This removes uses of `DescendantRebaser::new` or
`MutRepo::create_descendant_rebaser` from most tests. The exceptions are the
tests having to do with abandoning empty commits on rebase, since adjusting
those is a bit more elaborate (see follow-up commits).
A possible use case is when doing some archaeology around a certain operation.
The current implementation is quadratic if + is repeated. Suppose op_id is
usually close to the current op heads, I think it'll practically work better
than building a reverse lookup table.
My jj repo contains such head commits, and "jj debug reindex" fails. To address
this problem, we'll probably need to implement GC, and the user will discard
operations before the first bad op id.
This requires creating a new public API as a substitute. I took the opportunity
to also add some comments to the
`MutRepo::record_rewritten_commit`/`record_abandoned_commit` functions.
I imade the simplest possible addition to the API; it is not a very elegant
one. Eventually, the entire `record_rewritten_commit` API should probably be
refactored again.
I also added some comments explaining what these functions do.
Spotted while adding error propagation there. This wouldn't likely be a real
problem because "jj debug reindex" removes all of the operation links.
The "} else {" condition is removed because it doesn't make sense to exclude
only the exact parent_op_id operation. This can be optimized to not walk
ancestors of the parent_op_id operation, but I don't see a motivation to add
tests covering such scenarios. It's pretty rare that an intermediate operation
link is missing.
We'll probably need a better abstraction, but a separate method is good
enough to remove unsafe code from ReadonlyRepo.
I'm not sure if this is feasible for the other backends, but I guess there
would be less lifetimed variables than DefaultReadonlyIndex.
It seems better to have the caller pass the transaction description
when we finish the transaction than when we start it. That way we have
all the information we want to include more readily available.
Previously, the function relied on both the `self.parent_mapping` and
`self.rebased`. If `(A,B)` was in `parent_mapping` and `(B,C)` was in `rebased`,
`new_parents` would map `A` to `C`.
Now, `self.rebased` is ignored by `new_parents`. In the same situation,
DescendantRebaser is changed so that both `(A,B)` and `(B,C)` are in
`parent_mapping` before. `new_parents` now applies `parent_mapping` repeatedly,
and will map `A` to `C` in this situation.
## Cons
- The semantics are changed; `new_parents` now panics if `self.parent_mapping`
contain cycles. AFAICT, such cycles never happen in `jj` anyway, except for
one test that I had to fix. I think it's a sensible restriction to live with;
if you do want to swap children of two commits, you can call
`rebase_descendants` twice.
## Pros
- I find the new logic much easier to reason about. I plan to extract it into a
function, to be used in refactors for `jj rebase -r` and `jj new --after`. It
will make it much easier to have a correct implementation of `jj rebase -r
--after`, even when rebasing onto a descendant.
- The de-duplication is no longer O(n^2). I tried to keep the common case fast.
## Alternatives
- We could make `jj rebase` and `jj new` use a separate function with the
algorithm shown here, without changing DescendantRebaser. I believe that the new
algorithm makes DescendatRebaser easier to understand, though, and it feels more
elegant to reduce code duplication.
- The de-duplication optimization here is independent of other changes, and
could be used on its own.
default_index_store.rs is relatively big, and it contains types and impls in
arbitrary order. Let's split them into sub modules. After everything moved,
mod.rs will only contain tests.
The wrapper type isn't needed for the mutable layer, but this mirrors the
readonly type structure. Test cases are also migrated to be using the index
wrapper so long as we don't have to care for the nesting of the segment files.
Gitoxide errors don't implement PartialEq. We could instead stringify the
errors, but there aren't many callers who expect FailedRefExportReason to
be comparable.
I think this is a variant of the problem fixed by 7fda80fc22 "tree: simplify
conflict before resolving at hunk level." We need to simplify() the conflict
before and after extracting file ids because the source conflict values may
contain trees to be cancelled out, and the file values may differ only in exec
bits. Since the legacy tree passes a simplified conflict in to this function,
I made the merged tree do the same.
Fixes#2654
Otherwise an empty subtree would be added to the parent tree.
If the stored tree contained an empty subtree, simplify() wouldn't work
against new "absent" subtree representation. I don't know if there's a
such code path, but I believe it's very rare to encounter the problem.
#2654
In snapshot(), changed_file_states are received in arbitrary order. For the
other callers, entries are in diff_stream order, so we don't have to sort
them.
With watchman enabled, we can see the cost of sorting the sorted proto entries.
I don't think this is significant, but we can mitigate it by adding
is_file_states_sorted flag to the proto message if needed:
```
% hyperfine --sort command --warmup 3 --runs 20 -L bin jj-0,jj-1 \
"target/release-with-debug/{bin} -R ~/mirrors/linux files ~/mirrors/linux/no-match"
Benchmark 1: target/release-with-debug/jj-0 -R ~/mirrors/linux files ~/mirrors/linux/no-match
Time (mean ± σ): 164.8 ms ± 16.6 ms [User: 50.2 ms, System: 111.7 ms]
Range (min … max): 148.1 ms … 195.0 ms 20 runs
Benchmark 2: target/release-with-debug/jj-1 -R ~/mirrors/linux files ~/mirrors/linux/no-match
Time (mean ± σ): 171.8 ms ± 13.6 ms [User: 61.7 ms, System: 109.0 ms]
Range (min … max): 159.5 ms … 192.1 ms 20 runs
```
Without watchman:
```
% hyperfine --sort command --warmup 3 --runs 20 -L bin jj-0,jj-1 \
"target/release-with-debug/{bin} -R ~/mirrors/linux files ~/mirrors/linux/no-match"
Benchmark 1: target/release-with-debug/jj-0 -R ~/mirrors/linux files ~/mirrors/linux/no-match
Time (mean ± σ): 367.3 ms ± 30.3 ms [User: 1415.2 ms, System: 633.8 ms]
Range (min … max): 325.4 ms … 421.7 ms 20 runs
Benchmark 2: target/release-with-debug/jj-1 -R ~/mirrors/linux files ~/mirrors/linux/no-match
Time (mean ± σ): 327.7 ms ± 24.9 ms [User: 1059.1 ms, System: 654.3 ms]
Range (min … max): 296.0 ms … 385.4 ms 20 runs
```
I haven't measured snapshotting against dirty working copy, but I don't think
it would be slower than the original implementation.
This enables cheap str-to-RepoPath cast, which is useful when sorting and
filtering a large Vec<(String, _)> list by using matcher for example. It
will also eliminate temporary allocation by repo_path.parent().
I'm going to add borrowed RepoPath type, and most from_internal_string()
callers will be migrated to it. For the remaining callers, it makes more
sense to move the ownership of String to RepoPathBuf.
RepoPath::from_components() is removed since it is no longer a primitive
function.
The components iterator could be implemented on top of str::split(), but
it's not as we'll probably want to add components.as_path() -> &RepoPath.
Tree walking and tree_states map construction get slightly faster thanks to
fewer allocations and/or better cache locality. If we add a borrowed RepoPath
type, we can also implement a cheap &str to &RepoPath conversion on top. Then,
we can get rid of BTreeMap<RepoPath, FileState> construction at all.
Snapshot without watchman:
```
% hyperfine --sort command --warmup 3 --runs 10 -L bin jj-0,jj-1 \
"target/release-with-debug/{bin} -R ~/mirrors/linux status"
Benchmark 1: target/release-with-debug/jj-0 -R ~/mirrors/linux status
Time (mean ± σ): 950.1 ms ± 24.9 ms [User: 1642.4 ms, System: 681.1 ms]
Range (min … max): 913.8 ms … 990.9 ms 10 runs
Benchmark 2: target/release-with-debug/jj-1 -R ~/mirrors/linux status
Time (mean ± σ): 872.1 ms ± 14.5 ms [User: 1922.3 ms, System: 625.8 ms]
Range (min … max): 853.2 ms … 895.9 ms 10 runs
Relative speed comparison
1.09 ± 0.03 target/release-with-debug/jj-0 -R ~/mirrors/linux status
1.00 target/release-with-debug/jj-1 -R ~/mirrors/linux status
```
Tree walk:
```
% hyperfine --sort command --warmup 3 --runs 10 -L bin jj-0,jj-1 \
"target/release-with-debug/{bin} -R ~/mirrors/linux files --ignore-working-copy"
Benchmark 1: target/release-with-debug/jj-0 -R ~/mirrors/linux files --ignore-working-copy
Time (mean ± σ): 375.3 ms ± 15.4 ms [User: 223.3 ms, System: 151.8 ms]
Range (min … max): 359.4 ms … 394.1 ms 10 runs
Benchmark 2: target/release-with-debug/jj-1 -R ~/mirrors/linux files --ignore-working-copy
Time (mean ± σ): 357.1 ms ± 16.2 ms [User: 214.7 ms, System: 142.6 ms]
Range (min … max): 341.6 ms … 378.9 ms 10 runs
Relative speed comparison
1.05 ± 0.06 target/release-with-debug/jj-0 -R ~/mirrors/linux files --ignore-working-copy
1.00 target/release-with-debug/jj-1 -R ~/mirrors/linux files --ignore-working-copy
```
This is a step towards introducing a borrowed RepoPath type. The current
RepoPath type is inefficient as each component String is usually short. We
could apply short-string optimization, but still each inlined component would
consume 24 bytes just for e.g. "src", and increase the chance of random memory
access. If the owned RepoPath type is backed by String, we can implement cheap
cast from &str to borrowed &RepoPath type.
`RevsetExpression::resolve()` is meant for programmatically created
expressions. In particular, it may not contain symbols. Let's try to
clarify that by renaming the function and documenting it.
Hopefully this will fix the unfinished Windows CI issue. A possible scenario
is that recent migration to gitoxide made this test flaky on Windows. For
example, gitoxide might have in-memory object cache that relies on file mtime,
and occasionally fails to detect new object on Windows.
If a commit pointed to by HEAD or ref is missing, the ref is considered
invalid and excluded by import_refs(). The current test behavior appears to
depend on some in-memory cache of git2::Repository.
GitBackend will use it to configure gix::Repository. I think UserSettings
is generally useful to pass store-specific parameters, so I've updated all
factory functions.
As discussed in Discord, it's less useful if remote_branches() included
Git-tracking branches. Users wouldn't consider the backing Git repo as
a remote.
We could allow explicit 'remote_branches(remote=exact:"git")' query by changing
the default remote pattern to something like 'remote=~exact:"git"'. I don't
know which will be better overall, but we don't have support for negative
patterns anyway.
