I was initially worried about the cost of always snapshotting the
working copy, so that's why e.g. `jj diff -r <some hash>` doesn't do
it. However, there's been a few caused by missing snapshotting, and
there are still a few (I just noticed it in `jj undo` while writing
this patch). Let's always do the snapshotting and if the user really
doesn't want it, they can pass `--no-commit-working-copy` (which we
should probably rename to `--no-snapshot-working-copy` or maybe just
`--no-snapshot`). That should reduce bugs and make the CLI more
predictable.
Two test cases were affected becasue `jj merge` also didn't snapshot
the working copy.
Before this patch, e.g. `jj co --no-commit-working-copy` would error
out, but now it will succeed (without touching the working copy,
leaving the working copy stale). That may be confusing, but it should
be easy to recover from (e.g. by `jj undo`). We can consider adding a
check for it later if it seems too confusing (it's probably rarely
something the user wanted).
Since we now allow pushing open commits, we can implement support for
pushing the "current" branch by defining a "current" branch as any
branch pointing to `@`. That definition of a current/active seems to
have been the consensus in discussion #411.
Closes#246.
Since whitespace change is barely visible in color-words diff, I think it
would be too verbose to add "\ No newline at end of file" marker. Let's just
append missing newline to make the command output readable.
It's convenient to push all changed branches every time with `jj git
push`, but sometimes I want to know which branches were actually
pushed. This make the command print what it's going to do.
I'll add a `--dry-run` mode and tests next.
I think I had not added tests for successful push before because I
thought there was some issue with testing it with libgit2. There *is*
an issue, which is that libgit2 requires the remote to be bare when
it's on local disk, but we can very easily make the git repo bare in
this test.
I also updated the error handling in the `git` module to not let
follow-on errors hide the real error and to not fail if two branches
moved to the same commit.
We used to check only if the destination already had a `.jj/`
directory. This patch changes that to check that the destination is an
empty directory.
Closes#399.
We didn't seem to have any. I included a test for #399.
The tests also showed how the debug formatting (`{:?}`) results in
escaped (e.g.) backslashes on Windows, which is not what we want, so I
also fixed that.
By adding `ui.open-commits=false` in your config, you can now make `jj
checkout` always create a new working-copy commit on top of the
specified commit. If the config is set, open commits will also appear
in the same color as closed commits in `jj log` etc. This will let
some of us experiment with the new UX before we decide if it's a good
idea or not. I left `jj close` in place because it's useful for
setting a description and creating a new commit in one step.
I didn't mention the new config in the release notes because I hope we
can reach a decision and remove the config before the next release.
I'm about to change how `jj checkout` works w.r.t. open/closed commits
(and in particular by moving some logic from the library crate to the
CLI), so let's make sure we have some test coverage.
This patch adds `jj obslog -p` for including the diff compared to the
predecessor (the first predecessor if there are several). If the
predecessor's parents are different, then we create a temporary tree
by rebasing the predecessor to have the same parents and we use the
result as base for the diff. That way, we avoid polluting the diff
with the changes caused by the rebase. (I don't think we currently
have any commands that can change both parents and content, so the
diff should always be empty for rewrites caused by a rebase.)
Working on this also reminded me that it'll be really nice when we
replace `jj obslog` by something based on the operation log - I really
miss seeing information about the operation in the output (like `hg
obslog` gets from its obsmarkers).
I was a bit surprised to see the message when I used `jj git push
--change @-` on a commit that already had a branch because I had
pushed it earlier.
The fix means that we instead print the message even if we later
abandon the transaction (so the branch-creation is not persisted)
because the commit is open, for example. That's already what happens
if the commit is missing a description, and since we're planning to
remove the open/closed concept, I don't think this patch makes it much
worse. We probably should improve it later by printing the message
only once the push has succeeded.
I often redirect the jj output to pager, so I set ui.color = "always" in
config file. This patch allows me to remove such config, and instead specify
--color=always only when needed.
According to the NO_COLOR FAQ, "user-level configuration files [...] should
override $NO_COLOR." https://no-color.org/
Unfortunately this makes it harder to test the $NO_COLOR behavior since the
test environment isn't attached to a tty. We could allocate a pty or
LD_PRELOAD shim to intercept isatty(), but I feel it would be too much to do.
https://github.com/assert-rs/assert_cmd/issues/138
This patch prevents perhaps pushing commits with an empty description
or the placeholder "(no user/email configured)" values for
author/committer.
Closes#322.
If the source commit becomes empty as a result of
`move/squash/unsquash`, we abandon it. However, perhaps we shouldn't
do that if the source commit is a working-copy commit because
working-copy commits are often work-in-progress commits.
The background for this change is that @arxanas had just started a new
change and had set a description on it, and then decided to make some
changes in the working copy that should be in the parent
commit. Running `jj squash` then abandoned the working-copy commit,
resuling in the description getting lost.
We had tests for `jj move` and `jj squash`, but not for `jj
unsquash`. I'm about to add a `--keep` option, so let's add tests for
the current behavior first.
Before this change, `jj new` would check out the new commit only if it
was created on top of the current commit. I never liked that
special-casing, and after thinking more about how the open/closed
should work (see discussion #321), I think we want `jj new` to behave
similar to how `git/hg checkout` works, so it can effectively replace
the current `jj checkout` command for the use case of starting new
work on top of an existing commit.
It can be confusing that some commits (typically the working copy)
don't have a description. Let's show a placeholder text in such cases.
I chose the format to match the "(no email configured)" message we
already have.
This should help make e.g. `squash` discoverable for users who search
the help output for "amend". It should also help users discover the
builtin abbreviations like `st` (for `status`).
This adds a `--reversed` flag to `jj log` to show commits with later
commits further down. It works both with and without the graph.
Since the graph-drawing code is already independent of the
relationship between commits, it doesn't need any updating.
`log -s/--summary` and `log --git` without `-p` don't do anything. I
also don't think it's very useful to pass these flags in an alias,
where you would then sometimes also pass `-p` to see the diff summary
in the output. We already have the `diff.format` config for that use
case. So let's make both of these flags imply `-p`.
I implemented it by making the `diff_format` variable an
`Option<DiffFormat>`, which is set iff we should show a patch. That
way we have the condition in one place, and the places we use it
cannot forget to check it.
Our support for aliases is very naively implemented; it assumes the
alias is the first argument in argv. It therefore fails to resolve
aliases after global arguments such as `--at-op`.
This patch fixes that by modifying the command defintion to have an
"external subcommand" in the list of available commands. That makes
`clap` give us the remainder of the arguments when it runs into an
unknown command. The first in the list will then be an alias or simply
an unknown command. Thanks to @epage for the suggestion on in
clap-rs/clap#3672.
With the new structure, it was easy to handle recursive alias
definitions, so I added support for that too.
Closes#292.
With this patch, the order is this:
`$JJ_EDITOR` environement variable
`ui.editor` config
`$VISUAL` environement variable
`$EDITOR` environement variable
`pico`
That matches git, except that git falls back to an editor determined
at compile time (usually `vi`) instead of using `pico`.
As I said in 095fb9fef4, removing support for `~/.jjconfig` was an
experiment. I've heard from a few people (including in #233) that they
would prefer to have configs in the home directory. This patch
therefore restores that functionality, except I added a `.toml`
extension to the file to clarify the expected format to users and
editors.
After this patch, we still allow configs in `$XDG_CONFIG_HOME` (and
the other paths used by `dirs::config_dir()`), but we error out there
are config files in both that location and `~/.jjconfig.toml`.
We didn't have any testing of exit codes on failure, other than
checking that they were not 0. This patch changes that so we always
check. Since we have the special exit code 2 (set by `clap`) for
incorrect command line, I've replaced some testing of error messages
by testing of just the exit code.
As part of this, I also fixed `jj branch --allow-backwards` to
actually require `-r` (it didn't before because having a default value
means the argument is considered always provided).
Since 57ba9a9409, if the automatic import from git results in some
abandoned commit, that information gets recorded in the `MutableRepo`,
but I forgot to add a call to rebase the descendants. That causes a
failed assertion at
81a8cfefcb/lib/src/transaction.rs (L86). This
patch add a test showing that failure.
This adds `jj git push --change <revision>` which creates a branch
with a name based on the revision's change ID, and then pushes that
like with `--branch`. That can be useful so you don't have to manually
add the branch (and come up with a name for it). The created branch
behaves like any other branch, so it's possible to make it point to a
commit with a different change ID.
As requested by @talpr. I added this is a separate new command `jj git
remote list`. One could also imagine showing the listing when there is
no sub-command specified to `jj git remote`, but we don't have other
commands that behave that way yet.
Closes#243
This adds a `jj sparse` command with options to list and manage the
set of paths to include in the working copy. It only supports includes
(postive matches) for now.
I'm not sure "sparse" is the best name for the feature. Perhaps it
would make sense as a subcommand under `jj workspace` - maybe `jj
workspace track`? However, there's also `jj untrack` for removing a
file from the working copy and leaving it in the working copy. I'm
happy to hear suggestions, or we can get back to the naming later.
It's useful for testing to be able to specify some operation that's
not the latest one.
I didn't update the changelog because this feature is mostly for
testing.
I originally made the operation argument a named argument
(`--operation`) to allow for a change ID to be passed as a positional
argument, matching e.g. `hg revert -r <rev> <path>`. However, even if
we add support for undoing changes only to certain change IDs, it's
going to be done much less frequently than full undo/restore. We can
therefore make that a named argument if we ever add it.
The `DescendantRebaser` keeps a map of branches from the source
commit, so it gets efficient lookup of branches to update when a
commit has been rebased. This map was not kept up to date as we
rebased. That could lead to branches getting left on hidden
intermediate commits. Specifically, if a commit with a branch was
rewritten by some command, and an ancestor of it was also rewritten,
then we'd only update the branch only the first step and not update it
again when rebasing onto the rewritten ancestor.
I noticed earlier today that branches get lost (stuck on a hidden
commit) when you move part of a change to an ancestor. This patch adds
tests for both of those cases, showing the bug. There's no special
logic for this case in the CLI crate, so we should be able to test it
in the library crate instead, but since I have already written the
tests, maybe we can keep them.
It's annoying especially for tests to not be able to append to a
config file without knowing the contents (as you have to do with
TOML). Let's read all files in a directory if `$JJ_CONFIG` points to a
directory. Mercurial does that for its `$HGRCPATH` variable.
I quite often want to move the changes to a particular file from one
commit to another. We already support that using `jj move -i`, but
that can be annoying to run because we don't have a TUI for it
(#48). Let's make it possible to do `jj move --from X --to Y <path>`.
It seems very unlikely that the user would want to untrack all paths
(that's still possible with `jj untrack .`, if they really want to,
and have added all their current paths to the `.gitignore`).
These tests are very similar to the `jj restore -i` tests because `jj
edit -r $REV` is a specialized version of `jj restore -i --from $REV-
--to $REV` on non-merge commits.
I'm adding this mostly because it's useful for testing. That's also
the reason it supports displaying conflicts. I didn't call it `cat`
like `hg cat` because I haven't found `hg cat` on multiple files
useful.
I've found it hard to read the `jj help` output because command
options are mixed with global options. This patch fixes that by
putting global options under a separate heading.
Sometimes it's useful to have an environment variable set for all
commands in a test. This patch lets you do that by adding environment
variables to the `TestEnvironment` itself. These will then be set on
all subsequent commands.
When initializing a workspace that shares its working copy with a Git
repo (i.e. `jj init --git-repo=.`), we import refs and HEAD when
creating the `WorkspaceCommandHelper` (as we do for all commands when
the working copy is shared). That makes the explicit import we do in
`cmd_init()` unnecessary. It also makes the checkout of HEAD I added
for the fix of #102 unnecessary. More importantly, as @yuja reported
in #177, it makes the command crash (at least if the repo is small
enough that the two checkouts happen within a second). I think the
problem is that the second checkout tries to create the same commit
except that the Change ID is different (the problem is not the
predecessors as I speculated in the issue tracker). The fix is to
simply avoid doing the redundant work. We still need a proper fix for
#27 eventually.
Closes#177.
This patch adds a very simple e2e test of having a working copy shared
with Git. The test initially failed on Windows. The symptom was that
the "master" branch did not get updated when we create a commit using
`jj`. That suggested that we didn't correctly detect that the working
copy was shared. After a lot of troubleshooting, I think I mostly
understand what we going on here (thanks to @arxanas for suggesting
https://github.com/mxschmitt/action-tmate). The path we get from
`git2::Repository::workdir()` seems to not be canonicalized in the
same way as `std::fs::canonicalize()` canonicalizes. Specifically, it
does not have the "\\?\" prefix we get from that function. I suppose
that's because libgit2 is a C library and canonicalizes the path using
some other system call.
"log -p | less" is the option I often use with hg/git to find interesting
bits from the changelog, and I think it's also valid with jj. Unlike
"hg log -p --stat", "jj log -p --summary" does not show both diff summary
and patch to reflect the internal structure. This behavoir is arguable and
may be changed later.
The logic of show_patch() is extracted from cmd_show().
This involved copying `UnresolvedHeadRepo::resolve()` into the CLI
crate (and modifying it a bit to print number of rebased commit),
which is unfortunate.
It's unusual for the current commit to have descendants, but it can
happen. In particular, it can easily happen when you run `jj new`. You
probably don't want to abandon it in those cases.
We very often expect success, and we sometimes want to get the stdout,
too. Let's add a convenience function for that. It saves a lot of
lines of code.
It's useful for tests, scripts, and debugging to be able to use
specific config instead of the user's config. That's especially true
for our automated tests because they didn't have a place to read
config from on Windows before this patch (they read their config from
`{FOLDERID_RoamingAppData}`, which I don't think we can override in
tests).
I thought that `std::fs::canonicalize()` expanded "~", but it doesn't
seem to do that, which caused #131. Git seems to do the expansion
itself, so we probably also should. More importantly
`std::fs::canonicalize()` crashes when the file doesn't exist. The
manual expansion we do now does not.
Closes#131.
It probably doesn't make sense to respect Git's `core.excludesFile`
config when not running in a Git-backed repo, but we also already
respect `.gitignore` files in the working copy regardless of backend,
so at least it's consistent with that. We can revisit it when the
native backend becomes a reasonable choice.
Closes#87.
Open commits are work-in-progress and `jj git push --branch <name>`
therefore errors out if the branch points to an open commit. However,
we don't do the same check if you run `jj git push` to push all
branches. This patch introduces such a check. Rather than error out,
we skip such branches instead.
I didn't make it check for open commits in ancestors. It's quite
unusual (at least in my workflow) to have a closed commit on top of an
open one. We can revisit if users get surprised by it.
It rarely makes sense to push commits with conflicts to a remote Git
repo (which is the only kind of remote we support so far), so let's
just error out instead of pushing a commit that others pulling from
the remote probably can't make sense of.
I've only added a simple test for the error case for now. `libgit2`
doesn't support pushing to a local repo, so it's harder to test the
success case. I suppose we'll have to have the regular `git` binary
running local servers in test eventually.
Closes#60.
The `trim_trailing_whitespace` config is not working well with
multi-line string literals. I've tried to work around
intellij-rust/intellij-rust#5368 twice and now I want to use the
`insta` crate so I'd need to find another workaround. Let's just
disable the config instead. I wouldn't be surprised if other editors
have similar bugs as IntelliJ.
When the backing Git repo is inside the workspace (typically directly
in `.git/`), let's point to it by a relative path so the whole
workspace can be moved without breaking the link.
Closes#72.
When using an internal Git repo (`jj init --git`), we make
`.jj/repo/store/git_target` point directly to the repo (which is bare
in that case). It makes sense to do the same when using an external
Git repo (`jj init --git-repo`), so the contents of
`.jj/repo/store/git_target` doesn't depend on whether the user
included the `.git/` on the CLI.
This patch introduces a `JJ_TIMESTAMP` environment variable that lets
us specify the timestamp to use in tests. It also updates the tests to
use it, which means we get to simplify the tests a lot now that that
the hashes are predictable.
As pointed out by @arxanas in #88, the message saying something like
"At least 'bin/.DS_Store' was added back ..." is confusing especially
when the command you ran was just `jj untrack bin/.DS_Store`. Let's
clarify the message by saying exactly how many more files there are,
and specialize the message for when there is only one file. Also
update the message to say "would be added back" instead of "was added
back" since we don't actually change anything if some files would be
added back (since 4b91ad408c).
Should we even list all the files? I'm concerned that such a list
could be very long. On the other hand, it can also be annoying to have
to run `jj untrack some/dir/` and only be told about single file to
add to the ignore patterns every time.
The new `.editorconfig` tells editors to strip trailing whitespace,
but IntelliJ has a bug where it strips trailing whitespace even inside
multi-line strings. We can work around it in the cases we have because
they're regexes, so `[ ]` works as a space.
The `.jj/` directory contains information about two distinct parts:
the repo and the working copy. Most subdirectories are related to the
repo; only `.jj/working_copy/` is about the working copy. Let's move
the repo-related bits into a new `.jj/repo/` subdirectory. That makes
it clearer that they're related to the repo. It will probably also be
easier to manage when we have support for multiple workspaces backed
by a single repo.
I think this is just cleaner, and it gives us room to put other
store-related data in the `.jj/store/` directory. I may want to use
that place for writing the metadata we currently write in Git notes
(#7).
I considered even changing the message to "Checking out: <commit>" as
that's technically more correct (the message is printed when the
view's checkout is updated, i.e. before the working copy is
updated). However, I worried that users would find it confusing that
e.g. `jj close` would result in a "Checking out: " message, even
though that's what actually happens.
I remember adding that message a long time ago so the user has a trace
of working copy commit ids in the terminal output. They should be able
to get the same information from the operation log combined with
e.g. `jj st --at-op`.
Perhaps it makes more sense to display the working copy commit just
above the changes in the working copy commit, even though that means
that the order between the working copy commit and the parent becomes
the opposite of the order in `jj log`.
"{:?}" escapes `\` to `\\` for Windows paths. That breaks tests checking
paths without using "{:?}". Use PathBuf::display() in both commands and
tests to get consistent output.
This fixes test_init_local, test_init_git_internal, and
test_init_git_external on Windows.
I'm preparing to publish an early version before someone takes the
name(s) on crates.io. "jj" has been taken by a seemingly useless
project, but "jujube" and "jujube-lib" are still available, so let's
use those.
It's annoying to have to have the Git repo and Jujube repo in separate
directories. This commit adds `jj init --git`, which creates a new
Jujube repo with an empty, bare git repo in `.jj/git/`. Hopefully the
`jj git` subcommands will eventually provide enough functionality for
working with the Git repo that the user won't have to use Git commands
directly. If they still do, they can run them from inside `.jj/git/`,
or create a new worktree based on that bare repo.
The implementation is quite straight-forward. One thing to note is
that I made `.jj/store` support relative paths to the Git repo. That's
mostly so the Jujube repo can be moved around freely.
