When a workspace's working-copy commit is updated from another
workspace, the workspace becomes "stale". That means that the working
copy on disk doesn't represent the commit that the repo's view says it
should. In this state, we currently automatically it to the desired
commit next time the user runs any command in the workspace. That can
be undesirable e.g. if the user had a slow build or test run started
in the working copy. It can also be surprising that a checkout happens
when the user ran a seemingly readonly command like `jj status`.
This patch makes most commands instead error out if the working copy
is stale, and adds a `jj workspace update-stale` to update it. The
user can still run commands with `--no-commit-working-copy` in this
state (doing e.g. `jj --no-commit-working-copy rebase -r @ -d @--` is
another way of getting into the stale-working-copy state, by the way).
Also allows several paths to be specified. By default, `jj resolve`
will find the first conflict that matches provided paths (if any)
and try to resolve it.
It seems like I forgot to update the `jj status` output when I decided
(years ago?) that the changes in a commit should always be compared to
the auto-merged parents. I was very confused before I realized that
`jj status` was showing the diff summary against the first parent. I
suppose the fact that `jj status` lists only one parent should have
been a hint. Thanks to ilyagr@ for finding this odd behavior. This
patch fixes it by making the command list all parents, and changes the
diff summary to be against the auto-merged parents.
If this new option is not specified, we start with empty output
file and trust the merge tool did a complete merge no matter
what the file contains.
Includes tests.
This command uses an external merge tool to resolve conflicts
simple enough that they can be resolved with a 3-way merge.
This commit provides a very basic version of `jj resolve` that
is hardcoded to use vimdiff.
This also slightly changes the errors of the Diff Editor, so that
both the diff editor and `jj resolve can share an error type.
Because a unary negation node '~y' is more primitive than the corresponding
difference node 'x~y', '~y' is easier to deal with while rewriting the tree.
That's the main reason to add RevsetExpression::NotIn node.
As we have a NotIn node, it makes sense to add an operator for that. This
patch reuses '~' token, which I feel intuitive since the other set operators
looks like bitwise ops. Another option is '!'.
The unary '~' operator has the highest precedence among the set operators,
but they are lower than the ranges. This might be counter intuitive, but
useful because a prefix range ':x' can be negated without parens.
Maybe we can remove the redundant infix operator 'x ~ y', but it isn't
decided yet.
I can't see any reason the user would want to specify revisions
matching the empty string, so let's disallow it. I created a custom
type for revision arguments instead of repeating `value_parser =
NonEmptyStringValueParser::new()`.
If the user creates a branch with an empty name, it seems very likely
to be an accident. Let's help them realize that by erroring out.
I didn't add the same checks to `jj branch delete`, since that would
make it hard to delete a branch with an empty name from existing
repos.
Function parameters are processed as local symbols while substituting
alias expression. This isn't as efficient as Mercurial which caches
a tree of fully-expanded function template, but that wouldn't matter in
practice.
Let's acknowledge everyone's contributions by replacing "Google LLC"
in the copyright header by "The Jujutsu Authors". If I understand
correctly, it won't have any legal effect, but maybe it still helps
reduce concerns from contributors (though I haven't heard any
concerns).
Google employees can read about Google's policy at
go/releasing/contributions#copyright.
Aliases are loaded at WorkspaceCommandHelper::new() as it's easier to warn
invalid declarations there. Not all commands use revsets, but many do, so
I think it's okay to always pay the loading cost. Parsing the declaration
part (i.e. a symbol) should be fast anyway.
The nested error message isn't super readable, but seems good enough.
Config syntax to bikeshed:
- naming: [revset-alias] vs [revset-aliases] ?
- function alias will need quotes: 'f(x)' = 'x'
This adds a warning whenever export to the backing Git repo fails,
whether it's by an explicit `jj git export` or an automatic export. It
might be too spammy to print the message after every failed command in
the colocated case, but let's try it and see.
I'm thinking of adding alias expansion at this stage, and it would be a bit
tedious to pass around mutable context by function parameter. So let's reduce
the number of the intermediate functions.
This also produces a better error message.
It would be nice to be able to use snapshot testing and not have to
parse the output of `jj op log`. This patch lets us do that by
providing a new environment variable and config for overriding the
timestamps. Unlike `operation.hostname` and `operation.username`,
these are only meant for tests.
This makes the tests more hermetic, even though I don't think the
default values (taken from `whoami`) can break any tests (then we
would have already seen them break). Now we just need to make the
operation log's timestamps predictable and then we can start using
operation IDs in snapshot tests.
In the test case `test_branch_mutually_exclusive_actions`, we weren't actually testing anything useful, because the interface has since changed to use subcommands instead of options. The test has been deleted in this commit, and `TestEnvironment::jj_cmd_cli_error` has been changed to return a `#[must_use]` `String` representing stderr. I also added `#[must_use]` to `TestEnvironment::jj_cmd_failure` while I was here.
We currently get the hostname and username from the `whoami` crate. We
do that in lib crate, without giving the caller a way to override
them. That seems wrong since it might be used in a server and
performing operations on behalf of some other user. This commit makes
the hostname and username configurable, so the calling crate can pass
them in. If they have not been passed in, we still default to the
values from the `whoami` crate.
We have talked about showing the commit ID only for divergent changes
because it's generally easier to work with the change ID, and it's
less likely to result in a divergent change. However, it's useful to
have the commit ID available for pasting into e.g. a commit message or
the GitHub UI. To try to steer users towards using the change ID, this
commit moves the commit ID off to the right in the log output.
I put it just after the "divergent" field, because that makes it close
to how I imagine it would look if we decided to hide the commit ID
except for divergent changes. I was thinking that could be rendered as
"divergent (abc123)". So if we add config to hide the commit ID, then
it would be rendered almost the same for divergent commits (just with
the added parentheses). It would also make sense to replace the
"divergent" field by a question mark on the change ID, since change
IDs basically behave like branches. If we do that, then the placement
of the commit ID I picked in this commit does not make sense.
Given how easy this was, I can't believe I didn't make the change
sooner.
I haven't updated the screenshots in the readme because I plan to make
some further changes to the default template. I'll update them after
those changes.
When we export branches to Git, we didn't update our own record of
Git's refs. This frequently led to spurious conflicts in these refs
(e.g. #463). This is typically what happened:
1. Import a branch pointing to commit A from Git
2. Modify the branch in jj to point to commit B
3. Export the branch to Git
4. Update the branch in Git to point to commit C
5. Import refs from Git
In step 3, we forgot to update our record of the branch in the repo
view's `git_refs` field. That led to the import in step 5 to think
that the branch moved from A to C in Git, which conflicts with the
internal branch target of B.
This commit fixes the bug by updating the refs in the `MutableRepo`.
Closes#463.
As I said in the previous patch, I don't know why I made the initial
export to Git a no-op. Exporting everything makes more sense to
(current-)me. It will make it slightly easier to skip exporting
conflicted branches (#463). It also lets us remove a `jj export` call
from `test_templater.rs`.
We had very little testing of the colocated case, so let's add a bit
more before I start working on this code in coming patches. This
includes a test for #463.
Several lines of red text can be overwhelming, and makes it harder to
tell the hint from the error. Let's separate the hint from the error
instead. This matches what hg does. Having the hints separated out
also means that we could have a single config to turn them off.
It's useful to know when you've modified a branch that exists on a
remote. A typical case is when you have pushed a branch to a remote
and then rewritten it. This commit adds an indication in the
`branches` template keyword. A branch that needs to be pushed to a
remote now has a `*` at the end (similar to how conflicted branches
have a `?` at the end). Note that the indication only considers
remotes where the branch currently exists, so there won't be an
indication that the branch has not been pushed to a remote.
Closes#254
The `testutils` module should ideally not be part of the library
dependencies. Since they're used by the integration tests (and the CLI
tests), we need to move them to a separate crate to achieve that.
Unfortunately, TOML requires quotes around the argument. So, the
usage is `jj --config-toml ui.color=\"always\"` in bash. The plan is
to eventually have a `--config` option with simpler syntax for
simple cases.
As discussed in https://github.com/martinvonz/jj/discussions/688.
It seems very likely that we're going to remove support for open
commits, but it's still useful to have a `commit` command that lets
the user enter a description and starts a new change. Calling it
`commit` seems good to make the transition from other VCSs simpler.
The whole file is about the colocated case, where we automatically
import and export on every command, so there should be no reason to
call `git import` here.
The smoke test was useful a year ago, when our CLI test environment
was still annoying enough to use that there were very few tests. We
now have enough tests that the smoke test is not needed.
Mercurial's test runner does something like this.
I considered replacing `\` by `/` everywhere, but we use `\` in
graph-log output quite frequently, so it doesn't seem worth it.
I was trying to create a reproduction script for #412, but the script
ran into another bug first. The script removed all the local and
remote branches from the backing Git repo. I noticed that we would
then try to abandon all commits. We should still count Git HEAD's
target as visible and not try to abandon it. This patch fixes that.
It seems simpler to do the snapshotting after merging any concurrent
operations instead of snapshotting on top of one of the operations,
especially since the attempt to snapshot may end up noticing that the
working copy is stale.
More importantly, snapshotting before resolving operations resulted in
a crash if the working copy was modified. That happened because we
held a lock on the operation heads (`locked_op_heads`) while we tried
to record the operation committing the working copy. I noticed this
only after adding the test.
This commit adds a reminder in `finish_transaction()` if the user
hasn't configured their name and email. That means they'll get a
reminder after most mutating commits, except for commands that only
snapshot the working copy, and a few more cases.
Closes#530.
The native backend is just a proof of concept and there's no real
reason to use it other than for testing, so let's reduce the risk of
accidentally creating repos using it.
I changed the "GLOGAL OPTIONS" help heading to use title case, to
match clap's new help style.
I also removed our override of the help text for `-h, --help` because
the default text now includes "(use `-h` for a summary)" (and it's
harder override now).
Perhaps the most obvious difference to users will be the changed help
output
(https://epage.github.io/blog/2022/09/clap4/#polishing-help-output). It
no longer has color, and long lines are not wrapped. I suppose we
should wrap the text ourselves instead..
I feel the original -------/+++++++ pair is slightly confusing because
each half can be a separator by itself. I don't know what character other
than '-'/'+' is preferred, but let's pick '%' (for "mod") per @martinvonz
suggestion.
`wc_commit` seems clearer than `checkout` and not too much longer. I
considered `working_copy` but it was less clear (could be the path to
the working copy, or an instance of `WorkingCopy`). I also considered
`working_copy_commit`, but that seems a bit too long.
In the current implementation, tree is diffed twice if both PATH and -p
are specified. If this adds significant cost, we'll need to reimplement
it without using a revset abstraction (or maybe adjust revset/graph API.)
Previously, using `rebase -r` on the parent of a merge commit
turned it into a non-merge commit. In other words, starting
with
```
o d
|\
o | c
o | b
| o a
|/
o
```
and doing `rebase -r c -d a` resulted in
```
o d
o b
| o c
| o a
|/
o
```
where `d` is no longer a merge commit.
For reference, here's a complete test that passed before this commit (but should NOT pass; see the diff for a test that should pass):
```
#[test]
fn test_rebase_single_revision_merge_parent() {
let test_env = TestEnvironment::default();
test_env.jj_cmd_success(test_env.env_root(), &["init", "repo", "--git"]);
let repo_path = test_env.env_root().join("repo");
create_commit(&test_env, &repo_path, "a", &[]);
create_commit(&test_env, &repo_path, "b", &[]);
create_commit(&test_env, &repo_path, "c", &["b"]);
create_commit(&test_env, &repo_path, "d", &["a", "c"]);
// Test the setup
insta::assert_snapshot!(get_log_output(&test_env, &repo_path), @r###"
@
o d
|\
o | c
o | b
| o a
|/
o
"###);
let stdout = test_env.jj_cmd_success(&repo_path, &["rebase", "-r", "c", "-d", "a"]);
insta::assert_snapshot!(stdout, @r###"
Also rebased 2 descendant commits onto parent of rebased commit
Working copy now at: 3e176b54d680 (no description set)
Added 0 files, modified 0 files, removed 2 files
"###);
insta::assert_snapshot!(get_log_output(&test_env, &repo_path), @r###"
@
o d
| o c
o | b
| o a
|/
o
"###);
}
```
Add the `jj interdiff` command for comparing only the diffs of commits.
Its args are identical to that of `jj diff`, minus `--revision` (because
interdiff always requires two commits).
Like `jj obslog -p`, Changes introduced by intervening commits are
ignored by rebasing `--from` onto `--to` 's parents.
`jj merge` just creates an empty change, which is practically the same
as `jj new`. The main difference is that the former requires more than
one argument and the latter requires at most one argument. It seems
cleaner to generalize them and make them aliases. This patch starts
doing that by making `jj new` accept more than one argument.
Instead of having `jj merge` be exactly an alias for `jj new`, we may
want to make it a thin wrapper that just checks that more than one
argument was given. That would probably be less confusing to users who
run `jj merge` without arguments to see what it does.
We should probably make `jj checkout` also be an alias for `jj new`,
but that will have to wait until we have removed support for open
commits (since `jj checkout` still has logic for dealing with open
commits).
In 8ae9540f2c, I made `jj move/squash/unsquash` not abandon the
working copy if it became empty because that would lose any
description associated with it. It turned out that the new behavior
was also confusing because it made it unclear if the working-copy
commit was actually abandoned. Let's roll back that change and instead
ask the user for a combined description when both the source and
destination commits have non-empty descriptions. Not discarding a
non-empty description seems like a good improvement regardless of the
behavior related to working-copy commits. It's also how `hg fold`
behaves (though hg doesn't allow the description to be empty).
libgit2 by default will respect config files present on a user's
machine---in particular, when creating a new repo, it will read
`init.defaultBranch` to determine what the name of the default branch
should be. This makes the tests non-hermetic, so disable that feature.
On my machine, `init.defaultBranch` is set in system config. Without
this patch, `test_git_colocated` and
`test_git_colocated_rebase_on_import` fail, but with this patch, they
pass.
The two commands are very similar and we should probably make one an
alias of the other (or just delete one), but for now let's at least
make them more similar by supporting `-m` for both.
I currently think `jj new` is more natural when starting a new change
on top of the current one and `jj checkout` is more natural when
starting a new change on top of another one, as well as when you just
want to look around or run tests. `jj checkout` doesn't currently
default to the working copy like `jj new` does. Perhaps we should make
it do that. Will people eventually feel that it's natural to run `jj
checkout` to create a new change on top of the working copy, or will
they feel that it's natural to run `jj new` on an unrelated commit
even to just look around, or will we want them as synonyms forever?
I was initially worried about the cost of always snapshotting the
working copy, so that's why e.g. `jj diff -r <some hash>` doesn't do
it. However, there's been a few caused by missing snapshotting, and
there are still a few (I just noticed it in `jj undo` while writing
this patch). Let's always do the snapshotting and if the user really
doesn't want it, they can pass `--no-commit-working-copy` (which we
should probably rename to `--no-snapshot-working-copy` or maybe just
`--no-snapshot`). That should reduce bugs and make the CLI more
predictable.
Two test cases were affected becasue `jj merge` also didn't snapshot
the working copy.
Before this patch, e.g. `jj co --no-commit-working-copy` would error
out, but now it will succeed (without touching the working copy,
leaving the working copy stale). That may be confusing, but it should
be easy to recover from (e.g. by `jj undo`). We can consider adding a
check for it later if it seems too confusing (it's probably rarely
something the user wanted).
Since we now allow pushing open commits, we can implement support for
pushing the "current" branch by defining a "current" branch as any
branch pointing to `@`. That definition of a current/active seems to
have been the consensus in discussion #411.
Closes#246.
Since whitespace change is barely visible in color-words diff, I think it
would be too verbose to add "\ No newline at end of file" marker. Let's just
append missing newline to make the command output readable.
It's convenient to push all changed branches every time with `jj git
push`, but sometimes I want to know which branches were actually
pushed. This make the command print what it's going to do.
I'll add a `--dry-run` mode and tests next.
I think I had not added tests for successful push before because I
thought there was some issue with testing it with libgit2. There *is*
an issue, which is that libgit2 requires the remote to be bare when
it's on local disk, but we can very easily make the git repo bare in
this test.
I also updated the error handling in the `git` module to not let
follow-on errors hide the real error and to not fail if two branches
moved to the same commit.
We used to check only if the destination already had a `.jj/`
directory. This patch changes that to check that the destination is an
empty directory.
Closes#399.
We didn't seem to have any. I included a test for #399.
The tests also showed how the debug formatting (`{:?}`) results in
escaped (e.g.) backslashes on Windows, which is not what we want, so I
also fixed that.
By adding `ui.open-commits=false` in your config, you can now make `jj
checkout` always create a new working-copy commit on top of the
specified commit. If the config is set, open commits will also appear
in the same color as closed commits in `jj log` etc. This will let
some of us experiment with the new UX before we decide if it's a good
idea or not. I left `jj close` in place because it's useful for
setting a description and creating a new commit in one step.
I didn't mention the new config in the release notes because I hope we
can reach a decision and remove the config before the next release.
I'm about to change how `jj checkout` works w.r.t. open/closed commits
(and in particular by moving some logic from the library crate to the
CLI), so let's make sure we have some test coverage.
This patch adds `jj obslog -p` for including the diff compared to the
predecessor (the first predecessor if there are several). If the
predecessor's parents are different, then we create a temporary tree
by rebasing the predecessor to have the same parents and we use the
result as base for the diff. That way, we avoid polluting the diff
with the changes caused by the rebase. (I don't think we currently
have any commands that can change both parents and content, so the
diff should always be empty for rewrites caused by a rebase.)
Working on this also reminded me that it'll be really nice when we
replace `jj obslog` by something based on the operation log - I really
miss seeing information about the operation in the output (like `hg
obslog` gets from its obsmarkers).
I was a bit surprised to see the message when I used `jj git push
--change @-` on a commit that already had a branch because I had
pushed it earlier.
The fix means that we instead print the message even if we later
abandon the transaction (so the branch-creation is not persisted)
because the commit is open, for example. That's already what happens
if the commit is missing a description, and since we're planning to
remove the open/closed concept, I don't think this patch makes it much
worse. We probably should improve it later by printing the message
only once the push has succeeded.
I often redirect the jj output to pager, so I set ui.color = "always" in
config file. This patch allows me to remove such config, and instead specify
--color=always only when needed.
According to the NO_COLOR FAQ, "user-level configuration files [...] should
override $NO_COLOR." https://no-color.org/
Unfortunately this makes it harder to test the $NO_COLOR behavior since the
test environment isn't attached to a tty. We could allocate a pty or
LD_PRELOAD shim to intercept isatty(), but I feel it would be too much to do.
https://github.com/assert-rs/assert_cmd/issues/138
This patch prevents perhaps pushing commits with an empty description
or the placeholder "(no user/email configured)" values for
author/committer.
Closes#322.
If the source commit becomes empty as a result of
`move/squash/unsquash`, we abandon it. However, perhaps we shouldn't
do that if the source commit is a working-copy commit because
working-copy commits are often work-in-progress commits.
The background for this change is that @arxanas had just started a new
change and had set a description on it, and then decided to make some
changes in the working copy that should be in the parent
commit. Running `jj squash` then abandoned the working-copy commit,
resuling in the description getting lost.
We had tests for `jj move` and `jj squash`, but not for `jj
unsquash`. I'm about to add a `--keep` option, so let's add tests for
the current behavior first.
Before this change, `jj new` would check out the new commit only if it
was created on top of the current commit. I never liked that
special-casing, and after thinking more about how the open/closed
should work (see discussion #321), I think we want `jj new` to behave
similar to how `git/hg checkout` works, so it can effectively replace
the current `jj checkout` command for the use case of starting new
work on top of an existing commit.
It can be confusing that some commits (typically the working copy)
don't have a description. Let's show a placeholder text in such cases.
I chose the format to match the "(no email configured)" message we
already have.
This should help make e.g. `squash` discoverable for users who search
the help output for "amend". It should also help users discover the
builtin abbreviations like `st` (for `status`).
This adds a `--reversed` flag to `jj log` to show commits with later
commits further down. It works both with and without the graph.
Since the graph-drawing code is already independent of the
relationship between commits, it doesn't need any updating.
`log -s/--summary` and `log --git` without `-p` don't do anything. I
also don't think it's very useful to pass these flags in an alias,
where you would then sometimes also pass `-p` to see the diff summary
in the output. We already have the `diff.format` config for that use
case. So let's make both of these flags imply `-p`.
I implemented it by making the `diff_format` variable an
`Option<DiffFormat>`, which is set iff we should show a patch. That
way we have the condition in one place, and the places we use it
cannot forget to check it.
Our support for aliases is very naively implemented; it assumes the
alias is the first argument in argv. It therefore fails to resolve
aliases after global arguments such as `--at-op`.
This patch fixes that by modifying the command defintion to have an
"external subcommand" in the list of available commands. That makes
`clap` give us the remainder of the arguments when it runs into an
unknown command. The first in the list will then be an alias or simply
an unknown command. Thanks to @epage for the suggestion on in
clap-rs/clap#3672.
With the new structure, it was easy to handle recursive alias
definitions, so I added support for that too.
Closes#292.
With this patch, the order is this:
`$JJ_EDITOR` environement variable
`ui.editor` config
`$VISUAL` environement variable
`$EDITOR` environement variable
`pico`
That matches git, except that git falls back to an editor determined
at compile time (usually `vi`) instead of using `pico`.
As I said in 095fb9fef4, removing support for `~/.jjconfig` was an
experiment. I've heard from a few people (including in #233) that they
would prefer to have configs in the home directory. This patch
therefore restores that functionality, except I added a `.toml`
extension to the file to clarify the expected format to users and
editors.
After this patch, we still allow configs in `$XDG_CONFIG_HOME` (and
the other paths used by `dirs::config_dir()`), but we error out there
are config files in both that location and `~/.jjconfig.toml`.
We didn't have any testing of exit codes on failure, other than
checking that they were not 0. This patch changes that so we always
check. Since we have the special exit code 2 (set by `clap`) for
incorrect command line, I've replaced some testing of error messages
by testing of just the exit code.
As part of this, I also fixed `jj branch --allow-backwards` to
actually require `-r` (it didn't before because having a default value
means the argument is considered always provided).
Since 57ba9a9409, if the automatic import from git results in some
abandoned commit, that information gets recorded in the `MutableRepo`,
but I forgot to add a call to rebase the descendants. That causes a
failed assertion at
81a8cfefcb/lib/src/transaction.rs (L86). This
patch add a test showing that failure.
This adds `jj git push --change <revision>` which creates a branch
with a name based on the revision's change ID, and then pushes that
like with `--branch`. That can be useful so you don't have to manually
add the branch (and come up with a name for it). The created branch
behaves like any other branch, so it's possible to make it point to a
commit with a different change ID.
As requested by @talpr. I added this is a separate new command `jj git
remote list`. One could also imagine showing the listing when there is
no sub-command specified to `jj git remote`, but we don't have other
commands that behave that way yet.
Closes#243
This adds a `jj sparse` command with options to list and manage the
set of paths to include in the working copy. It only supports includes
(postive matches) for now.
I'm not sure "sparse" is the best name for the feature. Perhaps it
would make sense as a subcommand under `jj workspace` - maybe `jj
workspace track`? However, there's also `jj untrack` for removing a
file from the working copy and leaving it in the working copy. I'm
happy to hear suggestions, or we can get back to the naming later.
It's useful for testing to be able to specify some operation that's
not the latest one.
I didn't update the changelog because this feature is mostly for
testing.
I originally made the operation argument a named argument
(`--operation`) to allow for a change ID to be passed as a positional
argument, matching e.g. `hg revert -r <rev> <path>`. However, even if
we add support for undoing changes only to certain change IDs, it's
going to be done much less frequently than full undo/restore. We can
therefore make that a named argument if we ever add it.
The `DescendantRebaser` keeps a map of branches from the source
commit, so it gets efficient lookup of branches to update when a
commit has been rebased. This map was not kept up to date as we
rebased. That could lead to branches getting left on hidden
intermediate commits. Specifically, if a commit with a branch was
rewritten by some command, and an ancestor of it was also rewritten,
then we'd only update the branch only the first step and not update it
again when rebasing onto the rewritten ancestor.
I noticed earlier today that branches get lost (stuck on a hidden
commit) when you move part of a change to an ancestor. This patch adds
tests for both of those cases, showing the bug. There's no special
logic for this case in the CLI crate, so we should be able to test it
in the library crate instead, but since I have already written the
tests, maybe we can keep them.
It's annoying especially for tests to not be able to append to a
config file without knowing the contents (as you have to do with
TOML). Let's read all files in a directory if `$JJ_CONFIG` points to a
directory. Mercurial does that for its `$HGRCPATH` variable.
I quite often want to move the changes to a particular file from one
commit to another. We already support that using `jj move -i`, but
that can be annoying to run because we don't have a TUI for it
(#48). Let's make it possible to do `jj move --from X --to Y <path>`.
It seems very unlikely that the user would want to untrack all paths
(that's still possible with `jj untrack .`, if they really want to,
and have added all their current paths to the `.gitignore`).
These tests are very similar to the `jj restore -i` tests because `jj
edit -r $REV` is a specialized version of `jj restore -i --from $REV-
--to $REV` on non-merge commits.
I'm adding this mostly because it's useful for testing. That's also
the reason it supports displaying conflicts. I didn't call it `cat`
like `hg cat` because I haven't found `hg cat` on multiple files
useful.
I've found it hard to read the `jj help` output because command
options are mixed with global options. This patch fixes that by
putting global options under a separate heading.
Sometimes it's useful to have an environment variable set for all
commands in a test. This patch lets you do that by adding environment
variables to the `TestEnvironment` itself. These will then be set on
all subsequent commands.
When initializing a workspace that shares its working copy with a Git
repo (i.e. `jj init --git-repo=.`), we import refs and HEAD when
creating the `WorkspaceCommandHelper` (as we do for all commands when
the working copy is shared). That makes the explicit import we do in
`cmd_init()` unnecessary. It also makes the checkout of HEAD I added
for the fix of #102 unnecessary. More importantly, as @yuja reported
in #177, it makes the command crash (at least if the repo is small
enough that the two checkouts happen within a second). I think the
problem is that the second checkout tries to create the same commit
except that the Change ID is different (the problem is not the
predecessors as I speculated in the issue tracker). The fix is to
simply avoid doing the redundant work. We still need a proper fix for
#27 eventually.
Closes#177.
This patch adds a very simple e2e test of having a working copy shared
with Git. The test initially failed on Windows. The symptom was that
the "master" branch did not get updated when we create a commit using
`jj`. That suggested that we didn't correctly detect that the working
copy was shared. After a lot of troubleshooting, I think I mostly
understand what we going on here (thanks to @arxanas for suggesting
https://github.com/mxschmitt/action-tmate). The path we get from
`git2::Repository::workdir()` seems to not be canonicalized in the
same way as `std::fs::canonicalize()` canonicalizes. Specifically, it
does not have the "\\?\" prefix we get from that function. I suppose
that's because libgit2 is a C library and canonicalizes the path using
some other system call.
"log -p | less" is the option I often use with hg/git to find interesting
bits from the changelog, and I think it's also valid with jj. Unlike
"hg log -p --stat", "jj log -p --summary" does not show both diff summary
and patch to reflect the internal structure. This behavoir is arguable and
may be changed later.
The logic of show_patch() is extracted from cmd_show().
This involved copying `UnresolvedHeadRepo::resolve()` into the CLI
crate (and modifying it a bit to print number of rebased commit),
which is unfortunate.
It's unusual for the current commit to have descendants, but it can
happen. In particular, it can easily happen when you run `jj new`. You
probably don't want to abandon it in those cases.
We very often expect success, and we sometimes want to get the stdout,
too. Let's add a convenience function for that. It saves a lot of
lines of code.
It's useful for tests, scripts, and debugging to be able to use
specific config instead of the user's config. That's especially true
for our automated tests because they didn't have a place to read
config from on Windows before this patch (they read their config from
`{FOLDERID_RoamingAppData}`, which I don't think we can override in
tests).
I thought that `std::fs::canonicalize()` expanded "~", but it doesn't
seem to do that, which caused #131. Git seems to do the expansion
itself, so we probably also should. More importantly
`std::fs::canonicalize()` crashes when the file doesn't exist. The
manual expansion we do now does not.
Closes#131.
It probably doesn't make sense to respect Git's `core.excludesFile`
config when not running in a Git-backed repo, but we also already
respect `.gitignore` files in the working copy regardless of backend,
so at least it's consistent with that. We can revisit it when the
native backend becomes a reasonable choice.
Closes#87.
Open commits are work-in-progress and `jj git push --branch <name>`
therefore errors out if the branch points to an open commit. However,
we don't do the same check if you run `jj git push` to push all
branches. This patch introduces such a check. Rather than error out,
we skip such branches instead.
I didn't make it check for open commits in ancestors. It's quite
unusual (at least in my workflow) to have a closed commit on top of an
open one. We can revisit if users get surprised by it.
It rarely makes sense to push commits with conflicts to a remote Git
repo (which is the only kind of remote we support so far), so let's
just error out instead of pushing a commit that others pulling from
the remote probably can't make sense of.
I've only added a simple test for the error case for now. `libgit2`
doesn't support pushing to a local repo, so it's harder to test the
success case. I suppose we'll have to have the regular `git` binary
running local servers in test eventually.
Closes#60.
The `trim_trailing_whitespace` config is not working well with
multi-line string literals. I've tried to work around
intellij-rust/intellij-rust#5368 twice and now I want to use the
`insta` crate so I'd need to find another workaround. Let's just
disable the config instead. I wouldn't be surprised if other editors
have similar bugs as IntelliJ.
When the backing Git repo is inside the workspace (typically directly
in `.git/`), let's point to it by a relative path so the whole
workspace can be moved without breaking the link.
Closes#72.
When using an internal Git repo (`jj init --git`), we make
`.jj/repo/store/git_target` point directly to the repo (which is bare
in that case). It makes sense to do the same when using an external
Git repo (`jj init --git-repo`), so the contents of
`.jj/repo/store/git_target` doesn't depend on whether the user
included the `.git/` on the CLI.
This patch introduces a `JJ_TIMESTAMP` environment variable that lets
us specify the timestamp to use in tests. It also updates the tests to
use it, which means we get to simplify the tests a lot now that that
the hashes are predictable.
As pointed out by @arxanas in #88, the message saying something like
"At least 'bin/.DS_Store' was added back ..." is confusing especially
when the command you ran was just `jj untrack bin/.DS_Store`. Let's
clarify the message by saying exactly how many more files there are,
and specialize the message for when there is only one file. Also
update the message to say "would be added back" instead of "was added
back" since we don't actually change anything if some files would be
added back (since 4b91ad408c).
Should we even list all the files? I'm concerned that such a list
could be very long. On the other hand, it can also be annoying to have
to run `jj untrack some/dir/` and only be told about single file to
add to the ignore patterns every time.
The new `.editorconfig` tells editors to strip trailing whitespace,
but IntelliJ has a bug where it strips trailing whitespace even inside
multi-line strings. We can work around it in the cases we have because
they're regexes, so `[ ]` works as a space.
The `.jj/` directory contains information about two distinct parts:
the repo and the working copy. Most subdirectories are related to the
repo; only `.jj/working_copy/` is about the working copy. Let's move
the repo-related bits into a new `.jj/repo/` subdirectory. That makes
it clearer that they're related to the repo. It will probably also be
easier to manage when we have support for multiple workspaces backed
by a single repo.
I think this is just cleaner, and it gives us room to put other
store-related data in the `.jj/store/` directory. I may want to use
that place for writing the metadata we currently write in Git notes
(#7).
I considered even changing the message to "Checking out: <commit>" as
that's technically more correct (the message is printed when the
view's checkout is updated, i.e. before the working copy is
updated). However, I worried that users would find it confusing that
e.g. `jj close` would result in a "Checking out: " message, even
though that's what actually happens.
I remember adding that message a long time ago so the user has a trace
of working copy commit ids in the terminal output. They should be able
to get the same information from the operation log combined with
e.g. `jj st --at-op`.
Perhaps it makes more sense to display the working copy commit just
above the changes in the working copy commit, even though that means
that the order between the working copy commit and the parent becomes
the opposite of the order in `jj log`.
"{:?}" escapes `\` to `\\` for Windows paths. That breaks tests checking
paths without using "{:?}". Use PathBuf::display() in both commands and
tests to get consistent output.
This fixes test_init_local, test_init_git_internal, and
test_init_git_external on Windows.
I'm preparing to publish an early version before someone takes the
name(s) on crates.io. "jj" has been taken by a seemingly useless
project, but "jujube" and "jujube-lib" are still available, so let's
use those.
It's annoying to have to have the Git repo and Jujube repo in separate
directories. This commit adds `jj init --git`, which creates a new
Jujube repo with an empty, bare git repo in `.jj/git/`. Hopefully the
`jj git` subcommands will eventually provide enough functionality for
working with the Git repo that the user won't have to use Git commands
directly. If they still do, they can run them from inside `.jj/git/`,
or create a new worktree based on that bare repo.
The implementation is quite straight-forward. One thing to note is
that I made `.jj/store` support relative paths to the Git repo. That's
mostly so the Jujube repo can be moved around freely.
