Move the source code (other than glob) into the "src" subdirectory.
Update all scripting and recommendations to support this change.
* *.c, *.h, w32/*: Move to src/
* configure.ac, Makefile.am, maintMakefile: Locate new source files.
* Basic.mk.template, mk/*: Update for new source file locations.
* NEWS, README.DOS.template: Update for new locations.
* build.template, build_w32.bat, builddos.bat: Ditto.
* po/POTFILES.in: Ditto
* tests/run_make_tests.pl, tests/scripts/features/load*: Ditto.
* make.1: Move to doc.
* mk/VMS.mk: Add support for building on VMS (hopefully).
* makefile.vms, prepare_w32.bat: Remove.
* SCOPTIONS: Update to define HAVE_CONFIG_H
Over time the non-standard build and install systems (nmake files,
smake files, Visual Studio project files, etc.) have atrophied and
maintaining them is not worth the effort, for such a simple utility
as make. Remove all the non-standard build tool support and unify
OS-specific build rules under a basic set of (GNU make) makefiles.
Preserve the existing bootstrapping scripts (for POSIX, Windows,
and MS-DOS). Also the existing VMS build scripts are left unchanged:
I don't have enough experience with VMS to venture into this area.
Perhaps one of the VMS maintainers might like to determine whether
conversion would be appropriate.
Rather than create libraries for w32 and glob (non-POSIX), simply
link the object files directly to remove the complexity.
* NEWS: Update with user-facing notes.
* Makefile.am: Clean up to use the latest automake best practices.
Build Windows code directly from the root makefile to avoid recursion.
* README.Amiga, README.DOS.template, README.W32.template: Updated.
* INSTALL: Point readers at the README.git file.
* maintMakefile: Remove obsolete files. Create Basic.mk file.
* Basic.mk.template, mk/*.mk: Create basic GNU make-based makefiles.
* build_w32.bat: Copy Basic.mk to Makefile
* configure.ac: We no longer need AM_PROG_AR.
* dosbuild.bat: Rename to builddos.bat. Incorporate configure.bat.
* Makefile.DOS.template: Remove.
* NMakefile.template, w32/subproc/NMakefile: Remove.
* SMakefile.template, glob/SMakefile, glob/SCOPTIONS, make.lnk: Remove.
* configure.bat, glob/configure.bat: Remove.
* w32/Makefile.am: Remove.
* make_msvc_net2003.sln, make_msvc_net2003.vcproj: Remove.
Compare against '$' directly rather than using MAP_VARIABLE.
This saves ~10% for find_map_function, which is the top hotspot in
QEMU's no-op build. The build is sped up overall by about 1.5%
more (from 11.1s to 10.95s).
* read.c (find_map_function): Do not compare against singleton sets.
Use the stopchar map to quickly jump over everything that is
not an open/close brace, an open/close parenthesis or a comma.
This saves 1% on QEMU's noop build (from 11.23s to 11.1s).
* function.c (find_next_argument, handle_function): Check
with STOP_SET before comparing against individual characters.
* main.c (initialize_stopchar_map): Initialize MAP_VARSEP
mappings in stopchar_map.
* makeint.h (MAP_VARSEP): New.
This is about twice as fast as the current hash, and removes the
need for double hashing (improving locality of reference). The
hash function is based on Bob Jenkins' design, slightly adapted
wherever Make needs to hash NUL-terminated strings. The old hash
function is kept for case-insensitive hashing.
This saves 8.5% on QEMU's no-op build (from 12.87s to 11.78s).
* configure.ac: Check endianness.
* hash.c (rol32, jhash_mix, jhash_final, JHASH_INITVAL,
sum_get_unaligned_32, jhash): New.
* hash.h (STRING_HASH_1, STRING_N_HASH_1): Use jhash.
(STRING_HASH_2, STRING_N_HASH_2): Return a dummy value.
(STRING_N_COMPARE, return_STRING_N_COMPARE): Prefer memcmp to strncmp.
In most cases, find_char_unquote has a single stopchar. In that
case we can look for it using strchr's optimized implementation.
This saves 3.5% on QEMU's noop build (from 11.78s to 11.37s).
* read.c (find_char_unquote): Rename to find_map_unquote. Replace
with an implementation optimized for the case where the stopchar
is a singleton. Adjust all callers.
collapse_continuations is already using strchr to speed up the
common case of no backslash-newline sequence, but on modern
processors it is faster to scan the string twice with
strchr+memmove (or strlen+memmove) than to move bytes manually.
Saves about 1.5% on QEMU's no-op build (from 11.37s to 11.23s).
* misc.c (collapse_continuations): Rewrite the scanning of LINE.
It has been proposed that glibc glob start using gl_lstat,
which the API allows it to do. GNU 'make' should not get in
the way of this. See:
https://sourceware.org/ml/libc-alpha/2017-09/msg00409.html
* dir.c (local_lstat): New function, like local_stat.
(dir_setup_glob): Use it to initialize gl_lstat too, as the API
requires.
* job.c (load_too_high): If /proc/loadavg is available, compare the
maximum load against the number of processes currently running. If
we can't parse /proc/loadavg, use the previous algorithm.
Concept and initial patch from Sven C. Dack <sven.c.dack@sky.com>
* job.c (unblock_sigs): Only unblock fatal signals not all signals.
(unblock_all_sigs): Unblock all signals not just fatal signals.
(child_execute_job): Call unblock_all_sigs() in child process.
* job.h: Remove unused function definitions.
* remote-cstms.c (start_remote_job): Call unblock_all_sigs() in
child process.
Reported by Koen Van Hoof <koen.van_hoof@nokia.com>
* variable.c (do_variable_definition): If $SHELL was not found,
process "SHELL=foo" as any other variable definition. This avoids
segfaults when SHELL=foo is specified on the Make command line.
Reported by Orgad Shaneh <orgads@gmail.com>.
* posixos.c (set_blocking): Set blocking on a file descriptor.
(jobserver_setup): Set non-blocking on the jobserver read side.
(jobserver_parse_auth): Ditto.
(jobserver_acquire_all): Set blocking to avoid a busy-wait loop.
(jobserver_acquire): If the non-blocking read() returns without
taking a token then try again.
* variable.h (enum variable_flavor: Add a new flavor for appended
values that shouldn't be expanded.
* variable.c (do_variable_definition): If given this new flavor,
do not expand the value before appending it.
* read.c (eval_makefile): Use this new flavor for MAKEFILE_LIST
* tests/scripts/variables/MFILE_LIST: Test filenames containing '$'.
* doc/make.texi (Appending): Document this behavior.
* variable.c (do_variable_definition): Only add a space if the variable
value is not empty.
* tests/scripts/variables/flavors: Test this behavior.
* makeint.h: Change OUT_OF_MEM() macro to out_of_memory() function.
* output.h, job.h: Move FD_* macros from job.h to output.h.
* output.c (output_write): Write a buffer to an FD directly.
(out_of_memory): Use output_write() to avoid allocating more
memory while writing the error, and call exit() instead of die().
This does mean we can't translate the error string, though.
* misc.c (xmalloc, xcalloc, xrealloc, xstrdup, xstrndup): Call new
out_of_memory() rather than OUT_OF_MEM().
* read.c (parse_file_seq): Ditto.
* main.c (main): Sanitize program name detection on Windows.
* makeint.h: 'program' is a const string on all platforms now.
* tests/run_make_tests.bat: Windows bat file to invoke tests
* tests/test_driver.pl: Obtain system-specific error messages.
(get_osname): Compute the $port_type here. Add more $osname checks
for different Windows Perl ports.
(_run_command): Rewrite the timeout capability to work properly
with Windows. Don't use Perl fork/exec; instead use system(1,...)
which allows a more reliable/proper kill operation.
Also, allow options to be given as a list instead of a string, to
allow more complex quoting of command-line arguments.
* tests/run_make_tests.pl (run_make_with_options): Allow options
to be provided as a list in addition to a simple string.
(set_more_defaults): Write sample makefiles and run make on them
instead of trying to run echo and invoking make with -f-, to avoid
relying on shell and echo to get basic configuration values. Also
create a $sh_name variable instead of hard-coding /bin/sh.
* tests/scripts/features/archives: Skip on Windows.
* tests/scripts/features/escape: Use list method for passing options.
* tests/scripts/features/include: Use system-specific error messages.
* tests/scripts/features/output-sync: "Command not found" errors
generate very different / odd output on Windows. This needs to be
addressed but for now disable these tests on Windows.
* tests/scripts/functions/abspath: Disable on Windows.
* tests/scripts/functions/file: Use system-specific error messages.
* tests/scripts/functions/shell: "Command not found" errors generate
very different / odd output on Windows. This needs to be addressed
but for now disable these tests on Windows.
* tests/scripts/misc/close_stdout: Disable on Windows.
* tests/scripts/options/dash-k: Use system-specific error messages.
* tests/scripts/options/dash-l: Disable on Windows.
* tests/scripts/options/eval: Use list method for passing options.
* tests/scripts/options/general: Skip some non-portable tests.
* tests/scripts/targets/ONESHELL: Skip some non-portable tests.
* tests/scripts/targets/POSIX: Skip some non-portable tests.
* tests/scripts/variables/MAKEFILES: Skip some non-portable tests.
* tests/scripts/variables/SHELL: Use a makefile not -f- for testing.
* job.c (reap_children) [WINDOWS32]: Avoid recursive call to
reap_children when the argument passed to
map_windows32_error_to_string is negative or too large.
* make.1: Document the -E and --eval options.
* doc/make.texi: Document the -E option.
* tests/scripts/options/eval: Test the -E option and MAKEFILES.
* NEWS: Add information about the new option.
* make.1: Document the new flag.
* doc/make.texi: Document the new flag. Remove suggestions that the
.SILENT special target is deprecated or should not be used.
* tests/scripts/options/dash-s: Test the -s and --no-silent options.
* NEWS: Add information about the new option.
* read.c (eval_makefile): Set deps->error if we discovered any
error reading makefiles, and set NONEXISTENT_MTIME so we know
it needs to be rebuilt.
* main.c (main): Clean up management of makefile_mtimes.
* tests/scripts/features/include: Add open failure testcases.
* tests/test_driver.pl: Save error strings for later comparison.
* tests/run_make_tests.pl: Create portable commands for later use.
* tests/*: Use these new variables.
* NEWS: Document the change, as a backward-incompatible change.
* main.c (main): Add 'nocomment' to the .FEATURES variable.
* read.c (remove_comments): Skip variable references during remove.
(find_char_unquote): Fix comments for new STOPMAP support.
* tests/scripts/features/escape: Test new escape syntax.
* tests/scripts/functions/guile: Ditto.
* tests/scripts/functions/shell: Ditto.
