This should have fixed the problems that some users were reporting with
https://github.com/zed-industries/zed/pull/10695 .
The problem was with devices which send more than one valuator axis in a
single event whereas the original PR assumed there would only ever be
one axis per event. This version also does away with the complicated
device selection and instead just uses the master pointer device, which
automatically uses all sub-pointers.
Edit: Confirmed working for one of the user's which the first attempt
was broken for.
Release Notes:
- Added smooth scrolling for X11 on Linux
- Added horizontal scrolling for X11 on Linux
This is a follow up of #10810 , `embed-resource` crate uses a different
method to link the manifest file, so this makes moving manifest file to
`gpui` possible.
Now, examples can run as expected:
TODO:
- [ ] check if it builds with gnu toolchain
Release Notes:
- N/A
Release Notes:
- N/A
Picks up https://github.com/kvark/blade/pull/113 and a bunch of other
fixes.
Should prevent the exclusive full-screen on Vulkan - related to #9728
cc @kazatsuyu
Note: this PR doesn't enable transparency, this is left to follow-up
Reverts zed-industries/zed#10695
Some users are experiencing broken scrolling due to the changes from
this PR, so it should be reverted while I investigate what causes the
problems.
Release Notes:
- N/A
Changes the X11 platform code to use the xinput extension which allows
for smooth scrolling and horizontal scrolling.
Release Notes:
- Added smooth scrolling to X11 on Linux
- Added horizontal scrolling to X11 on Linux
Currently in Zed, certain characters require pressing the key twice to
move the caret through that character. For example: "❤️" and "y̆".
The reason for this is as follows:
Currently, Zed uses `chars` to distinguish different characters, and
calling `chars` on `y̆` will yield two `char` values: `y` and `\u{306}`,
and calling `chars` on `❤️` will yield two `char` values: `❤` and
`\u{fe0f}`.
Therefore, consider the following scenario (where ^ represents the
caret):
- what we see: ❤️ ^
- the actual buffer: ❤ \u{fe0f} ^
After pressing the left arrow key once:
- what we see: ❤️ ^
- the actual buffer: ❤ ^ \u{fe0f}
After pressing the left arrow key again:
- what we see: ^ ❤️
- the actual buffer: ^ ❤ \u{fe0f}
Thus, two left arrow key presses are needed to move the caret, and this
PR fixes this bug (or this is actually a feature?).
I have tried to keep the scope of code modifications as minimal as
possible. In this PR, Zed handles such characters as follows:
- what we see: ❤️ ^
- the actual buffer: ❤ \u{fe0f} ^
After pressing the left arrow key once:
- what we see: ^ ❤️
- the actual buffer: ^ ❤ \u{fe0f}
Or after pressing the delete key:
- what we see: ^
- the actual buffer: ^
Please note that currently, different platforms and software handle
these special characters differently, and even the same software may
handle these characters differently in different situations. For
example, in my testing on Chrome on macOS, GitHub treats `y̆` as a
single character, just like in this PR; however, in Rust Playground,
`y̆` is treated as two characters, and pressing the delete key does not
delete the entire `y̆` character, but instead deletes `\u{306}` to yield
the character `y`. And they both treat `❤️` as a single character,
pressing the delete key will delete the entire `❤️` character.
This PR is based on the principle of making changes with the smallest
impact on the code, and I think that deleting the entire character with
the delete key is more intuitive.
Release Notes:
- Fix caret movement issue for some special characters
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
Due to: https://github.com/zed-industries/zed/issues/9985 and an
abundance of caution, I'm reverting the image and svg rendering updates
for now until we can debug the issue. cc: @niklaswimmer
Release Notes:
- N/A
This PR hoists the `profile.dev.package` settings for compiling the
`resvg` crate with optimizations up to the workspace level, since Cargo
was complaining:
```
warning: profiles for the non root package will be ignored, specify profiles at the workspace root:
package: /Users/maxdeviant/projects/zed/crates/gpui/Cargo.toml
workspace: /Users/maxdeviant/projects/zed/Cargo.toml
```
Release Notes:
- N/A
This is a follow up to #9436 . It has a cleaner API and generalized the
image_cache to be a generic asset cache, that all GPUI elements can make
use off. The changes have been discussed with @mikayla-maki on Discord.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
This PR extracts the `SemanticVersion` out of `util` and into its own
`SemanticVersion` crate.
This allows for making use of `SemanticVersion` without needing to pull
in some of the heavier dependencies included in the `util` crate.
As part of this the public API for `SemanticVersion` has been tidied up
a bit.
Release Notes:
- N/A
Updated version of #9741 with fixes for the problems raised in #9774. I
only verified that the images no longer look blueish on Linux, because I
don't have a Mac.
cc @osiewicz
Release Notes:
- N/A
---------
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
The latest update to resvg bumped some transitive dependencies
which lead to duplicates. The update to the image dependency
unifies most of their versions again.
Most notably, gif and kurbo are still duplicated, which is best fixed
downstream however.
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
This removes bindgen and cbindgen from the dependency graph on non-macos
systems, improving compile times on those systems.
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
Tested on my laptop, and I've noticed that when I move the window,
`WindowsPlatform::displays()` is being continuously called. Is this
intended?
Release Notes:
- N/A
Switch to using `x11rb` crate instead of current `xcb` crate for gpui's
x11 platform.
Also fixes the crash on resize, and white flashing on resize.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR moves the Clippy configuration up to the workspace level.
We're using the [`lints`
table](https://doc.rust-lang.org/cargo/reference/workspaces.html#the-lints-table)
to configure the Clippy ruleset in the workspace's `Cargo.toml`.
Each crate in the workspace now has the following in their own
`Cargo.toml` to inherit the lints from the workspace:
```toml
[lints]
workspace = true
```
This allows for configuring rust-analyzer to show Clippy lints in the
editor by using the following configuration in your Zed `settings.json`:
```json
{
"lsp": {
"rust-analyzer": {
"initialization_options": {
"check": {
"command": "clippy"
}
}
}
}
```
Release Notes:
- N/A
This change implements gpui's credentials API for the linux platform,
using the [`oo7`](https://lib.rs/crates/oo7) library.
We had a short discussion on Discord about where to store credentials
and landed on the two dbus APIs
[`org.freedesktop.Secrets`](https://specifications.freedesktop.org/secret-service/latest/index.html)
and
[`org.freedesktop.portal.Secrets`](https://flatpak.github.io/xdg-desktop-portal/docs/doc-org.freedesktop.portal.Secret.html).
The first one provides access to a more or less general purpose
keystore, the second provides a way of obtaining a unique masterkey
which in turn can be used for encrypting stuff and storing it to disk
(especially interesting for sandboxed apps, think flatpak/snap).
I decided to give the implementation a try with `oo7`, which uses the
portal if the app is sandboxed and the secret service otherwise. If we
do not want to use that library, we would probably have to more or less
copy its functionality anyways. I also heard rumors of eventually
changing the credentials API and I think this implementation serves as a
starting point to discuss the need for this?
With a working credentials implementation the sign in button now works
(it panicked before).
Todos:
- [x] implement keystore unlocking
- [x] try the change with oo7's tracing enabled?
- [x] test the password deletion
Release Notes:
- N/A
---------
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Associates every window with its own refresh event. Removes the use of
X11 present.
Alternative to #8592.
Instead of doing the rendering on idle and then involving a hack for
polling X11 events, this PR just tries to do the rendering inside the
main loop. This guarantees that we continue to poll for events after the
draw, and not get screwed by the driver talking to X11 via the same file
descriptor.
Release Notes:
- N/A
This practice makes it difficult to locate todo!s in my code when I'm
working. Let's take out the bang if we want to keep doing this.
Release Notes:
- N/A
This PR unifies the event loop code for Wayland and X11. On Wayland,
blocking dispatch is now used. On X11, the invisible window is no longer
needed.
Release Notes:
- N/A
---------
Co-authored-by: Dzmitry Malyshau <kvark@fastmail.com>
Co-authored-by: Tadeo Kondrak <me@tadeo.ca>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Co-authored-by: julia <julia@zed.dev>
This is a follow up to #7945. The current behaviour reads the locale and
infers from that which type of time format should be used (12 hour/24
hour).
However, in macOS you can override this behaviour, e.g. you can use
en_US locale but still use the 24 hour clock format (Can be customized
under Settings > General > Date & Format > 24-hour time). You can even
customize the date format.
This PR uses the macOS specific `CFDateFormatter` API, which outputs
time format strings, that respect those settings.
Partially fixes#7956 (as its not implemented for linux)
Release Notes:
- Added localization support for all macOS specific date and time
configurations in chat
[Profiling](https://crates.io/crates/profiling) crate allows easy
integration with various profiler tools. The best thing is - annotations
compile to nothing unless you request a specific feature.
For example, I used this command to enable Tracy support:
```bash
cargo run --features profiling/profile-with-tracy
```
At the same time I had Tracy tool open and waiting for connection. It
gathered nice stats from the run:
Release Notes:
- N/A
This PR enables server side decorations on Wayland if possible. This is
stopgap solution, so that the window can be moved, resized and dragged
on Wayland sessions at all.
Since Wayland compositors can decide to force either mode (as in,
forcing server or client side decorations), this requires additional
handling in zed. Since zed doesn't provide any of that handling as of
now, as a temporary solution server side decorations are always
requested.
Adds initial keyboard and mouse input for Wayland (thanks to @gabydd and
@kvark for reference).
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Depends on https://github.com/zed-industries/font-kit/pull/2 and
https://github.com/kvark/blade/pull/77
This change enables Blade to be also used on MacOS. It will also make it
easier to use it on Windows.
What works: most of the things. Zed loads as fast and appears equally
responsive to the current renderer.
<img width="306" alt="Screenshot 2024-02-11 at 12 09 15 AM"
src="https://github.com/zed-industries/zed/assets/107301/66d82f45-5ea2-4e2b-86c6-5b3ed333c827">
Things missing:
- [x] video streaming. ~~Requires a bit of plumbing on both Blade and
Zed sides, but all fairly straightforward.~~
- verified with a local setup
- [x] resize. ~~Not sure where exactly to hook up the reaction on the
window size change. Once we know where, the fix is one line.~~
- [ ] fine-tune CA Layer
- this isn't a blocker for merging the PR, but it would be a blocker if
we wanted to switch to the new path by default
- [ ] rebase on latest, get the dependency merged (need review/merge of
https://github.com/zed-industries/font-kit/pull/2!)
Update: I implemented resize support as well as "surface" rendering on
the Blade path (which will be useful on Linux/Windows later on). I
haven't tested the latter though - not sure how to get something
streaming. Would appreciate some help! I don't think this should be a
blocker to this PR, anyway.
The only little piece that's missing for the Blade on MacOS path to be
full-featured is fine-tuning the CALayer configuration. Zed does a lot
of careful logic in configuring the layer, such as switching the
"present with transaction" on/off intermittently, which Blade path
doesn't have yet.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Upgraded Taffy to v0.4.0 from crates.io (previously using prerelease
version from git).
Code changes required were minor as gpui was already using a recent
version of Taffy.
Release Notes:
- N/A
This PR adds Wayland support to gpui using
[wayland-rs](https://github.com/Smithay/wayland-rs). It is based on
[#7598](https://github.com/zed-industries/zed/pull/7598).
It detects Wayland support at runtime by checking the existence of the
`WAYLAND_DISPLAY` environment variable. If it does not exist or is
empty, the X11 backend will be used. To use the X11 backend in a Wayland
session (for development purposes), you just need to unset
WAYLAND_DISPLAY (`WAYLAND_DISPLAY= cargo run ...`).
At the moment it only creates the window and renders the initial content
provided by `BladeRenderer`, so it can run "Hello world" example.
Todo:
- [x] Add basic Wayland support.
- [x] Add window resizing.
- [x] Add window closing.
- [x] Add window updating.
- [ ] Implement input handling, fractional scaling, and support other
Wayland protocols.
- [ ] Implement all unimplemented todo!(linux).
- [ ] Add window decorations or use custom decorations (like on MacOS).
- [ ] Address other missing functionality.
Release Notes:
- N/A
---------
Co-authored-by: gabydd <gabydinnerdavid@gmail.com>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Alternative to #7758, which doesn't involve adding a new trait method
`request_draw`.
Somehow, my whole screen goes blinking black with this when moving the
window, so not ready for landing.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This is a rebase of @gabydds text_system updates. with some small
cleanups.
Currently cannot test this as build is not working in linux. Im just
putting it up here before I forget about it.
---------
Co-authored-by: gabydd <gabydinnerdavid@gmail.com>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR sorts the dependency lists in our `Cargo.toml` files so that
they are in alphabetical order.
This should make them easier to visually scan when looking for a
dependency.
Apologies in advance for any merge conflicts 🙈
Release Notes:
- N/A
Was moved by mistake in: ebbe52e6b0
This was throwing errors everywhere on Linux because anyhow is needed by
the code and is not macOS dependent.
Release Notes:
- N/A
This removes one of the path dependencies in gpui that's only really
needed by `workspace` (which can work around lack of these
implementations by itself). In theory it should also improve build
scheduling (as gpui doesn't have to wait for main dependency of sqlez -
libsqlite3 - to finish it's 25 seconds-long build in release), though in
practice I didn't notice a substantial improvement.
Moreover `sqlez` was unused by `settings` too, so that's removed
as well.
Release Notes:
- N/A
This PR mainlines the current state of new GPUI2-based UI from the
`gpui2-ui` branch.
Release Notes:
- N/A
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Nate <nate@zed.dev>
