The feature was never finished (crbug.com/911799), but adds a
build-time dependency on the trunks proto in platform2.
BUG=b:193267897
TEST=cargo build with and without tpm feature
Change-Id: I7299ba0779bb04ebca6284cfd11873e99500c993
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3043491
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Dennis Kempin <denniskempin@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
fs/worker.rs and fs/mod.rs were still using the old std::sync::Mutex
version instead of the crosvm-specific wrapper sync::Mutex
BUG=b:179636297
TEST=build crosvm and run shared-dir with virtio-fs
Change-Id: I773a885fd0ef35e25bc7a090f067d8a6f60636da
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3058837
Auto-Submit: Morg <morg@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Morg <morg@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
This CL adds support for the VIRTIO_VIDEO_CONTROL_BITRATE_PEAK control
to the crosvm encoder. This control allows configuring the peak bitrate
used when encoding a video. The peak bitrate is only used when the
bitrate mode is set to VBR (variable bitrate), and is ignored for CBR
(constant bitrate).
BUG=b:190336806,b:181514834
TEST=tast run DUT arc.VideoEncodeAccel.h264_192p_i420
Cq-Depend: chromium:2946469
Change-Id: Ie513b474f48f09a710a68c9f06111e0fc6627aa6
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2944321
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: David Staessens <dstaessens@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
... by not holding locks while data is being copied around, but only
when the buffers are being allocated.
BUG=b:174713663
Change-Id: I558e14422eeff690c09f031f6c5564ee7de21e39
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2994806
Tested-by: kokoro <noreply+kokoro@google.com>
Auto-Submit: Jorge Moreira Broche <jemoreira@google.com>
Commit-Queue: Jorge Moreira Broche <jemoreira@google.com>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
When VIRTIO_GPU_BLOB_FLAG_CREATE_GUEST_HANDLE is not set, the check
should not be applied. This is also more consistent with
GpuCommand::ResourceAttachBacking.
When VIRTIO_GPU_BLOB_FLAG_CREATE_GUEST_HANDLE is set, the check may not
be correct because upstream kernel made the limit configurable recently
https://patchwork.freedesktop.org/patch/438905/
It should be better to just remove the check and let the kernel does the
validation.
BUG=b:194314538
TEST=huge allocations
Change-Id: I536f44b257a96f7a52a0bc88fc2b63e0e2a701f5
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3059400
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dennis Kempin <denniskempin@google.com>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Commit-Queue: Chia-I Wu <olv@google.com>
At crrev.com/c/2719245, we postpone sending the decoded frames until
receiving the buffer. However, we should also keep the order between
decoded frames and the flush complete event. This CL handles both
event response together to preserve the order.
BUG=b:168750131
BUG=b:192523692
TEST=android.mediav2.cts.CodecDecoderSurfaceTest#testFlushNative
TEST=android.media.cts.AdaptivePlaybackTest
Change-Id: I9184790c855c7d60455d1f71daad768200adc468
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3005181
Auto-Submit: Chih-Yu Huang <akahuang@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Chih-Yu Huang <akahuang@chromium.org>
Reviewed-by: Keiichi Watanabe <keiichiw@chromium.org>
The `# ignored by ebuild` tag will remove the path to libcras_stub and
allows crosvm to be built with the actual libcras implementation.
This allows all other platforms to build without depending on
`third_party/adhd/cras/client/libcras`, which is a prerequisite for
externalizing crosvm.
An empty libcras_stub crate is provided to keep cargo happy in external
builds.
To build with cargo against libcras, the setup_cros_cargo.sh script
can be used.
BUG=b:191511078
TEST=Tests in crosvm and cros_sdk both pass:
$ ./test_all
$ cros_run_unit_tests --package=crosvm
Cq-Depend: chromium:2993483
Change-Id: I86aad23a86c78e580c1724fb311f870b25d6b09e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2988154
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Dennis Kempin <denniskempin@google.com>
Reviewed-by: Chih-Yang Hsia <paulhsia@chromium.org>
This CL adds support for the VIRTIO_VIDEO_CONTROL_BITRATE_MODE control
to the crosvm encoder. This control allows configuring the bitrate
mode used to encode a video.
Possible values are:
- VIRTIO_VIDEO_BITRATE_MODE_VBR (Variable bitrate)
- VIRTIO_VIDEO_BITRATE_MODE_CBR (Constant bitrate)
BUG=b:190336806,b:181514834
TEST=tast run DUT arc.VideoEncodeAccel.h264_192p_i420_vm
Cq-Depend: chromium:2946469
Change-Id: Ic8461e746884620cd426c1b562724e4120fe2129
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2944317
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: David Staessens <dstaessens@chromium.org>
Reviewed-by: Keiichi Watanabe <keiichiw@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
The VioSClient object has no reason to keep track of stream states,
except maybe to validate operations, but for that it can simply rely on
the sound server to do it for it.
BUG=b:174713663
Change-Id: Ia0bb1675f4cbfb2714feebe63aec8d75e54c1588
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2986401
Auto-Submit: Jorge Moreira Broche <jemoreira@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Jorge Moreira Broche <jemoreira@google.com>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
CL crrev.com/c/3005194 introduced changes to the encoder to allow
dynamic framerate changes even when there are already resources queued
in the input or output queue. As a side effect the encoder is only
recreated if any parameters besides the framerate change.
Unfortunately the above checks assumes that changing the framerate will
never influence any of the other parameters, which isn't always
correct. The requested H.264 level is adjusted to conform to the
minimum requirements for the selected bitrate and framerate. We can't
dynamically adjust the H.264 level during encoding, but as long as we
don't have any resources queued yet we can recreate the encoder to make
sure the H.264 level is properly adjusted if required.
BUG=b:192623395,b:192419592,b:193947502
TEST=android.media.cts.MediaRecorderTest#testProfileAvcBaselineLevel1
Change-Id: Ie02e30a5b6fb82b9b62e88ae3ab75c8ef42f3844
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3037296
Tested-by: kokoro <noreply+kokoro@google.com>
Auto-Submit: David Staessens <dstaessens@chromium.org>
Commit-Queue: David Staessens <dstaessens@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
This reverts commit c6554e9c7e.
Reason for revert:
`time tast run mycros arc.Boot.vm` will always halt at
```
Waiting for Android boot
Waiting for initial ARC process
```
till timeout.
Original change's description:
> virtqueue: Try to further reduce unnecessary interrupts
>
> Try to reduce unnecessary interrupts by updating `signalled_used` every
> time we check `used_event` rather than only when we actually write to
> the eventfd.
>
> This technique is lifted out of the vhost_add_used_n and vhost_notify
> methods in drivers/vhost/vhost.c in the kernel and the variable names
> are changed to more easily compare the two implmentations.
>
> This combined with the other notification suppression changes give a
> performance improvement of ~10% across all storage devices in the
> blogbench benchmark.
>
> BUG=none
> TEST=vm.Blogbench.{p9,block,virtiofs}
>
> Change-Id: I618767e4c36ecae607b7641e54a029c25583844d
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3026691
> Tested-by: kokoro <noreply+kokoro@google.com>
> Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
> Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
BUG=b:194452080
TEST=time tast run mycros arc.Boot.vm
Change-Id: Ib7511dec3e0df26be54616f20226ded598fc8a37
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3051292
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Auto-Submit: Chih-Yang Hsia <paulhsia@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Try to reduce unnecessary interrupts by updating `signalled_used` every
time we check `used_event` rather than only when we actually write to
the eventfd.
This technique is lifted out of the vhost_add_used_n and vhost_notify
methods in drivers/vhost/vhost.c in the kernel and the variable names
are changed to more easily compare the two implmentations.
This combined with the other notification suppression changes give a
performance improvement of ~10% across all storage devices in the
blogbench benchmark.
BUG=none
TEST=vm.Blogbench.{p9,block,virtiofs}
Change-Id: I618767e4c36ecae607b7641e54a029c25583844d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3026691
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Now that the get and set methods have the proper memory barriers it
should be safe to re-enable this.
BUG=none
TEST=crostini.Basic.buster_stable; reboot arcvm in a loop for 75
iterations without observing a hang
Change-Id: I03271d838e31ad091536163359836bead7e00178
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3026690
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
This reverts commit e470ef9933.
Reason for revert: possibly breaks critical test, in turn CQ.
Original change's description:
> devices: irqchip: add need_halted function
>
> This allows irqchip implementations to specify whether they need to be
> notified via the halted() function when the vCPU encounters a HLT
> instruction.
>
> All of the current in-tree irqchip implementations do nothing on
> halted(), so this will always return false for now, but a fully
> userspace irqchip would need these notifications.
>
> Querying this function will allow the hypervisor code to determine
> whether disabling VM exits on HLT instructions is allowed.
>
> BUG=b:181106085
> TEST=test_all
>
> Change-Id: I433fe208d125dcd14e7100ce5aff37474b423a83
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2937304
> Reviewed-by: Colin Downs-Razouk <colindr@google.com>
> Reviewed-by: Zach Reizner <zachr@chromium.org>
> Tested-by: kokoro <noreply+kokoro@google.com>
> Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Bug: b:181106085
BUG=b:194452080
Change-Id: I755fc732e79a56f0306819e23ba9bd6c840dc927
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3045583
Commit-Queue: Leo Lai <cylai@google.com>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Owners-Override: Leo Lai <cylai@google.com>
Auto-Submit: Leo Lai <cylai@google.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
The devices to be notified on resume are unrelated to the functionality
of Bus, which is looking up devices in an address space. Additionally,
each Bus instance had its own list of devices to notify, although in
practice, only the one in the I/O bus was used.
Move the resume_notify_devices list into RunnableLinuxVm instead.
BUG=None
TEST=Boot Crostini on x86 and arm
Change-Id: I72c629c6d6589c4a9350831c8a076c5c0c9f9aeb
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3043489
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Tomasz Jeznach <tjeznach@chromium.org>
This allows irqchip implementations to specify whether they need to be
notified via the halted() function when the vCPU encounters a HLT
instruction.
All of the current in-tree irqchip implementations do nothing on
halted(), so this will always return false for now, but a fully
userspace irqchip would need these notifications.
Querying this function will allow the hypervisor code to determine
whether disabling VM exits on HLT instructions is allowed.
BUG=b:181106085
TEST=test_all
Change-Id: I433fe208d125dcd14e7100ce5aff37474b423a83
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2937304
Reviewed-by: Colin Downs-Razouk <colindr@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
This should reduce the number of interrupts generated by the device as
well as the number of vm exits triggered by the guest for notifying the
device.
BUG=none
TEST=crostini.*; reboot arcvm in a loop for 30 iterations without
observing a hang
Change-Id: Iea4a59092ba6306de9eecbb7722d0ae356183272
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3026689
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
In order to enable the VIRTIO_RING_F_EVENT_IDX feature, devices need to
keep processing the queue until it is empty as the guest may not send
any more notifications until the device has processed all pending
messages.
Change the process_queue method to process all messages in the queue.
BUG=none
TEST=????
Change-Id: I7df56111ad99bc7511c685ecafc051aef077b34e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3026688
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
When the VIRTIO_RING_F_EVENT_IDX feature is enabled we will
automatically update avail_event when a descriptor from the queue is
popped. Having update_int_required set this to a different value means
that it would keep going back and forth.
BUG=none
TEST=crostini.Basic.buster_stable
Change-Id: I9098259c306cf19c034656169ee0e70ad69d1c64
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3026687
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Have all devices trigger interrupts via the Queue rather than directly.
This way we can skip sending the interrupt entirely when notification
suppression features have been negotiated with the guest kernel.
BUG=none
TEST=crostini.Basic.buster_stable
Change-Id: Ica6f978127aa648fd983f641518940d7a857916f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3026686
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
This is needed because virtio IOMMU may not allow writes to mapped
memory if VIRTIO_IOMMU_MAP_F_WRITE flag is not set in driver MAP
request.
BUG=b:181736020
TEST=--vfio=/sys/bus/pci/devices/0000:00:14.0,iommu=on
Change-Id: I2c101410594782f1b66b3f6ae527d4a7621b7496
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2757279
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: David Stevens <stevensd@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
In VT-d, the IOMMU hardware can translate guest physical address that
is no more than MGAW (Maximum Guest Address Width) which is reported
from the VT-d Capability register.
We pass this information to the guest IOMMU front driver so that it
can allocate appropriate IOVA.
VT-d indicates that "implementations must support MGAW at least equal
to the physical addressability (host address width) of the platform".
Thus we take the Physical Address Bits that is reported by
CPUID.80000008H as the minimum MGAW.
BUG=b:181736020
TEST=--vfio=/sys/bus/pci/devices/0000:00:14.0,iommu=on
Change-Id: I26a421ea2e7dd893d413d63ab313721cfdf0b5c1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2757278
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: David Stevens <stevensd@chromium.org>
A completed fence callback is set in Rutabaga. When the callback
is executed, the descriptor associated with the fence is immediately
marked as used and the control queue is signalled.
As of now, the callback is still called in the main worker thread
when poll_fence() is executed, but once we enable the async callback
feature in virglrenderer, the callback might be called from another
thread. This is the reason everything is protected with mutexes.
The completed_fences hash map keeps track of the latest completed
fence for each context to avoid any race condition.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Change-Id: I6f3f55d21b7f4722721bdc2b16da1b39bae4ff7e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2845984
Reviewed-by: Kaiyi Li <kaiyili@google.com>
Reviewed-by: Dennis Kempin <denniskempin@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Gurchetan Singh <gurchetansingh@chromium.org>
These values are either written by the device and read by the guest or
vice versa. Either way, since these could happen simultaneously on
separate cores we need fences to prevent the CPU from re-ordering loads
and stores.
"get" methods use acquire-load semantics while "set" methods use
release-store semantics. This also matches what we were already doing
for "get_avail_index" and "set_used_index".
With this it should be possible to re-enable the check for
VIRTIO_AVAIL_F_NO_INTERRUPT but we'll do that in a separate change since
we need these changes no matter what.
BUG=none
TEST=crostini.Basic.buster_stable
Change-Id: I2d52c92fbd7ab0fe6d64693d60f46d0dec4b4cb5
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3026685
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Currently changing the framerate during video encoding will always fail
once resources are queued on the input or output queue. This CL makes
adaptations to the crosvm encoder to fix dynamic framerate changes.
To support dynamic parameter changes the crosvm encoder will now
properly check whether values actually changed, and only report an
error if we're trying to change static parameters during encoding (such
as the output format). As a side effect this greatly reduces the amount
of times the Chrome encoder is recreated; parameters are configured
one-by-one through virtio and each parameter change requires us to
initialize an encoder, as we only know the coded size after the
initialized encoder calls the RequireBitstreamBuffers() callback.
BUG=b:192623395,b:192419592
TEST=android.media.gts.RtcVideoCodecTest#testDynamicFramerateChangeVp8
Change-Id: I20e60013dbdf9f4b139c795f503c6a08a7d3e6e9
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3005194
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: David Staessens <dstaessens@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Add vhost-user device of mac80211_hwsim that connects to
the unix socket of vhost server for mac80211_hwsim for
emulating Wifi device at crosvm.
Add cmdline flag --vhost-user-mac80211-hwsim for
specifying unix socket path to connect.
BUG=b:182577273
TEST=At Android's source tree,
lunch aosp_cf_x86_64_phone-userdebug &&
m PRODUCT_ENFORCE_MAC80211_HWSIM=true &&
launch_cvd \
--vhost-user-mac80211-hwsim=${VHOST_SOCKET_PATH}
Check AndroidWifi appears at wifi connection settings.
Change-Id: I33e5d8fed59c84d3848bfe24d935ce973d758e12
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3020848
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Commit-Queue: JaeMan Park <jaeman@google.com>
This change is a refactoring of the initial Console backend
implementation to make use of already-existing serial console
initialization code. It allows us to leverage from already-existing code
for alternative input/output files.
BUG=b:192517623
TEST=run crosvm with vhost-user-console and no changes are detected
Change-Id: I433cad1fac8f415173aee06b8ad1c96eb8f6690b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/3023804
Commit-Queue: Morg <morg@chromium.org>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Auto-Submit: Morg <morg@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
- Adds the ability to start/stop background thread on demand
- Changes the way audio data is injected to not assume how the data is
kept by users of the api
- Adds new functions for jacks and chmaps
- Rename constants to match the name used in the virtio-snd spec
BUG=b:174713663
Change-Id: Ie0fe20747a26122258cb63bac09ec0347f13ecc0
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2983388
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Jorge Moreira Broche <jemoreira@google.com>
Reviewed-by: Chih-Yang Hsia <paulhsia@chromium.org>
page_size_mask in IOMMU device configuration contains the bitmask of all
page sizes that can be mapped. It's good to get this information from host
VFIO/IOMMU driver, so that the guest is able to issue DMA mapping requests
with page size as large as possible to reduce the number of DMA map requests.
BUG=b:181736020
TEST=--vfio=/sys/bus/pci/devices/0000:00:14.0,iommu=on
Change-Id: I4c003473a48688cbdde0ff162dd0b414926d5c88
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2757277
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: David Stevens <stevensd@chromium.org>
Commit-Queue: David Stevens <stevensd@chromium.org>
By default virtio-IOMMU is disabled. It can be enabled per pass-through
device. Sample command lines:
default: virtio IOMMU disabled on pass-through device:
--vfio=/sys/bus/pci/devices/0000:00:02.0
Explicitly disable virtio IOMMU:
--vfio=/sys/bus/pci/devices/0000:00:02.0,iommu=off
Enable virtio IOMMU on the desired pass-through device:
--vfio=/sys/bus/pci/devices/0000:00:02.0,iommu=on
BUG=b:181736020
TEST=passthru one device with iommu=on
TEST=passthru two devices with iommu=on from different VFIO group
TEST=passthru two devices with iommu=on from same VFIO group
TEST=passthru one device with iommu=on and another device with iommu=off
Change-Id: Id74d2210f774a90ba5e83671e76e061cb8fec758
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2757276
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: David Stevens <stevensd@chromium.org>
Commit-Queue: David Stevens <stevensd@chromium.org>
This is to backport virtio IOMMU backend driver from Cloud-hypervisor,
which emulates an IOMMU device to manage DMA from one or more endpoints
in the guest.
Some differences from the Cloud-hypervisor implementation:
- Simplified the mapping between IOMMU driver and Vfio container
- This port supports multiple endpoints attach to same IOMMU domain.
BUG=b:181736020
TEST=bin/clippy, functional tests specified in the patch
"iommu: enable virtio IOMMU driver"
Change-Id: I3db3b46a72e82908459e91a4e6852a335c606db1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2846421
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: David Stevens <stevensd@chromium.org>
Commit-Queue: David Stevens <stevensd@chromium.org>
In preparation for virtio IOMMU support, implement global variables
IOMMU_CONTAINERS and NO_IOMMU_CONTAINER to hold the VFIO containers
for VFIO devices with or without IOMMu enabled respectively.
Also implement vfio_get_container()help create VFIO container based
on the more complicated policies.
- all VFIO devices without attaching to virtio IOMMU devices share
one VFIO container.
- for IOMMU enabled devices, one VFIO container manages all devices
under one VFIO group.
- we don't support multiple IOMMU groups set to one VFIO container.
Currently don't see an user case for this.
BUG=b:181736020
TEST=unit tests.
Change-Id: I44d792cbc8ca9696c1da54c571aad1b94c7f665d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2976054
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: David Stevens <stevensd@chromium.org>
Commit-Queue: David Stevens <stevensd@chromium.org>
One KVM_DEV_TYPE_VFIO instance may be created per VM. Currently this
device is created from VfioContainer::init(), which makes it not able
to create multiple vfio container.
This patch creates the KVM_DEV_TYPE_VFIO virtual device before creating
any VfioContainer or VfioDevice instances, and passes it into the
VfioDevice constructor where it's actually used. In this way, it's
possible to create multiple VFIO containers
BUG=b:181736020
TEST=passthru multiple devices and create more than one VFIO containers
Change-Id: I4b4e4941363efa91f2217af385f4f00eadd041c5
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2976053
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: David Stevens <stevensd@chromium.org>
Long-term libvda will be replaced with an implementation that can
function outside of ChromeOS.
In the meantime thes allows crosvm to be built externally and pass
clippy with all features enabled.
BUG=b:191507399
TEST=Tests in crosvm and cros_sdk both pass:
$ ./test_all
$ cros_run_unit_tests --package=crosvm
Cq-Depend: chromium:2989315, chromium:2986403
Change-Id: Ic37bda4426d69d16cb4bc0d7ba6f81052f6f2f59
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2983505
Tested-by: Dennis Kempin <denniskempin@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Dennis Kempin <denniskempin@google.com>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Add a new vhost-user device binary implementation.
Example command to launch the device:
vhost-user-console-device --socket test
BUG=b:179755825
TEST=run crosvm with vhost-user-console and the console comes up
Change-Id: I4bb06e058523b73cb01fbe993e0fe7f9e4ee6423
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2951187
Auto-Submit: Morg <morg@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Keiichi Watanabe <keiichiw@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Morg <morg@chromium.org>
This adds a vhost-user console to the vmm, which will be enabled by
`--vhost-user-console <socket path>` option.
BUG=b:179755825
TEST=launch crosvm with --vhost-user-console and connection happens
Change-Id: I6339c6cde3a221fd3e6a1652474e17344c73d6d3
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2814058
Auto-Submit: Morg <morg@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Keiichi Watanabe <keiichiw@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Commit-Queue: Morg <morg@chromium.org>
The output buffers must all have the same pixel format, therefore it
doesn't make sense to pass it with each buffer we import. Instead, pass
it alongside the number of output buffers (before any buffer is
imported) and let the backend remember it.
BUG=b:161774071
BUG=b:169295147
TEST=arc.VideoDecodeAccel.h264_vm passes on hatch
TEST=arc.VideoEncodeAccel.h264_360p_i420_vm passes on hatch
Change-Id: I1890ad24f9874ed3c674a7bdf7d4be303ba24e92
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2983094
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Chih-Yu Huang <akahuang@chromium.org>
Reviewed-by: Keiichi Watanabe <keiichiw@chromium.org>
Methods that mutate the backend should take a mutable reference to self.
This problem was not apparent with the VDA backend since libvda's
methods themselves are not mutable, but this will cause issues with
backends that include more of their own data.
BUG=b:161774071
BUG=b:169295147
TEST=arc.VideoDecodeAccel.h264_vm passes on hatch
TEST=arc.VideoEncodeAccel.h264_360p_i420_vm passes on hatch
Change-Id: I61cc64b6cbb9f4d1633c6a0acc188bbfc8dd0c54
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2983093
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Keiichi Watanabe <keiichiw@chromium.org>
This is useful for e.g. unit tests.
BUG=b:161774071
TEST=arc.VideoDecodeAccel.h264_vm passes on hatch
TEST=arc.VideoEncodeAccel.h264_360p_i420_vm passes on hatch
Change-Id: Ica409926c9da6c788a60134fa3f609db97f4aaa4
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2983092
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: David Staessens <dstaessens@chromium.org>
Reviewed-by: Keiichi Watanabe <keiichiw@chromium.org>
We are using similar structures for describing the planes of a frame in
the decoder and encoder. Consolidate them into a single structure
accessible from the shared format module.
BUG=b:161774071
TEST=arc.VideoDecodeAccel.h264_vm passes on hatch
TEST=arc.VideoEncodeAccel.h264_360p_i420_vm passes on hatch
Change-Id: I289c896e022cbb0952a1f2be626b3f8a6caaf13e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2983091
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Alexandre Courbot <acourbot@chromium.org>
Auto-Submit: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: David Staessens <dstaessens@chromium.org>
Reviewed-by: Keiichi Watanabe <keiichiw@chromium.org>
The interface to return the event pipe for a backend currently requires
a &File to be returned, which is not very appropriate since the file
only serves as a proxy to the pipe's file descriptor.
Although libvda uses this structure to return its event pipe, this won't
be the case for all backends, so change the interface to return a
non-owned Descriptor, which is more generic and suitable to the task.
BUG=b:161774071
TEST=arc.VideoDecodeAccel.h264_vm passes on hatch
TEST=arc.VideoEncodeAccel.h264_360p_i420_vm passes on hatch
Change-Id: I73dc66ba59e023a77d7b8e0efe533ec7805cf441
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/2983090
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Alexandre Courbot <acourbot@chromium.org>
Auto-Submit: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Keiichi Watanabe <keiichiw@chromium.org>
Reviewed-by: David Staessens <dstaessens@chromium.org>
