devices/src/virtio/vhost/net.rs
TEST=rustfmt --check devices/src/virtio/vhost/vsock.rs
Change-Id: I8483f5327a1e2b3ae4887f0b3cef20a917d7410e
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1865370
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
This just removes a few extraneous blank lines that the new rustfmt
doesn't like.
BUG=None
TEST=bin/fmt --check
Change-Id: I4482f873bdfe19f2f73f86cfdd99d6cce873593c
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1863000
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Drop the dependency on libusb and reimplement the host USB backend using
usb_sys to wrap the Linux usbdevfs ioctls.
This allows sandboxing to work without any dependency on libusb patches,
and it gives us the flexibility to modify and update the USB backend
without depending on an external third-party library.
BUG=chromium:987833
TEST=`adb logcat` on nami with Nexus 5 attached
TEST=deploy app to phone with Android Studio
TEST=Run EdgeTPU USB accelerator demo (including DFU mode transition)
Cq-Depend: chromium:1773695
Change-Id: I4321c2b6142caac15f48f197795a37d59d268831
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1783601
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
crosvm doesn't support MSI/MSI-x, but kvmgt vgpu support MSI only
through cfg msi capability. This is a simple msi implementation, it
detects msi capability and track msi control, data and address info, then
call vfio kernel to enable / disable msi interrupt.
Currently it supports one vetor per MSI. It could extend to multi vetors and
MSI-x.
BUG=chromium:992270
TEST=none
Change-Id: I04fc95f23a07f9698237c014d9f909d011f447ef
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1581142
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Fix boxed_local, const_static_lifetime, useless_format, and
redundant_closure clippy warnings in the VFIO code.
This fixes all clippy warnings except a single instance of
let_and_return in VfioPciDevice::keep_fds(), since that code is modified
in an upcoming patch.
BUG=None
TEST=./build_test.py
TEST=bin/clippy
Change-Id: I548adbc6b92448fc0db82ed72214d73b0eabaf5c
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1822697
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Add the constants and struct definitions from the kernel fuse interface.
These bindings are manually generated from `include/uapi/linux/fuse.h`
in the kernel repo.
BUG=b:136128319
TEST=none; these aren't used anywhere yet
Change-Id: I03d11bc55eca6b8269f1e63a1187ef458ee16f28
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1705655
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Refactor the Reader and Writer implementations for DescriptorChains.
This has several changes:
* Change the DescriptorChainConsumer to keep a
VecDeque<VolatileSlice> instead of an iterator. This delegates the
fiddly business of sub-slicing chunks of memory to the VolatileSlice
implementation.
* Read in the entire DescriptorChain once when the Reader or Writer is
first constructed. This allows us to validate the DescriptorChain
in the beginning rather than having to deal with an invalid
DescriptorChain in the middle of the device operating on it.
Combined with the check that enforces the ordering of read/write
descriptors in a previous change we can be sure that the entire
descriptor chain that we have copied in is valid.
* Add a new `split_at` method so that we can split the Reader/Writer
into multiple pieces, each responsible for reading/writing a
separate part of the DescriptorChain. This is particularly useful
for implementing zero-copy data transfer as we sometimes need to
write the data first and then update an earlier part of the buffer
with the number of bytes written.
* Stop caching the available bytes in the DescriptorChain. The
previous implementation iterated over the remaining descriptors in
the chain and then only updated the cached value. If a mis-behaving
guest then changed one of the later descriptors, the cached value
would no longer be valid.
* Check for integer overflow when calculating the number of bytes
available in the chain. A guest could fill a chain with five 1GB
descriptors and cause an integer overflow on a 32-bit machine.
This would previously crash the device process since we compile with
integer overflow checks enabled but it would be better to return an
error instead.
* Clean up the Read/Write impls. Having 2 different functions called
`read`, with different behavior is just confusing. Consolidate on
the Read/Write traits from `std::io`.
* Change the `read_to` and `write_from` functions to be generic over
types that implement `FileReadWriteVolatile` since we are not
allowed to assume that it's safe to call read or write on something
just because it implements `AsRawFd`. Also add `*at` variants that
read or write to a particular offset rather than the kernel offset.
* Change the callback passed to the `consume` function of
`DescriptorChainConsumer` to take a `&[VolatileSlice]` instead.
This way we can use the `*vectored` versions of some methods to
reduce the number of I/O syscalls we need to make.
* Change the `Result` types that are returned. Functions that perform
I/O return an `io::Result`. Functions that only work on guest
memory return a `guest_memory::Result`. This makes it easier to
inter-operate with the functions from `std::io`.
* Change some u64/u32 parameters to usize to avoid having to convert
back and forth between the two in various places.
BUG=b:136128319
TEST=unit tests
Change-Id: I15102f7b4035d66b5ce0891df42b656411e8279f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1757240
Auto-Submit: Chirantan Ekbote <chirantan@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Write accessess cannot fail (in the CommandResult sense) and the result
did not carry any data, so remove the response from the Write command.
This should improve the speed of write requests for sandboxed devices.
For example, with the sandboxed serial device, boot time with a release
build of crosvm on my workstation goes from 1.7 seconds to 1.2 seconds,
measured by timing a boot with a missing init so that the kernel panics
and shuts down immediately.
BUG=None
TEST=time crosvm run -p init=bogus vm_kernel
Change-Id: I125bb831235ca741ae1cc6c86a02a5d863d1a211
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1853970
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
This change plumbs the jail throughout the arch specific device creation
process. It also adds a custom callback support for the ProxyDevice so
that the main process can interrupt the child serial process when it has
incoming bytes.
TEST=crosvm run
BUG=None
Change-Id: I6af7d2cb0acbba9bf42eaeeb294cee2bce4a1f36
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1752589
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Commit-Queue: Zach Reizner <zachr@chromium.org>
- Send only one event while re-sampling.
- Don't sent event if the new sr is identical to the old one
This can reduce the rate to trigger the issue.
BUG=chromium:937977
TEST=Build and run lots of aplay and arecord in guest vm
Change-Id: Ibd21f363076c977ae256079e2615094b7ed2408b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1840752
Tested-by: Chih-Yang Hsia <paulhsia@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Commit-Queue: Chih-Yang Hsia <paulhsia@chromium.org>
Add error handling for adding/removing the tapfd to epoll.
We only remove the tap fd from the poll context if the tap is
readable, i.e. it would busy loop, so don't assume it's removed
from the poll context when there's a deferred rx frame.
BUG=chromium:1010742
TEST=arcvm network works
Change-Id: I84aab2dbe7ea31d724f04d3b3fb0a6916f232300
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1842399
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Commit-Queue: Stephen Barber <smbarber@chromium.org>
Do not write to the irq_evt eventfd when interrupt_high is false; the
value written to the eventfd is ignored, so despite the '0' in the call,
this would re-trigger the interrupt even when it should not have been
asserted. Since ac97 is a PCI device, its interrupt is level triggered,
and re-asserting it on EOI is handled by the irq_resample_thread code.
BUG=None
TEST=`aplay /dev/urandom` from Crostini on nami
Change-Id: I6ad8e40b818e0495ad58b6902d88dd61103aed9d
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1838762
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Chih-Yang Hsia <paulhsia@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
The virtio spec requires that all read-only descriptors appear in the
chain before any write-only descriptors. Enforce this in the
`checked_new` function by adding a new `required_flags` parameter. The
`next_descriptor` function will set this to `VIRTQ_DESC_F_WRITE` if the
current descriptor is write-only. This ensures that once we see a
write-only descriptor, all following descriptors must be write-only.
BUG=b:136127316
TEST=none
Change-Id: Id8f942a4236a20f62f35439f3648dbec17e14c00
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1757239
Auto-Submit: Chirantan Ekbote <chirantan@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
If the guest is unable to return rx queue buffers to the device, we should
temporarily stop polling for reads on the tap fd. Otherwise, we'll spin and
burn CPU needlessly.
BUG=chromium:1010742
TEST=repro from b/141940546
Change-Id: Iac004e870779a8dd39004f44b44e17a2b45bcfa1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1836914
Tested-by: Stephen Barber <smbarber@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Stephen Barber <smbarber@chromium.org>
Convert the virtio pmem device to use the descriptor_utils Reader/Writer
helpers to simplify the code and allow support of arbitrary descriptor
layouts.
BUG=chromium:966258
TEST=./build_test.py
Change-Id: I9ccbdf2833980e4c44e19975f9091f9aea56c94b
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1811713
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Convert the virtio input device to use the descriptor_utils
Reader/Writer helpers to simplify the code and allow support of
arbitrary descriptor layouts.
BUG=chromium:966258
TEST=./build_test.py
Change-Id: Ia9272496dc59b29ea9cde9f6454099c881242d4c
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1811712
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Switching the devices to the new interface reduces code duplication and
will ease fuzzing the devices as they now have a common input and output
interface for descriptors.
BUG=chromium:966258
TEST=vm.CrostiniStartEverything
Change-Id: I823c04dfc24e017433f8e8ab167bbd5dfafd338b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1647371
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
For each guest memory region, setup the corresponding gpa to hva map
in the kernel vfio iommu table. Then the kernel vfio driver could
get the hpa through gpa. Device could use this gpa for dma also.
BUG=chromium:992270
TEST=none
Change-Id: I04008d68ab2ed182a789d6ee8c97a0ed9e1e4756
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1581141
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Create VFIO device and VFIO PCI device in create_devices() function, and
intergrate it into PciRootBridge, so guest could see this vfio device.
Add a vfio config parameter, this config point to passthrough or mdev
device sysfs path.
For passthrough case, first user unbind host device from its driver,
then bind host device to vfio-pci. Like:
echo 0000:00:02.0 > /sys/bus/pci/devices/0000:00:02.0/driver/unbind
ech0 8086 1912 > /sys/bus/pci/drivers/vfio-pci/new_id
Finally pass the sysfs to crosvm through
--vfio=/sys/bus/pci/devices/0000:00:02.0
For mdev case, user create a mdev device through
echo $UUID > mdev_type/create, then pass this mdev device to crosvm like
--vfio=/sys/bus/pci/devices/0000:00:02.0/$UUID
BUG=chromium:992270
TEST=none
Change-Id: I0f59d6e93f62f9ab0727ad3a867d204f4ff6ad2d
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1581140
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
In the same spirit as write_all() for the standard io::Write::write()
function, add a write_zeroes_all() function with a default
implementation that calls write_zeroes() in a loop until the requested
length is met. This will allow write_zeroes implementations that don't
necessarily fulfill the entire requested length.
BUG=None
TEST=cargo test -p sys_util write_zeroes
Change-Id: I0fc3a4b3fe8904946e253ab8a2687555b12657be
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1811466
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Cody Schuffelen <schuffelen@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Alloc::PciBar {..} is used as a key in the AddressAllocator's
hashmap, so inform the device about the pci bus/dev numbers.
BUG=chromium:924405
TEST=compile
Change-Id: Ib9d94e516269c1dc9a375c2ceb9775cf5a421156
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1811585
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Commit-Queue: Gurchetan Singh <gurchetansingh@chromium.org>
According to kernel Documents/vfio.txt and
Documents/vfio-mediated-device.txt,user pass host assigned
device or mdev to crosvm through --vfio parameter, vfio module
open this device and get this device's information.
Implement PciDevice trait on this device, then vfio_pci
module could trap guest pci cfg r/w and mmio r/w,
and transfer this operation into kernel vfio.
Currently the relationship of vfio container:group:device are
1:1:1, in the future it could extend to 1Ⓜ️n.
BUG=chromium:992270
TEST=none
Change-Id: I8006ef65022d56197eaeb464811a59db2ce54b9a
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1580458
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Switch to using Reader/Writer which allows buffers to be passed from
the guest as scatter gathers instead of requiring a single contiguous
buffer.
BUG=chromium:993452
TEST=apitrace replay
Change-Id: Ibe212cfa60eae16d70db248a2a619d272c13f540
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1775365
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: David Riley <davidriley@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: David Riley <davidriley@chromium.org>
Make sure all devices join any threads they spawn before returning from
the drop() handler after signaling the exit event.
BUG=chromium:992494
TEST=crosvm exits without errors
Change-Id: I6bc91c32a08f568b041765044caa9aff6f7cf4a9
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1802156
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
The new constructors are shorter and omit the bare `None` in the `anon`
call sites which gave no clues to the reader what the effect of that
`None` was. This should improve readability.
TEST=./build_test
BUG=None
Change-Id: I2e34e7df9a4ccc5da50edf4e963a6a42e3d84b22
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1797188
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Rather than having a get_canceller() function on UsbTransfer, make the
submit function return the canceller. This makes it clear that the
transfer can't be cancelled before it is submitted.
BUG=None
TEST=None
Change-Id: Ice36c3096a1f8a5aafe93b5d5e27eb371183c19f
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1783599
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
This supports virtio disks that depend on multiple file descriptors. All
of the file descriptors are passed to the jail when relevant.
Bug: b/133432409
Change-Id: Idf2e24cd2984c0d12a47a523c13d24c1ba8d173e
Signed-off-by: Cody Schuffelen <schuffelen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1691761
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Use the standardized from_le_bytes() functions rather than the byteorder
crate.
BUG=None
TEST=./build_test
Change-Id: I07a062bf63c5d3ae1e25f403713bf9a1677e8cba
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1761155
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Use the stabilized standard to_le_bytes() and from_le_bytes() functions
rather than the byteorder crate.
BUG=None
TEST=./build_test
TEST=cargo test -p devices virtio_pci_common_config
Change-Id: I4106a41484760b9e7e586de07135874238bcadb0
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1761154
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Fix the last instance of this clippy warning:
warning: passing a unit value to a function
... and remove this warning from the "To be resolved" list in
bin/clippy.
BUG=None
TEST=bin/clippy passes without warnings
Change-Id: Ic1d558e935366d80eeadb96bf1ff951ce50edd5b
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1766623
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Tomasz Jeznach <tjeznach@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
By registering the notify address with Datamatch::AnyLength, KVM is able
to take advantage of KVM_FAST_MMIO_BUS to accelerate eventfd handling.
Seems this doesn't violate the virtio spec because "writing the 16-bit
virtqueue index" refers to the implementation of front-end driver, for
example, Linux's vp_notify() function. While how to handle the VQ index
write in VMM is not covererd by virtio spec. Here Crosvm ensures that
every VQ has dedicated notify address and KVM implements the notification
by eventfd, which should be fine with the spec.
On eve Pixelbook (R77 host kernel 4.4.185), in 5000 samples, on average
the MMIO write vmexit takes 0.96us with fast_mmio enabled, while it takes
3.36us without fast_mmio.
without fast_mmio:
232812.822491: kvm_exit: reason EPT_MISCONFIG rip 0xffffffff986f18ef info 0 0
232812.822492: kvm_emulate_insn: 0:ffffffff986f18ef:66 89 3e (prot64)
232812.822493: vcpu_match_mmio: gva 0xffffb0f4803a1004 gpa 0xe000f004 Write GPA
232812.822493: kvm_mmio: mmio write len 2 gpa 0xe000f004 val 0x1
232812.822495: kvm_entry: vcpu 1
with fast_mmio:
230585.034396: kvm_exit: reason EPT_MISCONFIG rip 0xffffffff9a6f18ef info 0 0
230585.034397: kvm_fast_mmio: fast mmio at gpa 0xe000f004
230585.034397: kvm_entry: vcpu 1
BUG=chromium:993488
TEST=Boot Crostini on eve and run iperf benchmark
TEST=Analysis kernel trace for vmexit handling time
Change-Id: Id1dac22b37490f7026b6c119c85ca9d104a8a3f4
Signed-off-by: Zide Chen <zide.chen@intel.corp-partner.google.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1762282
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
We always advertise VIRTIO_GPU_F_VIRGL and don't activate the
worker thread if Renderer::init fails. We're unlikely to
encounter an platform where we can initialize a GBM device, but
can't initialize virglrenderer.
Since our virtio-gpu implementation depends on virglrenderer, we can
pipe 2D hypercalls to virglrenderer (QEMU does this too, when built
with the --enable-virglrenderer option).
Also remove virgl_renderer_resource_info since it's unlikely to work
with non-Mesa drivers.
BUG=chromium:906811
TEST=kmscube renders correctly (though there's a prior bug in closing
the rendering window -- see chromium:991830)
Change-Id: I7851cd0837fd226f523f81c5b4a3389dc85f3e4f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1743219
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Auto-Submit: Gurchetan Singh <gurchetansingh@chromium.org>
Now that we're not creating EGL images anymore, we can remove
EGL logic.
BUG=chromium:906811
TEST=freecad works without any local Mesa patches
Change-Id: I09db1c828ae1a331eaeae7c66653a49fe42a04bf
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1725451
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Gurchetan Singh <gurchetansingh@chromium.org>
Auto-Submit: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
With YUV support + modifier support coming up, it makes sense to
move GBM allocation inside virglrenderer so we can upstream
our use cases.
In addition, this allows us to use gbm_bo_map(..) for the freecad
issue, which would otherwise be resolved through local patches in
our graphics drivers.
BUG=chromium:906811
TEST=freecad works without Mesa patches
Change-Id: I61db5c58a5bc5a79fda3cec8ad6c322fae6acc9e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1725450
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Auto-Submit: Gurchetan Singh <gurchetansingh@chromium.org>
Crosvm's AC97 device had code that was duplicated between playback and
capture stream creation. Abstract that code out so it can be shared.
BUG=chromium:968724
TEST=aplay /dev/urandom within container
Change-Id: If2fb50a0655656726dd9c6255bc84493e91c04e3
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1749948
Tested-by: Fletcher Woodruff <fletcherw@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Chih-Yang Hsia <paulhsia@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Commit-Queue: Fletcher Woodruff <fletcherw@chromium.org>
Add a new virtio configuration copying function to replace all of the
slightly varying read_config() and write_config() implementations in our
virtio devices. This replaces a lot of tricky bounds-checking code with
a single central implementation, simplifying the devices to a single
call to copy_config() in most cases.
The balloon device is also changed to represent its config space as a
DataInit struct to match most other devices and remove several unwrap()
calls.
BUG=None
TEST=./build_test
TEST=Boot vm_kernel+vm_rootfs in crosvm
TEST=Start Crostini on nami
Change-Id: Ia49bd6dbe609d17455b9562086bc0b24f327be3f
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1749562
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
We don't always shut down the worker threads cleanly, which can lead to a race
when crosvm is exiting. Worker threads that attempt logging to stderr may fail
an expect(), panic, and then panic again trying to write to stderr causing
SIGILL.
Work around this issue for now by using libc's exit, which won't run any
rust-specific cleanup.
BUG=chromium:978319,chromium:992494
TEST=crosvm shuts down without SIGILL/core dumps
Change-Id: I8a99ce8a34220afdf503402d44721a9bea5ec460
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1746830
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Rewrite the virtio block device to use the descriptor Reader/Writer
interfaces - this greatly simplifes the block device code.
This also lets the block device handle arbitrary descriptor layouts,
since the descriptor reader/writer handles that transparently for us.
BUG=chromium:990546
TEST=./build_test
TEST=Boot crosvm with vm_kernel+vm_rootfs on workstation
TEST=Boot full Crostini environment on nami
Change-Id: Ie9a2ba70a6c7ed0ae731660fd991fb88242e275f
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1721371
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Allow use of this helper function in other virtio devices that want to
write virtio descriptor chains as part of their tests.
BUG=chromium:990546
TEST=./build_test
Change-Id: Ib986646dc36b6406c88f20950586e1c665adf167
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1732851
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
This will allow streaming data between a FileReadWriteVolatile and the
descriptor chain Reader/Writer types.
BUG=chromium:990546
TEST=./build_test
Change-Id: Idc97ce99dd1cc340444298f705df4f12e339095d
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1721370
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This allows moving the read/write cursor around within a chain of
descriptors through the standard io::Seek interface.
BUG=chromium:990546
TEST=./build_test
Change-Id: I26ed368d3c7592188241a343dfeb922f3423d935
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1721369
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Add an error type to describe descriptor Errors in more detail.
This lets us return a more accurate error in a later CL in this chain by
adding a VolatileMemoryError variant.
BUG=chromium:990546
TEST=./build_test
Change-Id: I08680d0cb64bfc3667bac7b2ad8a8bc0e78e8058
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1733988
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This change fixes two small warnings in smoke test:
Compiling crosvm_plugin v0.17.0 (/platform/crosvm/crosvm_plugin)
warning: unused import: `std::mem::size_of`
--> devices/src/virtio/input/event_source.rs:292:9
|
292 | use std::mem::size_of;
| ^^^^^^^^^^^^^^^^^
|
= note: #[warn(unused_imports)] on by default
warning: variable does not need to be mutable
--> devices/src/virtio/input/event_source.rs:385:13
|
385 | let mut evt_opt = source.pop_available_event();
| ----^^^^^^^
| |
| help: remove this `mut`
|
= note: #[warn(unused_mut)] on by default
Compiling arch v0.1.0 (/platform/crosvm/arch)
BUG=None
TEST=./wrapped_smoke_test.sh
Pass smoke test. The 2 warnings disappear in the output.
Change-Id: Ib4de48e9586e80087e30411e225265554d5e7a11
Signed-off-by: Jianxun Zhang <jianxun.zhang@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1742921
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
When USB device is detached from kernel driver there might be multiple
pending USB transfers enqued, each completing with TransferStatus::NoDevice.
Once backend device is detached from system it's ok to ignore subsequent
detach request errors in transfer completion handler.
BUG=chromium:987500
TEST=ADB USB device attach/detach cycles with active adb service.
Change-Id: I4026e68df860c483973f51f9787bf3d48d2716b3
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1737471
Tested-by: Tomasz Jeznach <tjeznach@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Tomasz Jeznach <tjeznach@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
The check for validity of a DescriptorChain needs to ensure that
self.len bytes starting from self.addr are valid valid guest memory
addresses. The last byte of that range (assuming self.len > 0) is
self.addr + self.len - 1.
BUG=b/138459777
TEST=run cuttlefish locally with 4.19 kernel
Change-Id: I2eb6e70e099b3849ac1f6cdd0dfeed092c2a2b02
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1728481
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Jorge Moreira Broche <jemoreira@google.com>
Auto-Submit: Jorge Moreira Broche <jemoreira@google.com>
Before this change, setting console=true on a serial port caused that
port to be the one connected to the crosvm process' standard input. By
adding an extra 'stdin' argument to the serial parameters it's
possible to make those concepts independent.
Just as with the console argument, stdin defaults to serial port
1 (ttyS0) when not provided and it's possible to set no serial port
connected to stdin (or set as the console) by defining the first
serial port without the stdin (console) argument.
BUG=b/138616941
TEST=boot debian guest in debian host, boot cuttlefish in debian host
Change-Id: I7273e6860218521073df93a4ad71e31c7da522a5
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1731139
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Auto-Submit: Jorge Moreira Broche <jemoreira@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Zach Reizner <zachr@chromium.org>
- Add allow sched_setscheduler call in seccomp policy
- Change the real time priority constant AUDIO_THREAD_RTPRIO to 10 to match
all other clients' priority.
Run the following commands to test
1. ulimit -r 10
2. crosvm run -r ./vm_rootfs.img -c 1 -m 1024 -s /run --cid 5 --host_ip \
100.115.92.25 --netmask 255.255.255.252 --cras-audio \
--params="snd_intel8x0.inside_vm=1 snd_intel8x0.ac97_clock=48000" \
--mac d2:47:f7:c5:9e:53 ./vm_kernel
3. aplay -Dhw:0,0 -f dat /dev/zero
4. ps -AT -o comm,rtprio | grep crosvm
should see a thread running with rtprio=10
BUG=chromium:983533
BUG=b:138262556
TEST=Test with eve (x86_64) and bob (arm)
Change-Id: Idc3711d03d716741f7cefd9a89b14ae4c20c2033
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1729089
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Chih-Yang Hsia <paulhsia@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Commit-Queue: Chih-Yang Hsia <paulhsia@chromium.org>
This change adds an X11 backend to the gpu_display crate. With this
addition, the virtio-gpu device can display to traditional linux
desktops that only have X11 output.
Change-Id: I86c80cac91ca5bdc97588194a44040273ae69385
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1591572
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Commit-Queue: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Auto-Submit: Zach Reizner <zachr@chromium.org>
The old method of creating a PollContext and calling `add` inside of
`and_then` chains was an ugly way handle the Results that can crop up
after each call. The `build_with` function is equivalent but operates on
a slice which has way less boilerplate.
TEST=./build_test
BUG=None
Change-Id: I8b0d6532680e04c501187397bd211014a2363c25
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1715581
Tested-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Auto-Submit: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Zach Reizner <zachr@chromium.org>
A few places were using the old syntax without `dyn`. Nightly compilers
have started warning more aggressively, so fix up the last of those.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Change-Id: I4df49b4a27a62acfd8c542cec903e4c5b31bedcc
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1715576
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
1.38 nightly started warning about using `...` vs `..=`, update to avoid
the warning.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Change-Id: Ibc3d24c5410b6eed9a1207db21e529ec6a763376
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1715575
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Input devices were using GuestMemory's read_to_memory and
write_from_memory under the (incorrect) assumption that these function
used the io::Read and io::Write traits, when they in fact use AsRawFd.
BUG=b/137138116
TEST=ran cuttlefish in workstation
Change-Id: I7ab1e2d0ab685dd25dcc91e794766c2f210665f7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1700418
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Jorge Moreira Broche <jemoreira@google.com>
Looks like we ended up with two totally different tempdir
implementations: one from CL:520706 and the other from CL:1409705.
This CL consolidates them into one implementation.
BUG=chromium:974059
TEST=tempfile: cargo test
TEST=crosvm: cargo check --all-features
TEST=devices: cargo check --tests
TEST=sys_util: cargo check --tests
TEST=local kokoro
TEST=./build_test
Cq-Depend: chromium:1574668
Change-Id: Id70e963c9986ed2fc5f160819c4a7f9f16092b3b
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1573227
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Now that nothing uses the PCI-to-PCI bridge device type, the compiler
warns that it is never constructed. Mark the PciHeaderType enum to
allow this, since the enum is public and could be constructed outside
this file.
BUG=None
TEST=./build_test
Change-Id: I6832996c4e00a33cc1ba88d97fede65b226cbfc5
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1691239
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
mem::uninitialized is unsafe, and we already replaced most instances of
it with alternate implementations; however, another one slipped in since
then. Replace it with Default::default() as a safe alterantive.
BUG=None
TEST=./build_test
Change-Id: Idacdcb0ebe197cc93fba4b15c3dda774bb56e73e
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1691233
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Currently device impliments PciDevice trait, it will return config
register to bus trait at pci cfg r/w, then BusDevice trait on behave
of device to do actual pci config r/w.
But vfio device need to handle the pci config r/w by itself, as
vfio device need to transfer this request to kernel.
For pci config read, this patch delete PciDevice->config_registers(),
and add PciDevice->read_config_register(), then BusDevice->
config_register_read() call PciDevice->read_config_register(), finally
Device could trap the PciConfig Read.
For pci config write, it is similiar with pci config read. But the
common code is moved into PciConfiguration.
BUG=none
TEST=none
Change-Id: Ie6bd3a8c94f523d6fb1ef3d1e97d087bb0407d9f
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1580457
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Replace use of our custom, patched libusb APIs with the new
libusb_wrap_sys_device() function, which has been submitted to libusb
upstream. This allows us to drop the bindings for the custom APIs (and
will also allow us to drop the libusb patch that introduces them).
For now, keep this path behind the sandboxed-libusb feature to allow
crosvm to build against older libusb versions that do not have the new
API. This should be cleaned up eventually once we are comfortable with
raising the minimum libusb version required.
BUG=b:133773289
TEST=Attach Android device to Linux VM; deploy app via adb
Change-Id: Ie249c6f3f3b4c63210dd163ca7ad03e2de8a8872
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1676601
Tested-by: kokoro <noreply+kokoro@google.com>
The 32-bit write_reg() function for PCI configuration space masked off
non-writable (read-only) bits from the incoming value, but it did not
preserve the original bits from the register; this results in writes to
read-only registers to clear all read-only bits to 0 instead. Preserve
the original value of the read-only bits and add a test to verify that
this works.
BUG=None
TEST=./build_test
Change-Id: Icc67b429f17d519ec4e9090f8e0ce48aaff76491
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1660204
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Each PCI BAR address must be aligned to at least its own size to allow
the BAR sizing mechanism to work properly. Add a check in add_pci_bar()
to enforce this.
BUG=None
TEST=Boot vm_kernel in crosvm
Change-Id: Iee9d866c4982bd79935337682bd50b9205b95024
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1660203
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Each PCI BAR must be aligned to at least its own size to allow the BAR
sizing mechanism to work. Change all BAR allocations to use
allocate_with_align(), specifying the size as the alignment.
In particular, this fixes the alignment of the XHCI BAR, whose size is
larger than a page (the default MMIO allocator alignment).
BUG=None
TEST=Boot vm_kernel in crosvm
Change-Id: Icba03771a896b9b4feae608efdb7685fe24f8b98
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1660202
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
For kvmgt linux guest, intel graphic driver i915 need intel host bridge
located at 0000:00.0, so this patch change the vendor id of 0000:00.0 device
to intel.
BUG=none
TEST=none
Change-Id: I52f2341d25859f2b7d4a3837f4f0c8a4b2443525
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1581139
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Previously, we were using header type 1 (which is meant to be used only
for PCI-to-PCI bridges), which upsets the Linux PCI probing code:
pci 0000:00:00.0: ignoring class 0x060000 (doesn't match header type 01)
Switch to the standard type 0 header instead, which makes the kernel
happy and matches what real hardware uses.
BUG=None
TEST=Boot vm_kernel (Linux 4.19) in crosvm
Change-Id: I33d10bda39edf6d949827963cebbfe66c9147ea2
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1660892
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
The argument order of the new_2d constructor was very odd. That has been
changed to the ordinary x,y,w,h order. Also, each Box3 is checked by
is_empty() before being used, which prevents some degenerate operations
on zero area boxes.
TEST=cargo run -- run --gpu
BUG=None
Change-Id: I6954fa4846f20353517fe81028058b639752d8ea
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1670549
Tested-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: David Riley <davidriley@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Commit-Queue: Zach Reizner <zachr@chromium.org>
Currently the wayland device accesses buffers allocated by the gpu
device via a dedicated socket connection. Upcoming virtual devices like
vdec and camera will also need access to these buffers. Modify the gpu
device so that it can process requests on multiple resource_bridge
sockets.
Each future device that needs access to gpu device buffers should create
a new resource bridge socket pair and add it to the list of sockets that
the gpu device monitors.
The actual interface between the devices is unchanged.
BUG=b:133381367
TEST=run glxgears in a crostini container with and without gpu enabled
Change-Id: I58693881945965071a53653bf4f86681725267d0
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1652876
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Auto-Submit: Chirantan Ekbote <chirantan@chromium.org>
This change adds a convinient interface over DescriptorChain. It hides
the complexity of DescriptorChain and allows to treat it as a pair
of read-only and write-only buffers. In the future, it will also allow
to easily support indirect descriptors.
BUG=chromium:966258
TEST=cargo test --package devices descriptor_utils
TEST=run crosvm without sandbox, share a directory, compare
checksum of shared file between host and guest
Change-Id: I9fb722ee2024c8d7d40f560571ec7d7c454bfc2b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1647370
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Jakub Staroń <jstaron@google.com>
Resolve a couple of minor clippy warnings:
- unneeded return statement
- use `if let` instead of `match` for single pattern destruction
- use `values()` function to iterate over map values
- supress warning about `ptr::null()` as expressed by the comment
BUG=None
TEST=./bin/clippy
TEST=cargo build
Change-Id: Ic4cea94cd3a25a9edf6ef38119de8c46dcfec563
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1646739
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Commit-Queue: Jakub Staroń <jstaron@google.com>
Resolve couple of minor clippy warnings:
- unneeded return statement in last expression of the function
- redundant closure
BUG=None
TEST=./bin/clippy
TEST=cargo build
Change-Id: I602e56289315cb88779c0029d400b24a8180b899
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1646738
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Jakub Staroń <jstaron@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
This enables the full firmware update/reset/use device in application
mode sequence for Edge TPU USB Accelerator.
There is a bit of a UI hiccup: once the firmware update and reset is
complete, the device re-enumerates with a different VID/PID, and the
"Connect to Linux" prompt shows up again. The user must re-affirm that
the device should be connected to Linux to proceed with using the Edge
TPU. This may be unavoidable - I'm not sure if we can tell the
difference between a newly-inserted device and a reset one.
Allowing USBDEVFS_DISCONNECT_CLAIM should be safe, since it can only
operate on file descriptors passed into the xhci device jail.
BUG=chromium:831850
TEST=Run Edge TPU Accelerator demo and verify that it can update FW
Change-Id: I3d61c7bd914830ce25448b1ae4d60e1c16f10aed
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1599881
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Adds support for virtio-pmem device as an alternative for virtio-blk.
Exposing disk image to guest as virtio-blk device results in both guest
and host independently caching the disk I/O. Using virtio-pmem device
allows to mount disk image as direct access (DAX) in the guest and thus
bypass the guest cache. This will reduce memory foodprint of the VMs.
BUG=None
TEST=cargo test
TEST=Boot patched termina kernel in crosvm; mount virtio-pmem device as
DAX and run xfstests.
Change-Id: I935fc8fc7527f79e5169f07ec7927e4ea4fa6027
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1605517
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Commit-Queue: Jakub Staroń <jstaron@google.com>
This manifested itself in a couple places that were turning shared
memory buffers into slices for the purposes of passing these slices to
`Read` and `Write` trait methods.
However, this required the removal of the methods that took `Read` and
`Write` instances. This was a convenient interface but impossible to
implement safely because making slices from raw pointers without
enforcing safety guarantees causes undefined behaviour in Rust. It turns
out lots of code in crosvm was using these interfaces indirectly, which
explains why this CL touches so much.
TEST=crosvm run
BUG=chromium:938767
Change-Id: I4ff40c98da6ed08a4a42f4c31f0717f81b1c5863
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1636685
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Zach Reizner <zachr@chromium.org>
The RequestType::Flush handler correctly uses fsync(), which issues an
fsync to the underlying disk image file. However, the flush timer
(started on write and cancelled if a flush request is executed) was only
calling flush(), which is insufficient when the disk image is a raw file
- it just flushes in-memory buffers and does not issue an fsync.
BUG=None
TEST=Issue writes in crosvm; verify fsync in strace output
Change-Id: I1de8a35615031b5fdf5599dd6b49015d0b245c31
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1632876
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
We don't need schema anymore. Will use bool and custom enums.
BUG=None
TEST=local build and run crosvm
Change-Id: I1396916878f2903b17a75f375aee4eec1ced0583
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1564780
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
These type of requests are not necessarily specific to the virtio-wl,
and other devices (virtio-gpu) may want to use them.
BUG=chromium:924405
TEST=compile
Change-Id: Iad0889da8ab3d23bb2378448fc05e3c840a93d93
Reviewed-on: https://chromium-review.googlesource.com/1626791
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Moves logic of consuming available descriptor heads from AvailIter
to Queue. Adds pop() function to the public interface of the Queue.
This will let us remove the used_desc_heads arrays from various virtio
device implementations because pop() is not borrowing the queue for
the whole loop scope.
BUG=None
TEST=tast run ${IP} vm.CrostiniStartEverything
Change-Id: I8eda48e41b5ec1b2d59f3177435abafb9ad5f3a3
Reviewed-on: https://chromium-review.googlesource.com/1611013
Commit-Ready: Jakub Staroń <jstaron@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
The IN_BUFFER_LEN variable limits the amount of data that will be read
into a single page sized descriptor. The old value for it left room for
the 16 byte header but reserved no space for VFDs. This happens to work
fine if the size of the read data and VFDs did not exceed the buffer
size, but, in rare circumstance, the maximum amount of data would be
read along with a FD getting received, spilling the descriptor and
causing it to fail to write to it. The guest driver does not handle this
gracefully and usually panics due to corruption.
The new value reserves room for the max number of VFDs so that the
descriptors will not end up with too much data.
BUG=chromium:951576
TEST=while true; do
(/opt/google/cros-containers/bin/wayland_demo&);
pkill -f /opt/google/cros-containers/lib/ld-linux-x86-64.so.2;
done
Change-Id: Ic0c1c10f81a91b5e5cd076e3ded8d3cc0564b614
Reviewed-on: https://chromium-review.googlesource.com/1623558
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Transfer requests have a flag called Interrupt on Short Packet (ISP)
that we have been totally ignoring. Now that the control request
execution phases have been rearranged in previous changes, we can
correctly trigger an event when a transfer fills fewer bytes than
requested.
This fixes firmware update on the Edge TPU USB Accelerator (Coral):
https://coral.withgoogle.com/docs/accelerator/get-started/
BUG=chromium:831850
TEST=Run Edge TPU test model from get-started page
Change-Id: I0d21e408a19c2e2eba562362bfe636c75dbb7160
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1593716
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This matches the QEMU CMOS implementation and is used by BIOSes to
determine the valid memory regions to add to the e820 map.
BUG=b:133358982
TEST=Boot u-boot qemu build; observe memory size
Change-Id: I27956bc05738b5dd5b84240d5137cb06846aaab9
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1625330
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
This fixes the Linux serial driver loopback test for the 4th serial port
(COM4, aka /dev/ttyS3).
The default value of the modem status register is always returned in the
current crosvm implementation; however, this doesn't match the expected
value in the loopback mode test used by the Linux kernel 8250 serial
driver. The other 3 serial ports (/dev/ttyS[012]) skip this test
because of the UPF_SKIP_TEST flag in STD_COMX_FLAGS, but the 4th port
uses STD_COM4_FLAGS instead, which doesn't have UPF_SKIP_TEST.
The mapping of MCR to MSR bits is defined in the 16550 UART data sheet:
http://www.ti.com/product/pc16550d
BUG=chromium:953983
TEST=`echo test > /dev/ttyS3` in crosvm
Change-Id: I1b52111235a500fef2dee00c5803a2221a25e0c6
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1620704
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This change allows an output to be set for each serial device for a
guest machine (stdout, syslog, or sink).
BUG=chromium:953983
TEST=FEATURES=test emerge-sarien crosvm; cd sys_util; cargo test;
./build_test; manual testing on x86_64 and aarch_64
Change-Id: I9e7fcb0b296c0f8a5aa8d54b1a74ae801f6badc8
Reviewed-on: https://chromium-review.googlesource.com/1572813
Commit-Ready: Trent Begin <tbegin@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Trent Begin <tbegin@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
If a control request has a DataStage, execute the request during the
data stage so that we can get the actual length of the transferred data.
This will allow the ISP (Interrupt on Short Packets) bit to be
implemented correctly; we need to know the actual length during
processing of the DataStage TRB rather than at the StatusStage as we did
previously. (Note that ISP isn't implemented yet in this change; this
just passes the correct length to xhci_transfer.on_transfer_complete,
which doesn't do anything useful with the length yet in the short
transfer case.)
BUG=chromium:831850
TEST=Test adb on Crostini
Change-Id: I340424269aa139b0d9698f44ce9d3a457f3eb899
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1593715
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Certain control requests need to be intercepted for special handling
rather than being passed through directly to the device. Clean up the
implementation of these intercepted requests by getting rid of the
confusing intermediate analyze_request_setup function and merging it
with the actual handling of each intercepted request in the new
execute_control_transfer function. This keeps the custom handling all
in one place rather than scattered around the file and removes the need
for the extra HostToDeviceControlRequest enum.
Also add a check in get_standard_request to verify that the request is
indeed a standard control request so that the caller does not need to
check.
BUG=chromium:831850
TEST=Test adb on Crostini
Change-Id: I73b1db76941c39f124cfd0f51f14c15017ba9141
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1593714
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
The get_type and get_direction helpers return Options, even though
they can only possibly return a non-None value; all bit patterns of the
fields they are interpreting are defined. Drop the Options and return
the enum values directly to simplify callers and remove dead code.
Fix up a typo ("recipienet" -> "recipient") while we're in the
neighborhood.
BUG=chromium:831850
TEST=Test adb in Crostini
Change-Id: Ie26a1ed1c15f5f17b5ae80be78ce5f8ff51fab28
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1593713
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
The device to host and host to device branches of HostDevice's
handle_control_transfer function are basically identical, differing only
in whether to do a read or write and when to do it. Split this code out
into its own function, execute_control_transfer, to reduce code
duplication and prepare for future changes.
BUG=chromium:831850
TEST=Test adb in crostini
Change-Id: Ic659f18ca97e2c1c71f67f3543096fe69228969a
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1593712
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Rather than acquiring the lock twice, lock it once and hold it while
doing the check and potential follow-up call to interrupt(). This looks
like it could be a race to me, but I don't know if it can actually cause
problems in practice. In any case, it's better to only acquire the lock
once.
BUG=chromium:831850
TEST=Test adb in Crostini
Change-Id: Id7aa76e543cd5b858faf128f516e8d63e27cf3e7
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1592579
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Set the name of the thread created to run the Xhci controller event loop
so that it can be identified more easily in a debugger.
BUG=None
TEST=Attach to running crosvm with gdb and verify 'info threads' name
Change-Id: Id73a580b35231ec7fa7aec5bd51027d32e483bff
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1594192
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
The UsbHub::try_detach function, which is only called from the libusb
hotplug callback when devices are removed, calls into
port.get_backend_device(), which acquires the backend_device lock, and
then calls port.detach(), which also tries to acquire the backend_device
lock, while still holding onto the backend_device. This clearly leads to
a deadlock.
Add an extra block in try_detach to keep the backend_device lock scoped
so that it is dropped before calling port.detach().
BUG=chromium:958117
TEST=Hot remove usb device from Crostini; verify it is gone in lsusb
Change-Id: Ibbbf68623390e3d25576f544b815c2a5607934fc
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1594158
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
1. Removed for device slot reset and evaluate context. The verification was
unnecessary and may cause some guest kernel operations to fail.
2. The context was updated after dequeue pointer set
3. Reset device when it's attached.
4. Add seccomp rules to allow the above reset.
The verification was copied from another implementation which works for
adb, but does not work with serial devices. The verification is also not
part of the spec, so we removed it here.
BUG=b:131336977
TEST=local build and test
Change-Id: Ifd7994ff5512346d1bab27654e60c97a602da8a6
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Zach Reizner <zachr@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1558934
Tested-by: kokoro <noreply+kokoro@google.com>
Originally, crosvm would list details about an attached usb device for a
given port. This change allows getting details about multiple ports at
once. This is intended to simplify command line usage and downstream
consumers like concierge.
TEST=various vmc commands
Chrome UI for handling USB devices
BUG=chromium:831850
Change-Id: I55681a7fea7425c897a22a579dcc15567683ef54
Reviewed-on: https://chromium-review.googlesource.com/1529765
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Extracts BalloonAdjust from VmRequest into BalloonControlCommand.
BUG=None
TEST=cargo test
TEST=cargo test --package msg_socket
TEST=cargo test --package devices
TEST=cargo test --package vm_control
TEST=tast -verbose run ${IP} vm.CrostiniStartEverything
Change-Id: Ia9f5778c37c8fd4fa560df413134d1b441142f64
Reviewed-on: https://chromium-review.googlesource.com/1565298
Commit-Ready: Jakub Staroń <jstaron@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
A few files were missing license blurbs at the top, so update them all
to include them.
BUG=none
TEST=none
Change-Id: Ida101be2e5c255b8cffeb15f5b93f63bfd1b130b
Reviewed-on: https://chromium-review.googlesource.com/1577900
Commit-Ready: Stephen Barber <smbarber@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Fix up the Display impl for ExecuteError so that it's clear which
direction data is moving for the Read and Write variants.
BUG=None
TEST=cargo build
Change-Id: Ide4ea5cb453e4d7f6bd2812a1696df96daec511b
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1574963
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Add capture support in AC'97 PCI device. Only capture at 48kHz is
supported.
BUG=chromium:932268
TEST=cargo test -p device start_capture
TEST=Run crosvm with `--cras-audio` option to run a guest vm then test
audio capture by command
$ arecord -D hw:0,0 -r 48000 -f dat -c 2 /tmp/test.raw
Change-Id: Ie3aab1004695f0df607fef8fc337fa58cb723b65
Reviewed-on: https://chromium-review.googlesource.com/1573600
Commit-Ready: Chih-Yang Hsia <paulhsia@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
AddressAllocator now maintains a HashMap<Alloc, (u64, u64, u64)>,
which uniquely maps a Allocation enum (e.g: PciBar(bus, dev, bar),
GpuRenderNode, etc...) to it's address, size, and human-readable tag
/ description.
The interface has also been modified to use Error instead of Option.
Aside from improving debugging, tracking allocations will have
numerous uses in the future. For example, when allocating guest memory
over VmControl sockets, it will be possible to restrict allocations to
pre-allocated slices of memory owned by the requesting device.
To plumb through PCI information to PCI devices, this CL necessitated
the addition of a PciDevice method called `assign_bus_dev`, which
notifies PCI devices of their uniquely assigned Bus and Device numbers.
BUG=chromium:936567
TEST=cargo test -p resources && cargo build --features="gpu gpu-forward"
Change-Id: I8b4b0e32c6f3168138739249ede53d03143ee5c3
Reviewed-on: https://chromium-review.googlesource.com/1536207
Commit-Ready: Daniel Prilik <prilik@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
As described in:
https://doc.rust-lang.org/edition-guide/rust-2018/ownership-and-lifetimes/default-match-bindings.html
which also covers the new mental model that the Rust Book will use for
teaching binding modes and has been found to be more friendly for both
beginners and experienced users.
Before:
match *opt {
Some(ref v) => ...,
None => ...,
}
After:
match opt {
Some(v) => ...,
None => ...,
}
TEST=cargo check --all-features
TEST=local kokoro
Change-Id: I3c5800a9be36aaf5d3290ae3bd3116f699cb00b7
Reviewed-on: https://chromium-review.googlesource.com/1566669
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Still TODO: Interrupt routing (and tests for that).
BUG=chromium:908689
TEST=Unit tests in file. Integration testing is blocked on rest of split-irqchip being implemented.
Change-Id: I08c187c44e49889ffc47322ede0f1223c6265757
Reviewed-on: https://chromium-review.googlesource.com/1565306
Commit-Ready: Miriam Zimmerman <mutexlox@chromium.org>
Tested-by: Miriam Zimmerman <mutexlox@chromium.org>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
AddressRanges' name doesn't suggest that it's a SystemAllocator builder.
This CL renames it to SystemAllocatorBuilder, and adds a
SystemAllocator::builder() that removes the need to have a separate
import for the Builder.
A minor change, but it cleans up the interface a bit.
BUG=chromium:936567
TEST=cargo test -p resources && cargo build
Change-Id: I6d14368490c0d3c4018858f541e4ae5390995878
Reviewed-on: https://chromium-review.googlesource.com/1540398
Commit-Ready: Daniel Prilik <prilik@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Only allocate using minigbm if scanout bind is request (which can
indicate that the buffer is to be shared until a proper virgl bind flag
for shared is available), but if that fails because the format is not
supported for scanout, retry the minigbm allocation with the scanout
flag.
BUG=chromium:945033
TEST=None
Change-Id: Ib99bf01c8b9c2a98b1c0d1a8592d5f7c6e1aa859
Reviewed-on: https://chromium-review.googlesource.com/1569025
Commit-Ready: David Riley <davidriley@chromium.org>
Tested-by: David Riley <davidriley@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Before the new borrow checker in the 2018 edition, we sometimes used to
have to manually insert curly braced blocks to limit the scope of
borrows. These are no longer needed.
Details in:
https://doc.rust-lang.org/edition-guide/rust-2018/ownership-and-lifetimes/non-lexical-lifetimes.html
TEST=cargo check --all-features
TEST=local kokoro
Change-Id: I59f9f98dcc03c8790c53e080a527ad9b68c8d6f3
Reviewed-on: https://chromium-review.googlesource.com/1568075
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Suppressing the lint locally because by the author's and reviewers'
judgement this was the clearest way to write this code. The lint is
still valuable for catching mistakes in copied and pasted code
elsewhere.
TEST=bin/clippy
Change-Id: I77477fce51571220fd6259072519b31764a15aeb
Reviewed-on: https://chromium-review.googlesource.com/1566737
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
In Rust 2018 edition, `extern crate` is no longer required for importing
from other crates. Instead of writing:
extern crate dep;
use dep::Thing;
we write:
use dep::Thing;
In this approach, macros are imported individually from the declaring
crate rather than through #[macro_use]. Before:
#[macro_use]
extern crate sys_util;
After:
use sys_util::{debug, error};
The only place that `extern crate` continues to be required is in
importing the compiler's proc_macro API into a procedural macro crate.
This will hopefully be fixed in a future Rust release.
extern crate proc_macro;
TEST=cargo check
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
TEST=local kokoro
Change-Id: I0b43768c0d81f2a250b1959fb97ba35cbac56293
Reviewed-on: https://chromium-review.googlesource.com/1565302
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
Macros were previously imported through `#[macro_use] extern crate`,
which is basically a glob import of all macros from the crate. As of
2018 edition of Rust, `extern crate` is no longer required and macros
are imported individually like any other item from a dependency. This CL
fills in all the appropriate macro imports that will allow us to remove
our use of `extern crate` in a subsequent CL.
TEST=cargo check --all-features --tests
TEST=kokoro
Change-Id: If2ec08b06b743abf5f62677c6a9927c3d5d90a54
Reviewed-on: https://chromium-review.googlesource.com/1565546
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
I find that imports get disorienting when they refer to super::super or
beyond and are better written as relative to the crate root.
TEST=cargo check --all-features --tests
Change-Id: I96dfd09a2784046669ae57a05f83582203a9c29d
Reviewed-on: https://chromium-review.googlesource.com/1565727
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
The gpu_buffer, gpu_display, and gpu_renderer refer to crates outside of
the devices crate. Typically importing from other crates is written as:
use name_of_crate::path::to::ThingToImport;
TEST=cargo check --features gpu
Change-Id: Ic7b1a3fa6b4a06fca7f3e9ed09cbd2a9982279cc
Reviewed-on: https://chromium-review.googlesource.com/1565726
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
The devices crate imports things from usb_util which is a separate
crate. Importing from a crate normally looks like:
use name_of_crate::path::to::ThingToImport;
In the case it would be e.g.:
use usb_util::hotplug::UsbHotplugHandler;
Importing these things through crate::usb::usb_util is unnecessary.
TEST=cargo check
Change-Id: I70554639a71b2423c1e13a30361d5f9d92e9d9a9
Reviewed-on: https://chromium-review.googlesource.com/1565725
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jingkui Wang <jkwang@google.com>
Separated out of CL:1513058 to make it possible to land parts
individually while the affected crate has no other significant CLs
pending. This avoids repeatedly introducing non-textual conflicts with
new code that adds `use` statements.
TEST=cargo check
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
Change-Id: I964a198b54dfa7b98fa2f49a404fda3d09c0f44f
Reviewed-on: https://chromium-review.googlesource.com/1519693
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
To avoid wasting time re-sorting these things (CL:1492612).
https://docs.rs/remain
Disclaimer: I wrote the macro.
This CL adds #[sorted] attributes to those Error enums that seemed to
have made some effort to be in sorted order.
TEST=cargo check
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
TEST=emerge-nami crosvm
TEST=local kokoro
CQ-DEPEND=CL:1524247
Change-Id: I89685ced05e2f149fa189ca509bc14c70aebb531
Reviewed-on: https://chromium-review.googlesource.com/1515998
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
This change implements service_irq, end_of_interrupt, and just enough to
add some basic tests for those.
Still TODO: Interrupt routing (and tests for that) and tests that
require additional functionality.
BUG=chromium:908689
TEST=Unit tests in file. Integration testing is blocked on rest of split-irqchip being implemented.
Change-Id: Ia8418f9a8bec92b53d99cdafb92f05f82eafa2b1
Reviewed-on: https://chromium-review.googlesource.com/1558935
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Miriam Zimmerman <mutexlox@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
This de-duplicates the two separate build.rs files dealing with proto
compilation. The trunks interface.proto will be exposed under
protos::trunks and the plugin proto will be exposed under protos::plugin.
BUG=none
TEST=cargo check
TEST=cargo check --features tpm
TEST=cargo check --features plugin
TEST=cargo check --features tpm,plugin
TEST=FEATURES=test emerge-nami crosvm
TEST=FEATURES=test USE=crosvm-tpm emerge-nami crosvm
TEST=FEATURES=test USE=crosvm-plugin emerge-nami crosvm
TEST=FEATURES=test USE='crosvm-tpm crosvm-plugin' emerge-nami crosvm
TEST=local kokoro
CQ-DEPEND=CL:1553971
Change-Id: I203b654a38e9d671a508156ae06dfb6f70047c4f
Reviewed-on: https://chromium-review.googlesource.com/1556417
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Host/device sockets are now created as a pairs of MsgSockets instead of UnixSeqpacket sockets.
BUG=chromium:950663
TEST=cargo check
TEST=cargo test
Change-Id: I8f61a711fe3c2547bf5d18fcfa23bfd0dc0ef5fd
Reviewed-on: https://chromium-review.googlesource.com/1559041
Commit-Ready: Jakub Staroń <jstaron@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Jakub Staroń <jstaron@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
These are import paths in new code added since CL:1513054 that need to
be made compatible with 2018 edition's treatment of paths.
TEST=cargo check
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
Change-Id: Icb3ecf2fb2015332e0c03cdc22bff2ecab2c40df
Reviewed-on: https://chromium-review.googlesource.com/1559264
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
This may help reduce cases of conflicts between independent CLs each
appending a dependency at the bottom of the list, of which I hit two
today rebasing some of my open CLs.
TEST=cargo check --all-features
Change-Id: Ief10bb004cc7b44b107dc3841ce36c6b23632aed
Reviewed-on: https://chromium-review.googlesource.com/1557172
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Found by running: `cargo rustc -- -D bare_trait_objects`
Bare trait objects like `&Trait` and `Box<Trait>` are soft-deprecated in
2018 edition and will start warning at some point.
As part of this, I replaced `Box<Trait + 'static>` with `Box<dyn Trait>`
because the 'static bound is implied for boxed trait objects.
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
TEST=local kokoro
Change-Id: I41c4f13530bece8a34a8ed1c1afd7035b8f86f19
Reviewed-on: https://chromium-review.googlesource.com/1513059
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
The PIC device that this commit provides isn't quite complete: It needs to
interact with a userspace APIC in order to properly route interrupts,
but crosvm does not yet have a userspace APIC. In the interest of not
making this CL too much larger, the userspace APIC implementation will
come in a future CL.
BUG=chromium:908689
TEST=Unit tests in file. Integration testing is blocked on rest of split-irqchip being implemented.
Change-Id: Id1f23da12fa7b83511a2a4df895b0cfacdbc559e
Reviewed-on: https://chromium-review.googlesource.com/1475057
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Miriam Zimmerman <mutexlox@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Prior to this change empty command buffers would generate errors and syslogs.
BUG=None
TEST=glbench nop_virtgpu_execbuffer test
Change-Id: I456fb342c945beebe121e22543bd93fe41cc5cbe
Reviewed-on: https://chromium-review.googlesource.com/1532796
Commit-Ready: David Riley <davidriley@chromium.org>
Tested-by: David Riley <davidriley@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
We were lucky that adb does not trigger this code path, but Arduino do.
BUG=None
TEST=local build, deploy and run
Change-Id: I0cf02c5de0a73af4e5cb6f5b668cef6606ed166b
Reviewed-on: https://chromium-review.googlesource.com/1542032
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Jingkui Wang <jkwang@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Set up the infrastructure for reporting block size in the virtio-blk
device model. For now, we'll keep reporting SECTOR_SIZE (512), which is
the default block size that is assumed if we don't report it. This
prepares us to easily switch the reported block size in the future.
BUG=chromium:942700
TEST=Boot Crostini on nami with an existing VM and container
Change-Id: I983817743c40e8278fe6cb9a10498011a8887ec9
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1526334
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Checks for the IFF_NO_PI and IFF_VNET_HDR flags, failing if those are
not set.
Sets the offload and vnet header sizes to the required values, instead
of trusting the values on the interface.
Bug=b/128686192
Change-Id: Ibbbfbf3cdedd6e64cdcfb446bcdfb26b4fd38395
Reviewed-on: https://chromium-review.googlesource.com/1526771
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
VirtioPciCap omits the `cap_vndr` and `cap_next` fields from it's
definition, deferring the instantiation of these bytes to the
add_capability method in PCI configuration. There is even a
comment on add_capability that mentions this omission.
Unfortunately, comments tend not to be read, and mismatches between
the linux headers and crosvm structures can result in some subtle
and tricky to debug bugs, especially when implementing other types
of virtio capabilties that subsume VirtioPciCap.
Case in point, when implementing the VirtioPciShmCap (used by
virtio-fs), this subtle mismatch resulted in a bug where an
additional 2 bytes of padding were inserted between the `cap` member
and the `offset_hi` member (see CL:1493014 for the exact struct).
Since the cap_len field was instantiated using mem::sizeof Self, the
additional padding just-so-happened to be the perfect ammount to sneak
past the sanity checks in add_capabilities. The bug manifested itself by
shifting over the length_hi field by 16 bits, resulting in much larger
than expected cache sizes.
This CL brings the VirtioPciCap structures in-line with their
linux/virtio_pci.h counterparts, marking the structures as repr(C) (as
opposed to repr(packed)) and leaving the cap_vndr and cap_next members
in the struct, noting that they will be automatically populated in
add_capability.
BUG=chromium:936567
TEST=cargo test -p devices, boot vm
Change-Id: Ia360e532b58070372a52346e85dd4e30e81ace7a
Reviewed-on: https://chromium-review.googlesource.com/1540397
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Removes an unnecessary Option from the return type.
Also added a note about moving PCI methods out of the VirtioDevice
trait, as the trait shouldn't be tied to any particular transport layer.
BUG=chromium:936567
TEST=cargo build --features=gpu
Change-Id: I2c75c830bbe2d2b4a15461e8497535c526775bbe
Reviewed-on: https://chromium-review.googlesource.com/1536206
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Using non-linear buffer seems to be safe based on the apps I've
tested. This is similiar to the ARC++ use case, which also doesn't
explicitly send modifiers to Chrome.
BUG=chromium:945033
TEST=clear_clear goes from 980 mpixels --> 6797.90 mpixels
on Nami
Change-Id: I2dcb78366c2d2d83d64bb23f6da1f07c8747819c
Reviewed-on: https://chromium-review.googlesource.com/1538463
Commit-Ready: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Riley <davidriley@chromium.org>
Reviewed-by: Chia-I Wu <olv@google.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Building off CL:1290293
Instead of having a seperate GuestMemoryManager, this adds SharedMemory
as a Arc'd member of GuestMemory. This is nice since it removes the need
to plumb the Manager struct throughout the codebase.
BUG=chromium:936567
TEST=cargo test -p sys_util
Change-Id: I6fa5d73f7e0db495c2803a040479818445660345
Reviewed-on: https://chromium-review.googlesource.com/1493013
Commit-Ready: Daniel Prilik <prilik@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
None of instances of EventHandler::on_event actually used the fd. The
PollfdChangeHandler::remove_poll_fd callback fabricated a potentially
valid fd (0), which went undetected because nobody used it.
Additionally, using RawFds almost always requires unsafe and should be
avoided.
CQ-DEPEND=CL:1522214
BUG=chromium:831850
TEST=cargo test
Change-Id: I095edbcad317e4832b1fb29fd08d602fbde4fd5d
Reviewed-on: https://chromium-review.googlesource.com/1525135
Commit-Ready: Jingkui Wang <jkwang@google.com>
Tested-by: Jingkui Wang <jkwang@google.com>
Reviewed-by: Jingkui Wang <jkwang@google.com>
This cleans up some feature flag plumping for libusb sandboxing as well.
BUG=chromium:831850
TEST=cargo test
CQ-DEPEND=CL:1512762
Change-Id: Ic70784db204ddced94498944b021bcb7dd708bb1
Reviewed-on: https://chromium-review.googlesource.com/1522214
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Jingkui Wang <jkwang@google.com>
Reviewed-by: Jingkui Wang <jkwang@google.com>
Device can be assigned to slot. Command ring handles usb commands,
transfer ring handles usb transfers.
CQ-DEPEND=CL:1510819
BUG=chromium:831850
TEST=cargo test
Change-Id: Ib0836ee518d1c7a3e902630c7ea04e29b9496c80
Reviewed-on: https://chromium-review.googlesource.com/1510820
Commit-Ready: Jingkui Wang <jkwang@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Those are bridges between xhci and backend.
CQ-DEPEND=CL:1510818
BUG=chromium:831850
TEST=cargo test
Change-Id: I04feab449d48b0c908aeebfda08d1869239cbe6f
Reviewed-on: https://chromium-review.googlesource.com/1510819
Commit-Ready: Jingkui Wang <jkwang@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
for ring buffer, guest kernel is producer and crosvm is consumer
CQ-DEPEND=1510817
BUG=chromium:831850
TEST=cargo test
Change-Id: Ib62d2b42de1a77ff71ca0e2a0066feacc56dddc1
Reviewed-on: https://chromium-review.googlesource.com/1510818
Commit-Ready: Jingkui Wang <jkwang@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This CL adds some necessary constants and types, as well as a few
skeleton function declarations, for an IOAPIC device.
I'm sending this CL first in the interest of minimizing CL size and
making future CLs easier to review.
TEST=Built
BUG=chromium:908689
Change-Id: Ib8ae37e0092c31d7cb8073070f9592baed236323
Reviewed-on: https://chromium-review.googlesource.com/1520809
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: Miriam Zimmerman <mutexlox@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
Implementing this macro by ignoring the args and expanding to nothing
makes it possible to pass invalid args like `usb_debug!("{}")`. Use `if
false` instead to ensure that the args are valid formatter args.
As part of this, fix a call to a non-existent function inside one of the
usb_debug invocations.
TEST=cargo check devices
Change-Id: Id82dad7b021060dce7b4d3b828bbd21aaa6ef410
Reviewed-on: https://chromium-review.googlesource.com/1518730
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jingkui Wang <jkwang@google.com>
The regs_reg_overlap() test is a panic test but the function that it is
testing only uses debug_asserts so the test will fail if debug
assertions are disabled. Only run the test when debug assertions are
enabled.
BUG=chromium:940668
TEST=`FEATURES=test USE=-cros-debug emerge-nami crosvm`
Change-Id: Ie722cb49908ae4c4a9ecc5f248a6ec25fbcc05c9
Reviewed-on: https://chromium-review.googlesource.com/1518729
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jeffrey Kardatzke <jkardatzke@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
This is an easy step toward adopting 2018 edition eventually, and will
make any future CL that sets `edition = "2018"` this much smaller.
The module system changes in Rust 2018 are described here:
https://doc.rust-lang.org/edition-guide/rust-2018/module-system/path-clarity.html
Generated by running:
cargo fix --edition --all
in each workspace, followed by bin/fmt.
TEST=cargo check
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
Change-Id: I000ab5e69d69aa222c272fae899464bbaf65f6d8
Reviewed-on: https://chromium-review.googlesource.com/1513054
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
Usb implementation will use usb_debug to log verbose debug logs. It will
be turned off by default.
BUG=chromium:831850
TEST=local build
Change-Id: Ieaa22e57e624841a5f78a6a1a1874351bbd77a86
Reviewed-on: https://chromium-review.googlesource.com/1510813
Commit-Ready: Jingkui Wang <jkwang@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
event_loop: event loop based on poll context.
async_job_queue: queue a job, it will be invoked on event loop. This
could be used to invoke a function without holding any locks.
BUG=chromium:831850
TEST=local build
Change-Id: Iab61ac43221bf5d635a0138073d7f88401e5ab07
Reviewed-on: https://chromium-review.googlesource.com/1509852
Commit-Ready: Jingkui Wang <jkwang@google.com>
Tested-by: Jingkui Wang <jkwang@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
virtio devices should be able to specify capabilities
BUG=chromium:936567
TEST=boot vm
Change-Id: I049f9967eb59a7904528fff5aea844e30c636e28
Reviewed-on: https://chromium-review.googlesource.com/1493012
Commit-Ready: Daniel Prilik <prilik@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Very similar to the trackpad device, it has the INPUT_PROP_DIRECT
property and does not support any buttons, just touch events.
Change-Id: I2c963013e402ff2aa1b4b529c6c494dd57f4add9
Reviewed-on: https://chromium-review.googlesource.com/1509697
Commit-Ready: Jorge Moreira Broche <jemoreira@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
underflow occurs when configuring a 64 bit register with a <33 bit
address.
BUG=chromium:924405
TEST=boot VM
Change-Id: I53a309b7bff3c91012bacb12d9fc9f8ceed68699
Reviewed-on: https://chromium-review.googlesource.com/1493011
Commit-Ready: Daniel Prilik <prilik@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
u64 register callback will only be invoked when the write is done.
BUG=chromium:831850
TEST=local build
CQ-DEPEND=CL:1509514
Change-Id: Id0be69535898fdcc4ba24d3151df7a5107a2725b
Reviewed-on: https://chromium-review.googlesource.com/1509515
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Jingkui Wang <jkwang@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Then we don't need to unwrap
BUG=chromium:831850
TEST=cargo test
CQ-DEPEND=CL:1506828
Change-Id: I4200ea6351d61df1974e5e4c8583e783b21ea0eb
Reviewed-on: https://chromium-review.googlesource.com/1509514
Commit-Ready: Zach Reizner <zachr@chromium.org>
Tested-by: Jingkui Wang <jkwang@google.com>
Reviewed-by: Jingkui Wang <jkwang@google.com>
Enough failure cases have been added to `add_pci_bar` and
`add_pci_capabilities` that they should return unique errors instead of
an `Option`.
BUG=none
TEST=cargo test in devices
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Change-Id: Ice2a06d2944011f95707f113f9d709da15c90cfe
Reviewed-on: https://chromium-review.googlesource.com/1497740
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Check that the device can be created. This test would have caught the
bug with adding pci bars.
Change-Id: Ib0cc2edf0d8d1b2d95d9c3588ac325b5da886603
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1497738
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
The description method is deprecated and its signature forces less
helpful error messages than what Display can provide.
BUG=none
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
Change-Id: I27fc99d59d0ef457c5273dc53e4c563ef439c2c0
Reviewed-on: https://chromium-review.googlesource.com/1497735
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
When switching to PciBarConfiguration, the set_* functions were changed
to return self. The self for register index 1 was not being used.
TEST=boot a VM and check that there isn't a pci bus creation error.
Change-Id: I8d5162c70fcec1159a6283e26e744d0c3c76b804
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1497737
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
When running in multiprocess mode, such as on a device, TPM state gets
placed in /run/vm/tpm.{pid} (e.g. /run/vm/tpm.22726) where pid is the
pid of the original crosvm process. The TPM simulator will write a
single file called NVChip of size 16384 bytes into this directory. The
directory and NVChip file will have uid and pid set to crosvm.
When running without multiprocess mode / without minijail / probably in
cros_sdk, TPM state is placed in /tmp/tpm-simulator as before. The
/run/vm directory is not present under cros_sdk.
Will follow up with a separate CL to remove the TPM state directory at
crosvm exit.
Tested by running the following on a grunt board (Barla) in dev mode:
sudo crosvm run \
--root rootfs.ext4 \
--socket crosvm.sock \
--seccomp-policy-dir seccomp \
--software-tpm \
-p init=/bin/bash \
-p panic=-1 \
vmlinux.bin
and confirming that /dev/tpm0 and /dev/tpmrm0 are present in the VM.
BUG=chromium:921841
TEST=manual testing on grunt
Change-Id: I1868896b9eb6f510d8b97022ba950b3604d9d40b
Reviewed-on: https://chromium-review.googlesource.com/1496910
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
